Answer: b
Explanation:
It will weigh less than in San Diego. So, the correct option is (B).
What is Elevation?The elevation of a geographic location is defined as its height above or below a fixed reference point known as a geoid which is a mathematical model of the Earth's sea level as an equipotential gravitational surface.
Height is defined as the vertical distance of a point on a horizontal surface while Elevation is the height of a point above (or below) sea level.
As the Elevation is higher, the weight will be less, whereas if the Elevation is less, then the weight will be more. For example, the elevation in San Diego is 15 feet, so the weight is 115 pounds, while the elevation in Denver, Colorado, is 5,280 feet, so the weight would be less than 115 pounds.
Thus, it will weigh less than in San Diego. So, the correct option is (B).
Learn more about Elevation, here:
https://brainly.com/question/29477960
#SPJ2
Sodium reacts with chlorine to form the compound sodium chloride, or salt. The chemical formula below shows how the two elements combine into a compound.
2Na + Cl2 → 2NaCl
If the total mass of the reactants is 58.44 amu, what will be the total mass of the products?
116.88 amu
60 amu
58.44 amu
29.22 amu
Answer:
Its C
Explanation:
The law of conservation of mass says no atoms can be created or destroyed just rearranged so the mass at the beginning before the reaction would stay the same after it
Considering the Law of Conservation of Matter, the correct answer is the third option: the total mass of the products will be the same and has a value of 58.44 amu.
The Law of Conservation of Matter is also called the law of conservation of mass or the Law of Lomonósov-Lavoisier. This law postulates that "the mass is not created or destroyed, only transformed."
This means that the reagents interact with each other and form new products with physical and chemical properties different from those of the reagents because the atoms of the substances are ordered differently. But the amount of matter or mass before and after a transformation (chemical reaction) is always the same, that is, the quantities of the masses involved in a given reaction must be constant at all times, not changing in their proportions when the reaction ends.
In other words, then the mass before the chemical reaction is equal to the mass after the reaction.
So, in this case, if the total mass of the reactants is 58.44 amu, the total mass of the products will be the same and has a value of 58.44 amu.
Finally, the correct answer is the third option: the total mass of the products will be the same and has a value of 58.44 amu.
Learn more:
https://brainly.com/question/13383562?referrer=searchResultshttps://brainly.com/question/142362191. Why do plant cells have a cell wall in addition to a cell membrane?
2. Think about the function of chloroplasts. Would you expect to find
more chloroplast in the cells of leaves or the roots of a plant?
3.What two cell structures do protists have that bacteria do not?
4. Do all microbes cause disease? Explain
Answer:
Plant cells have a cell wall and chloroplasts; animal cells do not have either of these structures.
Explanation:
A major difference between a plant cell and an animal cell is presence of chloroplasts in plant cells. Another key difference between plant and animal cells is the presence of a cell wall in plant cells. Both structures are absent in an animal cells.
The cell wall surrounds the plasma membrane of plant cells. This helps to provide the required tensile strength and protection against mechanical and osmotic stress.
Cell walls also help plants to maintain shape and rigidity.
Answer:
1) Plant cells have a cell wall to strengthen the cell
2) Chloroplasts are the site of photosynthesis (turning light energy in sugar) so there would eb a lot more in the leaves that get sunlight than the roots which are underground and receive no sunlight
3) Mitochondria and nucleus
4) No. Some microorganisms are useful to humans, such as the bacteria that create yoghurt, or fungi such as penicillin which are antibiotics, which help us fight bacterial infections
describe in your own words the structure of solid sodium chloride and explain why it is formula is NACL
Answer:
Sodium chloride is formed when sodium atoms interact with chlorine atoms. When this occurs, sodium will donate an electron (which is a negatively-charged particle) to chlorine. This makes sodium slightly positive and chlorine slightly negative.
Opposite charges attract, right? So then, sodium ions will attract chloride ions and form an ionic bond. By the way, chloride is the term used to designate the anion form of chlorine. The result is a crystallized salt that has properties that are different from the two parent elements (sodium and chlorine). The chemical formula for sodium chloride is NaCl, which means that for every sodium atom present, there is exactly one chloride atom.
compounds with molecules that do not have a polar charge?
Answer:
Nonpolar molecules
Explanation:
what are some chemical properties of lead besides it’s melting and boiling points
Answer:
Atomic mass. 207.2 g.mol -1. Electronegativity according to Pauling. 1.8. Density. 11.34 g.cm-3 at 20°C. Melting point. 327 °C. Boiling point. 1755 °C.
Explanation:
i think
Which of these objects has the properties of a solid?
A.
desk
B.
water
C.
rain
D.
milk
Which sphere protects Earth’s surface?
atmosphere
biosphere
geosphere
hydrosphe
Answer:
Hiii
Explanation:
Your answer is Atmosphere
The atmosphere protects life on Earth by absorbing ultraviolet solar radiation and warming the surface through heat retention (the greenhouse effect). The atmosphere is further classified into multiple layers by temperature, which include the thermosphere, the mesosphere, the stratosphere, and the troposphere.
Hope it helps:)
a liquid can be described as a form of matter that
Answer:
That has no fixed shape but it have fixed volume.
Which term names a property of a mineral? (I'm sorry if this says Chem. I couldn't find Sci. on the list)
Answer:
Naturally occurring
Explanation:
please mark me brainliest
Answer:
Streak
Explanation:
Streak is the microscopic remains of minerals in powder form after being rubbed with porcelain plates. The streaks do not have orderly arranged lattice structure or unit cells.
They are randomly arranged and microscopic size powders. The streak of minerals cannot be distinguished easily as it mostly appears similar for all minerals.
Thus, among the given options streak is one in the property of minerals. We can rely upon streaks as it cannot be easily affected by impurities.
Overlap of the electron clouds of two atoms results in a(n)
a hydrogen bond
b dipole
C ionic bond
d covalent bond
Check it
We know that the electron clouds of two atoms overlapping is a bond, because that signifies that the electrons are being shared in a bond.
So, I'm going to go through some definitions of these different types of bonds, because they have very specific circumstances.
A hydrogen bond is a bond between an electronegative atom and a hydrogen molecule (which is not what this question says, this isn't stated anywhere).
A dipole is a difference in electron density on two different atoms (so this isn't even close to what the question is stating, a dipole is not even a bond)
An ionic bond is an unequal sharing of electrons between two atoms (because the question doesn't state this specific fact, then it can't be this option).
By process of elimination, we know the answer is covalent bond, but just in case, we can also look at the definition of a covalent bond: a bond that involves the sharing of electrons between atoms.
That is exactly what the question is asking for! Therefore, your answer is d. covalent bond
Magnesium is in Group 3. Strontium is in group 5. Which element do you predict will be less reactive in water?
Answer:
Strontium
Explanation:
strontium will be less reactive because reactivity decreases down the group
Someone pls help me I will make you brain
Answer:
c
Explanation:
Answer:
I don't know either
Explanation:
I am sorry i can not answer you
2. What are core elections? How are they represented in the shorthand electron configurations?
Answer:
In shorthand electron configuration, the electron configuration starts with the symbol of the noble gas in the previous period, followed by the additional configuration of the electrons for the given element. For example, aluminum has the atomic number 13, which is the number of protons in the nuclei of its atoms.
Explanation:
Hope this helps.
Which of the following is a physical property of matter
Answer: Physical properties of matter include color, hardness, malleability, solubility, electrical conductivity, density, melting point, and boiling point. For the elements, color does not vary much from one element to the next
Answer:
Physical properties of matter include;
evaporationcondensationsublimationfreezingmelting…and so on[tex].[/tex]
rutherford called the region that deflected alpha particles
Answer:
Rutherford concluded that these particles were striking... a tiny region of positive charge. Rutherford called the region that deflected alpha particles... a nucleus. The total volume of the nucleus of an atom is... very small compared with the rest of the atom. Except for in the simplist type fo hydrogen atom, all nuclei consist of...
Explanation:
7.
Which of the following gases is an important greenhouse gas?
a. Hydrogen
b. Nitrogen
C. Carbon dioxide
d. Oxygen
Answer:
C
Explanation:
I guess
Answer:
c. carbon dioxide
Explanation:
its the highest percentage of gas produced compared to hydrogen, nitrogen and oxygen.
Help me pls I will mark you as brain
Can someone make me a periodic table with color?
Answer:
The periodic table is also split into four blocks: s = red, p = green, d = yellow, and f = blue.
1.A sample has a mass of 15 g and a volume of 3 mL. Calculate the density.
Answer:
5 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 15 g
volume = 3 mL
We have
[tex]density = \frac{15}{3} = 5 \\ [/tex]
We have the final answer as
5 g/mLHope this helps you.
1 An atom has 24 protons, 22 electrons, and 28 neutrons. What is the atomic number of the atom?
Answer:
24
Explanation:
Save
Drag the tiles to the correct boxes to complete the pairs.
Which types of matter are these substances?
Tiles
element
compound
homogeneous mixture
heterogeneous mixture
Pairs
a cloud, which consist of small water droplets
distributed throughout the air
helium, a gas composed of identical atoms
rubbing alcohol, a liquid composed of chemically bonded
carbon, oxygen, and hydrogen atoms
sugar thoroughly dissolved in water
Submit
Answer:
1.heterogeneous mixture
2.element
3.compound
4.homogeneous mixture
Explanation:
The correct pairs are:
A cloud, which consist of small water droplets - Heterogeneous mixture
Distributed throughout the air
helium, a gas composed of identical atoms - Element
Rubbing alcohol, a liquid composed of chemically bonded - Compound
Carbon, Oxygen, and Hydrogen atoms
sugar thoroughly dissolved in water - Homogenous mixture.
In Heterogenous mixture, the composition of the mixture is not uniform. In Homogenous mixture, the composition is uniform throughout. Element is the combination of same atoms. Compound contains two or more elements.
Therefore, the correct pairs are,
A cloud, which consist of small water droplets - Heterogeneous mixture
Distributed throughout the air
helium, a gas composed of identical atoms - Element
Rubbing alcohol, a liquid composed of chemically bonded - Compound
Carbon, Oxygen, and Hydrogen atoms
sugar thoroughly dissolved in water - Homogenous mixture.
To know more about types of matter, visit:
https://brainly.com/question/28591826
#SPJ3
What type of bond forms between two atoms
with similar EN values (between nonmetals)?
covalent or ionic
Answer:
I'm sure it's covalent bond hope this helps
a) What is the role of protons in an atom?
b) How do we determine how many protons are in an atom?
Answer:
The number of electrons, in turn, determines the chemical properties of the atom.
Protons contribute to the mass of an atom and provide the positive charge to the nucleus. The number of protons also determines the identity of the element.
Electrons have a negative charge. Since the atom is electrically neutral, the number of electrons must equal the number of protons.
The electrons arrange themselves in energy levels around the nucleus. The outermost or valence electrons of an atom are the ones that take part in chemical reactions. An element’s chemical properties depend on its valence electrons.
Explanation:
What is the majority of the atom composed of *TWO WORD ANSWER* ANSWER ASAP WILL AWARD BRAINLIEST! SCAM ANSWERS WILL BE REPORTED
Answer:
Most of the atom is empty space. The rest consists of a positively charged nucleus of protons and neutrons surrounded by a cloud of negatively charged electrons. The nucleus is small and dense compared with the electrons, which are the lightest charged particles in nature..
Explanation:
Hope it helps you..
Y-your welcome in advance..
(;ŏ﹏ŏ)(ㆁωㆁ)
how many electrons do atoms like to have in their outer shell?
Explanation:
In general, atoms are most stable, least reactive, when their outermost electron shell is full. Most of the elements important in biology need eight electrons in their outermost shell in order to be stable, and this rule of thumb is known as the octet rule.
This is how fluorine appears in the periodic table.
Which is one piece of information that "9” gives about an atom of fluorine?
the atomic number
the atomic mass
the mass of neutrons
the number of neutrons
The atomic number of fluorine is 9.
What is atomic number ?The charge number of an atomic nucleus is known as the atomic number or nuclear charge number of a chemical element. It will be is equal to the proton number of every atom of that element, for ordinary nuclei. Atomic number helps to getting information of elements with the aid of periodic table.
Atomic number = count of proton
It is known that the atomic number of fluorine is 9 . therefore, the answer will be atomic number.
To know more about atomic number.
https://brainly.com/question/16858932.
#SPJ2
A 1,500-kilogram car travelling at 10 meters per second (about 22 mph) strikes a parked car on the side of the road. If the car comes to a stop in half of a second, what force is exerted on the parked car by the moving car?
The force exerted on the parked car by the moving car is –30000 N
To solve this question, we'll begin by calculating the deceleration of the moving car. This can be obtained as follow:
Initial velocity (u) = 10 m/s
Final velocity (v) = 0 m/s
Time (t) = 0.5 s
Deceleration (a) =?[tex]a = \frac{v - u}{t} \\\\ a = \frac{0 - 10}{0.5}\\\\a = \frac{- 10}{0.5}[/tex]
a = - 20 m/sFinally, we shall determine the force exerted by the moving car on the parked car. This can be obtained as follow:
Mass of moving car (m) = 1500 Kg
Acceleration (a) = - 20 m/s
Force (F) =.?F = ma
F = 1500 × (-20)
F = -30000 NNOTE: The negative sign indicate force is in opposite direction to the parked car.
Therefore, the force exerted on the parked car by the moving car is –30000 N
Learn more: https://brainly.com/question/15430805
50 POINTS!!!!!!
Reactions that occur spontaneously must reach an energy threshold before they can proceed. The graph shows the amount of energy needed for a reaction to occur. Explain how enzymes are involved in this reaction and can affect the rate of this reaction.
How does the use of synthetic products impact the natural resource from which they are derived?
Answer:
The series of chemical reactions that are used to change natural resources into synthetic products is called chemical synthesis. To make a "natural" product, the natural resource is not chemically changed as much. ... For example, the synthetic material plastic is made from petroleum, which is pumped out of the earth.
Explanation:
give brainliest!!!!
The use of synthetic products impact the natural resources from which they are derived by depleting the natural resource and causing harm to it.
What are natural resources?Resources which are obtained from nature by a few modifications in them are called natural resources.These are resources which are available in nature . Every synthetic product is composed of natural resources.
It may exist in a form of separate entity or in form of living-beings or the can even be transformed into products which are of economic importance.Because of the transformation of natural resources into products of economic importance they are getting depleted at a rate which much times greater than the rate it was getting depleted several years ago.
As the products available today comprise of synthetic products natural resources are getting depleted which is becoming a global concern.
Learn more about natural resources,here:
https://brainly.com/question/14665426
#SPJ2
What is the correct name for Fe203?
A Iron(V) oxide
B Iron(III) oxide
C Iron(I) oxide
D Iron(II) oxide
Answer:
The answer would be B.
Explanation: