In the figure below, a block of 1.67 slides on a track with different levels, which has friction only at the highest point where the kinetic coefficient of friction is uk = 0.35. If the block has an initial speed V0 = 7.5m/s and the highest point of the track is at ℎ = 2.1 above the initial position of the block, calculate the distance where the friction force for the block is.

Answer:

Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?

Answer:

The Third law

Explanation:

For every action there is an equal and opposite reaction.

Answer:

First Law

Explanation:

An object at rest (not moving) will stay at rest unless an unbalanced force acts on it.

An object in motion will stay in motion (in a straight line and at a constant speed) unless an unbalanced force acts on it.

You jump down on a trampoline and fly up in the air as a result.

Answer:

false

Explanation:

Answer:

when the electron transferred permanently to another atom

Answer:

102 m

Explanation:

Given that It takes a minimum distance of 48.96 m to stop a car moving at 12.0 m/s by applying the brakes (without locking the wheels). Assume that the same frictional forces apply and find the minimum stopping distance when the car is moving at 25.0 m/s.

Let the stopping distance be equal to S.

According to the definition of speed,

Speed = distance / time.

make time the subject of the formula

Time = distance / speed

then, the equivalent time is:

48.96 / 12 = S / 25

Cross multiply

12S = 48.96 x 25

12S = 1224

S = 1224 / 12

S = 102 m

Therefore, the stopping distance is 102 m

Answer:

Just to help, periods on the periodic table are those running horizontally from left to right

Answer:

The answer is A.Boron and carbon are likely together in one period because they have very close atomic numbers, while gallium and germanium are likely together in another period because they have very close atomic numbers.

Explanation:

just took test

Answer:

A group of protons and neutrons that are surrounded by electrons  I think that's the answer...

Explanation:

Answer:

its true trust me

Explanation:

Answer: true

Explanation: edge

Answer:

Package 1 will land at 228.0 m, package 2 will land at 308.0 m, and the distance between them is 80.0 m.

Explanation:

To find the distance at which the first package will land we need to calculate the time:

[tex] Y_{f} = Y_{0} + V_{0y}t - \frac{1}{2}gt^{2} [/tex]

Where:

Y(f) is the final position = 0

Y(0) is the initial position = 160 m

V(0y) is initial speed in "y" direction = 0

g is the gravity = 9.81 m/s²

t is the time=?                                          

[tex] 0 = 160 m + 0t - \frac{1}{2}9.81 m/s^{2}t^{2} [/tex]

[tex] t = \sqrt{\frac{2*160 m}{9.81 m/s^{2}}} = 5.7 s [/tex]

Now we can find the distance of the first package:

[tex] X_{1} = V_{0x}*t = 40.0 m/s*5.7 s = 228.0 m [/tex]

Then, after 2 seconds the distance traveled by plane is (from the initial position):

[tex] X_{p} = V_{0x}*t = 40.0 m/s*2 s = 80.0 m [/tex]

Now, the distance of the second package is:

[tex] X _{2} = X_{1} + X_{p} = 228.0 m + 80.0 m = 308.0 m [/tex]

The distance between the packages is:

[tex] X = X_{2} - X_{1} = 308.0 - 228.0 m = 80.0 m [/tex]

Therefore, package 1 will land at 228.0 m, package 2 will land at 308.0 m and the distance between them is 80.0 m.

I hope it helps you!

Answer:

The boat has more buoyancy

Explanation:

Answer:

The voltage is   [tex]V =   0.993V_b[/tex]

Explanation:

From the question we are told that

   The time that has passed is  [tex]t = \frac{\tau}{2}[/tex]

 Here [tex]\tau[/tex] is know as the time constant

    The voltage of the  power source is   [tex]V_b[/tex]

Generally the voltage equation for charging a capacitor is mathematically represented as

       [tex]V =  V_b  [1 - e^{- \frac{t}{\tau} }][/tex]

=>   [tex]V =  V_b  [1 - e^{- \frac{\frac{\tau}{2}}{\tau} }][/tex]

=>   [tex]V =  V_b  [1 - e^{- \frac{\tau}{2\tau} }][/tex]

=>   [tex]V =  V_b  [1 - e^{- \frac{1}{2} }][/tex]

=>   [tex]V =   0.993V_b[/tex]    

Explanation:

The question is incomplete. Here is the complete question.

A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of  30m/s. The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to...

Given

initial velocity of rocket u = 0m/s

final velocity of rocket = 30m/s

Height reached by the rocket = 98m

Required

upward acceleration of the rocket

Using the equation of motion below to get the acceleration a:

[tex]v^2 = u^2+2as\\30^2 = 0^2 + 2(a)(98)\\900 = 196a\\a = \frac{900}{196}\\a = 4.59m/s^2[/tex]

Hence  upward acceleration of the rocket during the burn phase is closest to 5m/s²

Note that the velocity used in calculation was assumed.

