Match the terms below to the correct definitions
3. Atom
1. The mass on the periodic table.
b. Electrons
2. Region surrounding the nucleus where electrons are found.
C. Protons
3. Positively charged center of an atom.
d. Neutrons
4. Particles that differ in number between isotopes.
e. Electron
cloud
5. Vertical column in the periodic table.
1. Nucleus
6. Positively charged particles in an atom.
R. Quark
7. Negatively charged particles in the outermost energy levels of the electron cloud.
8. Table that organizes the elements by properties.
9. Atoms of the same element that have different masses.
h. Atomic
number
1. Mass number
10. Smallest known particle that makes up protons and neutrons.
j. Average
atomic mass
11. All elements in the same one of these has the same number of energy levels in
their electron cloud.
k. Isotopes
12. The smallest form of matter that still retains the properties of an element.
1. Valence
electrons
13. Negatively charged particles in an atom.
m. Group
14. The sum of protons and neutrons in an atom.
n. Period
15. Represents the identity of an element.
o. Periodic
Table

Match The Terms Below To The Correct Definitions3. Atom1. The Mass On The Periodic Table.b. Electrons2.

Answers

Answer 1

Answer:

Explanation:

1=i

4=d

5=m

6=c

8=o

9=j

10=a

13=b

14=h

15=l

Theses are the ones i knew


Related Questions

When many earthquakes are studied, there is another common pattern that emerges: a "Shadow Zone". This is an area, for any earthquake, on the Earth where direct S-waves don't arrive at all and P waves are refracted. What do you think causes these P waves to be refracted? *

Answers

Answer:

Sudden decrease in the velocity at the boundary.

Explanation:

The shadow zone is the zone of the earth from angular distances of 104° to 140° from a known earthquake that does not directly receive any P waves. Now, this shadow zone occurs as a result of S waves getting stopped completely by the liquid core and the P waves being refracted by the liquid core.

From earlier seismic discoveries, this boundary which is the shadow zone that does not directly receive any P-waves was found to be due to the fact that the P-waves were refracted inwards as a result of the sudden decrease in velocity at the boundary.

Volcanic belts form along
a.
islands in the Pacific Ocean.
b.
North American mountain ranges.
c.
the boundaries of Earth’s plates.
d.
the coast of Antarctica.


Please select the best answer from the choices provided

Answers

C. The boundaries of earths tectonic plates

During the Metric Olympics yesterday, Molly's long jump was 118.3 cm. Christy accidentally recorded her results in inches. She jumped 51.18 inches. Can you help... Who won the long jump? Christy won by about 30 cm Christy won by about 30 cm Molly won by about 25 cm Molly won by about 25 cm Christy won by about 12 cm Christy won by about 12 cm Molly won by about 10 cm

Answers

Answer: Christy won Molly by 12cm

Explanation:

Ist step

Molly's ;ong jump was 118.3cm

Christy long jump was 51.18inches

2nd Step

we change christy score to cm so we can compare

1 inch = 2.54cm.

therefore 51.18 inches = 51.18 x 2.54= 129.9972cm

Christy won molly by 129.9971cm-118.3cm=11.69 rounded to 12cm

Christy won Molly by 12cm

ANSWER ASAP PLEASE!!

What determines how many of each ion is required for an ionic compounds?

please do not look up on google!!!!

Answers

Each ion has a single charge, one positive and one negative, so we need only one ion of each to balance the overall charge. When writing the ionic formula, we follow two additional conventions: (1) write the formula for the cation first and the formula for the anion next, but (2) do not write the charges on the ions.

Do you guys have viruses wit this website

Answers

With what website???

Why are biopharmaceuticals in high demand?

Answers

Answer:

the market is largely driven by the growing population, increasing burden of chronic disease, and rising inclination toward targeted therapy.

Explanation:

also, the huge demand of biopharmaceutical is facilitated by an accelerating focus in research and related investment.

