In one cycle of an engine, the net change in the entropy of both reservoirs (hot and cold together) is zero. This is because the entropy of each reservoir remains constant throughout the cycle.
Entropy is a measure of the randomness and disorder of a system, so the fact that the entropy of the two reservoirs remains constant throughout the cycle is a consequence of the law of conservation of energy. The engine cycle is designed so that the energy transfers between the two reservoirs cause the entropy of each reservoir to remain constant.
In an ideal cycle, the total amount of energy transferred from the hot reservoir to the cold reservoir is equal to the total amount of energy transferred from the cold reservoir to the hot reservoir. Thus, the net change in the entropy of both reservoirs is zero. This can be shown by examining the equation for the change in entropy of a system:
ΔS = Q/T, where Q is the energy transfer and T is the temperature.
The amount of energy transferred between the hot and cold reservoirs will be the same in both directions. Thus, the temperature ratio between the two reservoirs is the same. Since the energy transfer is the same, the change in entropy for both reservoirs is equal, and the net change in entropy is zero. This can be illustrated by the following equation:
ΔS = Q/T = Q/T + Q/T = 0.
In summary, the net change in the entropy is zero. This is due to the law of conservation of energy and the fact that the temperature ratio between the two reservoirs remains constant during the cycle.
To know more about Entropy, refer here:
https://brainly.com/question/13135498#
#SPJ11
what dissolves in water burns in flames and a chemical property
The answer is a salt. Salts are ionic compounds that are composed of positively and negatively charged ions.
When dissolved in water, the ions separate and the salt dissolves. Salts also have a high melting point and when heated, they decompose into their constituent elements, producing a flame. This is a chemical property known as thermal decomposition.Thermal decomposition is a type of chemical decomposition induced by the application of heat. It is a specific type of chemical decomposition in which molecules of a compound are broken down into smaller molecules or elements. Thermal decomposition is often used in industry to produce useful chemicals, such as chlorine from table salt, and for the production of metals and alloys from ore.
learn more about thermal decomposition Refer:brainly.com/question/14949019
#SPJ1
Why does the Doppler effect detect only radial velocity?
a. For objects moving perpendicular to the line of sight, the wavelength shift can be measured only with a great error.
b. In space all bodies either converge or retreat, therefore they have only radial velocity.
c. Motion of a wave source perpendicular to the line of sight cannot cause a wavelength shift because such motion doesn't make peaks of waves closer together or farther apart.
d. Only objects moving directly toward or away from the observer can emit waves that can be detected
The correct answer is C i.e, . motion of a wave source perpendicular to the line of sight cannot cause a wavelength shift because such motion doesn't make peaks of waves closer together or farther apart.
The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source. In the case of detecting radial velocity, the observer and the wave source are either approaching or moving away from each other along the line of sight. This causes the wavelength of the observed waves to either compress or stretch, which results in a shift in frequency or color.
Option C is correct because motion perpendicular to the line of sight does not cause compression or stretching of the wavelength, which means that there is no change in frequency or color of the waves observed. Therefore, only radial velocity can be detected through the Doppler effect. Option A is also partially correct, as it is harder to measure the wavelength shift accurately for motion perpendicular to the line of sight. However, the reason for this is the lack of change in the wavelength, not the difficulty of measuring it. Option B is incorrect, as objects can have motion perpendicular to the line of sight. Option D is also incorrect, as objects moving at angles other than directly towards or away from the observer can still emit waves that can be detected.
The wavelength is not compressed or stretched by motion perpendicular to the line of sight, so there is no change in the frequency or colour of the waves that can be seen, making option C the right one.
To learn more about Doppler effect refer to:
brainly.com/question/15318474
#SPJ4
A transverse wave on a string travels at
40
m
s
40
s
m
40, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction . The vertical position of a certain point on the string over time is shown below.
What is the wavelength of the wave along the string?
To find the wavelength of the wave along the string, we first need to measure the distance between two consecutive points on the wave that are in the same phase.
How to calculate the wavelength?We can look at the graph provided by the question, whose full cycle of the wave completes in 0.1sec, i.e. demonstrating that this is a complete up and down movement of the point.
As measured in the graph, we see that the distance between two consecutive points is 0.5 cm. Then we calculate the wavelength of the wave using the following formula:
Wavelength = Distance between two consecutive peaks = 0.5cm = 0.005mTherefore, the wavelength of the wave corresponds to 0.005m.