Answer:

A) By applying a known force, and measuring it's acceleration.

Explanation:

This is actually something that astronauts do in space as a mathmatical exercise when calculating the mass of an object since F = m × a.

Once the force, and acceleration are applied, the only unknown is the mass which can be solved by dividing force over acceleration. This is because inertial mass is equal to gravitational mass.

Answer:

K and I

Explanation:

Contour maps use lines that represent spaces in a map that have the same elevation, this means that all the lines should be continuous and closed, in this case, we are not able to see the full extent of most of the lines, but since the points are located in different lines we can assume that they are at different heights, so since only point K and point I are on the same line, we know that these two points are at the same height.

Answer: C.

Explanation:

For a parallel-plate capacitor where the distance between the plates is d.

The capacitance is:

C = e*A/d

You can see that the distance is in the denominator, then if we double the distance, the capacitance halves.

Now, the stored energy can be written as:

E = (1/2)*Q^2/C

Now you can see that in this case, the capacitance is in the denominator, then we can rewrite this as:

E = (1/2)*Q^2*d/(e*A)

e is a constant, A is the area of the plates, that is also constant, and Q is the charge, that can not change because the capacitor is disconnected.

Then we can define:

K = (1/2)*Q^2/(e*A)

And now we can write the energy as:

E = K*d

Then the energy is proportional to the distance between the plates, this means that if we double the distance, we also double the energy.

If the plates are pulled apart to twice their original separation, then this will double the stored energy. Hence, option (C) is correct.

The given problem is based on the concept of parallel plat capacitor. For a parallel-plate capacitor where the distance between the plates is d.

The capacitance is:

C = e*A/d

here.

e is the permittivity of free space.

Since, the distance is inversely proportional then if we double the distance, the capacitance halves.  Now, the stored energy can be given as,

E = (1/2)*Q^2/C

here,

Q is the charge stored in the capacitor.

Now you can see that in this case, the capacitance is in the denominator, then we can rewrite this as:

E = (1/2)*Q^2*d/(e*A)

e is a constant, A is the area of the plates, that is also constant, and Q is the charge, that can not change because the capacitor is disconnected.

Then we can define:

K = (1/2)*Q^2/(e*A)

And now we can write the energy as:

E = K*d

So, the energy is proportional to the distance between the plates.

Thus, we can conclude that if the plates are pulled apart to twice their original separation, then this will double the stored energy. Hence, option (C) is correct.

Learn more about the energy stored in a capacitor here:

https://brainly.com/question/3611251

Answer:

Explanation:

The needle is showing north south direction . when current starts flowing in the wire which is held vertical to the ground , it deflects towards east .

a )

Therefore a magnetic field towards east has been created . It is possible only if current flows towards the surface in the vertical wire .

b )

magnetic field created at the magnetic needle B = 10⁻⁷ x  2I / d where I is current and d is distance .

B = 10⁻⁷ x  2 x 26.3  / .27

= 194.81 x 10⁻⁷ T

angle of deflection of solenoid = 22.9°

Tan 22.9 = B /H

.422 = 194.81 x 10⁻⁷ / H

H = 461.63 x 10⁻⁷ T

= .46 x 10⁻⁴ T .

A) The current in the wire flows towards the Earth's surface

B) The magnitude of the horizontal component of the Earth's magnetic field is :   0.46 x 10⁻⁴ T

A) The compass needle held horizontally points in a North-south direction of the earth and also deflects eastwards when current is allowed to flow through it. The deflection of the needle indicates the presence/generation of a magnetic field on the earth surface. which is facilitated by the flow of the current in the wire towards the Earth's surface

B) Determine The magnitude of the horizontal component of the Earth's magnetic field

B ( magnetic field ) = 10⁻⁷ * 2I / d ---- ( 1 )

where : l = 26.3 A,   d = 0.27 m

Back to equation ( 1 )

B = 10⁻⁷ * 2 * 26.3 / 0.27

  = 194.81 * 10⁻⁷ T

Final step : Calculate the magnitude of horizontal component  ( H )

Tan ∅ = B / H ---- ( 2 )

where : ∅ ( angle of deflection ) = 22.9°

∴ H = B / Tan ( 22.9° )

      = (  194.81 * 10⁻⁷ ) / 0.422

      = 0.46 x 10⁻⁴ T

Hence we can conclude that The current in the wire flows towards the Earth's surface and  The magnitude of the horizontal component of the Earth's magnetic field is :   0.46 x 10⁻⁴ T

Learn more about Earth magnetic field : https://brainly.com/question/115445

Answer:

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) E=0

Explanation:

Let's analyze the situation when a negative charge is placed inside the cavity, it repels the other negative charges, leaving the necessary positive charges to compensate for the -Q charge. The electrons that migrated to the outer part of the sphere, as it is connected to the ground, can pass to the earth and remain on the planet; therefore on the outside of the sphere the net charge remains zero.

With this analysis we can answer the specific questions

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) If we create a Gaussian surface on the outside of the sphere the net charge on the inside of this sphere is zero, therefore there is no electric field, on the outside

d) If it is very reasonable and this system configuration is called a Faraday Cage

e) We cannot apply this principle to gravity since there are no particles that repel, in all cases the attractive forces.

[tex]a = \frac{vf - vi}{t} [/tex]

here initial velocity vi=0 as ball release from rest

the final velocity is vf=4.0

time is t=6

so putting all these values in above equation

[tex]a = \frac{ 4.0- 0}{6} [/tex]

[tex]a = 0.6667m \s {}^{2} [/tex]

Analysing the question:

Since the stone was dropped, there was no initial velocity applied on it and hence it's initial velocity of the stone is 0 m/s

We are given:

height of the tower (h) = 66 m

mass of the stone (m) = 0.5 kg

initial velocity of the stone (u) = 0 m/s

time taken by the stone to reach the ground (t) = t seconds

acceleration due to gravity = 10 m/s²

** Neglecting air resistance**

Finding the time taken by the stone to reach the ground:

from the second equation of motion

h = ut + 1/2at²

replacing the variables

66 = (0)(t) + 1/2 (10)(t)²

66 = 5t²

t² = 13.2

t = 3.6 seconds

I initially wanted to subtract the height of the student from the height of the tower since the time i calculated is the time taken by the stone to reach the ground and that means that the stone has already hit the student before 3.6 seconds

but since we were NOT given the height of a student, the person who posed this question wants the time taken by the stone to reach the ground and that is what we solved

Answer:

1800 m/s

Explanation:

The equation is v = fλ

λ= 0.75

f = 2400 Hz

V = 2400 × 0.75

V = 1800 m/s

[ you did not give units for wavelength, I assumed it would be m/s]

Analyzing the question:                                                                                        

We are given:

initial velocity (u) = 100 m/s

final velocity (v) = v m/s

distance (s) = 125 m

acceleration (a) = 5 m/s²

Solving for Final Velocity (v):                                                                              

from the third equation of motion:

v² - u² = 2as

v² - (100)² = 2(5)(125)

v² - 10000 = 1250

v² = 1250 + 10000

v² = 11250

v = 106.06 m/s

Answer:

The capacitance of the capacitor is 31.84 μF.

Explanation:

Given;

power rating of the bulb, P = 100 W

voltage rating of the bulb, Vr = 100 V

operating voltage of the bulb, V= 141.4 V

frequency of the AC = 50 Hz

P = IV = 100 W

V = 100 V

I =

Ic = 1 A

The voltage across the capacitor is given by;

[tex]V_c = \sqrt{V^2 - V_R^2} \\\\V_c = \sqrt{141.4^2 - 100^2} \\\\V_c =99.97 \ V[/tex]

[tex]V_c = I_cX_c\\\\V_c = I_C* \frac{1}{2\pi fC}\\\\ 99.97 = 1 * \frac{1}{2\pi *50 *C}\\\\ C=\frac{1}{2\pi *50*99.97}\\\\ C = 31.84*10^{-6} \ F\\\\C = 31.84 \ \mu F[/tex]

Therefore, the capacitance of the capacitor is 31.84 μF.

Answer:

III) [tex]d_{1}+ d_{2}=d_{t}[/tex]

Explanation:

I) coordinate (0,5) is the head for [tex]d_{1}[/tex] I will put the tail coordinate as (0,0) but it could be any other number in the x just not in the 5  with the the y being any other value.

II) coordinate (5,5) is the head for [tex]d_{2}[/tex] the tail needs to be in the head of [tex]d_{1}[/tex] being (0,5)

III) coordinates for [tex]d_{t}[/tex] is connecting the tail from [tex]d_{1}[/tex] and the head of [tex]d_{2}[/tex] making it (0,0)[tex](tail)[/tex] and (0,5)[tex](head)[/tex] and is written as [tex]d_{1}+ d_{2}=d_{t}[/tex]

(i) using coordinate grid notation to represent d₁, d₁ = 5y

(ii) using coordinate grid notation  to represent d₂, d₂ = 5x + 5y

(ii) The sum of d₁ and d₂ is written as 5x + 10y

In order to show the horizontal direction of a vector, we will place x after the magnitude of the vector.

Also, to show the vertical direction of a vector, we will place a y after the magnitude of the vector.