Which refers to a method that relies on sound waves and is used by different animal species for navigation,
communication, and finding food?
echolocation
analog signaling
infrared detection
o digital location
HELP FAST ILL MARK BRAINLEST

Answers

Answer:

A

Explanation:

got it on edge

An echolocation refers to a method that relies on sound waves and is used by different animal species for navigation, communication, and finding food. Therefore, option A is correct.

What is an echolocation ?

Echolocation is a method used by bats, dolphins, and other animals to locate objects using reflected sound. This enables the animals to move around in complete darkness, allowing them to navigate, hunt, recognize friends and enemies, and avoid obstacles.

(1) To hunt for prey, bats make high-frequency sounds. (2) Sound waves are used by dolphins and other toothed whales to locate prey and navigate their surroundings. (3) Nocturnal oil birds use echolocation to navigate their surroundings, particularly in low-light conditions.

Echolocation is used to help with orientation, obstacle avoidance, food acquisition, and social interactions.

Thus, option A is correct.

To learn more about an echolocation, follow the link;

https://brainly.com/question/7828418

#SPJ6

Scientists and nutritionists have long suspected that high-fructose corn syrup, used to

sweeten soft drinks, is one of the causes of childhood obesity. In a recent study, at the

University of Cincinnati, researchers found that mice that drank water with added

fructose ate less solid food, gained more weight, and put on 90% more body fat than

mice that drank only water. Scientists concluded that fructose may affect metabolism in

a way that favors fat storage.

What is the independent variable?

The mice that drank only water

The presence of fructose in their diet

The quantity of water provided

The weight gained by the mice

Answers

Answer:

The presence of fructose in their diet

Explanation:

The independent variable in an experiment is the type of variable which is changed at intervals in order to study if it has a direct effect on the dependent variable.

The dependent variable in the experiment is the amount of weight gained by the mice in each group and the control group is the mice who drank the water without the fructose added.

colonel flanders makes boxes of chicken with various numbers of pieces. He charges $ 0.40 for each piece of chicken, plus a fixed charge of $ 0.55 for the box, the rolls, etc. If Iddy Ottic bought the $6.95 box, how many piecesof chicken should the box contain?

Answers

The answer is 16 pieces of chicken
Subtract 0.55 from 6.95 and you get 6.40
The divide 6.40 by 0.40 and you get 16

Rubbing alcohol or isopropanol can be described by the chemical formula C3H7OH. One milliliter of isopropanol has a mass of 0.76 g, so its density is 0.76 g/mL. Isopropanol is often used as a cleaner or a disinfectant and evaporates when placed on warm objects. However, caution must be taken when using isopropanol, because it is also highly flammable. Which of the following is a chemical property of isopropanol?
A. One mL of isopropanol has a mass of 0.76 g.
B. Isopropanol has a density of 0.76 g/mL.
C. Isopropanol evaporates when placed on a warm object.
D. Isopropanol is flammable.

Answers

A chemical property of isopropanol : D. Isopropanol is flammable.

Further explanation

There are changes that occur in the mater: physical changes and chemical changes

Classification uses the principle of the initial and final state of the substance.

Physical changes do not form new substances, so the properties of the particles remain the same.(size,volume,shape)

Example : boiling and freezing, just change its phase form from liquid to gas or from liquid to solid

 

Chemical changes/reaction form new substances(products) that are different from the initial substances(reactants)

Example : toxic, corroded

So :

the physical properties of isopropanol :

mass, density, evaporation

the chemical properties of isopropanol :

highly flammable

Answer:

D. Isopropanol is flammable.

Explanation:

Mass, volume, temperature, phase of matter, color, texture, density, and hardness are all examples of physical properties. However, flammability is an example of a chemical property.

Chemical properties describe an object's potential to change its chemical composition. These properties depend on the types of atoms found in the object and the arrangement of those atoms (and their subatomic particles).

Calculate the heat that must be supplied to
a 532 , stainless steel vessel containing 375 g
of water to raise its temperature from 35 C
to the boiling point of water 100°C. Cs. =0.51 J/g. degrees C
Answer in units of J.

Answers

Q must be supplied = 119523.3~J

Further explanation  

The law of conservation of energy can be applied to heat changes, i.e. the heat received/absorbed is the same as the heat released  

Q in = Q out  

Heat can be calculated using the formula:  

Q = mc∆T  

Q = heat, J  

m = mass, g  

c = specific heat, joules / g ° C  

∆T = temperature difference, ° C / K  

So from the question :

Q to the system(Q supplied) = Q water + Q steel vessel(Q gained)

[tex]\tt Q~supplied=m.c\Delta T(water)+m.c\Delta T(vessel)\\\\Q~supplied=375\times 4.18\times (100-35)+532\times 0.51(100-35)\\\\Q~supplied=101887.5+17635.8=119523.3~J[/tex]

What is the atomic number of an atom?
O the number of neutrons
O the number of electrons and neutrons
O the number of protons
the number protons and neutrons

Answers

The answer is the number of protons. I hope this helps
An atom is classified by how many protons it has.

Changes in the number of neutrons will change the individual isotope of that element that the atom is, but the atomic number is always equal to the number of protons.

Also, protons + neutrons = mass number, not atomic number!

Which types of matter are made of atoms

a. Mixtures
b. Elements
C. Compounds
D. All of the above

Answers

Answer:

D all above yes I think it's all above

Answer:  D

Explanation: All of the above.

Plz mark brainliest:)

Help ASAP!!!! Plz!!!!!!!

Answers

The atomic number,protons and electrons are all the same! The neutrons you just add by 1 to the protons. The atomic mass is at the bottom. For example- for oxygen the atomic #,protons, and electrons would all be 8. The neutron would be 9 and the atomic mass is 15.999.

How many moles are in a sample of 2.39 x 10^23 atoms of sodium (Na)

Answers

Answer:

The answer is 0.4 moles

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\ [/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{2.39 \times {10}^{23} }{6.02 \times {10}^{23} } \\ = 0.39700996...[/tex]

We have the final answer as

0.4 moles

Hope this helps you

A balloon is a sphere with a radius of 5.0 m. The force of air against the walls of the balloon is 45 N. What is the air pressure inside the balloon? Surface area = 12.56 × radius² 1 Pa = 1 N/m² How would I solve this problem? What are the steps or a good way to remeber how to solve?

Answers

Answer:

0.127 N/m² or 0.127 Pa

Explanation:

From the question given above, the following data were obtained:

Radius (r) = 5 m

Force (F) = 40 N

Pressure (P) =.?

Next, we shall determine the Surface area of the sphere (i.e the balloon). This can be obtained as follow:

Surface area = 12.56 × r²

Radius (r) = 5 m

Surface area = 12.56 × 5²

Surface area = 12.56 × 25

Surface area = 314 m²

Finally, we shall determine the pressure as follow:

Force (F) = 40 N

Surface area = 314 m²

Pressure (P) =.?

Pressure = Force /Area

Pressure = 40/314

Pressure = 0.127 N/m² = 0.127 Pa

Therefore, the pressure inside the balloon is 0.127 N/m² or 0.127 Pa.

What occurs to the particles in a fluid during convection ?

Answers

Answer: what are options

Explanation:

In reality, energy conversion from burning fuel is never 100% efficient. Significant loss of energy due to heating occurs. If the generator were only 20% efficient (which is more realistic), how much energy in joules would be converted to electrical energy and how much would be lost to heat? (2 points)​

Answers

Answer:

Electrical energy = 130000000 J and Heat energy = 520000000 J

Explanation:

Multiply the amount of joules from the last question (650000000) by .20 and .80. (Which are the percentages)

Which has a smaller ionic radius than it's neutral atom?
A. Iodine
B.Cesium
C.Oxygen
D.Nitrogen

Answers

Explanation:

Caesium (Cs) has a smaller ionic radius than it's neutral atom.

because Caesium belong to Group 1 and It loses 1 electron. After losing 1 electron it gains 1 positive charge that's why caesium ionic radius become smaller as compared to neutral atom.