Find out more about wavelenght of the wave on:
https://brainly.com/question/28995449
#SPJ1
(figure 1) shows a 5.4 n force pushing two gliders along an air track. the 160 g spring between the gliders is compressed. the spring is firmly attached to the gliders, and it does not sag.
Figure 1 shows a 5.4 N force pushing two gliders along an air track. The 160 g spring between the gliders is compressed. The spring is firmly attached to the gliders and does not sag. This situation demonstrates Hooke’s Law, which states that the force required to compress a spring is directly proportional to the amount of displacement of the spring. In this case, the 5.4 N force is pushing the gliders towards each other, compressing the spring and causing a displacement. As Hooke's Law states, the greater the force used to compress the spring, the greater the displacement will be.
The stiffness of the spring in this situation would be determined by the spring constant, which can be calculated using the formula F = -kx. The spring constant can be calculated by using the displacement of the spring.
When the 5.4 N force is applied, the kinetic energy of the gliders is converted into potential energy, which is stored in the compressed spring. When the force is removed, the potential energy is converted back into kinetic energy and the gliders move away from each other.
Know more about spring constant here:
https://brainly.com/question/14670501
#SPJ11
The water is reflecting light, Is this specular or diffuse reflection? explain your answer
The type of reflection occurring when light hits a surface can be determined by observing how the light is scattered.
Specular reflection occurs when light is reflected at a single angle, resulting in a clear and focused reflection. On the other hand, diffuse reflection occurs when light is scattered in many directions, producing a blurred or hazy reflection.
In the case of water reflecting light, it is likely that the reflection is a combination of both specular and diffuse reflection. When the water surface is smooth and still, light is reflected at a specific angle, resulting in a clear and focused reflection.
This is specular reflection. However, when the surface of the water is disturbed, the reflection becomes scattered and blurred, which is characteristic of diffuse reflection.
To learn more about Specular reflection refer to:
brainly.com/question/29191211
#SPJ4
A roller coaster starts at rest at the top of a 51-meter-high frictionless track. At the bottom of the track, what is the approximate speed of the roller coaster? 45 m/s
The apprοximate speed οf the rοller cοaster at the bοttοm οf the track is 31.6 m/s.
What is Speed?It is defined as the distance travelled by an οbject per unit time, and is usually expressed in meters per secοnd (m/s) οr οther units οf distance per unit time (such as miles per hοur οr kilοmeters per hοur).
Nο, the speed οf the rοller cοaster at the bοttοm οf the track is nοt 45 m/s.
Tο determine the speed οf the rοller cοaster at the bοttοm οf the track, we can use the principle οf cοnservatiοn οf energy, which states that the tοtal amοunt οf energy in a clοsed system remains cοnstant.
At the tοp οf the track, the rοller cοaster has οnly pοtential energy, which can be calculated as: PE = mgh
where m is the mass οf the rοller cοaster, g is the acceleratiοn due tο gravity (apprοximately 9.81 m/s²), and h is the height οf the track (51 meters). Assuming the mass οf the rοller cοaster is 1 kilοgram, the pοtential energy at the tοp οf the track is :
[tex]PE = (1 kg)(9.81 m/s^2)(51 m) = 502.31 J[/tex]
At the bottom of the track, all of the potential energy has been converted to kinetic energy, which can be calculated as:
[tex]KE = 1/2 mv^2[/tex]
where v is the speed of the roller coaster. Equating the initial potential energy to the final kinetic energy, we have:
PE = KE
[tex]mgh = 1/2 mv^2Solving for v, we get:v = sqrt(2gh)v = sqrt(2 x 9.81 m/s^2 x 51 m) = sqrt(999.162) = 31.6 m/s (approximately)[/tex]
Therefore, the approximate speed of the roller coaster at the bottom of the track is 31.6 m/s.
Learn more about Speed from given link
brainly.com/question/13943409
#SPJ1
an iron rod is 2.58m long at 0°c. calculate the length of a brass rod at 0°c if the difference between the length of the two rods must remain the same at all temperatures. ( linear expansivity of iron= 1.2 ×10^-5k^-1, linear expansivity of brass= 1.9 × 10^-5k^-1)
Answer:
1.63 m
Explanation:
difference between the length of iron rod and brass rod must remain same, writing it in the equation form
[tex]l_{iron} - l_{brass} = C[/tex]
where C is a constant, differentiation both sides with respect to temperature([tex]\theta[/tex]),
[tex]\dfrac{dl_{iron}}{d\theta} - \dfrac{dl_{brass}}{d\theta} = 0[/tex] ... (1)
According to linear expansion equation,
[tex]\dfrac{dl}{d\theta} = \alpha l_0[/tex]
where [tex]l_0[/tex] is the length at 0 degree Celsius.
Now,
substituting values in equation 1 we get,
[tex]\alpha_{iron}. l_{iron} - \alpha_{brass} . l_{brass} = 0[/tex]
substituting the values of respective coefficient and length of iron at 0 degree Celsius we get,
[tex]l_{brass} = 1.63[/tex] m
Hopefully, this answer helped you solve the question!
Consider the diagram of a pendulum's motion shown above. A pendulum can be used to model the change from potential energy to kinetic energy and back to potential energy. If you pull the bob back to point A and release it, potential energy is converted to kinetic energy. What do you think happens to the energy at point C?
A Potential energy is converted to kinetic energy.
B Potential energy decreases.
C Kinetic energy increases.
D Kinetic energy is converted to potential energy.
The correct answer is A. Potential energy is converted to kinetic energy.
At point C, the pendulum has reached its maximum displacement on the other side of its swing. At this point, the pendulum's velocity is zero, so its kinetic energy is also zero. However, the pendulum's height above its rest position is at its maximum, so its potential energy is at its maximum.
As the pendulum swings back toward its rest position, its potential energy will be converted back into kinetic energy. At the bottom of the swing (point A), the pendulum's potential energy will be at its minimum, and its kinetic energy will be at its maximum.
Therefore, the correct answer is: Potential energy is converted to kinetic energy.
What is Potential energy?
Potential energy is a form of energy that an object possesses due to its position or state. It is stored energy that can be converted into other forms of energy, such as kinetic energy, or released in a variety of ways.
What is kinetic energy?
Kinetic energy is a form of energy that an object possesses due to its motion. It is the energy an object has because of its motion, mass, and velocity. The faster an object moves and the more massive it is, the greater its kinetic energy will be.
The formula for kinetic energy is:
KE = 1/2 * m * v^2
where KE is kinetic energy, m is the mass of the object, and v is the velocity of the object.
To know more about kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ1
The figure shows three objects that are all made of the same material. The forces applied to the three objects all have the same magnitude.
Order the objects according to the shear stress acting on them, from greatest to least.
a) (iii) > (i) = (ii)
b) (i) = (ii) > (iii)
c) (i) > (iii) > (ii)
d) (i) > (ii) = (iii)
e) (i) > (ii) > (iii)
Shear stress is tangential tension that results from fluid moving against resistance against a solid surface. therefore (iii) > (i) = (ii) option a).
What is tangential shear stress?An item experiences deformation when an exterior force works upon it. if the force's orientation is parallel to the object's surface. Along that line, there will be a distortion. The item in this instance is under tensile or tangential tension.
The stress an object experiences is known as shearing stress or tangential stress when the path of the deforming force or exterior force is parallel to the cross-sectional area.
Shear stress results from forces that are parallel to and reside in the plane of the cross-sectional area, whereas normal stress results from forces that are perpendicular to a cross-sectional area of the substance.
Learn more about shear stress
https://brainly.com/question/30328948
#SPJ1
a 2kg toy car moves at a speed of 5 m/s. how fast is the toy car moving after it has been pushed for a distance of 2 m?
The toy car is moving at a speed of approximately 5.74 m/s after it has been pushed for a distance of 2 meters.
What principle can be used to solve the problem of finding the final velocity of the toy car after it has been pushed?The principle of conservation of energy can be used to solve the problem.
What is the initial kinetic energy of the toy car and what is the final kinetic energy of the car after it has been pushed for a distance of 2 meters?The initial kinetic energy of the car is 25 J, and the final kinetic energy of the car is (1/2) * 2 kg * (5.74 m/s)^2, which is approximately 40.97 J.
To solve this problem, we can use the principle of conservation of energy, which states that the initial kinetic energy of the toy car is equal to the final kinetic energy of the car after it has been pushed for a distance of 2 meters.
The initial kinetic energy of the car is given by:
KE1 = (1/2) * m * v1^2
where m is the mass of the car (2 kg), and v1 is the initial velocity of the car (5 m/s).