(i) Using coordinate grid to represent d₁ = (0, 5)

[tex]d_1 = 0(x) + 5(y)\\\\d_1 = 5y[/tex]

(ii) Using coordinate grid to represent d₂ = (5, 5)

[tex]d_2 = 5x + 5y[/tex]

(iii) The total vector is written as;

[tex]d_1 + d_2 = 5y + (5x + 5y)\\\\d_1 + d_2 = 5y + 5x + 5y\\\\d_1 + d_2 = 5x + 10y[/tex]

Learn more here: https://brainly.com/question/17212749

Answer:

lithium

Explanation:

I took physical science 2 years ago and passed with an A

Answer:

In a nutshell, units of A and B are [tex]\frac{1}{[l]^{2}}[/tex] and [tex]\frac{[l]}{[t]}[/tex], respectively.

Explanation:

From Dimensional Analysis we understand that [tex]x[/tex] and [tex]y[/tex] have length units ([tex][l][/tex]) and [tex]t[/tex] have time units ([tex][t][/tex]). Then, we get that:

[tex][l] = A\cdot [l]^{3}[/tex] (Eq. 1)

[tex][l] = B\cdot [t][/tex] (Eq. 2)

Now we finally clear each constant:

[tex]A = \frac{[l]}{[l]^{3}}[/tex]

[tex]A = \frac{1}{[l]^{2}}[/tex]

[tex]B = \frac{[l]}{[t]}[/tex]

In a nutshell, units of A and B are [tex]\frac{1}{[l]^{2}}[/tex] and [tex]\frac{[l]}{[t]}[/tex], respectively.

Answer:

The acceleration of a small piece of ice is 10.40 m/s².

Explanation:

The electric force is given by:

[tex]F = Eq[/tex]

Where:    

E is the electric field = 1.07x10⁵ N/C

q is the charge = 1.05x10⁻¹¹ C          

The electric force is equal to Newton's second law:

[tex] Eq = ma [/tex]

Where:            

m is the mass = 1.08x10⁻⁴ g = 1.08x10⁻⁷ kg

a is the acceleration

Hence, the acceleration is:

[tex] a = \frac{Eq}{m} = \frac{1.07 \cdot 10^{5} N/C*1.05 \cdot 10^{-11} C}{1.08 \cdot 10^{-7} kg} = 10.40 m/s^{2} [/tex]

Therefore, the acceleration of a small piece of ice is 10.40 m/s².

I hope it helps you!                    

Answer:

meter

Explanation:

Answer: The International System of Units is a system of measurement based on 7 base units

Explanation: the metre, kilogram, second, ampere, Kelvin, mole, and candela. These base units can be used in combination with each other.

Answer:

The charge pass through your hair dryer is 3000 C.

Explanation:

Given that,

Power = 1200 W

Voltage = 120 V

Flow time = 5 min

We need to calculate the current

Using formula of power

[tex]P=VI[/tex]

[tex]I=\dfrac{P}{V}[/tex]

Put the value into the formula

[tex]I=\dfrac{1200}{120}[/tex]

[tex]I=10\ A[/tex]

We need to calculate the charge pass through your hair dryer

Using formula of current

[tex]I=\dfrac{Q}{t}[/tex]

[tex]Q=It[/tex]

Put the value into the formula

[tex]Q=10\times5\times60[/tex]

[tex]Q=3000\ C[/tex]

Hence, The charge pass through your hair dryer is 3000 C.

Complete Question

The complete  question is shown on the first uploaded image

Answer:

Explanation:

From the question we are told that

     The original voltage is  [tex]V_o[/tex]

     The new voltage is [tex]V  =\frac{V_o}{2}[/tex]

     The capacitance is  [tex]C = 150\ nF = 150 *10^{-9} \  F[/tex]

     The first resistance is  [tex]R_i =  26 \Omega[/tex]

      The second resistance is [tex]R_E =  200 \Omega[/tex]

Generally the equivalent resistance is  

        [tex]R_e =  R_1 + R_E[/tex]

=>     [tex]R_e =  26 +200 [/tex]

=>     [tex]R_e = 226 \ \Omega [/tex]

Generally the time constant is mathematically represented as

     [tex]\tau  =  RC[/tex]

=>  [tex]\tau  =  226 * 150 *10^{-9}[/tex]

=>  [tex]\tau  =  3.39 *10^{-5} \  s [/tex]

Generally the voltage is mathematically represented as

    [tex]V =  V_o  e^{-\frac{t}{\tau} }[/tex]

=>   [tex]\frac{V_o}{2} =  V_o  e^{-\frac{t}{\tau} }[/tex]

=>   [tex]0.5 =    e^{-\frac{t}{\tau} }[/tex]

=>   [tex]ln(0.5) =    {-\frac{t}{ 3.39 *10^{-5} } }[/tex]

=>  [tex]ln(0.5)   * 3.39 *10^{-5}  =   -t [/tex]

=>  [tex]t = 2.35*10^{-5} \  s  [/tex]