Instructions
Click the links to open the resources below. These resources will help you complete the assignment. Once you have created your
file(s) and are ready to upload your assignment, click the Add Files button below and select each file from your desktop or network
folder. Upload each file separately.
Answers
1. This experiment was to find how mass and speed effect KE. This is important because if you were in a situation where you needed something to go higher, you would know to add more or less of mass/speed.
To test mass, we filled the bean bag with a certain amount of water, then dropped it. After, you recorded how high it made the bean bag go. The same with speed, but same amount in the bottle, just dropped from different heights.
My hypothesis is when you have more mass, the KE will be greater. This is also the same with speed, if it is dropped from a higher place, the bean bag will launch farther than the last time.
2. Data I collected from the lab was like my hypothesis explained. When the height of the bottle increased, it made the bean bag go higher than the last. And I tested 4 different masses, 0.125 kg, 0.250kg, 0.375kg and 0.500kg. Each time the bean bag went higher on a larger mass.
A lot of times on the speed test, the bean bag would go higher than the bottle drop point, but not every time. Also, when it was dropped from the same height each time, some results varied quite a bit, like when it was dropped from 1.28 the results were 1.14 then 1.30 1.30. Mass on the other hand was all in the same number range, only once the numbers were a bit off from each other.
3. Some formulas I used were KE= ½ mv^2 and Ht v^2/2g. The first was to calculate the kinetic energy of an object, m=mass v=speed. Second was for finding out what height I needed to drop something to reach a certain speed, Ht=Height and g= Gravitational Acceleration of 9.8 m/s^2.
I used these to figure out tables that showed relationships between different things like mass and KE or speed and height. The whole time I was doing the lab, my data was going up, when there was more mass/speed there were higher values in the table.
This means that my hypothesis at the beginning was correct, more of m/s means KE will increase proportionally because they are all linear. I found it surprising when the bean bag height went over the water bottle drop mark.
4. To conclude, my hypothesis matched my data. The data values went up when more mass or speed was added. This means if I were in a situation where I needed more kinetic energy for something, I would know to increase mass or the speed of the object giving it energy.
The reason that this hypothesis is correct is when you have more mass, you have more energy. So, when you drop let's say a baseball, it isn’t that heavy so it would only launch the bean bag so far. But a bowling ball is very heavy and has lots of energy when falling because of that, it would make the bean bag go very high.
To make this experiment better, I would use a smoother material for the lever so energy wouldn’t be lost by friction from wood rubbing together. Also, maybe a scanner or video camera to more accurately record how far the bean bag went. All of these would help the lab get more precise results, maybe they could be used in a future lab.
Explanation:
Answer:
ima give my whole doc if anyone need it in future like i did Edge 2023
Explanation:
Related Questions
As part of a soil analysis on a plot of land, a scientist wants to determine the ammonium content using gravimetric analysis with sodium tetraphenylborate, Na+B(C6H5)−4. Unfortunately, the amount of potassium, which also precipitates with sodium tetraphenylborate, is non‑negligible and must be accounted for in the analysis. Assume that all potassium in the soil is present as K2CO3 and all ammonium is present as NH4Cl.
A 5.025 g soil sample was dissolved to give 0.500 L of solution. A 100.0 mL aliquot was acidified and excess sodium tetraphenylborate was added to precipitate both K+ K + and NH+4 ions completely.
Compound Formula mass
B(C6H5)−4+K+⟶KB(C6H5)4(s) KB(C6H5)4 358.33 g/mol
B(C6H5)−4+NH+4⟶NH4B(C6H5)4(s) NH4B(C6H5)4 337.27 g/mol
K2CO3 138.21 g/mol
NH4Cl 53.492 g/mol
The resulting precipitate amounted to 0.277 g. A new 200.0 mL aliquot of the original solution was made alkaline and heated to remove all of the NH+4 as NH3. The resulting solution was then acidified, and excess sodium tetraphenylborate was added to give 0.105 g of precipitate.
Find the mass percentages of NH4Cl and K2CO3 in the original solid.
