In a molecule of water (H2O), two hydrogen atoms are each bonded to one oxygen atom. What forms each of the two bonds?

Answer:

This study is an overview of previous studies on lime (quick and hydrated) -treated soil. Lime is the oldest traditional stabilizer used for soil stabilization. The mechanism of soil-lime treatment involves cation exchange, which leads to the flocculation and agglomeration of soil particles. The high pH environment then causes a pozzolanic reaction between the free Ca+2 cations and the dissolved silica and alumina. Lime-treated soil effectively increases the strength, durability and workability of the soil. Such treatment also improves soil compressibility. A fluctuation behavior was observed on the influence of lime on soil permeability. However, the factors affecting the permeability of the soil-lime mixture should be extensively studied. Nonetheless, lime treatment has a number of inherent disadvantages, such as carbonation, sulfate attack and environment impact. Magnesium oxide/hydroxide are thus proposed as a suitable alternative stabilizer to overcome at least some of the disadvantages of using lime in soil stabilization.

Explanation:

Actually I have a pdf on it to explain more if you want but how to get it to you is the issue. well I'm guessing the one I've put out should be very much okay, I hope so .

The hydrogen ion concentration [H3O+] in an egg white containing 6.3 × 10-⁷M of [OH-] is 1.5 × 10-⁸M.

The hydrogen ion concentration of a solution can be calculated as follows:

pOH = - log [OH-]

pOH = - log [6.3 × 10-⁷M]

pOH = - [-6.2]

pOH = 6.2

Since pOH + pH = 14

pH = 14 - 6.2

pH = 7.8

pH = - log [H3O+]

7.8 = - log [H3O+]

[H3O+] = 10-⁷:⁸

[H3O+] = 1.5 × 10-⁸M

Therefore, the hydrogen ion concentration [H3O+] in an egg white containing 6.3 × 10-⁷M of [OH-] is 1.5 × 10-⁸M.

Learn more about hydrogen ion concentration at: https://brainly.com/question/15082545

Explanation:

please mark me as brainlest

The solubility curve can show the variation of solubility with temperature.

A saturated solution is one in which there is just enough solute as it can dissolve at a given temperature. The imege is missing hence the question is incomplete.

The solubility curve shows us the solubility of each substance but unfortunately we do not have it hence we can not answer the questions but we do know that the solubility curve can show the variation of solubility with temperature.

Learn more about solubility curve: https://brainly.com/question/14366471

Answer:

Explanation:

The relation between molecular (formula) mass and molar mass page 44 . To obtain one mole of copper atoms (6.20 x 1023 ne atoms) weigh out 63.55 g copper. The molar mass (M) of a substance is the mass of one mole of entities (atoms, molecules, or formula units) of the substance.

Answer:

...

Explanation:

Explanation:

BECAUSE I DONT KNOW AS WELL CAN SOME ONE HELP.

Answer:

1.12x10-10 or 0.63 ewan

Explanation:

Correct option is C)

The distance of centre of mass from carbon atom is,

xcm=m1+m2m1x1+m2x2

=12+1612×0+16×1.1

=0.63A˚

Thus, the centre of mass is 0.63A˚ from carbon atom.

The distance between a carbon atom and an oxygen atom in the co molecule is 0.63

Distance is the measurement of the farness of two objects from each other.

The distance between the molecules can be calculated by the given formula

[tex]xcm = m_1+m_2m_1\times 1+m_2 \times 2[/tex]

Putting the values in the equation

[tex]xcm = 12+1612 \times 0+16 \times 1.1 = 0.63 A^\circ[/tex]

Thus, the distance between a carbon atom and an oxygen atom in the co molecule is 0.63

Learn more about distance

https://brainly.com/question/15172156

#SPJ4

Based on the equation of the reaction, the moles of chlorine gas initially in the vessel is 0.12 moles

The moles of chlorine initially present is determined using the equation of the reaction:

At STP, 1 mole of P4 reacts with 6 moles of chlorine.

Molar mass of P4 = 124.0 g

Molar mass of chlorine = 71.0 g

Mass of P4 in reaction vessel = 250 mg = 0.25g

moles of P4 in 0.25 g = 0.25/124 = 0.02 moles

0.02 moles of P4 will react with 0.02 × 6 moles of chlorine = 0.12 moles of chlorine.

Therefore, the moles of chlorine gas initially in the vessel is 0.12 moles.

Learn more about moles of a gas at: https://brainly.com/question/25417922

Assuming an ebullioscopic constant of 0.512 °C/m for the water, If you add 30.0g of salt to 3.75kg of water, the boiling-point elevation will be 0.140 °C and the boiling-point of the solution will be 100.14 °C.

Boiling-point elevation describes the phenomenon that the boiling point of a liquid will be higher when another compound is added, meaning that a solution has a higher boiling point than a pure solvent.

We will use the definition of molality.

b = mass solute / molar mass solute × kg solvent

b = 30.0 g / (58.44 g/mol) × 3.75 kg = 0.137 m

We will use the following expression.

ΔT = Kb × m × i

ΔT = 0.512 °C/m × 0.137 m × 2 = 0.140 °C

where

The normal boiling-point for water is 100 °C. The boiling-point of the solution will be:

100 °C + 0.140 °C = 100.14 °C

Assuming an ebullioscopic constant of 0.512 °C/m for the water, If you add 30.0g of salt to 3.75kg of water, the boiling-point elevation will be 0.140 °C and the boiling-point of the solution will be 100.14 °C.

Learn more about boiling-point elevation here: https://brainly.com/question/4206205

Answer:

Medication

Explanation:

These pharmaceuticals can pollute our water and unintentionally expose us to the chemicals in these medications. Recent studies have found that medicines flushed down the drain can contaminate our lakes and streams, which can hurt fish and other aquatic wildlife, and end up in our drinking water.

Answer:

GEL

Explanation:

A colloid is a type of mixture that consists of insoluble particles in another substance. Liquid dispersed in a colloidal solid is called a gel.

A gel is the dispersion of liquid molecules in a solid medium. It is a type of mixture that includes the suspension of particles in another substance. They are colloid that behaves like solid.

The liquid molecules of the medium become thick and viscous in the solid particles and form aggregates of the particles.

Therefore, colloid in which liquid is dispersed in solid is gel.

Learn more about colloid and gels here:

https://brainly.com/question/11640006

#SPJ4

Answer:

You can use a PH tester do identify the PH of each solution.  Depending on what solutions ur testing, u shouldn't mix them as for there could be either a minor or bad chemical reaction

Explanation:

Answer:

option C is the correct answer

Explanation:

it belongs to alkanes series

for alkane series the formula is

C n H 2n+2

so the formula of b utane is

C 4 H 10

The correct answer is option C.C4H10

These isomers occur because they can branch off at the carbon chain. For example, butane has two isomers, C4H10. One of them has a "linear" carbon atom and the other has a branched chain.

Butane is a 4-carbon alkane, so its molecular formula is C4H10. There are two isomers. n-Butane and isobutane. Here, n-butane is a linear compound with four carbon atoms connected by a single covalent bond.

\Compounds with the same molecular formula but different arrangements of carbon atoms in the straight or branched chain are called chain isomers. n-Butane and isobutane are chain isomers because they have different carbon atom arrangements

Learn more about  isomerism here: https://brainly.com/question/18474884

#SPJ2.

Mark the lime poor conducter of heat and electricity.

Yes why no ,Xenon is already has its secured place in modern periodic table.

Xenon is a non-reactive gas. It will not conduct and react normally. Thus it can be classified as a non-metal. Xenon is placed in the inert gas or noble gas group that is group 18.

Noble gases are inert gases in the 18th group of periodic table. Noble gases have completely filled orbitals and thus they no need other electrons.

Atoms participate in reaction when they are not stable because of the insufficient valence electrons. Noble gases such as argon, krypton, neon, xenon etc. have 8 valence electrons and thus are not reactive.

Metals are highly conductive and they are placed in the left side of periodic table. In periodic table, from left to right the metallic nature decreases and the other elements are called non-metals. Most of the non-metals are gases and very few such as silicon is metalloid.

Non-metals are insulators or poorly conduct electricity. Hence, xenon is a non-metal placed in the 18th group of periodic table.

To find more about xenon, refer the link below:

https://brainly.com/question/14524235

#SPJ2

Answer: Calcium

Hope this helps

the answer is 534.54 kelvin

Answer:

b

Explanation:

many solids are crystalline hence a is eliminated

graphite contains free electrons while diamond uses all electrons in bonding and many substances have that property hence c is eliminated

only substances made up of carbon produce carbondioxide as the product when burnt

Answer:

Photosynthesis is the process by which carbon dioxide and water are converted into oxygen and glucose. The plant consumes glucose as food, and oxygen is produced as a by-product. During cellular respiration, oxygen and glucose are converted to water and carbon dioxide. Water and carbon dioxide are by-products of the process, while ATP is the energy that is transformed. Water, carbon dioxide, and energy in the form of sunshine are all inputs in photosynthesis, and the outputs are glucose and oxygen.

