Answer:
The answer is that the pathogen has become an established part of the host's resident microbiota. :)
Have an amazing day!!
Please rate and mark brainliest!!
1. Describe what the following terms mean
Temperature -
Heat -
Exothermic -
Endothermic -
chlorine water exposed to sunlight equation?
Answer:
Cl2 (aq) + 2H2 O HOCl(aq) + Cl-(aq) + H2O Equation 1 The hypochlorous acid dissociates almost immediately into hydrogen and hypochlorite ions (OCl-).
Explanation:
How many electrons must a sulfur atom gain to achieve an octet in its valence shell?.
Answer:
Answers Anonymous answered Sulfur has 6 valence electrons so it needs 2 more for an octet and it will then have a charge of negative 2
Explanation:
The Scotch broom is an invasive species in California, Oregon and Washington. These shrubs grow quickly after areas that have been cleared of
trees and inhibit reforestation by out-competing native seedling trees. These plants developed a mutation that causes their seed to burst from
their shell when touched by passing animals. As animals brush past these plants, the black dried pods of the Scotch broom explode with a sharp
pop, scattering seeds away from the parent plant.
Which statement below best explains why the Scotch broom is able to out-compete the native plants in that area?
A. Relying on animals to disperse the seeds always results in better reproductive success than other methods of seed dispersion.
B. Specialized seed pods allow seeds to be dispersed farther and into less crowded areas promoting reproductive success.
C. The crackling sound of seed pods exploding promotes reproductive success by attracting the animals that are responsible for scattering
seeds.
D. Genetic mutations have caused the plant to be more resistant to cold temperatures allowing them to survive and reproduce all year
long.
Based on the illustration, the statement that best explains why the Scotch broom is able to outcompete the native plants in the area would be the specialized seed pods that allow seeds to be dispersed farther and into the less crowded areas.
Reproductive successDifferent organisms have different ways of behaving to ensure the survival of their propagules or offsprings.
In the case of the Scotch broom, the ability of the pods holding the seeds to burst open and catapult the seeds far away from the parent plant is a reproductive strategy to ensure that their seeds are well dispersed.
By doing so, the propagules of the plant will reach new areas where they do not exist before and as such, able to spread quite quicker than the native plants.
More on reproductive success of plants can be found here: https://brainly.com/question/811305
How do you feel about GM food?
Answer: I think it's ok, but I have a neutral stance on it.
Explanation: Foods are genetically modified to preserve them and I've had my fair share of wasted money and bad expired food, so I'm a-ok on GM food.
Answer:
Well I think that we should use more for tride or give to our allies
Explanation:
A sealed flask contains 3.82 x 1024 molecules of CO, How many moles of Co, are in the flask?
Answer:
if you meant 3.82* 10^24, the answer is 6.34551495 moles
if you meant 3.28*1024, the answer is 6.49780731*10^-21 moles
since you're going from molecules to moles, you need to divide by Avogadro's number which is 6.02*10^23
Write a summary on how to use a light microscope
DUE TODAY PLEASE HELP.
Answer:
Step 1: Connect the light microscope to a power source. If your microscope uses a mirror instead of an illuminator, you can skip this step. Instead, find a place where natural light is easily accessible
Step 2: Turn the revolving nosepiece so the lowest objective lens is in position.
Step 3: Mount your specimen onto the stage. But before doing so, see to it that your specimen is adequately protected by placing a coverslip on top of it.
Step 4: Use the metal clips to keep your slide in place. Make sure the specimen is positioned in the center, right under the lowest objective lens.
Step 5: Look into the eyepiece and slowly rotate the coarse adjustment knob to bring your specimen to focus. See to it that the slide does not touch the lens.
Step 6: Adjust the condenser for the maximum amount of light. Since you're on the low power objective, you may have to decrease the illumination. Use the diaphragm under the stage to adjust.
Step 7: Now slowly rotate the fine adjustment knob until you obtain a clearer image of your specimen.
Step 8: Examine your specimen.
Step 9: After you're done viewing with the lowest power objective, switch to the medium power objective and re-adjust the focus with the fine adjustment knob.
Step 10: Proceed to the high power objective once you have it focused.
Cyclohexane can be manufactured from hexane as shown in the equation.
C6H14 C6H12 + H2
Calculate the mass of cyclohexane that can be made from 258 g of hexane.
[Mr
of cyclohexane = 84
Mr Hexane = 86 g/mol
mol hexane = 258 : 86 = 3
mol cyclohexane = mol hexane = 3
mass cyclohexane = 3 x 84 = 252 g
What is an ionic solid?
A. A crystalline solid held together by a shared electron pool
B. A crystalline solid held together by dipole-dipole forces
C. A crystalline olid held together by covalent bonds
D. A crystalline solid held together by charge attractions
Answer:
D
Explanation:
An ionic solid is a crystalline solid held together by charge attractionsAn example is a salt crystal (Na⁺ + Cl⁻ → NaCl)An ionic solid is a crystalline solid held together by charge attractions or an ionic bond.
What is an ionic bond?
Ionic bond or electrovalent bond is a type of bond which is formed between two elements when there is an exchange of electrons which takes place between the atoms resulting in the formation of ions.
When the atom looses an electron it develops a positive charge and forms an ion called the cation while the other atom gains the electron and develops a negative charge and forms an ion called the anion.
As the two atoms are oppositely charged they attract each other which results in the formation of a bond called the ionic bond.They are good conductors of heat and electricity. They have high melting points. These compounds are brittle.
Learn more about ionic bond,here:
https://brainly.com/question/11527546
#SPJ2
Please help me and thank you and need this before Monday
How many grams of sodium metal is required to react with 0.950 grams of chlorine gas?
In a reaction involving sodium metal and chlorine gas, the amount of sodium metal required to react with 0.950 grams of chlorine gas would be 0.62 grams
Stoichiometric calculationFrom the balanced equation of the reaction:
2Na (s) + Cl2 (g) ---------> 2NaCl (s)
The mole ratio of Na to Cl2 is 2:1.
Mole of 0.950 grams of chlorine gas = 0.950/70.906
= 0.0134 moles
Equivalent mole of Na = 0.0134 x 2 = 0.0268 moles
Mass of 0.0268 moles Na = 0.0268 x 22.99
= 0.62 grams
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
What are the forms of energy that are transfer from the abiotic factors to the biotic factors and back to the abiotic factors of an ecosystem
Answer:
sunlight, light energy from the sun
Explanation:
energy is transferred from the sun to plants then animal's eat plants
what could you and your classmates do to reduce human impact on land
giving brainiest
Answer:
have controlled population!
Explanation:
Write down the structural formula for the monomer from which
polyvinyl chloride is derived.
The monomer from which the very common commercial polymer poly vinyl chloride is vinyl chloride with the formula, CH₂Cl = CH₂Cl. The PVC is formed by addition polymerization.
What is polymerization ?Polymerization is the process of combination of smaller molecules or compounds in large number to form macromolecules or polymers. There are a lot of polymers that we are using daily in the form of bags, plastics, bottles etc.
Among the common polymers we use PVC or poly vinyl chloride is very essential commercial polymer. The monomer of PVC is vinyl chlorides.
The polymerization of n vinyl chloride to form polyvinyl chloride is given below.
[tex]\rm n CH_{2}Cl = CH_{2}Cl \rightarrow (-CH_{2}Cl - CH_{2}Cl -)__{n}[/tex]
The polymerization of vinyl chloride is taking place through addition mechanism. The vinyl chloride monomer repeatedly add one by one to form the polymer.
Find more on poly(vinyl)chloride:
https://brainly.com/question/28302230
#SPJ7
found as plankton in both marine and
freshwater environments and have a
single simple eye on top of their heads
Answer:
Explanation:
Copepods. The single eye gave them the nickname of "cyclops"
3. Which of the following statements is true?
a. A lithium ion has a 1+charge because it gained
one electron.
b. A magnesium ion has a 2-charge because it
lost two electrons.
c. A sulfide ion has a 2-charge because it gained
two electrons.
d. A chloride ion has a 1+ charge because it gained
one electron.
e. An aluminum ion has a 3-charge because it lost
three electrons.
c. A sulfide ion has 2- charge because it gaines two electrons
thia statement is true.
How many hybrid orbitals form when three atomic orbitals of a central atom mix?.
Answer:
three _ _E _ _ _
Explanation:
Calculate the concentration of
5 g of sugar dissolved in 20 cm of water
Answer:
25%
Explanation:
I assume you menat 20 cm^3 of water
5 gm / 20 gm = 25 %
This type of intermolecular force relates to the
big difference in the electronegativities. It exists
when N, O or F atom attracts with hydrogen
atom. Medium strength of attraction is
exhibited
The type of intermolecular force relates to the big difference in the electronegativities and is known as hydrogen bonding.
What are intermolecular forces?Intermolecular forces may be defined as the mechanism that mediates the interaction between the atoms of the molecules. It significantly includes the electromagnetic forces of attraction and repulsion between the atoms.
Some examples of intermolecular forces include London-dispersion force, dipole-dipole interaction, van der Waals interaction, hydrogen bonds, etc. Each one of them possesses a different set of characteristic properties distinctly. Some types of forces are also present in the body of living organisms.
Hydrogen bonding is a characteristic kind of interaction that remarkably includes dipole-dipole attraction between the most electronegative elements like Nitrogen, Oxygen, fluorine, etc., and the hydrogen atom.
Therefore, hydrogen bonding is a type of intermolecular force relates to the big difference in the electronegativities.
To learn more about Intermolecular forces, refer to the link:
https://brainly.com/question/13588164
#SPJ2
Question 76 (1 point)
The volume of a gas is 4.00 liters at 293 K and constant
pressure. For the volume of the gas to become 3.00 liters,
the Kelvin temperature must be equal to
Oь
3.00 x 293
4.00
4.00 x 293
3.00
3.00 x 4.00
293
293
3.00 x 4.00
Ос
Od
Answer:
Yeah yeah i don't know what you want anybody to do with this question because you don't have all of your answers.
Why would 60g at 10C of NaCl in 200g of water would be unsaturated?
Answer:
The amount of substance needed to saturate water increases as the temperature increases.
Explanation:
How may using sorbents to clean an oil spill be helpful to the ecosystem?
Answer:
Are sorbents good for the environment?
Natural Inorganic Sorbents
Second, sorbents that sink should not be used as they could be harmful to the environment. Sinking is a problem with many sorbents, such as untreated peat moss, most inorganic sorbents, and many wood products.
Its major result is to clean out some surface contaminants, which makes it simpler for oil to absorb. On the other hand, pyrolysis, a high-temperature thermal treatment, causes the sorbent to carbonise. In turn, this greatly improves the oil sorption capacity and oil to water selectivity.
What are the advantages of using sorbents?When recovering adsorbent materials that cause secondary contamination, lighter, less viscous oil is lost through the pores more readily than heavier, more viscous oils. Application is simple because sorbents can be applied automatically or manually to spills using blowers or fans.
The best sorbents for recovering oil are typically synthetic ones. In some circumstances, a weight ratio of 40:1 for oil to sorbent can be reached, as opposed to 10:1 for organic compounds and only 2:1 for inorganic materials.
A substance used to absorb or adsorb liquids or gases is known as a sorbent. Examples comprise: a substance that works via adsorption and is comparable to molecular sieve material (attracting molecules to its surface). It has strong thermal conductivity and a big interior surface area.
Thus, On the other hand, pyrolysis, a high-temperature thermal treatment, causes the sorbent to carbonise.
To learn more about sorbents, follow the link;
https://brainly.com/question/10506730
#SPJ2
The element that doesn't occur in elemental state in nature is
Answer:
technetium, atomic number 43; promethium, number 61; astatine, number 85; francium, number 87; neptunium, number 93; and plutonium, number 94.
Explanation:
1. Set up a Bunsen burner on a heat-proof mat.
2. Take a small piece of magnesium ribbon and place it in some tongs
3. Hold the tongs at arm's length and place the magnesium ribbon in the Bunsen flame.
4. Once the magnesium is burning DO NOT LOOK DIRECTLY AT THE FAME. Magnesium burns very brightly and the light could harm your eyes.
A1. Describe what has been formed
A2. Name the reactants in this chemical reaction.
A3. List all the safety precautions you need to take while carrying out this experiment
Answer:
MAKE ME BRAINLIEST TOOK TIME!!!!
Explanation:
A1) When magnesium reacts with oxygen, it produces light bright enough to blind you temporarily. Magnesium burns so bright because the reaction releases a lot of heat. As a result of this exothermic reaction, magnesium gives two electrons to oxygen, forming powdery magnesium oxide (MgO).
A2) magnesium oxide
A3) Do not return chemicals to their original packaging. An incompatible mixture may accidentally be formed.
Keep chemical containers closed. Dust and vapour may escape from an open container, while gases and suspended material may penetrate this, causing the nature of the chemical to change. This will also avoid unnecessary exposure.
Never use a wrong or an unmarked reagent. If you are unsure about the compound, do not use it. Instead, have it disposed of (see Disposal of Hazardous Waste).
Never put spatulas, stirrers or other objects into a storage container for chemicals. Remove the contents by pouring and rolling the contents of the glass into a beaker, glass container or other suitable equipment. Spatulas may be used with caution in laboratory reagent containers. Remember the labelling (see the Safety Rules for working in lab).
Once removed from the bottle or glass, cork stoppers must be placed on a clean surface (e.g. a watch glass or other suitable equipment) with the opening facing down. This is to avoid contamination of the compound and unnecessary exposure.
Chemical bottles must not be carried by the neck of the bottle, nor next to your body. Suitable carrying arrangements should be employed, e.g. buckets or trolleys.
When pouring from bottles, the label should always face upward to prevent any spillage from destroying the label.
Never put any chemicals in the bottle other than the one indicated on the label.
Special precautions should be taken when handling concentrated acids. Dilution of acids should be performed by pouring the acid into water and stirring continuously.
How many grams are in 2.3 moles of N?
Answer:
Therefore, 40.4 grams are contained in 2 moles of Neon.
A small sample of methane burns, producing co2 and water vapor. as the hot gas mixture expands, it releases 120.0 kj of heat and does 830.0 kj of work pushing against a piston. what is the total amount of energy released in this reaction
A small sample of methane burns, releasing 120.0 kJ of heat and doing 830.0 kJ of work. The total energy released is -950.0 kJ.
What is energy?Energy is a property that is transferred to a physical system, recognizable in the performance of work and in the form of heat and light.
A small sample of methane undergoes combustion. As the hot gas mixture expands, it releases energy (E).
It releases 120.0 kJ of heat. By convention, when heat is released, we assign it a negative sign. Thus, q = -120.0 kJ.It does 830.0 kJ of work. By convention, when the system does work on the surroundings, we assign it a negative sign. Thus, w = -830.0 kJ.The change in the energy is the sum of the heat released and the work done.
ΔE = q + w = -120.0 kJ + (-830.0 kJ) = -950.0 kJ
A small sample of methane burns, releasing 120.0 kJ of heat and doing 830.0 kJ of work. The total energy released is -950.0 kJ.
Learn more about energy here: https://brainly.com/question/13881533
Given the reaction below, which is the being oxidized? mg cl2 right arrow. mg2 2cl– 2ci– ci2 mg mg2
In the given decomposition reaction of MgCl₂, the oxidized species is magnesium.
What are oxidized species?Those species which goes through the oxidation process by the addition of oxygen or by the removal of hydrogen and electrons are known as oxidized species.
Given chemical reaction is:
MgCl₂ → Mg²⁺ + 2Cl⁻
In the above reaction oxidation of magnesium takes place as they losses electrons and reduction of chlorine takes place as they gain electrons.
Hence magnesium is the oxidized specie.
To know more about oxidation reaction, visit the below link:
https://brainly.com/question/25886015
Answer: B. Mg
Explanation:
E D G E
_______ are similar to molecular formulas but show how atoms are bonded together.
Answer
The structural formula are similar to molecular formulas but show how atoms are bonded together.
Explanation:
The structural formula for a compound gives the same information as its molecular formula (the types and numbers of atoms in the molecule) but also shows how the atoms are connected in the molecule.
Inside a car that was at STP, a 1.33L bottle warms up to 102.31oC. If the volume of the bottle remains constant, what is the pressure, in atm, inside the hot water bottle
so 68 + 83 is 182 easy done
Where are the reproductive organs contained?
Answer:
In my sense your answer must be Pelvic cavity.
What is the pH of a 4.5 x 10^-3M HI solution?
A) 0.1
B) 4.8
C) 3.2
D) 2.4