Jeffrey is using a pulley to get water from a well. He loops a rope over the top of a pulley wheel, then ties the rope to a bucket. He lowers the bucket into the water. To bring the bucket and water up from the well, Jeffrey pulls down on his end of the rope. Why does Jeffrey apply a pulling force to the rope? A. because adding his force to the force generated by the pulley will get the job done faster B. to test the tension in the rope before he uses it to climb down into the well C. to signal to the pulley to start drawing water from the well D. because work must be done on the pulley before it can do work on the bucket​

Answer:

Actually I know but I can't cause it will take time

Answer:

hindi ko gets

Explanation:

ang gulo naman nyan

Answer:

take some sharp mixture of iron spread it from up the magnet you will see the magnetic field of magnet

Answer:

F = 2.69 10⁻³ m   [ N]

Explanation:

This exercise asks to calculate the gravitational field of the Earth on the lunar surface, let's use the universal gravitation law

          F = G m M / r²

where m is the mass of the body, M the mass of the Earth and r the distance between the Earth and the Moon

         F = (G M / r²) m

         F = (6.67 10⁻¹¹ 5.98 10²⁴ / (3.85 10⁸)² ) m

         F = 2.69 10⁻³ m   [ N]

This force is directed from the Moon towards the Earth, therefore it reduces the weight of the body

Answer:

0.5

Explanation:

Answer:

voltage= 17.88volts

current= 0.04 amps

Explanation:

Step one:

given data

resistance R=400 ohms

Power P= 0.8W

a.  What is the maximum voltage that can be applied across this resistor without damaging it?

the expression relating power and voltage is

P=V^2/R

substituting we have

0.8=V^2/400

V^2=0.8*400

V^2=320

V=√320

V=17.88 volts

the maximum voltage is 17.88volts

b.What is the maximum current it can draw?

we know that from Ohm' law

V=IR

17.88=I*400

I=17.88/400

I=0.04amps

Answer:

y becomes doubled.

Explanation:

If;

       y  = [tex]\frac{k}{x}[/tex]  

what is the state of y when x is halved;

  the given expression is an inverse relationship. When y increases, x is supposed to decrease and vice versa.

 if x is halved; x  = [tex]\frac{x}{2}[/tex]

           [tex]\frac{k}{\frac{x}{2} }[/tex]   = [tex]\frac{2k}{x}[/tex]  

Now compare :

      [tex]\frac{k}{x}[/tex]  :  [tex]\frac{2k}{x}[/tex]

we see that y becomes doubled

Answer:

Work done, W = 24.9001 J

Explanation:

Given that,

Force, F = (2xî + 4yĵ) Where x and y are in meters

This force acts on an object as the object moves in the x-direction from the origin to x = 4.99 m.

We need to find the work done by the force on the object. It is given by :

[tex]W=\int\limits^a_b {F dr} \\\\W=\int\limits^{4.99}_0 {(2xi+4yj)dx} \\\\W=\int\limits^{4.99}_0 {2xi\ dx} \\\\W=x^2|_0^{4.99}\\\\\text{Applying limits}\\\\W=(4.99)^2-0^2\\\\W=24.9001\ J[/tex]

So, the work done is 24.9001 J.

Answer:50

Explanation:

The current flowing through the given circuit is 0.12 A.

The given parameters;

The current passing through the headlight is calculated by applying Ohms law as shown below;

V = IR

where;

Substitute the given parameters and solve the current flowing in the circuit;

[tex]V = IR\\\\I = \frac{V}{R} \\\\I = \frac{12}{10} \\\\I = 0.12 \ A[/tex]

Thus, the current flowing through the given circuit is 0.12 A.

Learn more here:https://brainly.com/question/18515095

Answer:

Weather is the conditions (temperature, wind etc.) at a given time, like on that day. Climate, which is what his data would show, is the conditions over an extended period of time like the 3 months he collected data

During a time interval of 2hr, 47min and 10s, 6.25× [tex]10^{28[/tex] electrons pas through the wire.

A negatively charged subatomic particle known as an electron can either be free or attached to an atom (not bound). One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons.

Given parameter:

The electron pass through a wire in 1s = 6.24 × [tex]10^{18}[/tex].

The time interval = 2 hour 47 minute 10 second.

= (2×60×60 + 47×60 +10) second = 1030 second.

Total number of electrons pass through the wire during the time interval = number of electrons pass per second × time interval in second.

= 6.24×[tex]10^{24[/tex]×1030

= 6.25× [tex]10^{28[/tex].

Hence, total number of electrons  pass during a time interval of 2hr, 47min and 10s is 6.25× [tex]10^{28[/tex].

Learn more about electron here:

https://brainly.com/question/1255220

#SPJ2

​

Answer:

The volume of the balloon will increase when temperature rises, and the volume of the balloon decreases to its initial value as temperature cools down.

Explanation:

An inflated balloon contains a definite amount of gas. Since the temperature varies, its volume would vary with respect to temperature.

The increasing temperature causes an increase in the average kinetic energy of the molecules of the gas inside the balloon. Therefore, the volume of the balloon increases as the temperature rises.

As the temperature cools down, assuming that the balloon didn't burst in the process, the kinetic energy of the molecules of the gas decreases. So that the  volume of the balloon decreases to its initial value.

Answer:

Poetic

Explanation:

I took the test

Answer:

Poetic

Explanation:

I got it right on the test

Answer:

he is right he Is

Explanation:

step by step explanation

Answer:

The average coefficient of static friction = 0.130

Explanation:

The average coefficient of static friction = [tex]\frac{sum of coefficient of static friction}{number of trials}[/tex]

From the given question, the coefficient of static friction given are:

0.053, 0.081, 0.118, 0.149, 0.180, 0.198

Thus,

the sum of the given coefficient of static friction = 0.053 + 0.081 + 0.118 + 0.149 + 0.180 + 0.198

                                             = 0.779

The average coefficient of static friction = [tex]\frac{0.779}{6}[/tex]

                                             = 0.129833

                                             = 0.130

Therefore, the average coefficient of static friction is 0.130.

[tex]{\underline{\green{\textsf{\textbf{ Answer : }}}}}[/tex]

➡ 0.96 pounds in a minute.

Answer:

real world examples

Explanation:

concave wave rock- The wave rock is formed by weathering of the surrounding area, which helps in proving the deposition part, as the wave rock was below the ground, occurred due to deposition of rock years over years. It is made from very tough material from its surrounding. The weathering reduced the surrounding terrain, while the bedrock remained to witness for the history.  --Also, volcanic eruptions have changed earth greatly. EX- Ash and sulfur went into Earth's atmosphere because of the Tambora eruption which dimmed incoming sunlight. It lowered global temperatures by about 3°F. The Mount Pinatubo of 1991 that erupted in the Philippines cooled the planet by about 1°F.

Answer:

The average force ≅ 519.44 N.

Explanation:

Impulse = change in momentum of a body

i.e Ft = m(v - u)

where F is the force, t is the time, m is the mass of the body, v is the final velocity and u is the initial velocity.

m = 55.0 g (0.055 Kg), t = 0.00360 s, v = 34.0 m/s, since the ball was initially at rest; u = 0 m/s

So that,

F x 0.00360 = 0.055(34 - 0)

F x 0.00360 = 0.055 x 34

                    = 1.87

F = [tex]\frac{1.87}{0.0036}[/tex]

 = 519.4444

The average force exerted on the ball by the club is approximately 519.44 N.

Answer:

N = 470 [N]

Explanation:

The normal force is defined as the reaction exerted by the surface where the body is located in the opposite direction to the weight component.

It can be easily calculated by means of the product of mass by gravitational acceleration.

N = m*g

where:

N = normal force [N] (units of Joules)

m = mass = 47 [kg]

g = gravity acceleration = 10 [N]

N = 47*10

N = 470 [N]

Answer:

The acceleration at the moment the train speed reaches 52 kilometers per hour is approximately 1.826 meters per square second.

Explanation:

According to Rotational Physics, the total acceleration of the train rounding the horizontal turn is a combination of tangential ([tex]a_{t}[/tex]) and radial accelerations ([tex]a_{r}[/tex]), measured in meters per square second. The former one represents the change in the magnitude of the velocity, whereas the latter one represents the change in its direction. By definition of magnitude and Pythagorean Theorem we get that magnitude of total acceleration ([tex]a[/tex]), measured in meters per square second, is:

[tex]a = \sqrt{a_{r}^{2}+a_{t}^{2}}[/tex] (Eq. 1)

Magnitudes of tangential and radial accelerations are determined by using the following formulas:

[tex]a_{t} = \frac{v_{f}-v_{o}}{t}[/tex] (Eq. 1)

[tex]a_{r} = \frac{v_{f}^{2}}{R}[/tex] (Eq. 2)

Where:

[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds, measured in meters per second.

[tex]t[/tex] - Time, measured in seconds.

[tex]R[/tex] - Radius, measured in meters.

If we know that [tex]v_{o} = 24.444\,\frac{m}{s}[/tex], [tex]v_{f} = 14.444\,\frac{m}{s}[/tex], [tex]t = 18\,s[/tex] and [tex]R = 120\,m[/tex], then the magnitude of the total acceleration when the train speed reaches 52 kilometers per hour is:

[tex]a_{t} = \frac{14.444\,\frac{m}{s}-24.444\,\frac{m}{s} }{18\,s}[/tex]

[tex]a_{t} = -0.556\,\frac{m}{s^{2}}[/tex]

[tex]a_{r} = \frac{\left(14.444\,\frac{m}{s} \right)^{2}}{120\,m}[/tex]

[tex]a_{r} = 1.739\,\frac{m}{s^{2}}[/tex]

[tex]a = \sqrt{\left(-0.556\,\frac{m}{s^{2}} \right)^{2}+\left(1.739\,\frac{m}{s^{2}} \right)^{2}}[/tex]

[tex]a \approx 1.826\,\frac{m}{s^{2}}[/tex]

The acceleration at the moment the train speed reaches 52 kilometers per hour is approximately 1.826 meters per square second.

Answer:

[tex]\huge\boxed{\sf Hen's \ Egg}[/tex]

Explanation:

Seen with an unaided eye means that is visible to the naked eye.

So,

Hen's Egg can be seen with an unaided eye.

However, Red Blood Cells (RBCs) and Sperm cells need a microscope for them to be seen!

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

C. the help our understanding of the formation of planetary bodies.

Explanation:

this is the answer of PLATO

Answer:

Explanation:

3

Answer:

4.5s

Explanation:

u=30m/s

v=50m/s

s=180m

a=constant(given)

By third equation of motion,    v  

2

=u  

2

+2as

(50)  

2

=(30)  

2

+2a(180)

a=  

3

40

​  

m/s  

2

By first equation of motion,    v=u+at

50=30+(  

9

40

​  

)t

t=  

2

9

​  

=4.5sec

Complete Question

The complete question is shown on the first uploaded image

Answer:

a

  [tex]p = 14033.7 \ kg\cdot m/s[/tex]

b

  [tex]v = 1.22 \ m/s[/tex]

c

 [tex]m_2 = 9506.7 \ kg[/tex]  

Explanation:

From the question we are told that

     The mass of the coal car is  [tex]m_1 = 4527 \ kg[/tex]

     The velocity is  [tex]v_i = 3.1 \ m/s[/tex]

     The load of coal dropped is [tex]m_2 = 6952 \ kg[/tex]

Generally the momentum of the system before the coal is added is mathematically represented as

            [tex]p = m_j * v_i[/tex]

=>         [tex]p = 4527 * 3.1[/tex]

=>         [tex]p = 14033.7 \ kg\cdot m/s[/tex]

Generally from the law of momentum conservation is mathematically represented as

          [tex]m_1 * v_i + m_2 * v_2 = (m_1 + m_2 )v[/tex]

Here [tex]v_2[/tex] is the velocity of the load before it is dropped and the value is 0 m/s

So

 =>    [tex]v =\frac{m_1 * v_i }{m_1 + m_2}[/tex]

      [tex]v = \frac{4527 * 3.1 }{( 4527 + 6952 )}[/tex]

=>    [tex]v = 1.22 \ m/s[/tex]

When v =  1m/s  and  [tex]m_1[/tex] remain the same

Then

=>    [tex]1 =\frac{4527 * 3.1 }{4527 + m_2}[/tex]

=>    [tex]4527 + m_2 = 14033.7[/tex]

=>    [tex]m_2 = 9506.7 \ kg[/tex]  

Answer: Example of ground water

Explanation: Groundwater is part of the hydrologic cycle, originating when part of the precipitation that falls on the Earth's surface sinks (infiltrates) through the soil and percolates (seeps) downward to become groundwater.

Answer:

(a) The time taken for the plane to reach 50 km/hr is 811.97 s

(b) (i) the acceleration of the plane is 0.012 m/s²

    (ii) The time taken for the plane to reach 50 km/hr is 1172.85 s

Explanation:

Given;

mass of the freight train, m = 3.8 x 10⁷ kg

force applied to pull the train, F = 6.5 x 10⁵ N

a. How long does it take the train to go from rest to 50 km/hr?

Given;

initial velocity, u = 0

final velocity, v = 50 km/hr = 13.889 m/s

Apply Newton's second law of motion to determine the time traveled by the train at the given speed;

[tex]F = ma = \frac{m(v-u)}{t}\\\\t = \frac{m(v-u)}{F}\\\\t = \frac{3.8*10^7(13.889-0)}{6.5*10^5}\\\\t = 811.97 \ s[/tex]

(b)

(i) the acceleration of the plane

Given;

air resistance, = 2.0 x 10⁵ N

Apply Newton's second law of motion;

∑F = ma

6.5 x 10⁵ N - 2.0 x 10⁵ N = ma

4.5 x 10⁵ N = ma

[tex]a = \frac{4.5 * 10^5 }{m}\\\\a = \frac{4.5 * 10^5 }{3.8*10^7}\\\\a = 0.012 \ m/s^2[/tex]

(ii) time taken for the plane to reach 50 km/hr is given by;

[tex]F = \frac{m(v-u)}{t}\\\\t = \frac{m(v-u)}{F}\\\\t = \frac{3.8*10^7(13.889-0)}{4.5*10^5}\\\\t = 1172.85 \ s[/tex]

Answer:

It allows electrons to flow from one part of the circuit to another

when it is closed.

Explanation:

hope this helps <3 !!

Answer: D

Explanation: