Ill give you guys brainly and 50 points please answer im struggling

Answer:

Can you give me your snap, so I can send you the foto

Answer:

2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)

General Formulas and Concepts:

Explanation:

Step 1: RxN

HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + H₂O (l)

Step 2: Balance RxN

2HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + 2H₂O (l)

Step 3: Ionic Equations

Total Ionic Equation:

2H⁺ (aq) + 2NO₃⁻ (aq) + Ca²⁺ (aq) + 2OH⁻ (aq) → Ca²⁺ (aq) + 2NO₃⁻ (aq) + 2H₂O (l)

Cancel out spectator ions.

Net Ionic Equation:

2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)

Answer:

It is A.

Explanation:

I took the test.

The Lewis structure shows the arrangement of valence electrons in H3PO4.

The Lewis structure gives us a picture of the number of valence electrons in a molecule. This is because, in a Lewis structure, the electrons in the molecule are shown as dots. A single line may be used to show shared electrons in a covalent bond.

The correct Lewis structure of H3PO4 is an upper P is single bonded above to an O, and to the left, right, and below to an O single bonded to an H. The O above the P has three pairs of dots to the left, above, and below; the O's to the sides have pairs of dots above and below, and the O below the P has pairs of dots right and left.

Learn more: https://brainly.com/question/4144781

Answer:

Gneiss forms by regional metamorphism from both high temperature and pressure. Quartzite and marble are the most commonly used metamorphic rocks.

Answer:  oxidation reactions are so fast the substance catches fire

Explanation:

Answer:

When oxidation reactions are so fast the substance catches fire

Explanation:

because i am big bwain

Answer:

AlCl₃

General Formulas and Concepts:

Explanation:

Step 1: Define

Al³⁺ and Cl¹⁻

Step 2: RxN

Al³⁺ (s) + Cl¹⁻ (g) → AlCl₃

Answer:

The answer is: AlCl₃

Hope this helped :)))

Explanation:

Answer:

option B is correct

Explanation:

momentum(p)=mv

mass= m=4 kg

velocity=v=1.5 m/s

P=4kg*1.5 m/s=6.0 kg.m/s

so option B is correct

J.J. Thomson's plum pudding model of the atom followed the discovery of negatively charged particles with a very small mass. Thus, the correct option for this question is A.

J.J. Thomson was a British physicist who discovered sub-atomic particles known as electrons within an atom. He also announced that atoms are made up of smaller components.

The plum pudding model is defined by Thomson in order to demonstrate that negatively charged sub-atomic particles known as electrons are surrounded by a volume of positively charged particles known as protons. It is one of the historical scientific model of the atom that governs all sorts of properties of sub-atomic particles.

Therefore, "negatively charged particles with a very small mass" is the discovery that follows J.J. Thomson's plum pudding model of the atom. Thus, the correct option for this question is A.

To learn more about the Plum pudding model, refer to the link:

https://brainly.com/question/4839193

#SPJ2

Answer:

Copper, a metal known since ancient times, is used in electrical cables and pennies, among other things. ... Calculate the average atomic mass of copper. ... The atomic masses of the two stable isotopes of boron 10B (19.78%) and 11B (80.22%) are 10.0129 amu ... (.1978)(10.0129 amu) + (.8022)(11.0093 amu) =10.81 amu.

Explanation:

I hope I help :)

if you just look up the answer it comes up btw!!

have a great day

Answer:

Zamir walked

27

meters and Talia walked

19

meters.

Explanation:

27 and 19

Answer:

zamir:27  Talia:19

Explanation:

i got it right on my test :)

The empirical formula : C₁₂H₁₇N₂O₄P

The empirical formula is the smallest comparison of atoms of compound =mole ratio of the components

The principle of determining empirical formula

[tex]\tt \dfrac{50.7}{12}=4.225[/tex]

[tex]\tt \dfrac{6.03}{1}=6.03[/tex]

[tex]\tt \dfrac{9.86}{14}=0.704[/tex]

[tex]\tt \dfrac{22.51}{16}=1.407[/tex]

[tex]\tt \dfrac{10.9}{31}=0.352[/tex]

Divide by the smallest mole ratio(0.352)

C : H : N : O : P

[tex]\tt C\rightarrow \dfrac{4.225}{0.352}=12[/tex]

[tex]\tt H\rightarrow \dfrac{6.03}{0.352}=17[/tex]

[tex]\tt N\rightarrow \dfrac{0.704}{0.352}=2[/tex]

[tex]\tt O\rightarrow \dfrac{1.407}{0.352}=4[/tex]

[tex]\tt P\rightarrow \dfrac{0.352}{0.352}=1[/tex]

The 12 stands for the number of electrons that fill the f orbital

In an atom there are levels of energy in the shell and sub shell  

This energy level is expressed in the form of electron configurations.  

Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d and f. The maximum number of electrons for each sub shell is  

• s: 2 electrons  

• p: 6 electrons  

• d: 10 electrons and  

• f: 14 electrons  

4f¹² :

4 : number of shell

12 : the number of electrons that fill the f orbital

Answer:

idek akxkkwskkd nwkdkekekd

Answer:

[tex]M_2=3.34x10^{-3}M[/tex]

Explanation:

Hello!

In this case, since a dilution process implies that the moles of the solute remain the same before and after the addition of diluting water, we can write:

[tex]M_1V_1=M_2V_2[/tex]

Thus, since we know the volume and concentration of the initial sample, we compute the resulting concentration as shown below:

[tex]M_2=\frac{M_2V_2}{V_1} =\frac{45.45mL*0.0404M}{550.00mL}\\\\M_2=3.34x10^{-3}M[/tex]

Best regards!

Answer:

None. Electrons are not in the nucleus.

Explanation:

We know that an atom consist of electrons, protons and neutrons. Neutrons and protons are present inside the nucleus while electrons are present out side the nucleus. Electron has a negative charge and is written as e⁻. The mass of electron is 9.10938356×10⁻³¹ Kg . While mass of proton and neutron is 1.672623×10⁻²⁷Kg and 1.674929×10⁻²⁷ Kg respectively.

Symbol of proton= P⁺  

Symbol of neutron= n⁰  

The number of electron or number of protons are called atomic number while mass number of an atom is sum of protons and neutrons. The umber of protons and electrons are always equal to make the atom electrically neutral .

The atom having atomic number 16 have 16 electrons and these electrons are present out side the nucleus.

Answer:

I think its b

Explanation:

well because thermal energy its connected to kidnetic energy

The most plausible reason why your new patient, Elisa, is feeling tired all the time is:

According to the complete question, we can see that the cells which are in Elise's body are receiving oxygen and proteins, but they are not getting enough glucose, which can be gotten from breaking down starch.

As a result of this, we can see that the best diagnoses of why Elise is always getting tired is that she has diabetes because of the inability of the body to break down starch to provide enough glucose to the body.

Read more here:

https://brainly.com/question/18470980

a. P=0.971 atm=737.6 mmHg

b. n=2.88 x 10⁻³

Dalton's law of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases

[tex]\tt P_T=P_1+P_2+..P_n[/tex]

A. vapor pressure of water at 22.5 = 20.4 mmHg

Pt=P H₂ + P H₂O

758 = P H₂ + 20.4

P H₂=737.6 mmHg=0.971 atm

B.Ideal gas Law = PV=nRT

P = 0.971 atm

V = 72 ml = 0.072 L

R = 0.082 L/atm mol

T = 22.5 + 273.15 =295.65

[tex]\tt n=\dfrac{0.971\times 0.072}{0.082\times 295.65}=2.88\times 10^{-3}[/tex]

Answer:

1234567i9812345678912121212121

Answer:

True

Explanation:

Mixtures are substances with indefinite composition. They consist of two or more elements  and or compounds in any proportion by mass.

From these properties we can clearly identify that to separate mixtures, we use the differences in the chemical properties of the constituents of the mixtures.

Answer:

Light i think

Explanation:

light is a source of energy also

Answer:

The correct option is the last option (Some dissolved solids may be nonelectrolytes)

Explanation:

Total dissolved solids (TDS) cannot be calculated by conductivity alone because conductivity involves ionic charges and there are solids that dissolve in water but do not carry ionic charges (and thus form non-electrolytes). Examples include sucrose (common sugar) and glucose. These two solids will dissolve in water but would not form ions that will carry ionic charges which are responsible for conductivity. Thus, if TDS only depends solely on conductivity, then a solution that contains dissolved sucrose will be wrongly accounted for as the sucrose will be omitted from the dissolved substances.

A valid reason why total dissolved solids (TDS) cannot be accurately

calculated by conductivity alone because some dissolved solids may be

non-electrolytes.

Conductivity means the ability of electric current to pass through a

substance and an electrolyte has a high conductivity when dissolved in

water.

Dissolved solids can't be measured by conductivity because not all

dissolved solids are electrolytes.

Read more on https://brainly.com/question/19457008

Answer:

The wavelength of the energy that needs to be absorbed  = 52.36 nm

Explanation:

For this study;

Let consider the Rydgberg equation from Bohr's theory of atomic model:

i.e.

[tex]\dfrac{1}{\lambda} = R_H (Z^*)^2( \dfrac{1}{n_1^2}-\dfrac{1}{n_2^2})[/tex]

where

Z* = effective nuclear charge of atom = Z - σ = 6

n₁ = lower orbit = 3

n₂ = higher orbit = 4

[tex]R_H[/tex] = Rydyberg constant = 1.09 × 10⁷ m⁻¹

λ = wave length of the light absorbed

∴

[tex]\dfrac{1}{\lambda} = 1.09 \times 10^7}(6)^2( \dfrac{1}{3^2}-\dfrac{1}{4^2})[/tex]

[tex]\dfrac{1}{\lambda} = 1.09 \times 10^7}(36)( \dfrac{1}{9}-\dfrac{1}{16})[/tex]

[tex]\dfrac{1}{\lambda} = 392400000\times0.0486111111[/tex]

[tex]\dfrac{1}{\lambda} =19075000[/tex]

[tex]\lambda = \dfrac{1}{19075000}[/tex]

[tex]\lambda = \dfrac{1}{1.91\times 10^7 \ m^{-1}}[/tex]

[tex]\lambda = 5.236 \times 10^{-8} m[/tex]

[tex]\lambda = 52.36 \times 10^{-9} m[/tex]

[tex]\lambda = 52.36\ n m[/tex]

Therefore, the wavelength of the energy that needs to be absorbed  = 52.36 nm

Answer:

1.B

2.A

3. B

Explanation:

1. A chemical bond is the physical phenomenon of chemical substances being held together by attraction of atoms to each other through sharing

2. so 2 is electrons of one atom are transferred permanently to another atom.meaning the answer is A

3. is When atoms combine by forming covalent bonds, the resulting collection of atoms is called a molecule. We can therefore say that a molecule is the simplest unit of a covalent compound.

A chemical bond is an attraction between two atoms.

A ionic bond is A bond formed when atoms transfer electrons.

Answer:

Microscope

Explanation:

Answer:

its a telescope you see stars or plants

Explanation:

Answer:

4 moles

Explanation:

The formula of finding moles is

moles = mass / molar mass, therefore

moles = 160 g / 40 g/mol = 4 moles