KE1 = (1/2) * 2 kg * (5 m/s)^2
KE1 = 25 J
The final kinetic energy of the car is given by:
KE2 = (1/2) * m * v2^2
where v2 is the final velocity of the car after it has been pushed for a distance of 2 meters.
Since the car has been pushed by an external force, work is done on the car, and this work is equal to the change in kinetic energy of the car. The work done on the car is given by:
W = F * d
where F is the force applied on the car, and d is the distance the car has been pushed. Since the car is moving horizontally, the force applied on the car is in the same direction as its motion, so the work done on the car is equal to the change in kinetic energy of the car.
W = KE2 - KE1
Substituting the values we get:
W = (1/2) * 2 kg * v2^2 - 25 J
W = (1/2) * 2 kg * v2^2 - 25 J = F * d = (2 kg * a) * 2 m = 4 kg m/s^2 * 2 m = 8 J
Solving for v2 we have:
v2 = sqrt((2 * (W + KE1)) / m)
v2 = sqrt((2 * (8 J + 25 J)) / 2 kg)
v2 = sqrt(66 J / 2 kg)
v2 = sqrt(33) m/s
Therefore, the toy car is moving at a speed of approximately 5.74 m/s after it has been pushed for a distance of 2 meters.
Learn more about conservation of energy here:
https://brainly.com/question/13949051
#SPJ1
A 4. 5 kg dog stands on an 18 kg flatboat at distance D=6. 1 m from the shore. It walks 2. 4 m along the boat toward shore and then stops. Assuming no friction between the boat and the water, find how far the dog is then from the shore.
mass of dog and boat are m = 4.5 kg, and M = 18 kg respectively.
Initial distance of dog from the shore, D = 4.5 m
If all planets were the same distance from the sun, which would have the largest gravitational force between itself and the sun? Why? and
If all planets were the same mass, which would have the lowest gravitational force between itself and the sun? Why?
The main function of a producer in an ecosystem is to
A.
absorb minerals from the soil.
B.
change water vapor into a liquid.
C.
make sugar through photosynthesis.
D.
break down dead plant and animal matter.
Answer:
The main function of a producer in an ecosystem is to make sugar through photosynthesis. Producers are organisms, such as plants and algae, that produce their own food using energy from sunlight, carbon dioxide from the air, and nutrients from the soil or water. Through the process of photosynthesis, producers convert light energy into chemical energy in the form of sugar, which can be used as a source of food and energy by other organisms in the ecosystem. This makes producers a critical component of the food chain and the foundation of many ecosystems. Options A, B, and D do not accurately describe the main function of a producer in an ecosystem.
A machine consists of two metal plates of equal but unknown mass and a wooden bar that is 1. 50 meters long. One plate is glued to each end of the bar. The bar rotates at a constant rate in a vertical circle around an axis through its center, so that it takes 2. 50 seconds to complete one full rotation. The glue will hold as long as the force trying to pull the plate from the bar does not exceed 58. 0 N.
Required:
What is the maximum mass of the plate that can remain glued to the bar, under these conditions?
The maximum mass of the plate that can remain glued to the bar can be determined using the maximum force that the glue can withstand.
The wooden bar rotates in a vertical circle around an axis through its center with a constant period of 2.50 seconds. The maximum force that can be exerted on each metal plate is equal to the centrifugal force acting on it due to its rotation around the axis. The centrifugal force is given by the equation Fc = mv^2/r, where Fc is the centrifugal force, m is the mass of the metal plate, v is the velocity of the metal plate, and r is the radius of the circle. In this case, the radius of the circle is equal to half the length of the wooden bar, i.e., r = 0.75 m. The velocity of the metal plate can be calculated from the equation v = 2πr/T, where T is the period of rotation. Substituting the given values, we get: v = (2π)(0.75 m)/(2.50 s) = 4.71 m/s. The maximum force that can be exerted on each metal plate is therefore: Fc = m(4.71 m/s)^2/(0.75 m) = 29.37 mN. To ensure that the maximum force does not exceed 58.0 N, the maximum mass of each metal plate can be calculated by dividing the maximum force by the acceleration due to gravity (9.81 m/s^2): mmax = 58.0 N/(2 × 9.81 m/s^2) = 2.96 kg. Therefore, each metal plate can have a maximum mass of 2.96 kg to avoid exceeding the maximum force that the glue can withstand.
To learn more about Force click the link below
brainly.com/question/13014979
#SPJ4
what would be the mass of a truck if it is accelerating at a rate of 5 m/s^2 and hits a parked car with a force of 14,000N
how fast, in meters per second, is object a moving at the end of the ramp if it's mass is 115 g, it's radius 17 cm, and the height of the beginning of the ramp is 14 cm?
The required object A is moving at a speed of 2.62846 m/s at the end of the ramp.
To determine the speed of object A at the end of the ramp, we can use the principles of conservation of energy and rotational motion.
Given:
Mass of object A (m) = 115 g = 0.115 kgRadius of the ramp (r) = 17 cm = 0.17 mHeight of the beginning of the ramp (h) = 14 cm = 0.14 mFirst, let's calculate the potential energy (PE) of object A at the beginning of the ramp. The potential energy can be given by:
PE = m * g * h,
PE = 0.115 * 9.8 * 0.14 = 0.1628 J
At the end of the ramp, the potential energy is fully converted into kinetic energy (KE). The kinetic energy can be given by:
KE = (1/2) * I * ω²,
For a solid sphere rolling without slipping, the moment of inertia (I) can be given by:
I = (2/5) * m * r²,
I = (2/5) * 0.115 kg * (0.17 m)² = 0.00132 kg·m²
Now, we can relate the linear speed (v) and the angular velocity (ω) of the rolling object. For a solid sphere rolling without slipping, the relationship is:
v = ω * r,
ω = v / r.
Next, we equate the potential energy at the beginning of the ramp to the kinetic energy at the end of the ramp:
PE = KE
m * g * h = (1/2) * I * ω²
0.115 * 9.8 * 0.14 = (1/2) * 0.00132 * (v / r)²
0.115 * 9.8 * 0.14 = 0.00132/2 * (v / 0.17 )²
v = 2.62846
Therefore, object A is moving at a speed of 2.62846 m/s at the end of the ramp.
Learn more about motion on-ramp here:
https://brainly.com/question/31821992
#SPJ6
In the 50/30/20 rule, what does 50 represent?(1 point)
In the 50/30/20 rule, 50 represents the percentage of your after-tax income that you should allocate towards your essential expenses.
What does 50 represent?These are the necessary expenses that you need to pay for in order to live, such as housing, utilities, groceries, transportation, and healthcare. By allocating 50% of your after-tax income towards these essential expenses, you can ensure that you are meeting your basic needs and maintaining a stable lifestyle.
The other percentages in the 50/30/20 rule refer to the remaining portions of your after-tax income. 30% should be allocated towards your discretionary spending, which includes non-essential expenses such as entertainment, dining out, travel, and hobbies. The final 20% should be allocated towards your financial goals, such as paying off debt, building an emergency fund, and saving for retirement or other long-term goals.
Learn more about 50/30/20 rule here:https://brainly.com/question/28135116
#SPJ1
580 nm light shines on a double slit with d=0. 000125 m. What is the angle of the third dark interference minimum(m=3)?
580 nm light shines on a double slit with d=0. 000125 m. the angle of the third dark interference minimum(m=3) is 0.76 degrees.
The angle θ of the third dark interference minimum can be calculated using the equation:
sin θ = (m λ) / d
where m is the order of the interference minimum, λ is the wavelength of the light, and d is the distance between the slits.
In this case, m = 3, λ = 580 nm = 5.80 × 10^−7 m, and d = 0.000125 m. Plugging in these values, we get:
sin θ = (3 × 5.80 × 10^−7 m) / 0.000125 m
solving this, we get:
sin θ = 0.0132
Taking the inverse sine of both sides, we get:
θ = sin−1 (0.0132)
Using a calculator, we find:
θ ≈ 0.76 degrees
Therefore, the angle of the third dark interference minimum is approximately 0.76 degrees.
For such more questions on angle of the interference:
brainly.com/question/27901588
#SPJ11
Suppose an electron is described by the wavefunction for , and zero otherwise, with 2 nm. Let's estimate the spread of the electron's position probability distribution by the expression. 1)what is for this wavefunctions?
The wavefunction number for the specified function is:Ψ(x) = [tex][2/(\alpha (1 - e^{(-4nm/\alpha )))}]e^{(-x/\alpha )}[/tex]
The wavefunction given is:
Ψ(x) = A[tex]e^{(-x/\alpha )}[/tex]
where Ψ(x) is the wavefunction, A is a constant, x is the position of the electron and α is a constant with units of length.
The normalization condition is:
∫|Ψ(x)|² dx = 1
Since Ψ(x) is zero outside the range (0, 2nm), the integral can be simplified to:
∫[tex]0^(2nm)|Ae^{(-x/\alpha )}|[/tex] ²dx = 1
Simplifying the integral further:
[tex]|A|^{2} (-\alpha /2) (e^{(-4nm/\alpha ) - 1)} = 1[/tex]
Since the wavefunction is normalized, |A|² is equal to the inverse of the integral above. Solving for |A|², we get:
|A|² = [tex][-2/(\alpha (e^{(-4nm/α) - 1))}][/tex]
Thus, the wavefunction is:
Ψ(x) = [tex][2/(\alpha (1 - e^{(-4nm/\alpha )))}]e^{(-x/\alpha )}[/tex]
So, the value of the wavefunction for this given function is:
[tex][2/(\alpha (1 - e^{(-4nm/\alpha )))}]e^{(-x/\alpha )}[/tex]
To learn more about wavefunctions refer to:
brainly.com/question/29089081
#SPJ4
Please help with this, Im a little stuck!!
Answer:
Jwbsbsbdjeiskbsj3kabajj2jjj1jj2j2j3jkkkk3j3j2
A negatively charged rod is brought near a metal can and the can attracts to the rod. Then additional negative charges are added to the rod and the experiment is repeated. How will the electrostatic and gravitational force between the rod and can change?
The electrostatic force between the negatively charged rod and the metal can will increase when additional negative charges are added to the rod, while the gravitational force between them will remain the same.
This is because the electrostatic force between the rod and the can is proportional to the charge on the rod and the distance between them, according to Coulomb's law. Adding additional negative charges to the rod increases its total charge, which in turn increases the electrostatic force between the rod and the can.
On the other hand, the gravitational force between the rod and the can is determined by their masses and the distance between them, according to the law of gravitation. Since neither the mass nor the distance between the rod and can changes in this experiment, the gravitational force remains the same.
To know more about electrostatic force, here
brainly.com/question/9774180
#SPJ4
Two bar magnets are placed on the table a few inches apart. Then a compass is placed near them, as shown below. Draw an arrow on the compass that represents the direction the needle will point because of the magnetic field between the magnets. Explain what would cause the compass needle to point in that direction using the terms magnetic force and magnetic field.
Answer:
Explanation:
The reson that the north of the compas pin points in that direction is because ,that is Earth magnetic south pole is and that is where they attract
the mass of the moon is 7.348e22 kg and its radius is 1738 km. what would be the weight of a 65 kg person standing on the moon?
The weight of a 65 kg person standing on the moon with a mass of 7.348e22 kg and a radius of 1738 km would be approximately 105.3 N.
The weight of a 65 kg person on the moon can be calculated using the formula:
Weight = mass x gravitational acceleration
where mass is the mass of the person, and gravitational acceleration is the acceleration due to gravity on the surface of the moon.
The gravitational acceleration on the surface of the moon is given by:
g = G*M/R^2
where G is the gravitational constant, M is the mass of the moon, and R is the radius of the moon.
In this case, the mass of the moon is M = 7.348e22 kg, and the radius of the moon is R = 1738 km = 1.738e6 m. The gravitational constant is G = 6.6743e-11 Nm^2/kg^2.
So, the gravitational acceleration on the surface of the moon is:
g = G*M/R^2 = (6.6743e-11 Nm^2/kg^2) x (7.348e22 kg) / (1.738e6 m)^2
= 1.62 m/s^2
Now, we can calculate the weight of a 65 kg person on the moon:
Weight = mass x gravitational acceleration
= 65 kg x 1.62 m/s^2
= 105.3 N
Therefore, a 65 kg person would weight about 105.3 N on the surface of the moon.
Learn more about weight on moon: https://brainly.com/question/31039813
#SPJ11
the mass of the blue puck is 20% greater than the mass of the green one. before colliding, the pucks approach each other with equal and opposite momenta, and the green puck has an initial speed of 10 m/s. find the speed of the pucks after the collision, if half the kinetic energy is lost during the collision.\
To find the speed of the green and blue pucks after the collision, we can use the conservation of momentum and the conservation of energy equations and it is 3.33 m/s and 2.78 m/s respectively.
First, let's find the mass of the blue puck. If the mass of the blue puck is 20% greater than the mass of the green one, then:
m (blue) = 1.2 * m (green)
Next, let's use the conservation of momentum equation:
m (green) * v (green), initial + m (blue) * v (blue), initial = m (green) * v (green), final + m (blue) * v (blue), final
Since the pucks approach each other with equal and opposite momenta, we can set v (blue), initial = -v (green), initial = -10 m/s. Plugging in the values we know:
m (green) * 10 + 1.2 * m (green) * (-10) = m (green) * v (green), final + 1.2 * m (green) * v (blue), final
Next, let's use the conservation of energy equation. If half the kinetic energy is lost during the collision, then:
0.5 * m (green) * v (green), initial2 + 0.5 * m (blue) * v (blue), initial2 = 0.5 * (m (green) * v (green), final2 + m (blue) * v (blue), final2)
Plugging in the values we know:
0.5 * m (green) * 102 + 0.5 * 1.2 * m (green) * (-10)2 = 0.5 * (m (green) * v (green), final2 + 1.2 * m (green) * v (blue), final2)
Now we can solve for the final velocities of the pucks using these two equations. We get:
v (green), final = -3.33 m/s
v (blue), final = 2.78 m/s
Therefore, the speed of the green puck after the collision is 3.33 m/s and the speed of the blue puck after the collision is 2.78 m/s.
To know more about conservation of momentum, refer here:
https://brainly.com/question/3920210#
#SPJ11
A reservoir has a surface area of and an average depth of 40. 0 m. What mass of water is held behind the dam? (See
Figure 11. 5 for a view of a large reservoir—the Three Gorges Dam site on the Yangtze River in central China. )
The density of water ρ from Table 1 is [tex]1.000 * 10^{3} kg / m^{3}[/tex] . Subbing V and ρ into the expression for mass gives:m= [tex]V=Ah=(50.0km^{2} )(40.0m)\\=[(50km^{2} ) (\frac{10^{3}m }{1km} )^2] (40.0m) = 2.00 * 10^{9} m^{3}[/tex]
We can ascertain the volume V of the supply from its aspects, and track down the density of water ρ in Table 1. Then, at that point, the mass m can be tracked down in the meaning of density.
[tex]p =\frac{m}{v}[/tex]
Tackling condition ρ = m/V for m gives m=ρV.
The volume V of the supply is its surface region Multiple times its typical profundity h:
[tex]V=Ah=(50.0km^{2} )(40.0m)\\=[(50km^{2} ) (\frac{10^{3}m }{1km} )^2] (40.0m) = 2.00 * 10^{9} m^{3}[/tex]
The density of water ρ from Table 1 is [tex]1.000 * 10^{3} kg / m^{3}[/tex] .
Subbing V and ρ into the expression for mass gives:
[tex]m= (1.00 * 10^3kg / m^3) (2.00* 10^9m^3) \\ = 2.00 * 10^{12} kg[/tex]
An enormous supply contains an extremely huge mass of water. In this model, the heaviness of the water in the repository is mg=1.96× [tex]10^{13}[/tex] N, where g is the speed increase because of the Earth's gravity (around 9.80[tex]m/s^{2}[/tex] ). It is sensible to find out if the dam should supply a power equivalent to this colossal weight. The response is no. As we will find in the accompanying segments, the power the dam should supply can be a lot more modest than the heaviness of the water it keeps down.
to know more about density click here:
https://brainly.com/question/1354972
#SPJ4
the complete question is:
A reservoir has a surface area of [tex]50.0 km^{2}[/tex] and an average depth of 40.0 m. What mass of water is held behind the dam? (See Figure 2 for a view of a large reservoir—the Three Gorges Dam site on the Yangtze River in central China.)
The motion of an object changes only when a(n) net force acts on it according to Newton’s first law.True or False
True, The motion of an object changes only when a(n) net force acts on it according to Newton’s first law.
What is Newton's first law of motion?Newton's first law of motion, also known as the law of inertia, states that an object at rest will remain at rest, and an object in motion will remain in motion with a constant velocity, unless acted upon by a net external force.
Can an object in motion continue to move without any external force acting on it?No, according to Newton's first law of motion, an object in motion will continue to move with a constant velocity only if there is no net external force acting on it. Any change in motion requires the application of a net force.
Learn more about "Newton’s first law." here:
https://brainly.com/question/29775827
#SPJ1
Which of the following is an example of a transverse wave?
A. longitudinal waves traveling through the ground
B. sound waves traveling through the air
C.light waves traveling from the sun
D.All of these
Answer:
all of these
Explanation:
D. all of these is the correct answer
Two metal balls with the same mass hang so that they are touching each other. The ball on the left is pulled to the side
and released. What will happen when it swings back and hits the ball on the right?
Both balls will swing to the left.
The ball on the left will stop, and the ball on the right will remain still
The ball on the right will swing to the right.
Both balls will swing to the right.
When the ball on the left is pulled to the side and released, it will swing back and hit the ball on the right. Upon impact, the momentum of the left ball will be transferred to the right ball, causing the right ball to start swinging to the right while the left ball will come to a stop.
Therefore, the correct answer is: "The ball on the right will swing to the right." Option C
What is momentum about?In physics, momentum is a property of moving objects that is determined by both their mass and velocity. It is defined as the product of an object's mass and velocity, and it is a vector quantity, which means it has both magnitude and direction.
Mathematically, momentum (p) is expressed as:
p = m * v
where m is the mass of the object and v is its velocity.
Momentum is conserved in a closed system, meaning that the total momentum of the system remains constant unless an external force acts on it. This is known as the law of conservation of momentum, which is a fundamental principle of physics. The law of conservation of momentum has many practical applications, from understanding the behavior of collisions in billiards or car accidents, to designing spacecraft trajectories, to studying the behavior of subatomic particles
Learn more about momentum from
https://brainly.com/question/30366873
#SPJ1
The table summarizes the known values for a completely elastic collision. Given the information, what is the mass of ball 2?
Therefore, the mass of ball 2 is approximately 24.7 kg.
What is collision?A collision is an event that occurs when two or more objects come into contact with each other in a way that alters their motion. In physics, collisions are studied in terms of the conservation of momentum and the conservation of kinetic energy. In an elastic collision, the total kinetic energy of the system is conserved, and the objects bounce off each other without any loss of energy. In an inelastic collision, some of the kinetic energy is converted into other forms of energy, such as heat or sound, and the objects may stick together after the collision. Collisions can be categorized into two types: head-on collisions and oblique collisions. In a head-on collision, the objects approach each other directly from opposite directions, while in an oblique collision, the objects approach each other at an angle. Collisions are an important concept in physics and have applications in fields such as engineering, transportation, and sports. Understanding the principles of collisions can help us design safer cars, improve the performance of athletic equipment, and develop new technologies for space exploration.
Here,
We can use the conservation of momentum and the conservation of kinetic energy to solve for the mass of ball 2 in the completely elastic collision. Using the conservation of momentum:
m1v1i + m2v2i = m1v1f + m2v2f
Substituting the known values:
(6.7 kg)(2.0 m/s) + m2(-5.0 m/s) = (6.7 kg)(-6.18 m/s) + m2(0.83 m/s)
Simplifying and solving for m2:
(13.4 - 33.9) kg·m/s = -44.006 kg·m/s + 0.83 m2
-20.5 kg·m/s = 0.83 m2
m2 = (-20.5 kg·m/s) / (0.83 m/s)
m2 ≈ 24.7 kg
To know more about collision,
https://brainly.com/question/6958526
#SPJ9
A conductor of square with sides of length 2d, carries a current I uniformly distributed throughout its cross-sectional area.
The current in the conductor is directed out of the screen.
Ampère’s law is applied along the circle that touches the four sides of the conductor.
Select the expression that correctly represents the magnitude of the integral around the circle.
Group of answer choices
µ0(πd2I)
µ0(2πdI)
µ0(πI/4)
µ0(4I/π)
If you cut a wire directly and squarely across its width, the end will look like a circle. The cross sectional is the area of that end.
What is a conductor's cross sectional area?If you cut a wire directly and squarely across its width, the end will look like a circle. The cross sectionarea is Pi x r2, which is the area of that end. When the wire type is the same, a larger cross section area results in lower resistance per foot.
What is the relationship between conductor length and cross section area?It is assumed that the cross's length and area The conductor's section is doubled. This means that the new length and cross sectional area are both 2l and 2A. As a result, the new resistance of the conductor is R′=2l2A=lA.
To know more about conductor visit:-
https://brainly.com/question/28189448
#SPJ1