Answer:
Smallest to Largest:
Clay is smaller then 1/125 mm
Silt is 1/256- 1/16 mm
Sand is 1/16-2 mm
Pebble is 2-64 mm
Cobble is 64-256 mm
Boulder is greater then 256 mm
Explanation:
Explain what lattice energy is and how it affects the properties of ionic compounds. Describe the general properties of ionic compounds.
Answer:
The force of attraction between oppositely charged particles is directly proportional to the product of the charges on the two objects (q1 and q2) and inversely proportional to the square of the distance between the objects (r2).
The strength of the bond between the ions of opposite charge in an ionic compound therefore depends on the charges on the ions and the distance between the centers of the ions when they pack to form a crystal.
An estimate of the strength of the bonds in an ionic compound can be obtained by measuring the lattice energy of the compound, which is the energy given off when oppositely charged ions in the gas phase come together to form a solid.
Explanation:
The lattice energies of ionic compounds are relatively large. The lattice energy of NaCl, for example, is 787.3 kJ/mol, which is only slightly less than the energy given off when natural gas burns.
The bond between ions of opposite charge is strongest when the ions are small.
The ionic bond should also become stronger as the charge on the ions becomes larger.
Answer:
The force of attraction between oppositely charged particles is directly proportional to the product of the charges on the two objects (q1 and q2) and inversely proportional to the square of the distance between the objects (r2). The strength of the bond between the ions of the opposite charge in an ionic compound therefore depends on the charges on the ions and the distance between the centers of the ions when they pack to form a crystal. An estimate of the strength of the bonds in an ionic compound can be obtained by measuring the lattice energy of the compound, which is the energy given off when oppositely charged ions in the gas phase come together to form a solid.
Explanation:
Got it right on edge 2020
What happens to the particles of a liquid when energy is removed from them?
A. The motion of the particles increases and the distance between the particles increases.
B. The motion of the particles increases and the distance between the particles decreases.
C. The motion of the particles decreases and the distance between the particles increases.
D. The motion of the particles decreases and the distance between the particles decreases.
Answer:
b im pretty sure it is b
Explanation b The motion of the particles increases and the distance between the particles decreases.
The motion of the particles decreases and the distance between the particles increases, the correct option is C.
What are different states of matter?The matter is anything that has mass and occupies space.
Matter can exist in four different states: solid, liquid, gas, and plasma.
By examining the arrangement of molecules, it is possible to comprehend the characteristics of the many forms of matter.
The state of a solid turns to a liquid when it is heated past its melting point.
A liquid turns into a gas when it is heated past the point at which it vaporizes.
Solids have a distinct shape and dimension and are densely packed.
Liquids fill the container's space and are loosely packed.
Gas has a large intermolecular distance and is not stiff.
When energy is removed from the particles of a liquid, the speed gets slowed, and so the motion decreases, as the motion is limited they become packed and the distance between them decreases, and the intermolecular forces increases.
To know more about Different states of matter
brainly.com/question/1134312
#SPJ6
A student has a container of sand and sugar. What characteristic could be used to separate the mixture?
Answer:
Sugar will dissolve, so water.
Explanation:
Sugar is a bicubacle food source you could say, sand will not evaporate or dissolve in the water since it is not a 3c2e source. Using water will seperate them.
Answer: Heat
Explanation:
Because is you put water and sand in a container you can separated by boiling the water and all the water would evaporate and the sand would stay.
A piece of metal is composed of atoms Each atom in the metal contains 29 protons how is the metal classified
Answer:
you an see the answer at the pic
How do you think chemical change is defined?
Answer:
A chemical change happens when one chemical substance is transformed into one or more different substances,
Explanation:
What’s this called
Please ASAP
Answer:
carbon dioxide CO[tex]{2}[/tex]
Explanation:
Double Polar Covalent bonds with CO2
Explanation:
Keep in mind that CO2 is a nonpolar molecule
What is the mass of 8.250 moles of Cu2O?
Answer:
How many moles CU2O in 1 grams? The answer is 0.0019838596354237. We assume you are converting between moles CU2O and gram. You can view more details on each measurement unit: molecular weight of CU2O or grams The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles CU2O, or 504.06792 grams. Note that rounding errors may occur, so always check the results. Use this page to learn how to convert between moles CU2O and gram. Type in your own numbers in the form to convert the units
Please help me thank you! Stay safe
Answer:
number 3
Explanation:
Explanation:
it's the third graph
values are put directly without scaling
whats the lewis dot diagram for calcium
Draw the Lewis dot structure for each atom of the compound to show how many valence electrons are present in each atom. For example, the calcium atom in calcium chloride, CaCl2, has two valence electrons, and the chlorine atoms have seven valence electrons each.
What do eukaryotic cells, prokaryotic cells and viruses all have in common?
Answer:
Like a prokaryotic cell, a eukaryotic cell has a plasma membrane, cytoplasm, and ribosomes, but a eukaryotic cell is typically larger than a prokaryotic cell, has a true nucleus (meaning its DNA is surrounded by a membrane), and has other membrane-bound organelles that allow for compartmentalization of functions.
Explanation:
is this okay???
What would happen to the rate of a reaction if the concentration of substrate was increased after the point of saturation?
a)The reaction rate would increase.
b)The reaction rate would decrease.
c)There would be no effect.
Answer:
there would be no effect
Explanation:
A helium-filled balloon is released into the atmosphere. As the balloon rises, which
would MOST likely increase and cause the balloon to burst?
O the volume of the helium
O the mass of the helium
o the temperature of the helium
O the density of the helium
Once upon a time, Walter the water molecule was traveling around Linda's blood. He was enjoying moving around wherever he wanted. One day, Walter decided to visit some cells. He traveled in and out of the cells as he pleased. Walter decided that he liked the cells so much that he wanted to stay inside and rest in the vacuole. However, as the day went on, Walter felt a change happening around him. Linda had eaten some VERY salty popcorn. Walter LOVED Sally the salt molecule and felt a magnetic attraction to her. The closer the salt came to the cell, the quicker Walter's love for Sally pulled him out of the cell and towards the salt.
Answer:
This story that is related to the movement of water in relation to the amount of solute seeks to explain the process of OSMOSIS in a very interesting way.
Explanation:
The OSMOSIS process is a process where water diffuses from a compartment with fewer solutes to one with higher solutes, that is why the osmotic intention is to balance the concentrations and molarities between both compartments, this is called osmotic balance.
For this to happen, a highly water-permeable barrier is needed.
All of the following are examples of making physical changes EXCEPT:
A:painting walls
b:Making ice cubes
C:Making oxygen out of water
D:chopping wood
You put a drop of food coloring into a container of room temperature water and watched as the color spread out in the water. Describe what caused the color to spread. (You do NOT stir it)
Answer:the dye is heavier than the water so the substances fuse together instead of sitting at the top much like the phenomenon with oil and water combination
Have a good day!
what is the standard form of 12,341 us?
Answer:
12341 in standard form = 1.2341 × 10⁴
Explanation:
When you split the number 12341 into a coefficient and a power of 10 you do get 12341 in exponential form, but there is an indefinite number of possibilities.
As you probably want 12341 in normalized scientific notation, the coefficient or significand of 12341 in scientific notation must be in the interval [1,10[.
As there are many ways to express 12341 in scientific notation, in this post we mean 12341 in normalized scientific notation, unless stated otherwise. Therefore:
12341 in scientific notation = 1.2341 × 10⁴.
This can also be expressed as 1.2341 × 10⁴, using the caret symbol, or as 1.2341e+4, which is called 12341 in e-notation.
Convert each of the following masses to the units requested.
a. 0.765g to kilograms
b. 1.34 g to milligrams
c. 34.2mg to grams
Answer:
a) 0.000765kg
b) 1340mg
c) 0.0342g
Explanation:
a) 1000g = 1kg
0.765g= 0.765/ 1000
= 0.000765g
b) 1g = 1000mg
1.34g = 1.34 × 1000
= 1340mg
c) 1000mg = 1g
34.2mg = 34.2/1000
= 0.0342g
Chromium-48 decays. After 6 half-lives, what fraction of the original nuclei
would remain?
Answer:
The fraction of original nuclei remaining is 1.5625
Explanation:
-79.6 -80 -81.2. is the correct answer
When coal is burned, sulfur is released into the air, where it reacts with oxygen to produce sulfur dioxide and sulfur trioxide. Which of the following is true of this process?
A. The identity of each reactant remains the same.
B.Sulfur dioxide and sulfur trioxide are the reactants in this change.
C.The products have different chemical properties than those of the reactants.
D. The products contain more sulfur atoms and fewer oxygen atoms than the reactants.
Answer:
c
Explanation
they have different properties now
Driving automobiles and burning coal for electricity are examples of two human activities that negatively impact _______.
Answer:
I think its pollution?
Please help me immediately I will mark you as brainiest.
how many atoms in a chair
Answer:
100 trillion atoms are in one cell and so just find how many cells are in a chair and then take 100xthe number and you get your answer
Explanation:
There are uncountable atoms which are present in a chair depending on it's size.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ2
how many electrons does Neon-21 have?
Answer:
10 electrons
Explanation:
Neon 21 has 10 protons and 11 neutrons. We know that there are the same number of electrons as there are protons. so your answer is 10.
Prototypes are used to
a. communicate a solution.
b. test the operation of a product.
c. identify a need.
d research a problem.
Answer:
Test the operation of the product
Explanation:
In Ernest Rutherford's gold foil experiments, some alpha particles were deflected from their original paths, but most passed through the foil with no deflection. Which statement about gold atoms is supported by these experimental observations?
Gold atoms consist mostly of empty space.
Gold atoms are similar to alpha particles.
Alpha particles and gold nuclei have opposite charges.
Alpha particles are less dense than gold atoms.
Answer:
A
Explanation:
Please Helpp
Which organelle is correctly matched with the cell process it performs?
A Vacuole — photosynthesis in plant leaf tissue
B Chloroplast — water storage in plant leaf tissue
C Mitochondria — energy production in plant and animal tissue
D Cell wall — supporting the cell in animal tissue
Answer:
Mitochondria - energy production in plant and animal tissue
Explanation:
The mitochondria is the power house of a cell. it contains adenosine-tri- phosphate or ATP molecules that produce energy through active transport. The mitochondria is responsible for energy production in both plant and animal cells
Calculate the molarity of a NaOH solution that is prepared by diluting 100mL of 0.20M NaOH with 150mL of H2O.
Molarity of solution = 0.08 M
Further explanationMolarity shows the number of moles of solute in every 1 liter of solution or mmol in each ml of solution
[tex]\tt M=\dfrac{n}{V}[/tex]
Where
M = Molarity
n = number of moles of solute
V = Volume of solution
mol of NaOH[tex]\tt mol=0.2~M\times 100~ml=20~mlmol=0.02~mol[/tex]
molarityVolume of solution = 100 ml + 150 ml = 250 ml
[tex]\tt M=\dfrac{0.02~mol}{0.250~L}=0.08[/tex]
which one only has one type of
atom In it.
Element , compound
Answer:
element
Explanation:
What factors are included on a phase diagram?
O A. Temperature and pressure
O B. Pressure and volume
O C. Mass and volume
O D. Heat and kinetic energy
Answer:
A. Temperature and pressure
Explanation:
The factors included in a phase diagram are the temperature and pressure conditions.
A phase diagram is a combined plot of three curves all in equilibrium;
Solid- liquid, liquid -gas, and solid -gas plots
On the vertical axis, we usually have the pressureOn the horizontal axis is where the temperature is represented. Most phase diagrams are used in chemistry and mineralogy to show areas in which different phases can exist at equilibrium.The factors included on a phase diagram are temperature and pressure and the correct option is option A.
A phase diagram is a graphical representation that shows the different phases of a substance (solid, liquid, and gas) as a function of temperature and pressure. It provides valuable information about the conditions at which different phases can exist and the boundaries between them.
The temperature is typically plotted on the horizontal axis, while the pressure is plotted on the vertical axis.
By examining a phase diagram, one can determine the melting point, boiling point, and critical point of a substance, as well as the regions of stability for each phase. Additionally, phase diagrams can reveal the existence of phase transitions such as melting, boiling, and sublimation.
Thus, the ideal selection is option A.
Learn more about Phase diagram, here:
https://brainly.com/question/34149833
#SPJ6