I need this now due date 9-11-20 1:00pm
Answer:
Yes because the hotter the water the less time it takes to dissolve.
Explanation:
What conversion do you use to change 18 km to meters
Answer:
multiplication
Explanation:
multiply your distance of 18 kilometers by 1,000 to get 18,000 meters.
55. A dog starts at the origin and runs forward at 6 m/s for
1.5 s and then turns around to fetch the ball by
running backward at 7 m/s for 3 s. If the dog runs
back to the origin at 4 m/s, then how much time has
elapsed between the start and when he returns with
the ball?
0-
Position vs. time
61
-5
-10
Position (m)
-15
-20
-250
0.2
0.8
1.0
1.2
0.4 0.6
Time (s)
Answer:
7.5 seconds
Explanation:
Given that a dog starts at the origin and runs forward at 6 m/s for 1.5 s
From speed formula
Speed = distance/time
Substitute speed and time into the formula
6 = distance/1.5
Distance = 6 × 1.5 = 9 m
and then turns around to fetch the ball by
running backward at 7 m/s for 3 s. If the dog runs.
Calculate the distance covered
Distance = 7 × 3 = 21 m
This means that the dog ran beyond the original position.
The elapsed distance = 21 - 9 = 12m
back to the origin at 4 m/s, by covering distance 12 m
Calculate the time.
Speed = distance/time
Time = 12/4 = 3s
The time elapsed between the start and when he returns with the ball will be:
T = 1.5 + 3 × 3
T = 7.5 seconds
The table shows results of an experiment that was replicated. Which best describes the data? They are neither precise nor reproducible. They are precise but not reproducible. They are accurate and reproducible. They are accurate but not reproducible.
Answer:
They are accurate and reproducible.
Explanation:
Answer:
They are precise and reproducible.
Explanation:I just took the test on Edgenuity
The density of water is 1.00 g/mL. This means if a rock has a density of 0.87 g/mL, it will ____in water.
a) float
b) sink
Answer:
Float
Explanation:
It is given that,
The density of water is 1 g/mL
The density of a rock is 0.87 g/mL
It can be seen that the density of water is more than that of rock. The density of an object is calculated from its mass and volume.
If the density of liquid in which it is placed, is more that that of the object, it will float at the top.
Hence, in this case the rock will float.
what weights include barbells and dumbbells
what is 404.2 rounded to the nearest ten thousandth?
Answer:
The answer to your question is 404.2000
A swimming pool is an example of an open system. The pool loses 10,500 J
of its thermal energy to the surrounding air at night, and the surrounding air
adds 2,500 J of thermal energy to the pool in the morning. According to the
law of conservation of energy, what is the total change in energy?
Answer: A a decrease of 8000
Explanation: 10,500 - 2,500= 8000
Answer:
Its A
Explanation: Sure
1. The speed limit on a particular freeway is 28.0 m/s (about 101 km/hour). A car
that is merging onto the freeway is capable of accelerating at 2.25 m/s2. If the car
is currently traveling forward at 13.0 m/s, what is the shortest amount of time it
could take the vehicle to reach the speed limit? How far would the car travel in
this time?
Answer:
the speed limit 6 seconds and the car will travel in 90m
2. Convert 750 m/s to km/hr.
Answer:
2700
Explanation:
1m/s=3.6km/hr
What is the unit of pressure? Why is it called a derived unit?
Why has SI system
Answer:
pascal
Explanation:
its obtained after either division or multiplication
A ray of light strikes a plane mirror at an angle of incidence of 60°, is reflected from the mirror and then strikes a second plane mirror placed so that the angle beftween the mirrors is 45°. The angle of reflection at the second mirror, in degrees, is
A 15
B 25
C 45
D 65
E 75
plz help me guys ASAP!
Answer:
60 - 45 = A. 15
Explanation:
Subtracted because the plane mirror at an angle is incidence of 60°, so then in order to find the value it would be 60-45 and not adding it or dividing and multiplying to find the value thus the answer is 15.
60 - 45 = A. 15. Subtracted because the plane mirror at an angle is incidence of 60°, so then in order to find the value it would be 60-45 and not adding it or dividing and multiplying to find the value thus the answer is 15.
What is Plane mirror?A flat or highly polished surface called a plane mirror reflects light or waves to create an image. It is a polished, smooth surface that creates a virtual representation of the actual object.
A plane mirror is a surface on which an image can only be produced by at least two light beams. The intersection of these two beams can occur inside the mirror or appear to occur somewhere behind the mirror.
The image that follows illustrates how an object appears when viewed via a plane mirror.
Therefore, 60 - 45 = A. 15. Subtracted because the plane mirror at an angle is incidence of 60°, so then in order to find the value it would be 60-45 and not adding it or dividing and multiplying to find the value thus the answer is 15.
To learn more about Plane mirror, refer to the link:
https://brainly.com/question/13101215
#SPJ2
Which option lists a form of potential energy followed by a form of kinetic energy?
A. Sound energy | nuclear energy
B. Magnetic energy electromagnetic energy
C. Gravitational energy | elastic energy
D. Electromagnetic energy | electrical energy
Answer:
Magnetic energy and electromagnetic energy form of potential energy followed by a form of kinetic energy.
(B) is correct option.
Explanation:
Given that,
Lists a form of potential energy followed by a form of kinetic energy
We know that,
Sound energy :
The movement of energy through object it is called sound energy. When a object produced vibration by force then it moves in wave.
Sound wave is example of kinetic energy.
Nuclear energy :
The store energy in the nucleus of the atom it is called nuclear energy. This energy released when occurs fusion and fission.
Nuclear energy is the example of potential energy
Magnetic energy :
Magnetic energy is a type of potential energy which is depend on distance and position in the magnetic field.
Electromagnetic energy :
Electromagnetic energy is light energy. it is type of kinetic energy.
Gravitational energy :
Gravitational energy is a type of potential energy. It is an energy related with gravity or gravitational force.
Elastic energy :
The store energy in elastic object it is called elastic energy. This energy is a type of potential energy.
Electrical energy :
The movement of electrons is called electrical energy. When electrons move through a wire then it is are called electricity. Electrical energy is type of kinetic energy.
Hence, Magnetic energy and electromagnetic energy form of potential energy followed by a form of kinetic energy.
(B) is correct option.
Answer:
its B
Explanation:
A ball is thrown straight up. If the launch velocity is 15 m/s, at what SPEED will the ball return to the thrower’s hand?
a) -15 m/s
b) -9.8 m/s
c) 15 m/s
d) 0 m/s
Answer:
Vf = 15 m/s
Explanation:
First we consider the upward motion of ball to find the height reached by the ball. Using 3rd equation of motion:
2gh = Vf² - Vi²
where,
g = acceleration due to gravity = -9.8 m/s² (negative sign for upward motion)
h = height =?
Vf = Final Velocity = 0 m/s (Since, ball momentarily stops at highest point)
Vi = Initial Velocity = 15 m/s
Therefore,
2(-9.8 m/s²)h = (0 m/s)² - (15 m/s)²
h = (-225 m²/s²)/(-19.6 m/s²)
h = 11.47 m
Now, we consider downward motion:
2gh = Vf² - Vi²
where,
g = acceleration due to gravity = 9.8 m/s²
h = height = 11.47 m
Vf = Final Velocity = ?
Vi = Initial Velocity = 0 m/s
Therefore,
2(9.8 m/s²)(11.47 m) = Vf² - (0 m/s)²
Vf = √(224.812 m²/s²)
Vf = 15 m/s
What does amu represent?
A car accelerates from rest at 7.2 m/s 2 . How much time does it need to attain a speed of 4 m/s? Answer in units of s.
Answer:
The time is 0.6 sec.
Explanation:
Given that,
Acceleration of car = 7.2 m/s²
Speed = 4 m/s
We need to calculate the time
Using equation of motion
[tex]v=u+at[/tex]
Where, u = initial velocity
v = final velocity
a = acceleration
t = time
Put the value in the equation
[tex]4=0+7.2\times t[/tex]
[tex]t=\dfrac{4}{7.2}[/tex]
[tex]t=0.6\ sec[/tex]
Hence, The time is 0.6 sec.
If the acceleration of a motorboat is 4.0 m/s2, and the motorboat starts from rest, what is its velocity after 6.0 s?
Answer:
The velocity of the motorboat after 6s is 24 m/s.
Explanation:
Given;
acceleration of the motorboat, a = 4.0 m/s²
initial velocity of the motorboat, u = 0
time of motion of the motorboat = 6s
Apply the following kinematic equation to determine the velocity of the motorboat after 6 ;
v = u + at
v = 0 + (4 x 6)
v = 24 m/s
Therefore, the velocity of the motorboat after 6s is 24 m/s.
HELP ME PLZ!!!!! I'LL DO ANYTHING!!!!
First find the diameter of each.
Jupiter’s diameter is 86,881 mi.
Earth’s diameter is 7,917.5 mi.
Then divide those two.
Rounded, Jupiter is 11 times larger.
unrounded: 10.9732870224186927691821913482791285127
Finding out how large something is compared to something can be done by dividing.
For example I have two dogs. One dog is 3 feet tall. The other is 2 feet tall. How much taller is dog one? Dog one is 1.5 times larger because 3/2 = 1.5 AND 2 x 1.5 = 3.
So for this case multiplying Earth’s diameter by 10.9732870224186927691821913482791285127 will give you Jupiter’s diameter.
Sal sprints 40 m to the right in 5.5s.
What was his average velocity in m/s?
Answer:
7.27 m/s
Explanation:
You would be dividing 40 (distance) by 5.5 (time) to get the average velocity of 7.27 m/s .
Answer:
7.27
Explanation:
40/5.5=7.27
PLS HELP. A flatbed car of a train moves 8 m/s to the east. A jogger runs along to top the flatbed car (which is not very safe) with a velocity of 6 m/s to the west. How fast is the jogger moving?
Answer:
2 m/s
Explanation: Given that a flatbed car of a train moves 8 m/s to the east. A jogger runs along to top the flatbed car (which is not very safe) with a velocity of 6 m/s to the west.
Since the jogger is moving in an opposite direction to the direction of the train, and velocity is the distance covered in a specific direction, the jogger will be moving at a velocity relative to the velocity of the train.
Velocity = (8 - 6) m/s
Velocity = 2 m/s
Therefore, the jogger will be moving at the speed of 2 m/s
In the lab, you looked at speed-time graphs to determine the acceleration of the cart for each of the three fan
speeds.
What was the acceleration of the cart with Low fan speed?
cm/s2
What was the acceleration of the cart with Medium fan speed? cm/s2
What was the acceleration of the cart with High fan speed?
cm/s2
Answer:
(I). The acceleration of the cart with low fan speed is 18 cm/s²
(II). The acceleration of the cart with medium fan speed is 23.3 cm/s²
(III). The acceleration of the cart with high fan speed is 32 cm/s²
Explanation:
Given that,
You looked at speed-time graphs to determine the acceleration of the cart for each of the three fan speeds in the lab.
According to graph,
A , B and shows the high, medium and low fan speeds respectively.
We know that,
The speed-time graph shows the acceleration.
Acceleration is equal to the rate of change of velocity.
(I). We need to calculate the acceleration of the cart with low fan speed
Using formula of acceleration
[tex]a_{l}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]
Put the value from graph
[tex]a_{l}=\dfrac{125-0}{7}[/tex]
[tex]a_{l}=18\ cm/s^2[/tex]
(II). We need to calculate the acceleration of the cart with medium fan speed
Using formula of acceleration
[tex]a_{m}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]
Put the value from graph
[tex]a_{m}=\dfrac{140-0}{6}[/tex]
[tex]a_{m}=23.3\ cm/s^2[/tex]
(III). We need to calculate the acceleration of the cart with high fan speed
Using formula of acceleration
[tex]a_{h}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]
Put the value from graph
[tex]a_{h}=\dfrac{160-0}{5}[/tex]
[tex]a_{h}=32\ cm/s^2[/tex]
Hence, (I). The acceleration of the cart with low fan speed is 18 cm/s²
(II). The acceleration of the cart with medium fan speed is 23.3 cm/s²
(III). The acceleration of the cart with high fan speed is 32 cm/s²
Answer:
18.0, 24.0, 32.0
Explanation:
just did it
6.P.2.1 Matter: Properties and Changes Notes
The Theory ______
of Conservation
of
states:______
cannot be
or!____________
height
is anything that has
(weight) and height
(takes up space).
A
is the
in an object.
is the
an object takes
to add speaker notes
Answer:
The __law__ conservation
of state that either energy may produced nor destroyed
difference between weightlessness in space and weightlessness in earth
In space we feel weightlessness because the earth's gravity has less effect on us. The Earth's gravitational attraction at those altitudes is only about 11% less than it is at the Earth's surface. If you had a ladder that could reach as high as the shuttle's orbit, your weight would be 11% less at the top.
In 1993, Ileana Salvador of Italy walked 3.0 km in under 12.0 min. Suppose that during 115 m of her walk Salvador is observed to steadily increase her speed from 4.20 m/s to 5.00 m/s. How long does this increase in speed take?
Answer:
t = 25 seconds
Explanation:
Given that,
Distance, d = 115 m
Initial speed, u = 4.2 m/s
Final speed, v = 5 m/s
We need to find the time taken in increasing the speed.
We know that,
Acceleration, [tex]a=\dfrac{v-u}{t}[/tex] ....(1)
The third equation of kinematics is as follows :
[tex]v^2-u^2=2ad\\\\\text{Put the value of a in above equation}\\\\v^2-u^2=2\times \dfrac{v-u}{t}\times d\\\\\because (a^2-b^2)=(a-b)(a+b)\\\\(v-u)(v+u)=\dfrac{2\times (v-u)d}{t}\\\\t=\dfrac{2d}{v+u}\\\\\text{Putting all the values}\\\\t=\dfrac{2\times 115}{4.2+5}\\\\t=25\ s[/tex]
Hence, it will take 25 seconds to increase the speed.
If you want to know your speed going from point A to point B, what
information do you need to know?*
Answer:
the distance between point a and b and the time it takes to get from a to b.
Explanation:
d/t =v
how far will a skateboard travel in 30 seconds if traveling at a speed of 3 m/s
hey can anyone pls help me out in dis !
All of the above.
For example:
A glass plate is a solid. Particles vibrate in a solid and are closely packed. together.
It doesn’t change shape if you touch it.
It doesn’t change volume like it’s water.
Answer:
D: all of the above
Explanation:
particles in a solid do vibrate but they're tightly packed and move around fixed location
Please help on this physics question
Answer:
you need to include the units for both axis to be able to answer this
Explanation:
average speed in uniform motion is the slope anywhere on the line but you could always pick 2 points and do it that way and speed is just rise over run
or y2-y1/x2-x1
Pick two points on the line and determine their coordinates.
Determine the difference in y-coordinates of these two points (rise).
Determine the difference in x-coordinates for these two points (run).
Divide the difference in y-coordinates by the difference in x-coordinates (rise/run or slope).
the second bit i think they are looking for this calculation y = mx + b, where m is the slope and b is the y-intercept (where the line crosses the y axis (the vertical one that has no units
Then use that formula for the last question and put in the x value of 10 and complete the formula to find out what y is
QUESTION: Is there a relationship between height and shoe size? Write a one sentence
summary of your graph.
J
Answer:
There is no particular relationship between the height and shoe size. But the shoe sizes in males is usually bigger than females. And the shoe size tends to get bigger when the person is taller.
Explanation:
The figure shows a horizontal pipe with a circular cross section whose diameter varies. The cross-sectional area at X is 3.0×10−4m2 and at Y is 0.60×10−4m2. Water of density 1000kg/m3 fills the pipe and flows through it at a constant rate of 2.4×10−4m3/s. The difference in pressure between X and Y is most nearly 750 Pa 750 Pa A 1600 Pa 1600 Pa B 7700 Pa 7700 Pa C 8320 Pa 8320 Pa D
By Bernoulli's Principle :
[tex]P_x+\dfrac{\rho v_x^2}{2}+\rho gz_x=P_y+\dfrac{\rho v_y^2}{2}+\rho gz_y[/tex]
Since , pipe is horizontal so every point is at same height .
So , [tex]z_x=z_y[/tex] .
The equation will reduced to :
[tex]P_x+\dfrac{\rho v_x^2}{2}=P_y+\dfrac{\rho v_y^2}{2}[/tex] ..... 1 )
Also flow rate will be constant :
[tex]Q=A_xv_x=A_yv_y[/tex]
[tex]v_x=\dfrac{Q}{A_x}\\\\v_x=\dfrac{2.4\times 10^{-4}}{3\times 10^{-4}}\ m/s\\\\v_x=0.8\ m/s[/tex]
[tex]v_y=\dfrac{Q}{A_y}\\\\v_y=\dfrac{2.4\times 10^{-4}}{0.6\times 10^{-4}}\ m/s\\\\v_x=4\ m/s[/tex]
Now ,
[tex]P_x-P_y=\dfrac{\rho v_y^2}{2}-\dfrac{\rho v_x^2}{2}\\\\P_x-P_y=\rho[\dfrac{ v_y^2}{2}-\dfrac{v_x^2}{2}]\\\\P_x-P_y=1000\times [\dfrac{ 4^2}{2}-\dfrac{0.8^2}{2}]\\\\P_x-P_y=7680\ Pa[/tex]
Difference in pressure between X and Y is most near to 7700 Pa.
Hence, this is the required solution.