______ %NH4CL
______ %K2CO3
Answers
Answer:
Mass percentage of NH₄Cl = 3.54%
Mass percentage of K₂CO₃ = 1.01%
Explanation:
If a 200.0 mL aliquot produced 0.105 g of KB(C₆H₅)₄, then a 100.0 mL aliquot would produce 1/2 * 0.105 g = 0.0525 g of KB(C₆H₅)₄.
Therefore, mass of NH₄B(C₆H₅)₄ in the 100.0 ml aliquot = (0.277 - 0.0525)g = 0.2245 g
Number of moles of NH₄B(C₆H₅)₄ in 0.2245 g = 0.2245 g/ 337.27 g/mol = 0.0006656 moles
In 500 ml solution, number of moles present = 0.0006656 * 500/100 = 0.003328 moles.
From equation of the reaction; mole ratio of NH₄⁺ and NH₄B(C₆H₅)₄ = 1:1
Similarly, mole ratio of NH₄⁺ and NH₄Cl = 1:1
Therefore, moles of NH₄Cl in 500 ml sample = 0.003328 moles
Mass of NH₄Cl = 0.003328 mol * 53.492 g/mol = 0.178 g
Mass percentage of NH₄Cl = (0.178/5.025) * 100% = 3.54%
Number of moles of KB(C₆H₅)₄ in 0.105 g (precipitated from 200.0 ml aliquot) = 0.105 g/ 358.33 g/mol = 0.000293 moles
In 500 ml solution, number of moles present = 0.000293 * 500/200 = 0.0007326 moles.
From equation of the reaction; mole ratio of K⁺ and KB(C₆H₅)₄ = 1:1
Similarly, mole ratio of K⁺ and K₂CO₃ = 2:1
Therefore, moles of K₂CO₃ in 500 ml sample = 0.0007326/2 moles = 0.0003663 moles
Mass of K₂CO₃ = 0.0003663 mol * 138.21 g/mol = 0.05063 g
Mass percentage of K₂CO₃ = (0.05063/5.025) * 100% = 1.01%
Which of the elements listed below would
require the least amount of energy to remove an
electron?
Beryllium
Calcium
Lithium
Sodium?
Answers
Answer:
Lithium would require the least amount of energy to remove an electron
Answer:
The answer is actually sodium
Explanation:
Lithium actually requires more than sodium.
QUESTION 1
Consider the following reaction: CH4 + 202 --> 2H2O + CO2
How many moles of water can be formed from 1.1 moles of CH4?
Answers
Explanation: This one is a lot easier than it seems! All you have to do is multiply 1.1 by the mole ratio(look at the coefficients)
What is the velocity of a wave?
A. How much energy the wave has
B. How quickly the wave travels
C. The distance between two wave peaks
D. The distance between the high and low points of the wave
Answers
Solid sodium is reacted with chlorine gas and a crystalline solid was formed. The crystalline solid is evidence that
A. The sodium was broken down into tiny pieces by the chlorine.
B. The reaction caused impurities to fall out.
C. Elements bond in a multitude of ways to make compounds.
D. The chlorine solidified.
Answers
Answer:
C. Elements bond in a multitude of ways to make compounds.
Explain how scientists know the composition of the bottom layer of the cust?
Answers
HOPED IT HELPED IF IT DID CAN I HAVE BRAINLIEST AND GOOD LUCK.
2. Using the following data, calculate the average atomic mass of magnesium (give your answer to the nearest
.01 ) : Show all work!
Isotope: Mg Percent abundance: 78.70%
24
Isotope: 'Mg Percent abundance: 10.13% 25
Isotope: Mg Percent abundance: 11.17% 26
Answers
Answer: 24.309amu
Explanation:
calulate the molarity
The first solution contains 0.600 mol of NaOH in 2.10 L of solution.
The second solution contains 10.3 g of NaCl in 675 mL of solution.
Answers
2) 0.261 M NaCl
Hope this helps :)
How many elements are shown in the diagram below for Hydrogen Peroxide?
Ten
Seven
Four
Two
Answers
Answer:4
Explanation:
4
PLEASE HELP ASAP‼️ Which of the following elements has the highest metallic character
A. Zt
B. Rh
C. Hf
D. Co
Answers
Answer: C
Explanation:
A sample of a metal has a mass of 23.4 g and a volume of 3.0 mL. What is the sample’s most likely identity?
A. Aluminum (2.8 g/mL)
B. Iron (7.8 g/mL)
C. Copper (8.9 g/mL)
D. Gold (19.3 g/mL)
Answers
Answer:
B. Iron (7.8 g/mL)
Explanation:
23.4/3 = 7.8
7.8g/mL
The identity of a sample of a metal that has a mass of 23.4 g and a volume of 3.0 mL is iron with a density of 7.8g/mL.
How to calculate density?The density of a substance can be calculated by dividing the mass of the substance by its volume. That is;
Density = mass (g) ÷ volume (mL)
According to this question, a sample of a metal has a mass of 23.4 g and a volume of 3.0 mL. The density of the metal is as follows:
Density = 23.4g ÷ 3mL
Density = 7.8g/mL
Therefore, the identity of a sample of a metal that has a mass of 23.4 g and a volume of 3.0 mL is iron with a density of 7.8g/mL.
Learn more about density at: https://brainly.com/question/21667661
Complete each statement by choosing the correct answer from the drop-down menu.
are the types of muscle tissue found in the human body.
Muscle cells are specialized to
are the two specialized proteins found in muscle.Muscle Tissue
Answers
Answer:
smooth, skeletal, cardiac
contract
actin and myosin
Explanation:
edge
Answer:
The correct answers are
smooth, skeletal, cardiac
contract
actin and myosin
a typical baseball has a mass of 350g and takes up a volume of .780L. what is the density of a baseball in g/l and g/ml?
Answers
Answer:
449 g/L
0.449 g/mL
Explanation:
Step 1: Given data
Mass of a typical baseball (m): 350 gVolume of a typical baseball (V): 0.780 LStep 2: Calculate the density (ρ) of the baseball in g/L
The density is equal to the quotient between the mass and the volume.
ρ = m / V
ρ = 350 g / 0.780 L
ρ =449 g/L
Step 3: Convert ρ from "g/L" to "g/mL"
We will use the conversion factor 1 L = 1000 mL.
449 g/L × (1 L/1000 mL) = 0.449 g/mL
what is the chemical formula for the magnesium ion and the carbonate ion?
Answers
Answer: The formula for magnesium carbonate is MgCO_3.
Explanation:
WILL mark Brainliest
Answers
Answer:
Ok what question
Explanation:
If the titration of 0.8094 g of 100% pure
KHP requires 40.25 mL of NaOH, what
is the concentration of the NaOH
solution? Remember KHP is potassium
hydrogen phthalate, KHC2H4O4. Show
this calculation in your lab notebook.
Answers
Answer:
Explanation:
molecular weight of potassium hydrogen phthalate = 204
.8094 g of KHP = .8094 / 204 = 3.967 x 10⁻³ moles
3.967 x 10⁻³ moles of KHP must have reacted with 3.967 x 10⁻³ moles of NaOH
concentration of NaOH = 3.967 x 10⁻³ / 40.25 x 10⁻³
= .098 M .
Determine the mass defect for the following atom. The mass of a 20 Ne atom is 19.992 44 amu.
Answers
Answer:
I will not consider electronic mass here. We know (the masses should have been provided in the question!) that the neutron mass is
1.008701
⋅
amu
and the proton mass is
1.007316
⋅
amu
.
Explanation:
Question answered
Which of the following compounds is the MOST polar?
H−Br
H−F
H−Cl
H−I
Answers
Match the descriptions below with the graphs. Be sure to explain your answers.
Answers
How many moles are in 2.16 x 1026 atoms of magnesium?*
Answers
Answer:
The answer is 358.80 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{2.16 \times {10}^{26} }{6.02 \times {10}^{23} } \\ = 358.80398671...[/tex]
We have the final answer as
358.80 molesHope this helps you
5. Explain why the particle diagram below represents a chemical change.
plsss help!!!
Answers
Answer:
the atoms are rearranged
Explanation:
they are just in a diff order
The particle diagram represents a chemical change because the breaking of old chemical bonds and the formation of new chemical bonds occurs and a completely new substance is formed.
What is the chemical change?A chemical change is when a chemical substance is completely transformed into one or more different types of substances. Chemical changes occur through chemical reactions and result in substances with different and new chemical and physical properties.
Chemical changes are irreversible in nature and are also known as permanent changes. When chemical responses occur, the molecules are modified and joined by an energy change as new molecules are produced.
Examples of chemical changes: burning of coal, rusting of iron, digestion of food, adding vinegar to baking soda, germination of seeds, ripening of fruits, cooking an egg, etc.
The given diagram is quite similar to the water formation reaction:
2H₂ + O₂ [tex]\longrightarrow[/tex] 2H₂ O
In which the bond between the hydrogen atoms and oxygen atoms is broken and the formation of the O-H bond, therefore, is a chemical change.
Learn more about chemical change, here:
brainly.com/question/23693316
#SPJ2
PLS HELP ITS URGENT
Some plant cells need energy to carry nutrients across the cell membrane. Which type of energy transformation does these plant cells use to bring the nutrient molecule inside the cell membrane?
thermal energy to kinetic energy
potential energy to light energy
chemical energy to kinetic energy
kinetic energy to potential energy
Answers
Answer:
Answer
The answer is option 4
The energy transformation during nutrients transportation across the cell membrane is transformation from chemical energy to kinetic energy, where the uphill and downhill movements of molecules based on concentration gradient carries the whole process.
What is energy transformation?The total energy in a system is always conserved. However, one form of energy can be transformed into another form. For example we uses electrical devices such as bulbs fan etc, wherever the energy transformation is getting way from electrical energy to light or mechanical energy.
In plant cells nutrient molecules and ions are balanced inside and outside the cell and hence they are transported across the cell membrane by a concentration gradient with a chemical energy produced by the molecules.
The chemical energy inside of the ions and molecules converts to kinetic energy to transport itself through downhill and uphill mechanisms with aid of various enzymes and electron channels.
To find more on energy transformation, refer here:
https://brainly.com/question/29102331
#SPJ6
Help PlS AFAP and thank you so much
Answers
the answer is B transfer thru direct contact
"During a chemical reaction, you must have the same amount of substance
on both sides of the quation" This statement is the definition for the *
Answers
Answer:
This statement is the definition of law of conservation of mass.
Explanation:
Law of conservation of mass:
According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
For example:
In given photosynthesis reaction:
6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂
there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.
Let us consider the general chemical reaction.
A + B → C
5g + 5g 10g
The circular flow model interacts between which sectors of the economy? Select THREE answers.
Private
Government
Foreign
Tech
Households
Answers
Answer:
2,3,5
Explanation:
Distinguishing solutions and colloids
Which techniques would be best for separating the solute from the solvent in a solution ?
Answers
Answer:
Distillation will be the best method for the separation of solute from the solvent in a solution.
Explanation:
why is water a neutral substance
Answers
Answer: Water is considered neutral because the concentration of hydrogen and hydroxide ions is the same
Explanation:
What is the frequency of a photon of light (in Hz) that has an energy of 2.50 x 10-18 J?
Answers
Answer:
The answer is
[tex]3.77 \times {10}^{15} \: \: \: Hz[/tex]
Explanation:
The frequency of the photon can be found by using the formula
[tex]f = \frac{E}{h} \\ [/tex]
where
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question
E = 2.50 × 10^-18 J
So we have
[tex]f = \frac{2.50 \times {10}^{ - 18} }{6.626 \times {10}^{ - 34} } \\ [/tex]
We have the final answer as
[tex]3.77 \times {10}^{15} \: \: \: Hz[/tex]
Hope this helps you
Tobacco use: The _____ _______ cause of ______ death
Answers
Answer:
Tobacco use: The most preventable cause of cancer death
Explanation:
cancer might not be right
How would a descriptive model of Earth's layers be categorized?
a. abstract model
b. prototype model
c. concrete model
d. conceptual model
Answers
A descriptive model of Earth's layers can be categorized as prototype model. Hence, option B is correct.
What is a descriptive model?
A descriptive model describes a system or other entity and its relationship to its environment.
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.
The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle.
Hence, option B is correct.
Learn more about descriptive model here:
https://brainly.com/question/16988456
#SPJ2