Answers
This question involves the concept of tension, centripetal force, centrifugal force, and weight.
The tension of the stone at the highest point is "0 N".
The centrifugal force always acts away from the circle. The tension always acts toward the support that is the center of the circle in this case. When the stone is at its lowest point, the centrifugal force, and the weight of the stone, both act downward. But the tension is pointing in the upward direction. Hence, the equilibrium equation will be:
[tex]Tension = Weight\ + \ Cenrifugal\ Force\\T = W + F_c\\T = 2\ W\ (given)\\2\ W = W+F_c\\F_c = 2\ W - W\\F_c = W[/tex]
Now, we consider the stone at the top position. Here, the centrifugal force will act in the upward direction (away from the center of the circle), while the weight and tension will be acting in the downward direction. Thus, the equilibrium equation, in this case, will be:
[tex]F_c = W+T\\T=F_c-W\\T = W-W\\[/tex]
T = 0 N
Learn more about tension here:
https://brainly.com/question/2287912?referrer=searchResults
The attached picture shows the free body diagram of the stone at different locations.
Related Questions
PLEASE HELP ASAPPPPPPPPPPPPPPPPPPP
Answers
Answer:
Basketball
Explanation:
Im asuming basketball because a basketball has the least movement out of the rest of the answers.
How strong is a neutron star's gravity.
Answers
Answer:
About a thousand billion times! Because neutron stars are so dense, they have intense gravitational and magnetic fields. The gravity of a neutron star is about a thousand billion times stronger than that of the Earth. Thus the surface of a neutron star is exceedingly smooth; gravity does not permit anything tall to exist.
It's crazy strong.
A grand prix racing car has an average lap speed of 180km/h.Each lap is 4.5 km. How many laps will it complete in 1.5 hours
Answers
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Lap speed = 180 km/h
Each lap is about 4.5 km
So, number of laps it will complete in 1.5 hour :
[tex] \dfrac{180}{4.5} \times 1.5[/tex][tex] \dfrac{180}{3} [/tex][tex]60 \: \: laps[/tex]draw the diagram of third class lever showing fulcrum, effort and load
Answers
Answer:
In a third class lever, the effort is located between the load and the fulcrum. If the fulcrum is closer to the load, then less effort is needed to move the load. If the fulcrum is closer to the effort, then the load will move a greater distance. ... These levers are useful for making precise movements.
Two rowboats on a lake are lined up, in contact, front to back in the same direction. A passenger in the rear boat pushes the front boat directly forward with a force of 40 N.
How much force does the front boat exert on the rear boat?
A. 0N
B. 20N
C. 40N
D. 80N
Answers
The answer is C. 40N.
31) what is the energy required to change 20g of copper, whose specific heat is 0.39j/gc,
change from 20 to 40 degrees?
Answers
Explanation:
given :
m = 20 g
sh = 0.39 J/g°C
∆T = 40-20 = 20°C
Find the Energy!
solution :
E =m. sh. ∆T
= 20 × 0.39 × 20
= 156 J
So, energy required is
Energy = mass*sh*∆T
Energy = 20g*0.39j/g°c*20°
Energy = 156joule✅
~Physics#1
What is the acceleration of a car that maintains a constant velocity of 24 m/s for 10 seconds?
a.
24 m/s2
b.
240 m/s2
c.
2.4 m/s2
d.
0 m/s2
Answers
Which area of study involves how mechanics and motion affect sports performance?
1.) Momentum. 2.) Velocity. 3.) Biomechanics. 4. )Centripetal force.
Answers
Answer:
biomechanics
Explanation:
Biomechanics is part of the larger field of kinesiology, specifically focusing on the mechanics of the movement. 1 It is both a basic and applied science, encompassing research and practical use of its findings.
Which statement best explains how a planet affects the orbit of a comet as the comet passes by the planet?
Answers
A plane moves 599 m northeast along a runway.
If the northern component of this displacement
is 89 m, how large is the eastern component?
Answers
The eastern component of the plane's displacement is 592.35 m.
The given parameters;
the resultant of the plane displacement = 599 mthe northern component of this displacement, Y = 89 mLet the eastern component of this displacement = XThe eastern component of the plane's displacement is calculated by applying Pythagoras theorem as follows;
X² + Y² = 599²
X² + 89² = 599²
X² = 599² - 89²
X² = 350880
X = √350880
X = 592.35 m
Thus, the eastern component of the plane's displacement is 592.35 m
Learn more here:https://brainly.com/question/17033407
In the free-body diagram, the magnitude of the normal force is 40 N, the friction force is
25N, the net force is 80N: What is the magnitude of the applied force?
Answers
Answer:
Explanation:
F = 80 + 25 = 105 N
If the ambient temp. is 75 F, what is it Centigrade?
Answers
Explanation:
We know
C/5 = F -32/9C/5 = 75 -32/9C/5 = 43/9C ≈ 25°CIn an electrostatic field, path 1 between points A and B is twice as long as path 2. The electrostatic work done on a negatively charged particle that moves from A to B along path 1 is W1.
How much work is done on this particle if it later goes from A to B along path 2? Express your answer in terms of W1.
W2=??
Answers
Answer:
W2 = W1
Explanation:
work is independent of the path taken between the points.
A golf ball is hit with an initial velocity of 20m/s at an angle of 30° to the horizontal. calculate;
the time of flight
Answers
Answer:
tcucugxojfjgfojcigxuogoudyifodtufukdutfuocyjxuogu
Some thermal mugs have layers of materials to keep drinks hot for as long as possible. Which combination of layers would work best for this purpose? A. Inner core of steel, no air gap, outer layer of glass B. Inner core of steel, air gap, outer layer of plastic C. inner core of steel no air gap outer layer of glass D inner core of steel no air gap outer layer of plastic
DONT ANSWER IF U DONT KNOW DO NOT GUESS THIS IS FOR A GRADE
Answers
The best combination of layers that would work best for this purpose is an inner core of steel, no air gap, and an outer layer of glass. Option A is correct.
Thermal mugs have the ability to maintain the internal body temperature and heat of their container. For the heat to be maintained for an extended period of time. The internal core must be lined with steel because it radiates less heat compared to the glass. The steel also has high conductivity and lesser specific heat to keep drinks hot for a long period of time.
Therefore, we can conclude that for thermal mugs to keep drinks hot for as long as possible, the inner core must be lined with steel, no air gap, and contain an outer layer of glass.
Learn more about thermal conductivity here:
https://brainly.com/question/7643131?referrer=searchResults
Answer:
A
Explanation:
On a hike you walk 5000 m east, 3000 m north and 1000 m west at a constant speed of 1m/s calculate your velocity
Answers
Answer:
0.44 EST + 0.33 NTH
Explanation:
if this is incorrect and brainly removes the comments to try and sabotage you guys please report this for the sake of learning
The mass of an object is 100mg. What is the object's mass in kg? Show your work
Answers
Answer:
0.0001 kg
Explanation:
The weight in Kilograms is equal to the milligrams divided by 1,000,000.
100 ÷ 1,000,000
Select the correct answer.
What does the expression “75 meters per second southeast” best describe?
A.
acceleration
B.
distance
C.
speed
D.
velocity
Answers
Answer:
my answer would be A I'm not sure about that
Answer: The answer would be D. Velocity
Explanation: Velocity is measured in meters per second.
what is the force the when does when Gravity pushes you
Answers
Answer:
Image result for what is the force the when does when Gravity pushes you
The important thing to remember is that gravity is neither a push nor a pull; what we interpret as a “force” or the acceleration due to gravity is actually the curvature of space and time — the path itself stoops downward.
Explanation:
Image result for what is the force the when does when Gravity pushes you
The important thing to remember is that gravity is neither a push nor a pull; what we interpret as a “force” or the acceleration due to gravity is actually the curvature of space and time — the path itself stoops downward.
Answer:
It is called gravitational force.
Explanation:
[tex]{ \boxed{ \rm{F = \frac{GM_{a} m _{a}}{ {r}^{2} } }}}[/tex]
F is the gravitational forceMa is the mass of a planetary bodyma is mass lf body being attractedr is the separation distanceG is the universal gravitational constant→ Assume you are in space and you have a mass of ma, and you are r metres from the Earth of mass Ma. The force F will be experienced and you will tend to be pulled towards the Earth when you are in its gravitational field.
A ball is thrown at a speed of 40m/s. If the ball has a mass of 0.33kg, what is the ball’s momentum?
Answers
Answer:63745.6573
Explanation:
TRUE OR FALSE The sun has more gravity than the earth because it is more massive.
Answers
• An artery in a certain patient has been reduced to half its original inner diameter by bad cholesterol deposits on the inner artery wall. By what factor will the blood flow through the artery be reduced if the pressure differential across the artery has remained unchanged? (a) 0.065 (b) 0.625 (c) 0.622 (d) 0.0625
Answers
Answer:
C.
Hope it's helpful
brainlest and follow me thank you
Someone pls help I don’t understand this
Answers
Answer:
[tex]{ \rm{F _{ball \: on \: bat} = - F _{bat \: on \: ball} }}[/tex]
Explanation:
• This is due to the third newtons law of motion which states that "Every action has an equal and opposite reaction".
in loading a long lorry a man lifts boxes each of weight 100N and height of 1.5M.how much energy is transfered when one box is lifted
Answers
Explanation:
energy=100×1.5=150 joules
a stone is dropped down an empty mine shaft. it takes 3 seconds to reach the bottom. assuming that the stone falls from rest and accelerates at 10m/s^2, calculate.
a) the maximum speed reached by the stone before hitting the bottom.
b) the average speed of the stone in flight.
c) the depth of the mine shaft.
Answers
Answer:
I think A. I had a similar question
Explanation:
The period of rotation of Mars is 1 day and 37 minutes. Determine its frequency of rotation in Hertz.
Answers
The frequency of rotation of Mars is 0.0000113 Hertz.
Given the following data:
Period = 1 day and 37 minutes.To find the frequency of rotation in Hertz:
First of all, we would convert the the value of period in days and minutes to seconds because the period of oscillation of a physical object is measured in seconds.
Conversion:
1 day = 24 hours
24 hours to minutes = [tex]60[/tex] × [tex]24[/tex] = [tex]1440[/tex] minutes
[tex]1440 + 37 = 1477 \; minutes[/tex]
1 minute = 60 seconds
1477 minute = X seconds
Cross-multiplying, we have:
[tex]X = 60[/tex] × [tex]1477[/tex]
X = 88620 seconds
Now, we can find the frequency of rotation of Mars by using the formula:
[tex]Frequency = \frac{1}{Period}\\\\Frequency = \frac{1}{88620}[/tex]
Frequency of rotation = 0.0000113 Hertz
Therefore, the frequency of rotation of Mars is 0.0000113 Hertz.
Read more: https://brainly.com/question/14708169
1. A 6-volt battery produces a current of 0.5 amps. What is the power in the circuit?
Answers
Answer:
hope this will help you
have a great day
Explanation:
please mark me as the brainliest
What is the Normal CSF for:
Leukocytes (per mm³)
% Neutrohils
Glucose (mg/dL)
Protein (mg/dL)
Please provide source if possible.
Answers
1. 5 WBC's per cubic millimeter.
3. 50 to 80 mg/100 mL
4. 15 to 60 milligrams per deciliter (mg/dL) or 0.15 to 0.6 milligrams per milliliter (mg/mL)
If a test were to be performed here are normal results:
Normal values typically range as follows:
Pressure: 70 to 180 mm H2O
Appearance: clear, colorless
CSF total protein: 15 to 60 mg/100 mL
Gamma globulin: 3% to 12% of the total protein
CSF glucose: 50 to 80 mg/100 mL (or greater than two thirds of blood sugar level)
CSF cell count: 0 to 5 white blood cells (all mononuclear), and no red blood cells
Chloride: 110 to 125 mEq/L
(Source: https://medlineplus.gov/ency/article/003428.htm)
!!! , ? ? ? (no silly answers please).
Answers
Answer:
hellooo
Explanation:
i think ummm
. . .
help me besties ok thx
Answers
Answer:
[tex]1 \\ 0.5 \times 500 \times 20 \times 20 \\ \ 2 \\ 0.5 \times 0.6 \times 100 \times 100 \\ 3 \\ 1000 \times 0.5 \times 10 \times 10 \\ 1000 \times 0.5 \times 20 \times 20 \\ 1000 \times 0.5 \times 30 \times 30 \\ 4 \\ 0.5 \times 40000 \times 30 \times 30 \\ 5 \\ \sqrt{ \frac{2}{0.1 \times 0.5} } [/tex]