Answer:

photosynthesis takes carbon dioxide from our atmosphere and turns it into oxygen.  A plant requires sunlight, water, and carbon dioxide to make both sugar and oxygen. . Input:  For photosynthesis to take place, water from the roots, carbon dioxide from the air, and energy from the sunlight are needed. Output: Photosynthesis creates glucose (sugar) used for/stored as food and releases oxygen into the air.

Explanation:

Neutralization reaction is the reaction that occur between acid and base.

Neutralization reaction is the reaction that take place between acid and base to produce salt and water. For examples HCl react with NaOH to produce NaCl and H2O

Therefore, Neutralization reaction is the reaction between acid and base.

The question is not complete but the option are gotten from another website.

Here are the options.

Learn more about neutralization from the link below.

https://brainly.com/question/4090568

Answer:

Teflon

Explanation:

Sodium hydroxide wasn't used in the synthesis of divanillyl oxalate because it's a strong base.

It should be noted that sodium hydroxide simply means a corrosive cystaline solid which readily absorbs moisture until it dissolves.

In this case, sodium hydroxide wasn't used in the synthesis of divanillyl oxalate because it's a strong base and will decrease the yield of the product.

Learn more about sodium hydroxide on:

https://brainly.com/question/27072350

Divanillyl oxalate is a chemical that is produced by triethylamine. Sodium hydroxide is not used in its synthesis as it is a strong base.

Sodium hydroxide or caustic soda is an ionic compound with ions of sodium and hydroxide. The formula is shown as, [tex]\rm NaOH[/tex]. It is crystalline and absorbs moisture from the surrounding.

It is not used in the synthesis of divanillyl oxalate as it is a strong base with pH 14 that affects the yield of the product in the reaction.

Therefore, sodium hydroxide is not used in the synthesis reaction.

Learn more about sodium hydroxide here:

https://brainly.com/question/15456619

#SPJ4

Answer:

994.56

Explanation:

41.44 multiplied by 4, that gives us a month.

Then multiply by 6.

This is because amino group of p-aminobenzoic acid is an aniline and is less electrophilic than an alkyl amine.

This is an aromatic amine which consists of a phenyl group attached to an amino group.

The amino group of p-aminobenzoic acid being an aniline makes it less electrophilic which is why an alkyl amine participates in the reaction instead.

Read more about Aniline here https://brainly.com/question/9982058

The amino group of p-aminobenzoic acid does not participate in the reaction as this is an aniline and is less electrophilic than an alkyl amine.

Aniline is an aromatic amine molecule in which phenyl group is attached with an amino group.

The amino group present in the p-aminobenzoic acid behave as an aniline as a result of which it becomes less electrophilic in nature and this is the reason why an alkyl amine participates in the reaction instead of the p-aminobenzoic acid.

Hence amino group of p-aminobenzoic acid is less electrophilic in nature and that's why not participate in the reaction.

To know more about aniline, visit the below link:
https://brainly.com/question/24316939

#SPJ4

39 g H

2

O

 contains

1.3

×

10

24

molecules H

2

O

.

Explanation:

One mole of water has a molar mass of

18.015 g/mol

and

6.022

×

10

23

molecules H

2

O

. Therefore,

1 mol H

2

O

=

18.015 g H

2

O

=

6.022

×

10

23

molecules H

2

1O

Multiply the given mass of water times the conversion factors that cancel grams and moles of water, leaving molecules of water, as demonstrated below.

39

g H

2

O

×

1

mol H

2

O

18.015

g H

2

O

×

6.022

×

10

23

molecules H

2

O

1

mol H

2

O

=

1.3

×

10

24

molecules H

2

O

39 g H

2

O

 contains

1.3

×

10

24

molecules H

2

O

.

Explanation:

One mole of water has a molar mass of

18.015 g/mol

and

6.022

×

10

23

molecules H

2

O

. Therefore,

1 mol H

2

O

=

18.015 g H

2

O

=

6.022

×

10

23

molecules H

2

1O

Multiply the given mass of water times the conversion factors that cancel grams and moles of water, leaving molecules of water, as demonstrated below.

39

g H

2

O

×

1

mol H

2

O

18.015

g H

2

O

×

6.022

×

10

23

molecules H

2

O

1

mol H

2

O

=

1.3

×

10

24

molecules H

2

O

39 g H

2

O

 contains

1.3

×

10

24

molecules H

2

O

.

Explanation:

One mole of water has a molar mass of

18.015 g/mol

and

6.022

×

10

23

molecules H

2

O

. Therefore,

1 mol H

2

O

=

18.015 g H

2

O

=

6.022

×

10

23

molecules H

2

1O

Multiply the given mass of water times the conversion factors that cancel grams and moles of water, leaving molecules of water, as demonstrated below.

39

g H

2

O

×

1

mol H

2

O

18.015

g H

2

O

×

6.022

×

10

23

molecules H

2

O

1

mol H

2

O

=

1.3

×

10

24

molecules H

2

O

For a solution to be tested in this experiment and must be buffered to pH of 10,  the [OH-] change will be, The hydroxide concentration would be higher and the formation of insoluble hydroxide salts with Mg^2 and Ca^2 would cause the determined concentration of water hardness to be too low.

Generally, the equation for the  Total hardness is mathematically given as

[tex]T=\frac{A*D*1000}{B}[/tex]

Where

[tex]D=\frac{molarity}{0.01}[/tex]

D=0.02/0.01=2

Therefore

[tex]T=\frac{A*D*1000}{B}\\\\T=\frac{20.4*2*1000}{25}[/tex]

T=1632ppm

in conclusion, The hydroxide concentration would be higher .

Read more about Concentration

https://brainly.com/question/16979235

The solution to be tested in this experiment must be buffered to a pH of 10. If the pH is high to 12, the change of [OH-] is 1632 ppm.

OH- ion is the hydroxide ion or hydroxyl ion. It is made up of a hydrogen and oxygen ion with a covalent bond.

[tex]A =\dfrac{A \times D \times 1000}{T} \\[/tex]

The buffered pH is 10

The higher pH is 12

D = molarity divided by 0.01, that is the pH

[tex]D = \dfrac{molarity }{0.01}\\\\D = \dfrac{0.02 }{0.01} = 2[/tex]

Now, putting the values in the first equation

[tex]A =\dfrac{20.4 \times 2 \times 1000}{25} = 1632 \;ppm[/tex]

Thus, the correct option is the change in hydroxide ion is 1632 ppm.

Learn more about hydroxide ion

https://brainly.com/question/14619642

#SPJ4

Answer:

The closest noble gas to silicon is Neon (Ne)

Explanation:

Electron configuration is the distribution of the electrons in atomic and molecular orbitals. The electron configuration of silicon is [Ne] 3s² 3p².

An electron configuration is the allocation of the sub-atomic particle, an electron in the orbits of the atom or the molecules. It represents the distribution of electrons around the nucleus.

The general electron configuration of silicon with atomic number 14 is [tex]\rm 1s^{2}2s^{2}2p^{6}3s^{2}3p^{2}.[/tex] The noble gas closest to silicon is neon and can be written as, [tex]\rm [Ne] 3s^{2}3p^{2}.[/tex]

Therefore, the electron configuration of silicon is [tex]\rm [Ne] 3s^{2}3p^{2}.[/tex]

Learn more about electron configuration here:

https://brainly.com/question/20567097

#SPJ4

Answer:

- Deep red fire is about 600-800° Celsius

- Answer: {1102.91}

Given: K= °C + 273.15

K = 1,376.06

Since you’re trying to find C (Celsius) you want to get C by itself in the problem. So you subtract 273.15 from that side. Anything you do to one side of the equal sign you have to do to the other side, so also subtract 273.15 from K (1,376.06).

1,376.06 - 273.15 = {1102.91°C}

Species that have a lone pair of electrons often donate electrons by resonance while substituents that are electron deficient take away electrons by resonance.

The term resonace has to do with the movement of electron pairs in a molecule. Inductive effects has to do with the drawing of electron density towards an atom or bond.

The two effects depends on the nature of a substituent. For instance, species that have a lone pair of electrons often donate electrons by resonance while substituents that are electron deficient take away electrons by resonance.

The question is incomplete hence the exact nature of the substituents can not be determined.

Learn more about resonance: https://brainly.com/question/23287285?

In resonance, the species with lone pairs donate electrons while the substituent takes electrons away from another species when deficient by resonance.

When the electron donor or the withdrawal groups creates the electron density on the molecule then it is called the inductive effect. This results in the creation of permanent dipoles in the bonds of the molecules.

Atom attached to a benzene molecule with higher electronegativity than hydrogen atom then, it will be an acceptor while with lower electronegativity will be a donor.

The movement of the electron pair like lone pair and pi bond in a molecule by the delocalization is called the resonance effect. The electron donation and acceptance depend on the nature of the substituent molecule.

If the atom attached to the benzene molecule is electron-rich, it will be a donor, while the electron-deficient will accept the electron by the method of resonance effect.

Therefore, the nature of the substituent determines the resonance and the inductive effect.

Learn more about inductive and resonance effects here:

https://brainly.com/question/21306067

#SPJ4

Answer:

Wind depositing sand to build up sand dunes.

Explanation: