Answer:
i would say the neuron
Which of the following is NOT a criteria for a celestial object to be a planet?
-The object has cleared the neighborhood around its orbit of smaller objects.
-The object is in orbit around the Sun.
-The object has a nearly spherical shape.
-The object must be massive enough have a gravitational pull on the sun.
Answer:
The option which is not a criteria for a celestial object to be a planet is;
The object must be massive enough have a gravitational pull on the Sun
Explanation:
There are three criteria for a celestial object to be classified as a planet including;
1) The object's orbit is around the Sun
2) The shape of the object is nearly round due to its mass which is capable of assuming hydrostatic equilibrium
3) Other smaller objects in the neighborhood around the object has been cleared by the object
Therefore, the option which is not a criteria for a celestial object to be a planet is that it must be massive enough to have a gravitational pull on the Sun as every two objects in the Universe share a common gravitational pull according to Newton's Law of Gravitation.
Please what is the work done by a man who is pulling a box of 45kg of mass by means of rope which makes angle of 45 degrees ?
Answer:
No work is done since no distance is given
Explanation:
Since no distance is given, the force is not doing any work
No work is done by the man since we do not know the distance or displacement.
Work is only said to be done when the force applied on an object moves it through a particular distance.
Work done = Force x distance.
Since no distance is given in this problem, we can as well assume that the force applied is doing no work on the object.
Both speed and velocity measure how fast something is moving. However, since speed is not a _ it does not require an _
Answer:
vector
direction
Explanation:
Both speed and velocity measures how fast something is moving. Since speed is not a vector, it does not require direction to describe it.
Speed is the distance divided by the time taken. It is a scalar quantity in that it has only magnitude but no direction.
When describing speed, there is no need to specify its direction.
But when describing velocity, we specify both magnitude and direction.
What type of electrical cord has a ground?
3 pronged cord
2 pronged cord
Explanation:
One prong is known as the hot wire, where the electricity comes in, while the second prong is the neutral wire and electricity leaves. Recall that a circuit must be made for electrons to flow. This means that electrons enters your house through the transmission wires and then the electrons leave along the same lines they entered (just along a different wire).
This set up describes a 2 pronged cord. Adding a third prong allows for a grounding to happen. In the event of an electrical surge, when too many electrons are flowing, disaster is likely to happen without some kind of safety features. The grounding prong allows electrons to seek the ground. You can think of it like a drain in a bathtub when too much water gets in the tub.
Answer:
3 pronged cord
Explanation:
PLEASE HELP NOT A LOT OF TIME LEFT!!!!!
A vector is drawn on an x-y plane. It has a magnitude of 65.1 centimeters and a direction of 28.0 degrees below the positive x-axis. What is the x-component of this vector?
A. 30.6cm
B. 65.1cm
C. 27.1cm
D. 57.5cm
The [x] component will be +57.47 a[x] and the [y] component will be -30.51 a[y].
What are the components of a vector?
Any vector can be resolved along the axes of the cartesian coordinate system. For a two dimensional vector (say [V]), it can be resolved along the
[x] and [y] axis, such that the components of the vector are the vector's themselves and are given by -
[x] component = VcosФ a[x]
[y] component = VsinФ a[y]
Given is a vector is drawn on an X - Y plane. It has a magnitude of 65.1 centimeters and a direction of 28.0 degrees below the positive x-axis.
From the data given, we can write -
Magnitude of vector = |V| = 65.1
Angle made with +x axis = [Ф] =28 degrees {below the axis}
Therefore, the [x] component will be -
[x] = 65.1 x cos(28) = 57.47 a[x]
and the [y] component will be -
[y] = 65.1 x sin(28) = 30.51 × -a[y] = -30.51 a[y]
Therefore, the [x] component will be +57.47 a[x] and the [y] component will be -30.51 a[y].
To solve more questions on vectors, visit the link below-
https://brainly.com/question/14480278
#SPJ1
How will the electrostatic force between two electric charges change if the first charge is doubled and the second charge is only one third of the original charge?
A) 4/9
B) 2/3
C) 6 times
D) 2/9
Answer:
B) [tex]\frac{2}{3}[/tex]
Explanation:
The electric force between charges can be determined by;
F = [tex]\frac{kq_{1} q_{2} }{r^{2} }[/tex]
Where: F is the force, k is the Coulomb's constant, [tex]q_{1}[/tex] is the value of the first charge, [tex]q_{2}[/tex] is the value of the second charge, r is the distance between the centers of the charges.
Let the original charge be represented by q, so that;
[tex]q_{1}[/tex] = 2q
[tex]q_{2}[/tex] = [tex]\frac{q}{3}[/tex]
So that,
F = [tex]q_{1}[/tex][tex]q_{2}[/tex] x [tex]\frac{k}{r^{2} }[/tex]
= 2q x [tex]\frac{q}{3}[/tex] x [tex]\frac{k}{r^{2} }[/tex]
= [tex]\frac{2q^{2} }{3}[/tex] x [tex]\frac{k}{r^{2} }[/tex]
= [tex]\frac{2}{3}[/tex] x [tex]\frac{kq}{r^{2} }[/tex]
F = [tex]\frac{2}{3}[/tex] x [tex]\frac{kq}{r^{2} }[/tex]
The electric force between the given charges would change by [tex]\frac{2}{3}[/tex].
What Kinetic energy is exactly equal to Gravitational Potential Energy why is height halfway between the maximum height?
Explanation:
Let us calculate the work done in lifting an object of mass m through a height h, such as in Figure 1. If the object is lifted straight up at constant speed, then the force needed to lift it is equal to its weight mg. The work done on the mass is then W = Fd = mgh. We define this to be the gravitational potential energy (PEg) put into (or gained by) the object-Earth system. This energy is associated with the state of separation between two objects that attract each other by the gravitational force
Potential energy is a property of a system rather than of a single object—due to its physical position. An object’s gravitational potential is due to its position relative to the surroundings within the Earth-object system. The force applied to the object is an external force, from outside the system. When it does positive work it increases the gravitational potential energy of the system. Because gravitational potential energy depends on relative position, we need a reference level at which to set the potential energy equal to 0. We usually choose this point to be Earth’s surface, but this point is arbitrary; what is important is the difference in gravitational potential energy, because this difference is what relates to the work done. The difference in gravitational potential energy of an object (in the Earth-object system) between two rungs of a ladder will be the same for the first two rungs as for the last two rungs.
Test populations are studied. Population one is found to obey the differential equation dy1/da=o.2y1 and the population two obeys dy2/da = -0.3y2 , where t is the time in years? Which population is growing and which is declining
Answer:
Population 1 indicates growth while Population 2 indicates a declining population
Explanation:
Here, using the given rate of change of the population, we want to determine which of the two is growing and which is declining
From the rate of change of both, we can determine this. Looking at the differential equation for the first one, we can see that it is of positive value. Looking at the differential equation for the second one. we can see it is of negative value
While a positive change rate indicates growth, a negative change rate will indicate otherwise
Hence, we can conclude that the one with a negative rate change will indicate a declining population
Explain why refraction takes place.
Please help explain in a simple way
Answer:
lCdfKFBWRblNLWFNJLBe
Explanation:
jk jk Refraction is an effect that occurs when a light wave, incident at an angle away from the normal, passes a boundary from one medium into another in which there is a change in velocity of the light
Un avión da "una vuelta mortal" de radio R = 500 m con una celeridad constante v = 360 km/h. Halla la fuerza ejercida por el asiento sobre el piloto, si su masa es m = 70 kg, en las partes inferior y superior de la trayectoria circular.
Answer:
1400 N
Explanation:
Verá, durante el salto mortal, el piloto se mueve en una trayectoria circular y la fuerza que actúa sobre él es una fuerza centrípeta.
Sea la fuerza centrípeta F, la masa del piloto (m) = 70 Kg, el radio (r) = 500 my la velocidad (v) = 360 km / hr * 1000/3600 = 100 m / s
F = mv ^ 2 / r
F = 70 * (100) ^ 2/500
F = 1400 N
Which of these statements is FALSE?*
If you find someone's DNA at a crime scene, they are guilty without a doubt
Even identical Twins have different DNA Fingerprints
DNA is individual evidence
When DNA is found, it will not always lead to usable DNA Fingerprint evidence
6th grade science!!!!!!!!!!
Answer:
D. All of the above
Explanation:
Global warming may cause all of the given choices.
Global warming is the rise in surface temperature. This is due to the trapping of heat within the earth surface.
It is as a result of huge amount of greenhouse gases within our atmosphere. They typically permit short wave radiations to escape and they do not allow short wave radiation to pass through. This in turn produces heat.
The heat can melt polar ices and glaciers. This in turn will cause sea levels to rise. Also, the ocean temperature will generally increase due to this.(97-R) Dos cargas puntuales iguales están separadas por una distancia d. A) ¿Es nulo el campo eléctrico total en algún punto? Si es así, ¿cuál es la posición de dicho punto? B) Repita el apartado anterior suponiendo que las cargas fueran de distinto signo.
Answer:
Explanation:
El campo eléctrico provocado por una carga puntal sobre determinado punto viene dado por la ecuación:
E = K * Q /r² en esa ecuación E es el campo eléctrico (un vector), K es una constante K = 1/4*π*ε₀ Q es la carga que origina el campo, y r la distancia entre la carga y el punto donde se quiere determinar el campo. La fuerza de origen eléctrico y el campo eléctrico van en la dirección de la recta de unión entre carga y punto ( es decir según r) y esta fuerza sera repulsiva o de atracción según que la carga que la origina sea positiva o negativa (respectivamente, ya que en la determinación de fuerza y campo, se asume que se coloca una carga de prueba positiva en el punto ).
Siendo así, si dos cargas elécticas son iguales y están separadas una distancia r ; en el punto medio (r/2) los campos producidos por cada una de las cargas serán de la misma magntud.
Carga Q₁ = Carga Q₂ = Q
E₁ = K * Q₁ / (r/2)² y E₂ = K * Q₂/(r/2)²
Y además tendran direcciones totalmente opuestas, por lo que se anularan
En el segundo caso las cargas son iguales en magntud pero de diferentes signos ( una positiva y la otra negativa ). En este caso los campos eléctricos continuaran siendo de la msma magnitud pero dado que la carga positiva repele la carga de muestra (teorica) y la negativa la atrae los dos campos coinciden en su dirección y resultará una campo de magnitud doble. La dirección del campo será en la tendencia de acercarse a la caga negativa, así si la carga negativa está a la derecha la fuerza de origen eléctrico y el campo van hacia la derecha y si la carga negativa está a la izquierda pues esa será la diercción del campo
Can anyone prove ADIABATIC PROCESS ???
Answer:
The adiabatic process can be derived from the first law of thermodynamics relating to the change in internal energy dU to the work dW done by the system and the heat dQ added to it. The word done dW for the change in volume V by dV is given as PdV. Hence, the equation is true for an adiabatic process in an ideal gas.
Explanation:
Hope it helps......bro
Which one of the following is correct? *
A. Average speed and average velocity are the same.
B. There is no difference between uniform motion and uniformly accelerated motion.
C. Acceleration is the rate of change of speed.
D. Uniformly accelerated motion is a motion with constant acceleration.
Answer:
uniform acceleration motion is a motion with constant acceleration.
An electromagnetic wave is composed of electrical and magnetic energy.
Please select the best answer from the choices provided
T
F
Answer:
the answer is T!!
!!!!!!!!
Answer:
true
Explanation:
hope this helps
1. Which of these is not a property of a soun wave? A. Elasticity B. Loudness C. Pitch
Answer:
A
Explanation:
A 445-N force is used to hold up a Papa Johns sign in place. What is the mass of the sign?
Answer:
The mass of the sign is 44.5 kg.
Explanation:
Given that,
Force acting on the sign, F = 445 N
We need to find the mass of the sign.
Net force acting on it is given by :
F = mg
Where g is the acceleration due to gravity
[tex]m=\dfrac{F}{g}\\\\m=\dfrac{445\ N}{10\ m/s^2}\\\\m=44.5\ kg[/tex]
So, the mass of the sign is 44.5 kg.
The radius of a planet is 2400 km, and the acceleration due to gravity at its surface is 3.6 m/s2.
What is the mass of the planet?
Answer:
[tex]3.1\cdot10^{23}\:\mathrm{kg}[/tex]
Explanation:
We can use Newton's Universal Law of Gravitation to solve this problem:
[tex]g_P=G\frac{m}{r^2}[/tex]., where [tex]g_P[/tex] is acceleration due to gravity at the planet's surface, [tex]G[/tex] is gravitational constant [tex]6.67\cdot 10^{-11}[/tex], [tex]m[/tex] is the mass of the planet, and [tex]r[/tex] is the radius of the planet.
Since acceleration due to gravity is given as [tex]m/s^2[/tex], our radius should be meters. Therefore, convert [tex]2400[/tex] kilometers to meters:
[tex]2400\:\mathrm{km}=2,400,000\:\mathrm{m}[/tex].
Now plugging in our values, we get:
[tex]3.6=6.67\cdot10^{-11}\frac{m}{(2,400,000)^2}[/tex],
Solving for [tex]m[/tex]:
[tex]m=\frac{2,400,000^2\cdot3.6}{6.67\cdot 10^{-11}},\\m=\fbox{$3.1\cdot10^{23}\:\mathrm{kg}$}[/tex].
Two resistors are used in an experiment. Resistor 1 had a resistance of 4 ohms and resistor 2 has a resistance of 2 ohms. Which resistor will have the bigger current flowing through it if the potential difference is constant
Answer:
2ohms resistor
Explanation:
According to ohms law
V= IR
V is the potential difference
I is the current
R is the resistance
Since they have the same potential difference, this shows that they are connected in parallel
Let assume V = 20V
For the 4ohms resistor
I = V/R
I = 20/4
I = 5A
For the two ohms resistor
I = V/R
I = 20/2
I = 10A
This shows that the 2ohms resistor will have the bigger current because the smaller the load, the bigger the current and vice versa
Answer:
2
Explanation:
If an object undergoes a change in velocity, then it also undergoes a change in:
Answer:
acceleration
Explanation:
If the velocity is not constant, then there must be a beginning and ending of its velocity. If that is so and there is also a change in time (which there must be) then there is a change in acceleration.
The formula for that is a = (vf - vi)/t
Answer:
probably acceleration
Explanation:
acceleration is the change in velocity
From the poem Black woman what does it mean by Savannah stretching to clear horizons, Savannah shuddering beneath the East wind's eager caresses.
Answer:
From the poem Black woman what does it mean by Savannah stretching to clear horizons, Savannah shuddering beneath the East wind's eager caresses.
Explanation:
A cell of e.m.f 1.5 v and internal resistance 2.5 ohm is connected in series with an ammeter of resistance 0.5 ohm and a resistor of resistance 7.0 ohm. Calculate the current in the circuit.
Answer:
The current in the circuit is 0.15 Ampere
Explanation:
The given parameters of the cell are;
The electromotive force (e.m.f.) of the cell, E = 1.5 V
The resistance of the cell, r = 2.5 ohm
The resistance of the ammeter = 0.5 ohm
The resistance of the resistor = 7.0 ohm
The formula for the e.m.f., E of a cell is given as follows;
e.m.f. E = I·(R + r)
Where;
I = The current in the circuit
R = The sum of the resistances in the circuit = 7.0 Ω + 0.5 Ω + 2.5 Ω = 10 Ω
Therefore, we have;
[tex]The \ current \ in \ the \ circuit, \ I = \dfrac{E}{R + r}[/tex]
Substituting the known values, gives;
[tex]I = \dfrac{1.5 \ V}{7 \ \Omega + 0.5 \ \Omega + 2.5 \ \Omega} = \dfrac{1.5 \ V}{10 \ \Omega} = 0.15 \ A[/tex]
The current in the circuit, I = 0.15 Ampere.
What is the same about a particle as gas, liquid, or solid?
A. The speed at which the particles move.
B. The volume that the substance takes up.
C. The chemical composition.
D. The temperature of the substance.
The thing same about a particle as gas, liquid, or solid is its chemical composition.
What are states of matter?
Matter exists in three different states: solid, liquid, and gas. By examining the configuration of their particles, it is possible to understand why they have various qualities. Theoretically, at this temperature, particles move slowly and have the least amount of energy.
Phase refers to the material's actual state. To pay attention to is the word physical. Only physical means can change the state of matter. You can make a physical change if energy is added (by raising the temperature) or subtracted (by freezing things).
The chemical composition of matter same about a particle as gas, liquid or solid.
To learn more about states of matter refer to the link:
brainly.com/question/9402776
#SPJ5
•1. Identify the four inner/terrestrial planets.
Answer:
1) Mercury
2) Venus
3) Earth
4) Mars
Explanation:
Answer:
The for inner/terrestrial planets are Mercury, Venus, Earth and Mars
Explanation:
~Notify me if you have questions~
Have a nice day and I hope it helps!
^ω^
-- XxFTSxX
Match each term with the appropriate definition.
mass
the amount of matter in an object
balance
the downward pull on an object due to
gravity.
weight
a tool used to measure weight
scale
a tool used to measure mass
Answer:
mass- the amount of matter in an object
balance- tool used to measure mass
scale- a tool used to measure weight
weight- the downward pull on an object due to gravity
When one end of a metal bar is heated, the opposite end will eventually become hot. Which of the following processes transfers the heat through the bar?
Group of answer choices
condensation
radiation
convection
conduction
Someone pls help me with this!
Answer:
F=8.87 N
Explanation:
Coulomb's Law
The electrostatic force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.
Written as a formula:
[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]
Where:
[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]
q1, q2 = the objects' charge in coulomb
d= The distance between the objects in meters
Object 1 has a charge of
[tex]q_1=-2.3\cdot 10^{-6}\ c[/tex]
Object 2 has a charge of
[tex]q_2=-4.2\cdot 10^{-6}\ c[/tex]
They are separated by a distance of
d = 0.099 m
Calculate the force:
[tex]\displaystyle F=9\cdot 10^9\frac{2.3\cdot 10^{-6}*4.2\cdot 10^{-6}}{0.099^2}[/tex]
F=8.87 N
If Bert the Bat travels East at 200 meters in 10 seconds, what is his velocity?
Answer:
20m/s due east
Explanation:
Given parameters:
Displacement eastward = 200m
Time = 10s
Unknown:
Velocity = ?
Solution:
Velocity is the displacement divided by time;
Velocity = [tex]\frac{displacement}{time}[/tex]
Velocity = [tex]\frac{200}{10}[/tex] = 20m/s due east
A guitar string is plucked. What best describes the formation and transmission of the sound wave?
The string vibrates the surrounding air, which produces a transverse wave.
The string vibrates the surrounding air, which produces a longitudinal wave.
The string produces a longitudinal wave that travels without a medium.
The string produces a transverse wave that travels without a medium.
The string vibrates the surrounding air, which produces a longitudinal wave.
Brainly if correct? Please and thank you :D
The guitar string vibrates the surrounding air, which produces a transverse wave.
What are transverse waves and longitudinal waves?Longitudinal waves:In a longitudinal wave, the medium or channel moves parallel to the wave in the same direction. Here, the particles are moving from left to right, which causes other particles to vibrate.Examples: sound waves in the air; vibration in a spring.Transverse wavesThe medium or channel flows perpendicular to the wave's direction in a transverse wave. Here, the waves flow horizontally while the particles oscillate up and down.Examples: electromagnetic waves; waves in a string.Why does plucking a guitar string produces transverse waves?
A transverse wave can be used to represent the motion of a guitar string since it oscillates up and down perpendicular to its axis of motion.
Learn more about waves produced due to plucking a string of guitar here:
https://brainly.com/question/15853432?referrer=searchResults
#SPJ2