Therefore,

Option B is correct.

25 cm of liquid 'A' and 20 cm of liquid
'B' are mixed at 25°C and the volume of
solution was measured to be 44.8 cm3
then correct reaction is
(A) A Hmix = 0, solution shows
ideal

Answers

Answer:

The correct option is;

(B) [tex]\Delta H_{mix} < 0[/tex], solution shows negative deviation

Explanation:

The given parameters are;

The available volume of liquid A = 25 cm³

The available volume of liquid B = 20 cm³

The volume of the solution (mixture) = 44.8 cm³

Therefore, we have;

[tex]\Delta _{mix} V < 0[/tex]

Which is one of the prerequisite for the formation of negative deviation

When a non-ideal solution shows negative deviation according to Raoult's Law, we have;

[tex]\Delta _{mix} H < 0[/tex], we have more heat released due to new molecular interactions.

What is a system?
A. An isolated piece of the world
OB. A liquid in which reactions take place
O C. A piece of scientific equipment
O D. A technique for recording data

Answers

Answer:

D. a technique of recording data

choose the letter that best describes the behavior of a substance during a phase change:

/A/ neither absorbs or releases energy

/B/ always absorbs energy

/C/ always releases energy

/D/ either absorbs or releases energy

Answers

Answer:

/D/ either absorbs or releases energy

Explanation:

During a phase change energy is either absorbed or released.

A phase change is a reversible process which occurs when a substance changes is its state from one form to another.

Phase changes are used to delineate physical changes.

A phase diagram provides a graphic representation of the change. The diagram can be 2 dimensional or 3 dimensional.

Which of the following is the correct model of C7H16?
A.
B.
C.
D.

Answers

Answer:

D

Explanation:

Option D gives the correct model of C7H16. From the option, one will discover that the model has 7 carbons in the backbone. If you count the attached hydrogen, you will discover that the hydrogen is 16 in total.

This model or skeletal structure of this element represents heptane. Heptane or n-heptane is known to be a straight-chain compound and an alkane. It's chemical formula can also be written as: H₃C(CH₂)₅CH₃ or C₇H₁₆.

This compound is known to be one of the main components of gasoline. It is known to be a volatile organic compound and a clear and colorless liquids with a petroleum-like odor.

Answer: D

Explanation: Just took the test

Identify the property of the matter described below.

Alcohol floats on top of the water.
A-pH
B-conductivity
C-density
D-luster

Answers

Answer: C.

Explanation: Alcohol floats on oil and water sinks in oil. Water, alcohol, and oil layer well because of their densities, but also because the oil layer does not dissolve in either liquid. The oil keeps the water and alcohol separated so that they do not dissolve in one another. ... Water sinks because it is more dense than oil.

You are conducting an experiment with two very reactive substances. One will react with oxygen (O) and other substances in the air, and the other will react to metal in a container. What type of environment can you seal them in so they only react with each other?

Answers

Answer:

seal them in a glass container in an atmosphere of argon (Ar) gas

Explanation:

What is the mass of an object with a density of 5.7 g/cm^3 and a volume of 48
cm^3? *

Answers

Answer:

273.6 g

Explanation:

mass =(density)(volume)

mass=(5.7g/cm^3 )(48 cm^3)

cancel out your cm^3 and your are left with grams

multiply (5.7g)(48)=273.6 g

The mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.

What is density?

Density is defined as the degree to which a material is packed together.

It is also defined as a mass per unit volume of the substance.

Its SI unit is kilogram per cubic meter or  gram per meter.

Density can be expressed as

Density = mass / volume

Mass =  density x volume

As given, Density = 5.7 g/cm³

                Volume = 48 cm³

So, Mass =  5.7 g/cm³ x  48 cm³

               =  273.6 grams

Thus, the mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ5

Calculate the volume 3.00 moles of a gas will occupy at 24.0 °C and 762.4 mm Hg.

Answers

Answer:

Use formula of PV = nRT

Change formula to solve for Volume = nRT/P

R is a constant 0.08206

Convert C to Kelvin which is just +273

And turn mmHg into atm which is around 1 atm

Plug in and solve

What kinds of paintings did Winslow Homer make​

Answers

145 artworks
He was best known for drawing,
Wood engravings
Oil painting
Water color painting.
Mostly self-taught, Homer is known for the visceral force of the waves in his oil paintings, but his watercolors are an antidote to any visual heaviness and weight. As his early paintings reveal, watercolor is where he shined as an artist with a graceful, innovative hand.

Have a great day :)

If a wave of red light has a wavelength of 6.7 x 10-7 m, will the frequency of the red wave be high or low?

Answers

Answer:

Its high

Explanation:

Becuase if u times it what do u get

How does the valence electron configuration (entire last energy level configuration) relate to the group number on the Periodic Table? Use the shorthand notation in your discussion.

Answers

Answer:

The valence electron configuration determines the group to which an element belongs to.

Explanation:

The valence electron configuration of an atom of an element refers to the number of electrons in that atoms outermost shell.

The valence electron configuration is related to the group number of an element in that the number of electrons in the valence shell of an atom of an element determines the group to which an element belongs to. For example, all elements having one valence electron belong to group IA of the periodic table. Similarly, all elements having seven valence electrons belong to group VIIA of the periodic table.

This is because, since the reactivity of an element is related to its ability to either gain or lose a certain number of electrons in its valence shell, elements having same number of valence electrons have similar chemical properties.

Other Questions
WILL MARK BRAINLIEST! Can someone help me wit dis "question"?When two different sperm fertilize two eggs,a.) fraternal twins result.b.) identical twins result.c.) twins of different sexes always result.d.) twins of the same sex always result. Choose all the answers that apply.Ionic compounds _____.-do not dissolve in water-have high melting points-have low melting points-dissolve easily in water-conduct electricity when melted What is the most common isotope of lithium? x^2/(x+2) + 2 (x+2)/x^2 = 3 solve please help me with steps Why does an ion have a charge Help please:) Harriett Powers was born:A.in Africab. into slavery,C. in 1866d. in Mexico is the core of an operating system that controls its basic functions.O FreewareO KernelTweakerO Open source Help me on these questions what is the importance of human flourishing to science and technology? A rectangle has a length of 64 cm. The rectangle is reduced by a scale factor of 3/4. What is the length of the reduced rectangle? Let f (x) = 3x + 2x 1 and g (x) = x2 3x + 1Find f(x) + g(x)4x2 - x4x2 + 5x2x2 - 5x + 2 4x2 - x + 2 Why was Fort St. Louis a threat to Spain?A) It was the center of French and American Indian operations against Spain in theAmericas.B) It was a French fort within territory that Spain believed was part of New Spain.C) It was a very effective military outpost for France.D) It was the capital of a new French colony near New Spain. The movement of matter across a cell membrane against a concentration difference is called active transport , and it requires? I need help ASAP. Thank you in advance! The choices are true & false. Paul can spend no more than $24 on his pizza order. Each pizza costs $10 and there is a $4 delivery fee. How many pizzas can he order? Can someone help me write an essay about an memorable moment in your life ( it can be about you) 1 What are the endings for -IR verbs in the present tense?2 What are the endings for -ER verbs in the present tense?3 Give an example of an -AR and an -ER and an - IR INFINITIVE verb, (3 infinitive verbs total in Spanish) . I'm very bad in math help would mean alot to me Which of the following passages supports the definition of the word "slavish"?O "The crowd was unarmed."O "Thousands had come to the fair."O "There was no rebellion.""The men were practically penned in an enclosure." 3 examples of culture in the United States