In an experiment to determine the density of a substance the following results were
obtained. Use the results to plot a graph of mass against volume.
Mass (g) 10 20 30 40 50 60 70 80 90
Volume (cm 3 ) 0.5 1.0 1.4 2.0 2.2 2.6 3.0 3.6 4.5
a) Find the gradient of the graph.
b) What does the gradient represent?
c) What is the mass when the volume is 1.5cm 3 ?
d) What is the volume when the mass is 65g?
Answers
Answer:
a) Gradient = rise/run = mass/volume
since the graph is mass against volume we know mass is on the y-axis and volume is on the x-axis
in physics it’s best to use a larger part of the graph to find the gradient, so imma use the biggest values.
90/4.5 = 20
(additional note: sometimes you may get a different gradient. For example, when using 30 and 1.4 you get ≈21 this is an anomalous result since ita gradient differs; a mass against volume graph is supposed to be linear)
b) gradient represents density (p) since gradient is = mass/volume. And density also = mass/volume
For c and d just plot the points and you’ll be able to read from the graph to get the values.
I got this graph (the image)
but you’ll be able to interpret better when ‘you’ draw it (so try plotting it)
Related Questions
Three of the forces in nature attract particles together, with varying strengths, to build the universe. Which is the only one that energizes the universe by making nuclear fusion possible
Answers
Answer:
The photon or quantum of light
Explanation:
whaT HAPPENS WHEN a net force act's
on a moving object
Answers
Explanation: I just know
If professor X can move things with his mind.Then why cant he move his legs?
Answers
Answer: Varies
Explanation:
Because moving his legs require force.
Answer:
He is also a low-level telekinetic
Explanation:
He is a telepath and doesn’t have telekinesis btw.
What do these two changes have in common
a slice of banana turning brown
bleaching clothes
Answers
Answer:
They get air inside
Explanation:
bananas turn brown when air is inside
Which explains why scientists often prefer to measure mass rather than weight?
It is always the same.
It is affected by gravity.
Answers
Answer:
scientists often prefer to measure mass rather than weight because weight is affected by gravity while mass is not. Mass is always the same.
Explanation:
Weight is a force rather than a measure of the amount of matter something contains. The same amount of matter can have different weights depending on where it is. Mass directly measures the amount of matter present and remains the same no matter where it's measured.
is climbing stairs work done
Answers
Answer:
The work you did in climbing the stairs is the force you applied (your weight) times the distance you moved upward (the height of the stairs.) So yes, climbing stairs is work done.
Explanation:
Hope this helped, nya~ :3
the source of a magnetic field is a moving _________.
Answers
Answer:
electron
Explanation:
The source of a magnetic field is a moving _________.
\/
The source of a magnetic field is a moving electron.
The spinning of the electrons around the nucleus of an atom creates a magnetic field.
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
A student wants to show the transfer of heat energy without matter. Which investigation design would best help the student
Answers
Answer:
C
Explanation:
Answer:
C) an investigation of conduction through collisions between particles in space
As the skydiver's ______increases, so does the magnitude of the force due to friction.
Answers
Answer:
speed?
Explanation:
give me more information
What are some simple machines that decrease mechanical advantage used to do? increase work decrease work multiply distance to increase speed.
Answers
Answer:
Wheel and axleForce multipliersLeverInclined planePulleyScrewWedgeExplanation:
Simple machines are devices with no, or very few, moving parts that make work easier. Many of today's complex tools are just combinations or more complicated forms of the six simple machines, according to the University of Colorado at Boulder. For instance, we might attach a long handle to a shaft to make a windlass, or use a block and tackle to pull a load up a ramp. While these machines may seem simple, they continue to provide us with the means to do many things that we could never do without them.
Have a great day! :D
Some machines decrease mechanical advantage and are utilized to multiply distance to decrease speed.
What is the mechanical advantage?Mechanical advantage can be described as a measure of the ratio of output force to input force in a system. Mechanical advantage is used to analyze the forces in simple machines such as levers and pulleys.
Mechanical Advantage= output force (load) /input force(effort)
The mechanical advantage will increase as the slope of the inclined plane decreases but the load has to move with more distance. Under the mechanical advantage, the distance the load will move will be a fraction of the distance through applied force.
Thus, the mechanical advantage is decreased by some simple Machines decrease and are used to multiply distance to decrease speed.
Learn more about Mechanical advantages, here:
brainly.com/question/16617083
#SPJ2
As the temperature of an air mass increases, its atmospheric pressure______. Group of answer choices
Answers
Answer:
its atmospheric pressure decreases
When the temperature of an air mass increases, its atmospheric pressure drops
ok done. Thank to me :>
a person walks 9 meters to the right and 8 meters to the left what's the distance and displacement
Answers
Answer:
walked: 17 meters
displacement: 1
Explanation:
so you add 9+8 and the displacement is 1 b/c when you moved back those 8 meters you were still 1 meter away from where you where originally standing
A runner slows down after completing a race. Her deceleration is 0.25 m/s2. After 5 s she is travelling at 4 m/s, determine her initial velocity.
Answers
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
The initial velocity of the runner is 5.25 m/s.
What is deceleration?
You've probably seen that when there's a lot of traffic and there are more bikes blocking us, we tend to slow down the speed of our bikes.
Therefore, deceleration is defined as a reduction in speed as the body moves away from the beginning location. The opposite of acceleration is deceleration.
Given parameters:
Deceleration of the runner: a = 0.25 m/s².
Time interval: t = 5 second.
Final velocity: v = 4 m/s.
We have to find initial velocity of the runner: u = ?
From definition of deceleration, it can be written that:
deceleration = (initial velocity - final velocity) time interval
0.25 = (u -4)/5
u = 5.25 m/s.
Hence, initial velocity of the runner is 5.25 m/s.
Learn more about deceleration here:
https://brainly.com/question/4403243
#SPJ2
Which of the following explains why NASA mandated that space food could NOT crumble or come apart?
Crumbs may cause electronics to malfunction.
There is no way to clean crumbs, so all food must be contained.
Floating crumbs may get into astronauts’ eyes.
Crumbs increase the risk of bacteria development.
Answers
Answer:
C.
Floating crumbs may get into astronauts’ eyes.
A crankshaft of an engine increases its spin from 1,000 rpm to 1,500 rpm in 0.5 s. What is its angular acceleration? (1 rev=2π rad)
600 rad/s2
100 rad/s2
500 rad/s2
60 rad/s2
Answers
the answer is 100 rad/s2
A flea sits on the edge of a classic record album that is making 1 revolution in 0.56s. The flea is 0.20m from the center of the record
a. what is the fleas velocity?
b. What is the fleas centripetal acceleration?
Answers
Hi there!
We can begin by finding the angular velocity using dimensional analysis:
[tex]\frac{1 rev}{0.56 s} * \frac{2\pi rad}{1 rev} = 11.22 rad/sec[/tex]
(A)
Find the flea's velocity using the following relationship:
v = ωr
v = (11.22)(0.20) = 2.24 m/s
(B)
Centripetal acceleration is given by:
a = ω²r
a = (11.22²)(0.20) = 25.18 m/s²
A car is moving at a speed of 72 km / h on a horizontal section. What is the braking distance of the car if the friction force is equal to the size of the weight of the car? (20 m) (+ formula)
Answers
Answer:
20.4m
Explanation:
72kmhr(1000mkm)(hr3600sec)=20ms
Use principles of conservation of energy.
The initial kinetic energy of the car is equal to the work done by friction during braking:
KE=Wfric
12mv2=(Ffric)d
but the force of friction = weight of the car = mg
12mv2=mgd
mass cancels in both terms, which tells us the answer is independent of mass
12v2=gd
12202=(9.81)d
d=20.4m
Note that the correct answer should actually be 20. m with only 2 significant figure accuracy since 72 km/hr only has 2 sig fig accuracy.
The surface of this planet is obscured by an atmosphere of thick clouds and toxic gases. What planetary body is it
Answers
Answer:
Venus....
Explanation:No explanation just simple answers
A box of mass 6.0 kg is accelerated from rest
across a floor at a rate of 6.0 m/s² for 9.0 s.
Find the network done on the box
Answers
[tex]\text{Given that },\\\text{Mass, m = 6 kg}\\\\\text{Acceleration, a = 6 } \text{m} \text{s}^{-2}\\\\\text{Time, t=9 sec}\\\\\text{Displacement, }s=ut + \dfrac 12 at^2 = \dfrac 12 at^2 = \dfrac 12 \times 6 \times 9^2 = 243 ~m}\\\\\ \text{Work,} ~W = Fs = mas = 6 \times 6 \times 243 = 8748 ~ J}[/tex]
Hi there!
We know that:
[tex]W = \Delta KE = \frac{1}{2}m(\Delta v)^2[/tex]
We can begin by solving for the final velocity using the equation:
[tex]v_f = v_i + at[/tex]
The box starts from rest, so:
[tex]v_f = at\\\\v_f = 6(9) = 54 m/s[/tex]
Now, we can find the kinetic energy:
[tex]KE = \frac{1}{2}mv^2\\\\KE = \frac{1}{2}(6)(54^2) = 8748 J[/tex]
Thus:
[tex]W = \Delta KE\\\boxed{W = 8748 J}[/tex]
what is the medium for the sound waves for whales to communicate with each other?
Answers
Answer:
SONGS CLICKS AND WHISTLE
Explanation:
plz help, dont need to do the last question
Answers
Answer:
Explanation:
I dont understand what its saying .....?
Newton’s First Law of Motion applies to
1) objects at rest
2) objects in motion
3) both moving and non moving objects
4) objects that are accelerating
Answers
Answer:
3) both moving and non moving objects
Hope it helps:)
the pressure inside a latex balloon is nearly the same as the pressure outside. if you let a helium balloon go, and if, as it rises, it stays at a constant temperature, the volume of the balloon will
Answers
Answer: If you let a helium balloon go, and if, as it rises, it stays at a constant temperature, the volume of the balloon will. The magnitude of the buoyant force is equal to the weight of the amount of fluid that has the same total volume as the object.
If you let a helium balloon go, it rises, it stays at a constant temperature, the volume of the balloon will increases.
What is volume?A measurement of three-dimensional space is volume. Several imperial or US customary units, as well as SI-derived units (such the cubic meter and liter), are frequently used to quantify it quantitatively (such as the gallon, quart, cubic inch). Volume and length (cubed) have a symbiotic relationship.
The density for helium remains lower than that of air, therefore when the balloon is inflated with that as well, it rises. The atmosphere's pressure continues to drop as it rises, which causes the internal pressure to rise. The balloon's volume of the balloon will increase.
Therefore, the volume of the balloon will increase.
To learn more about volume, here:
https://brainly.com/question/23477586
#SPJ2
Nbel! You’re okay! What happened to you?
Answers
Answer:
Wanna be frie nds?
Explanation:
Im smort big brain
Answer:
hello wanna be fr iends and cha-t?
Explanation:
Do distance and Gravity have a _____ relationship?
Answers
Answer:
proportional...?
Explanation:
not sure if thats correct...
hope this helped tho
try your best!
mark me brianliest :D
Sound is repeated near hills. Give reason
Answers
Explanation:
Sound is repeated near hills due to reverberation. The sound effect is prolonged is an empty room because , in a furnished room, reverberation occurs less than in a room with no furniture.
Answer:
sound that occurs in nature, such as those of animal, trees, people, the wind, the rain, etc. are the natural sounds. it is heard near the hill because of the echo and the reverberation of the sound
Match these items. Match the items in the left column to the items in the right column. 1 . gravitational force the physical law nicknamed "action-reaction" 2 . Newton's First Law the physical law that states that planetary orbits are ellipses 3 . Copernican system described as a field 4 . Kepler's First Law the model of a planetary system that has the earth at the center 5 . Kepler's Second Law an example of a heliocentric system 6 . centripetal force the physical law that states that R3\T2 = K for a system 7 . Kepler's Third Law a spacecraft cruising at v = constant with its rockets shut down 8 . geocentric system the physical law that relates acceleration to net force 9 . Newton's Third Law gravitational force that keeps planets in orbit 10 . Newton's Second Law the physical law that states that equal areas are swept out in equal times
Answers
Answer:
i can't tell which is left and right
Explanation:
Answer:
1. gravitational force = described as a field
2. Newton's First Law = a spacecraft cruising at v = constant with its rockets shut down
3. Copernican system = an example of a heliocentric system
4. Kepler's First Law = the physical law that states that planetary orbits are ellipses
5. Kepler's Second Law = the physical law that states that equal areas are swept out in equal times
6. centripetal force = gravitational force that keeps planets in orbit
7. Kepler's Third Law = the physical law that states that R3\T2 = K for a system
8. geocentric system = the model of a planetary system that has the earth at the center
9. Newton's Third Law = the physical law nicknamed "action-reaction"
10. Newton's Second Law = the physical law that relates acceleration to net force
What is the equation to calculate speed?
Answers
Answer:
the equation :-
speed = distance ÷ time
Speed = distance ÷ time
You can also write this as, s = d/t
Hope this helps!
Trên một sợi dây đàn hồi dài 1,2 m hai đầu cố định đang có sóng dừng Biết sóng truyền trên dây có tần số 100 Hz và tốc độ 60 m trên giây số nút sóng trên dây là
Answers
Answer:english please
Explanation:
L=Kx(lamđa/2) mà lamđa=v/f=0,6
=>1,2=Kx(0,6/2)=>K=4 mà vì dây đàn là 2 đầu cố định nên số bụng sống là K+1=>K=5
A 12 N force is used to extend a spring with a spring constant of 84 N/m. Calculate the extension of the spring.
Answers
Answer:
72n
Explanation: