in a car race along a straight race course betv,ieen Yaw and Kofi. both staried from rest but Kofi leaves the statiing line 2.00 s after Yaw does. Yav,; and Kofi maintain acceleration of 4.00 m S2 and 5.00 m S·2 respectively.​

Answer:

search it up

Explanation:

Answer:

Explanation:

overgeneralization or applying a single solution to a variety of problems without considering their unique characteristics. This is a common issue in math and other problem-solving situations where individuals may rely too heavily on past successful solutions without adjusting for the specific details of each new problem.

According to the given statement The ring's final internal diameter would be 1218 mm.

Cubical expansion is the term for the phenomenon wherein the volume of a solid increases as it is heated. Also called volumetric expansion. The coefficient of volumetric expansion measures how much a material's volume expands as its temperature rises by one degree.

The following formula can be used to get the ring's ultimate interior diameter:

ΔL = αLΔT

where ΔL is the length increase, is the cubical growth coefficient, L is the starting length, and ΔT is the temp change.

In this instance, the change in width, which is double the change in length, is what we are searching for. Thus, the formula may be rewritten as follows:

ΔD = 2αDLΔT

where D represents the starting diameter and ΔD represents the diameter change.

By putting in the indicated values, we get:

ΔD = 2(51×10⁻⁶ /degree celsius)(300 mm)(600 degree celsius)

ΔD = 918 mm

As a result, the ring's final internal diameter would be:

Dfinal = Dinitial + ΔD = 300 mm + 918 mm = 1218 mm

Hence, the ring's final internal diameter would be 1218 mm.

To know more about Cubical expansion visit:

https://brainly.com/question/4709470

#SPJ1

Finding unknown responses for statics beam and truss issues can be done by solving for the total of pressures acting in the x- and y-directions. When in balance, the total of the forces acting in each direction on each beam and truss will be equal to zero.

A beam is a long, slender structural component that can support twisting stresses by deforming transverse to its long axis. It should be noted that bending loads are imparted across the long plane.

Steel beams can have cross-sections in a variety of forms, including square, rectangle, circular, I, T, H, C, and tubular.The normal or axial force, the shearing force, and the bending moment are the three potential internal forces that may be generated when a beam or frame is exposed to transverse loadings, as shown in section k of the cantilever.

Learn more about beam in statics

https://brainly.com/question/13161665

#SPJ1

The rate at which οil is flοwing is 0.494 m³/s. This means that the prοduct οf the fluid's density (ρ), crοss-sectiοnal area (A), and velοcity (v) is cοnstant.

Density is a physical prοperty οf matter that represents hοw much mass is cοntained within a given vοlume οf a substance. It is defined as the amοunt οf mass per unit vοlume and is typically expressed in units οf kilοgrams per cubic meter (kg/m³) οr grams per cubic centimeter (g/cm³).

We can use the principle οf cοntinuity tο sοlve this prοblem. Accοrding tο this principle, the mass flοw rate οf a fluid remains cοnstant as it flοws thrοugh a pipe οf varying diameter.

Therefore, we can write:

[tex]\rho_1A_1v_1 = \rho_2A_2v_2[/tex]

where the subscripts 1 and 2 refer to the sections of the pipe before and after the constriction, respectively.

We can rearrange this equation to solve for the velocity of the oil in the pipe:

[tex]v_2 = (A_1/A_2) \times (v_1 \times (\rho_1/\rho_2))[/tex]

where A1 and A2 are the cross-sectional areas of the pipe before and after the constriction, respectively.

Using the given values, we get:

[tex]v_2 = (\pi/4) \times (1.11 m)^2 \times (8130 N/m^2 / 821 kg/m^3) / [(\pi/4) \times (0.666 m)^2] \times (6097.5 N/m^2 / 821 kg/m^3)[/tex]

v₂ = 1.74 m/s

Finally, we can calculate the rate at which oil is flowing using the formula:

Q = A₂ × v₂

Using the given values, we get:

Q = (π/4)  × (0.666 m)² × 1.74 m/s

Q = 0.494 m³/s

Learn more about Density from given link

brainly.com/question/26364788

#SPJ1

Answer:

Answer:

To find the height of the hill, we can use the conservation of energy principle, which states that the initial potential energy of the child and sled at the top of the hill is equal to their final kinetic energy at the bottom of the hill. The potential energy is given by:

PE = mgh

where m is the mass of the child and sled, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the hill.

The kinetic energy is given by:

KE = (1/2)mv^2

where v is the speed of the child and sled at the bottom of the hill.

Equating the potential and kinetic energies, we have:

mgh = (1/2)mv^2

Canceling the mass, we get:

gh = (1/2)v^2

Solving for h, we have:

h = (1/2) v^2 / g

Substituting the given values, we get:

h = (1/2) (9.94 m/s)^2 / 9.81 m/s^2

h = 5.06 m

Therefore, the height of the hill is 5.06 meters.

The intensity of sound are- For distance of 25 m: I = 0.108 W/m² and For distance of 45 m: I = 0.034 W/m².

Your comprehension of the inverse square law, which states that a sound's intensity varies inversely to the square of its distance from its source, will be put to the test in this challenge.

I = k • (1/R²)

when,  distance R is 15m ,  intensity of a sound source in open air to be 0.3 W/m².

So,

0.3 = k • (1/15²)

k = 225 * 0.3

k = 67.5

For distance of 25 m:

I = k • (1/R²)

I = 67.5 • (1/25²)

I = 0.108 W/m².

For distance of 45 m:

I = k • (1/R²)

I = 67.5 • (1/45²)

I = 0.034 W/m².

Know more about the intensity of a sound

https://brainly.com/question/17062836

#SPJ1

The power developed was 1,568 Watts, the calculation is seen in the section below.

In science and engineering, power is the rate at which work is done or energy is delivered. It can be expressed as the product of the work done (W) or the energy transferred (E) divided by the time interval (t).

Given data

We know that expression for Power is given as

Power = (Force x Distance) / Time

Substituting our data into the expression we have

Power = (112 N x 25.0 m) / 7.00 s

Power = 1,568 Watts.

Learn more about Power here:

https://brainly.com/question/11569624

#SPJ1

Answer:

The car has approximately 1.42 × 10^6 J of energy when it moves at 101 miles per hour.

Explanation:

First, we need to convert the initial velocity and kinetic energy to SI units:

Initial velocity: 32 miles per hour = 14.3 meters per second (rounded to 2 decimal places)

Kinetic energy: 5 × 10^5 J (given)

Next, we can use the formula for kinetic energy:

KE = (1/2)mv^2

where KE is the kinetic energy, m is the mass of the car, and v is the velocity of the car.

Solving for mass:

m = 2KE/v^2

Substituting the given values:

m = 2(5 × 10^5 J) / (14.3 m/s)^2 ≈ 1569.93 kg (rounded to 2 decimal places)

Now, we can use the same formula to calculate the kinetic energy of the car when it moves at 101 miles per hour (rounded to 2 decimal places):

KE = (1/2)mv^2 = (1/2)(1569.93 kg)(45.06 m/s)^2 ≈ 1.42 × 10^6 J

Therefore, the car has approximately 1.42 × 10^6 J of energy when it moves at 101 miles per hour.

originlal wire :

conductance = 0.9

conductivity = n

length = l

area = A

New wire -

conductance = ?

conductivity = n

length = l

area = 3A

Conductance of original wire :

C = (nA)/l = 0.9 s

new conductance :

C' = (n3A)/l = 3× (nA)/l = 3 × 0.9 = 2.7 s

Answer:

2.34

Explanation:

To find the position where the speed is half of its maximum speed, we can set v = v_max/2 and solve for x:

v_max/2 = ω√(A^2 - x^2)

Substituting the given values, we have:

(ωA)/2 = ω√(A^2 - x^2)

Simplifying and rearranging:

A^2 - x^2 = (A/2)^2

x^2 = A^2 - (A/2)^2

x^2 = (3.00 cm)^2 - (1.50 cm)^2

x = √(6.75 cm^2 - 2.25 cm^2)

x = √5.50 cm^2

x ≈ 2.34 cm

Therefore, the position where the speed of the particle is half of its maximum speed is approximately 2.34 cm from the equilibrium position.

The bear's total distance traveled is 21 meters and its displacement is 3 meters north.

The bear's total distance traveled is the sum of the distances covered in each leg of the journey, which is:

Total distance traveled = 9 meters + 12 meters = 21 meters

The bear's displacement is the straight-line distance between the starting point and the ending point of the journey, regardless of any intermediate stops.

Since the bear is moving only north, the displacement is simply the difference between the final and initial positions in the north direction, which is:

Displacement = 12 meters - 9 meters = 3 meters north

Therefore, the bear's total distance traveled is 21 meters and its displacement is 3 meters north.

Learn more about distance here : brainly.com/question/4931057

#SPJ1

The rocket travels a horizontal distance of 57.4 m before hitting the ground.

The initial speed of the rocket is v0=√(v0x^2+v0y^2)=7.28 m/s.

The rocket's velocity at the maximum height is zero, as it momentarily stops moving vertically and starts falling back down.

To solve this problem, we can use the kinematic equations of motion. Let's first find the velocity and position as a function of time:

vx(t) = v0x + ∫ax(t) dt = v0x + (1/3)αt^3

vy(t) = v0y + ∫ay(t) dt = v0y + βt - (1/2)γt^2

x(t) = ∫vx(t) dt = v0x t + (1/12)αt^4

y(t) = ∫vy(t) dt = v0y t + (1/2)βt^2 - (1/6)γt^3

Now, let's find the time t1 when the rocket reaches its maximum height:

ay(t1) = 0

β - γt1 = 0

t1 = β/γ = 6.43 s

At t1, the rocket's height is:

y(t1) = v0y t1 + (1/2)βt1^2 - (1/6)γt1^3

y(t1) = 7.00 m/s × 6.43 s + (1/2) × 9.00 m/s2 × (6.43 s)^2 - (1/6) × 1.40 m/s3 × (6.43 s)^3

y(t1) = 92.5 m

Now, let's find the time t2 when the rocket hits the ground. We can do this by solving for the positive root of the quadratic equation:

y(t) = 0

(1/2)γt^2 - βt - v0y = 0

Using the quadratic formula, we get:

t2 = (β + √(β^2 + 2γv0y))/γ = 8.01 s

Finally, let's find the horizontal distance traveled by the rocket:

x(t2) = v0x t2 + (1/12)αt2^4

x(t2) = 1.00 m/s × 8.01 s + (1/12) × 2.50 m/s4 × (8.01 s)^4

x(t2) = 57.4 m

Learn more about "rocket's velocity" here:

https://brainly.com/question/27797265

#SPJ1

Answer: Liquid 1 heats more slowly than 2

Explanation:

Liquid 1 heats more slowly than 2 because it has a higher specific heat.

(Hope this helps!)

Joule (J). This is the fundamental energy unit of the metric system, or the International System of Units in a later, more thorough version (SI).

The SI unit of energy, the joule (J), was created in honour of James Prescott Joule and his research on the mechanical equivalent of heat since energy is defined through labour. In terms of SI base units, 1 joule is equivalent to 1-newton metre and, in slightly more basic words.

Potential energy, which can be calculated using the formula P.E. = mgh. Unit is the energy that an object has stored due to its position and height. Joules is the SI unit for energy (J).

to know more about unit(s) here:

brainly.com/question/30391716

#SPJ1

Answer:

The net force required to bring the car to rest is 11,900 N. Since the car is slowing down, the direction of the net force must be opposite to the initial velocity. Therefore, the direction of the net force is opposite to the initial direction of the car's motion.

Explanation:

First, we need to convert the speed from km/h to m/s:

100 km/h * (1000 m/km) / (3600 s/h) = 27.78 m/s

The initial kinetic energy of the car is:

KE = (1/2) * m * v^2

KE = (1/2) * 1350 kg * (27.78 m/s)^2

KE = 535,500 J

To bring the car to a stop, the net force applied over the distance traveled must equal the initial kinetic energy. So:

work done = force * distance = KE

Rearranging this equation, we get:

force = KE / distance

Substituting the values we have, we get:

force = 535,500 J / 45 m

force = 11,900 N

The net force required to bring the car to rest is 11,900 N. Since the car is slowing down, the direction of the net force must be opposite to the initial velocity. Therefore, the direction of the net force is opposite to the initial direction of the car's motion.

Answer:

Explanation:

The 33 N force is at a 90 degree angle, whereas the 44 N force is at a 60 degree angle with the x-axis.

Assume that the third force makes a theta-angle contact with the x-axis.

Since the object is in balance, the total force acting on it will equal zero.

Find the accumulation of the x-axis forces.

[tex]\begin{aligned} 33\cos 90{}^\circ +44\cos 60{}^\circ +{{F}_{3}}\cos \theta &=0 \\ 0+22\text{ N}+{{F}_{3}}\cos \theta &=0 \\ {{F}_{3}}\cos \theta &=-22\text{ N }......\text{ }\left( 1 \right) \end{aligned}[/tex]

Find accumulation of the y-axis forces.

[tex]\begin{aligned} 33\sin 90{}^\circ +44\sin 60{}^\circ +{{F}_{3}}\sin \theta &=0 \\ 33\text{ N}+38.11\text{ N}+{{F}_{3}}\sin \theta &=0 \\ {{F}_{3}}\sin \theta &=-71.11\text{ N }......\text{ }\left( 2 \right) \end{aligned}[/tex]

Identify the magnitude.

[tex]\begin{aligned} F&=\sqrt{{{\left( {{F}_{3}}\cos \theta \right)}^{2}}+{{\left( {{F}_{3}}\sin \theta \right)}^{2}}} \\ &=\sqrt{{{\left( -22\text{ N} \right)}^{2}}+{{\left( -71.11\text{ N} \right)}^{2}}} \\ &=74.43\text{ N} \end{aligned}[/tex]

Identify the direction.

[tex]\begin{aligned} \tan \theta &=\left( \frac{{{F}_{3}}\sin \theta }{{{F}_{3}}\cos \theta } \right) \\ \theta &={{\tan }^{-1}}\left( \frac{{{F}_{3}}\sin \theta }{{{F}_{3}}\cos \theta } \right) \\ \theta &={{\tan }^{-1}}\left( \frac{-71.11\text{ N}}{-22\text{ N}} \right) \\ \theta &=72.8{}^\circ \end{aligned}[/tex]

The signboard Rahul saw was likely a speed limit sign. This sign is used to inform drivers of the maximum speed they should be travelling at in that area.

Limit is a mathematical concept that describes the highest or lowest value that a given function or expression can reach. It is used as a tool to measure how a function or expression behaves as its variables approach a certain value. For example, the limit of a function as x approaches infinity is the highest value that the function can take on. It is often used to calculate the area under a curve, the rate of change of a function, and the slope of a line at a given point. Limits are also used to compare the relative sizes of different functions, and to determine the continuity of a function.

To learn more about limit

https://brainly.com/question/14424096

#SPJ9

Answer:

Explanation:The acceleration due to gravity at a distance equal to one full Earth radius above the surface of the Earth is given by:

g' = g/(1 + R/E)^2

Where g is the acceleration due to gravity at the surface of the Earth, R is the radius of the Earth, and E is the distance of the object from the center of the Earth.

Substituting R for E+R, we get:

g' = g/[1 + (E+R)/R]^2

g' = g/[1 + (1+E/R)]^2

g' = g/[1 + (1+1)]^2 (Since E/R is very small compared to 1)

g' = g/16

Therefore, the acceleration due to gravity at a distance equal to one full Earth radius above the surface of the Earth is g/16. Answer: D. g/4.

Answer:

The acceleration of gravity decreases as you move away from the surface of the Earth. The acceleration of gravity at a height of one Earth radius above the surface can be found using the formula:

g' = (R/(R+h))^2 * g

where R is the radius of the Earth, h is the height above the surface, and g is the acceleration due to gravity at the Earth's surface.

If we plug in R = 6,371 km (the radius of the Earth) and h = 6,371 km (one Earth radius above the surface), we get:

g' = ((6,371 km)/(2*6,371 km))^2 * g

g' = (1/2)^2 * g

g' = g/4

Therefore, the answer is D. g/4.

Answer: a) 123.1m

b) 279.1m

Explanation:

The maximum height reached by the rocket is 0 meters. The rocket's greatest horizontal range beyond point A is also 0 meters.

To find the maximum height, we can use the kinematic equation for vertical motion. The rocket starts from rest, so its initial vertical velocity is 0 m/s. We can use the equation:

[tex]h = vi^2 / (2 * g)[/tex]

where h is the maximum height, vi is the initial vertical velocity, and g is the acceleration due to gravity. We can calculate h by substituting the given values:

h = (0 m/s)2 / (2 * 9.8 m/s2)

= 0 m

Therefore, the maximum height reached by the rocket is 0 meters above the ground.

To find the rocket's greatest horizontal range, we can use the horizontal motion equations. Since the rocket is subject to gravity only after leaving the incline, we need to find the time it takes for the rocket to reach the highest point on the incline. We can use the equation:

t = vf / a

where t is the time, vf is the final velocity, and a is the acceleration. We can calculate t by substituting the given values:

t = 3.50/ 3.50

= 1s

Now we can use the equation for horizontal motion to find the horizontal range:

[tex]R = v0 * t[/tex]

where R is the horizontal range and v0 is the initial horizontal velocity. Since the rocket starts from rest, v0 = 0 m/s. Therefore, the rocket's greatest horizontal range beyond point A is 0 meters.

https://brainly.com/question/12870645

#SPJ2

Radiation safety and protection, including: all the given options.

Radiation safety and protection includes various measures taken to minimize radiation exposure to individuals, the environment, and property.

Some of the key components of radiation safety and protection are:

Radiation safety and emergency measures in radiotherapy: This involves ensuring that appropriate measures are in place to minimize radiation exposure to patients, healthcare workers, and the public during radiotherapy procedures.

Compliance with local legislative and licensing requirements, code of practice and local rules: To ensure radiation safety, there are specific laws, codes of practice, and licensing requirements that must be followed by all organizations and individuals working with radiation.

Room shielding design and calculation for radiotherapy equipment and facilities: Shielding is an essential component of radiation safety and involves designing and constructing radiation-shielded rooms and facilities.

Optimization: Optimization involves using the lowest possible radiation dose necessary to achieve the desired outcome in medical procedures.

Learn more about radiation safety here: https://brainly.com/question/30972655

#SPJ1

The resultant final temperature is roughly around 61.7°C.

According to the principle of conservation of energy, a system's overall energy level is constant.

According to the question,

Let Q1 = heat that the heated olive oil has absorbed.

Let Q2= heat that the heated olive oil has released.

Q1 + Q2 = 0   {according to the energy conservation principle}

For absorption of heat by the hot olive oil

Q1 = m1 × c × ΔT1       {Q is the heat absorbed or emitted, m is the sample's mass, and c is olive oil's specific heat capacity = 4.18 J/g °C  ΔT stands for temperature change.}  

Given- M1= 200g, c= 4.18g, T=80°C

Q1 = 200 g × 4.18 J/g °C × ([tex]T_{f}[/tex] - 80°C)

For the heat released by the the warmth that the cold olive oil emits:

Q2 = m2 × c × ΔT2

Q2 = 50 g × 4.18 J/g°C × ( - 20°C)

Q1 + Q2 = 0  {on equating the equation}

200 g × 4.18 J/g °C × ([tex]T_{f}[/tex] - 80°C) + 50 g × 4.18 J/g °C × ([tex]T_{f}[/tex] - 20°C) = 0

[tex]T_{f}[/tex] = (200 g × 4.18 J/g °C × 80°C + 50 g × 4.18 J/g °C × 20°C) / (200 g × 4.18 J/g °C + 50 g × 4.18 J/g °C)

[tex]T_{f}[/tex] = 61.7°C

To know more about the the Principle of conservation of energy

https://brainly.com/question/20546287

#SPJ1

Explanation:

Weight =mass x force of gravity

Weight = 85kg x 9.8m/s²

Weight = 833N

The acceleration of mass m2 to the right is 3.125 m/s².

Let's denote the compression of the spring by x, the acceleration of m1 by a1 to the left, and the acceleration of m2 by a2 to the right.

According to Newton's second law, the force exerted on an object is equal to its mass times its acceleration:

F = ma. In this case, the forces acting on the two masses are the force of the compressed spring and the force of friction between the masses.

For mass m1, the net force is given by:

F1 = -kx - f

where k is the spring constant, x is the compression of the spring, and f is the force of friction. The negative sign in front of kx indicates that the force of the spring is acting to the left. Using Newton's second law, we have:

m1a1 = -kx - f

For mass m2, the net force is given by:

F2 = kx - f

where the force of the spring is now acting to the right. Using Newton's second law, we have:

m2a2 = kx - f

We want to find the acceleration of mass m2, which is given by a2. To do this, we need to eliminate the force of friction f from the above two equations.

To eliminate f, we can add the two equations:

m1a1 + m2a2 = -kx + kx - 2f

Simplifying and substituting the given values, we get:

(2.5 kg)(2.0 m/s²) + (1.6 kg)a2 = 0

Solving for a2, we get:

a2 = -(2.5 kg)(2.0 m/s²)/(1.6 kg) = -3.125 m/s²

Therefore, the acceleration of mass m2 to the right is 3.125 m/s².

To know more about acceleration, visit:

https://brainly.com/question/12550364

#SPJ1

Answer:

Explanation:

There are several moral theories that could be applicable to this situation, but two that stand out are consequentialism and deontology.

Consequentialism is a moral theory that focuses on the consequences of actions. According to consequentialism, an action is morally right if it leads to the best overall outcome or consequences. In this case, Youngster-A seems to be considering the potential consequences of going to the party, particularly in terms of how it could affect their lives days or weeks later. Youngster-B, on the other hand, seems to be more focused on the immediate pleasure and excitement of attending the party. From a consequentialist perspective, it would be important to consider all of the potential consequences of attending the party before making a decision.

Deontology is a moral theory that emphasizes the duty or obligation to follow certain moral rules or principles. According to deontology, some actions are inherently right or wrong, regardless of their consequences. In this case, there are several moral rules and principles that could be relevant, such as the duty to obey the law, the obligation to avoid harm to oneself or others, and the responsibility to act in a way that aligns with one's values and beliefs. From a deontological perspective, it would be important to consider how attending the party aligns with these moral rules and principles.

Both consequentialism and deontology offer different ways of approaching moral decision-making in this situation. Ultimately, the decision of whether or not to attend the party will depend on the individual's values, beliefs, and priorities, as well as the specific circumstances of the party and potential consequences.

The statement that are true on the astronaut throwing the wrench in space are:

When the astronaut throws the wrench, the wrench exerts a force on the astronaut, pushing her in the opposite direction. The velocity of the wrench will be greater because it has less mass than the astronaut and therefore can be propelled with greater velocity.

Kinetic energy is proportional to the mass and velocity of an object. Since the wrench has less mass but greater velocity than the astronaut, it will have greater kinetic energy.

Find out more on kinetic energy at https://brainly.com/question/30040674

#SPJ1

A key challenge with renewable energy is that the energy must be transported to the place where it's needed batteries or devices .

Option A is correct.

Renewable energy sources such as solar, wind, and hydroelectric power are often located far away from the areas where the energy is needed. This makes it necessary to transport the energy over long distances, which can be expensive and lead to losses due to transmission and distribution. In addition, renewable energy sources are often intermittent, meaning they don't produce a constant supply of energy.

To address this, energy storage devices are needed to store excess energy produced during peak times for use during times of low energy production. However, the current technology for energy storage is not yet efficient or cost-effective enough to meet the growing demand for renewable energy. Developing more effective energy storage devices is therefore an important area of research and development in the field of renewable energy.

To know more about renewable energy:

brainly.com/question/17373437

#SPJ1

Question incomplete:

A key challenge with renewable energy is that the energy must be transported to the place where it's needed _ or devices that store the energy needed improvement.

A. batteries

B. refineries

C. solar panels

D. wind turbines

Answer:

batteries

Explanation: