If the kinetic and potential energies of a liter of oxygen molecules are 250 j and 1200 j, respectfully, it is likely that the liter of oxygen molecules is in a gaseous phase.
According to the passage, the kinetic and potential energies of a liter of oxygen molecules are 250 J and 1200 J, respectively. Kinetic energy is the energy of motion, and potential energy is the energy stored in an object due to its position or configuration. Therefore, it is likely that the liter of oxygen molecules is in a gaseous phase. Gases have high kinetic energy and relatively low potential energy because their molecules are in constant motion and have more distance between them, resulting in weaker intermolecular forces. It's worth noting that the kinetic energy alone is not enough to determine the phase of the substance, as it can be in any of the three states of matter (solid, liquid, and gas) and the potential energy alone is not enough as well. The phase of the substance can be determined by comparing the kinetic and potential energies, and other thermodynamic parameters such as temperature, pressure, and volume.
So, based on the given information the liter of oxygen molecules is most likely to be in gaseous phase.
To know more about oxygen please refer: https://brainly.com/question/13370320
#SPJ4
one of the reasons absorbance is so useful for chemists is because it allows us to find the concentration of a solution if we know the molar absorptivity. if the absorbance of a new blue dye solution is 0.96 what is the concentration of that solution in
Absorbance is a measure of how much light a substance absorbs and is often used by chemists to determine the concentration of a solution.
This is because the absorbance of a substance is directly proportional to its concentration, if the molar absorptivity is known. The molar absorptivity is a property of the substance and is usually provided in literature or can be determined experimentally.
In this case, if the absorbance of a new blue dye solution is 0.96 and the molar absorptivity is known, the concentration of the solution can be calculated using the Beer-Lambert Law (A = ε * b * c). This law states that the absorbance (A) of a solution is equal to the product of the molar absorptivity (ε), the path length (b) of the cuvette, and the concentration (c) of the solution.
Learn more about molar absorptivity here: brainly.com/question/28507245
#SPJ4
exercise 3.8: the right mineral for the right job in this exercise, you will indicate what physical property you think would make a mineral appropriate for the use indicated, and in some cases name a mineral that could be used for this purpose. in some instances, more than one mineral will meet the requirements and more than one property is required. part 2.a. what mineral would be a good abrasive?
A mineral that would be a good abrasive would have a high hardness and a rough or jagged surface. Examples of minerals that can be used as abrasives include diamond, corundum (which includes ruby and sapphire).
Abrasives are materials that are used to wear down or remove material from a surface by means of friction. They are commonly used in industrial applications such as sanding, grinding, and polishing. To be a good abrasive, a mineral needs to be hard and have a high Mohs hardness scale rating. Some examples of minerals that are commonly used as abrasives include diamond, corundum (aluminum oxide), and silicon carbide. Additionally, some minerals that have a distinct crystal structure, such as flint or garnet, can also be used for abrasive applications due to their sharp edges.
learn more about abrasive here:
brainly.com/question/12975792
#SPJ4
Antimony is burned in oxygen to form antimony oxide.
4 Sb + 3 O2→ 2Sb2O3
How many moles of Sb2O3 will be formed when you have 20. 0 moles of O2?
In the equation, 4 moles of antimony react with 3 moles of oxygen to form 2 moles of antimony oxide. Therefore, when 20 moles of oxygen are present,
20/3 = 6.66 moles of antimony oxide will be formed.
In the given chemical equation, for every 3 moles of oxygen (O2), 2 moles of antimony oxide (Sb2O3) are produced. Therefore, to determine the number of moles of Sb2O3 that will be formed from 20.0 moles of O2, we can use the conversion factor between moles of O2 and moles of Sb2O3. To do this, we divide the number of moles of O2 by the coefficient of O2 on the reactant side of the equation, which is 3. So 20.0 moles O2 / 3, moles O2/1 mole Sb2O3 = 6.66 moles of Sb2O3 will be formed.
Read more about Stoichiometry:
https://brainly.com/question/14935523
#SPJ4
Suppose that an electric current flows in a straight wire. The current changes so that it flows in the opposite direction. What changes occur in the magnetic field, and what stays the same?
When electric current flows in a straight wire, then it generates magnetic field around the wire. Direction of the magnetic field changes, but the strength of the magnetic field stays the same.
What changes occur in the magnetic field?If the current changes direction, then the direction of the magnetic field will also change. This is because the direction of magnetic field is determined by the direction of current flow, and when current flow is reversed, then the direction of the magnetic field will also be reversed.
The strength of the magnetic field will remain the same, assuming that current remains constant. This is because the strength of magnetic field is determined by the magnitude of the current and not its direction.
So, the direction of the magnetic field changes, but the strength of the magnetic field stays the same.
To know more about magnetic field, refer
https://brainly.com/question/14411049
#SPJ1
how much of a radioactive kind of actinium will be left after 132 years if you start with 301,184 grams and the half-life is 22 years?
A radioactive kind of the actinium will be left after 132 years if you start with 301,184 grams and the half-life is 22 years is 4706 g.
A radioactive actinium element is 301184 grams and have the half-life of 22 years :
The formula to calculate the half life is;
N(t) = N₀e⁻ˣ
N(t) = amount of substance after the time t
N₀ = initial amount of the substance
x = time
Putting the values, we get
N(t) = 301184(1/2)¹³²/₂₂
N(t) = 301184 (1/2)⁶
N(t) = 4706 g
Thus, the amount of the actinium will be left after the 132 years is 4706 g.
To learn more about half-life here
https://brainly.com/question/27633126
#SPJ4
Two identical blocks are heated to different temperatures. The blocks are placed so that they touch, and heat begins to flow between the blocks. The pair of blocks is insulated, so no energy escapes. Later, the temperature of each block is measured again. Which pair of temperatures is possible.
PLEASE HURRY.
When two items of different temperatures come into touch with one other, energy is transferred from the hotter (higher temperature) object to the colder (lower temperature) object until both objects reach the same temperature.
What is the term for when two materials that are in contact transfer heat until they achieve the same temperature?Conduction occurs when two materials or objects come into direct touch with one another. The warmer object's molecules vibrate quicker than the cooler object's. The molecules that vibrate faster clash with the molecules that vibrate slower. This causes the colder molecules to vibrate faster, warming the item.
This signifies that the substance's constituent material is a third component.
learn more about Conduction
https://brainly.com/question/893656
#SPJ1
you need to make an aqueous solution of 0.178 m silver fluoride for an experiment in lab, using a 500 ml volumetric flask. how much solid silver fluoride should you add?
You should add 0.089 mol of silver fluoride to the 500 ml volumetric flask to get the desired concentration.
To make an aqueous solution of 0.178 M silver fluoride, you need to add a certain amount of silver fluoride to a known volume of water.
Since you want to make a 500 ml solution and the desired concentration is 0.178 M, you can use the formula:
molarity = moles of solute/liters of solution
Rearranging this equation to solve for moles of solute:
moles of solute = molarity x liters of solution
Therefore, to make a 0.178 M solution, you need to add:
moles of solute = (0.178 mol/L) x (0.5 L) = 0.089 mol
So you should add 0.089 mol of silver fluoride to the 500 ml volumetric flask to get the desired concentration.
To know more about Molarity,
https://brainly.com/question/29366031
#SPJ4
Here are some last minute questions I need help with !
The balanced equations of the reaction are given below:
Overall equation: 2 H_O → H₂O₂ (l)
Equation 1: H_O ---> H_O (g)
Equation 2: H_O (g) → H₂O₂ (g)
Equation 3: H₂O₂ (g) → H₂O₂ (l)
What are balanced chemical equations?A balanced equation is an equation of a chemical reaction in which the number of moles of atoms for all the elements in the reaction is equal on both sides of the reaction.
A balanced chemical equation is obtained from the law of conservation of matter that states matter can not be created or destroyed.
Balancing chemical equations involves the addition of numerical coefficients to the reactants and products.
Learn more about balanced chemical equations at: https://brainly.com/question/11904811
#SPJ1
If 76.4 grams NH4Cl and 85 grams Ca(OH)2 are reacted together, which is the limiting reactant? (Use your answers from #1-2 to answer this question.)
CaCl2
NH3
Ca(OH)2
NH4Cl
Other:
Taking into account definition of limiting reactant, if 76.4 grams NH₄Cl and 85 grams Ca(OH)₂ are reacted together NH₄Cl is the limiting reastant.
Reaction stoichiometryIn first place, the balanced reaction is:
2 NH₄Cl + Ca(OH)₂ → 2 NH₃ + CaCl₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
NH₄Cl: 2 molesCa(OH)₂: 1 moleNH₃: 2 molesCaCl₂: 1 mole H₂O: 2 molesThe molar mass of the compounds is:
NH₄Cl: 53.45 g/moleCa(OH)₂: 74 g/moleNH₃: 17 g/moleCaCl₂: 110.9 g/moleH₂O: 18 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
NH₄Cl: 2 moles ×53.45 g/mole= 106.9 gramsCa(OH)₂: 1 mole ×74 g/mole= 74 gramsNH₃: 2 moles ×17 g/mole= 34 gramsCaCl₂: 1 mole ×110.9 g/mole= 110.9 gramsH₂O: 2 moles ×18 g/mole= 36 gramsLimiting reagentThe limiting reactant is the one that, in a chemical reaction (where there are reactants and products), ends first. If one of the substances runs out, since it is consumed during the process, the reaction will stop because the reactant limits the possibility of the reaction going ahead and therefore also limits the amount of product that is generated by the reaction.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 74 grams of Ca(OH)₂ reacts with 106.9 grams of NH₄Cl, 85 grams of Ca(OH)₂ reacts with how much mass of NH₄Cl?
mass of NH₄Cl= (85 grams of Ca(OH)₂× 106.9 grams of NH₄Cl)÷ 74 grams of Ca(OH)₂
mass of NH₄Cl= 122.79 grams
But 122.79 grams of NH₄Cl are not available, 85 grams are available. Since you have less mass than you need to react with 85 grams of Ca(OH)₂, NH₄Cl will be the limiting reagent.
Learn more about limiting reactant:
brainly.com/question/26905271
#SPJ1
a piece of cadmium with a mass of 25.95 g is submerged in 46.3 cm3 of water in a graduated cylinder. the water level increases to 49.3 cm3. the correct value for the density of cadmium from these data is:
The correct value for the density of cadmium from these data is 8.7 g/cm³
The correct answer is E.
Density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.
Mass = 25.95g
Volume of water before = 46.3 cm³
Volume of water after = 48.9 cm³
volume cadmium can be calculate as follows
Volume of Cadmium = Volume after - Volume before = 49.3 - 46.3 = 3 cm³
after we got the volume we can calculate the density as follows:
Density = Mass / Volume
Density = 25.95g / 3cm³= 8.65 g/cm³ ≈ 8.7 g/cm³
your question is incomplete but most probably your full question was attached below
learn more about density at https://brainly.com/question/13692379
#SPJ4
glucose (a monosaccharide) has the molecular formula c6h12o6. how many carbon atoms are in each glucose molecule?
Glucose (a monosaccharide) has the molecular formula c6h12o6. The number of carbon atoms are in each glucose molecule is 6 carbon atoms.
Glucose is an organic compound that forms carbohydrates with monosaccharide types and is the simplest type of carbohydrate. Glucose is a form of carbohydrate metabolism which functions as the main energy source which is controlled by insulin.
The chemical formula of glucose is C6H12O6 which means that glucose is composed of 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms. Glucose is also an aldehyde which contains -CHO groups and forms a pyranose ring which is in equilibrium with a more reactive form.
Learn more about monosaccharide at:
https://brainly.com/question/5282729
#SPJ4
if you had excess aluminum, how many moles of aluminum chloride could be produced from 37.0 g of chlorine gas, cl2 ?
0.69 moles of aluminum chloride could be produced from 37.0 g of chlorine gas (cl2).
To determine how many moles of aluminum chloride (AlCl3) can be produced from 37.0 g of chlorine gas (Cl2), you need to use the balanced equation for the reaction between aluminum and chlorine:
2 Al + 3 Cl2 -> 2 AlCl3
You know that the molar mass of chlorine is 35.5 g/mol. So you can convert 37.0 g of chlorine to moles by dividing it by the molar mass.
37.0 g Cl2 / 35.5 g/mol = 1.04 mol Cl2
Using the balanced equation, you can see that for every mole of aluminum, 3 moles of chlorine are needed to form 2 moles of aluminum chloride. Therefore, you can find the moles of aluminum chloride produced by multiplying the moles of chlorine by the coefficient of aluminum chloride in the balanced equation, which is 2.
1.04 mol Cl2 * 2 / 3 = 0.69 mol AlCl3
So, you can produce 0.69 moles of aluminum chloride from 37.0 g of chlorine gas.
You can learn more about aluminum chloride at
https://brainly.com/question/13350433
#SPJ4
Class _______ extinguishers are pressurized with non-flammable carbon dioxide gas, dry chemical, wet chemical, or clean agent/halogen
Class C extinguishers are pressurized with non-flammable carbon dioxide gas, dry chemical, wet chemical, or clean agent/halogen.
Pressurized fire extinguishers called Class C extinguishers are made to put out electrical fires. Carbon dioxide (CO₂), dry chemicals, wet chemicals, clean agents/halogens, or a combination of the four are the only possible fillers.
By replacing oxygen with CO₂, CO₂ extinguishers efficiently suffocate fires. Due to the fact that CO₂ is a non-conductive gas, they are most useful for Class C fires involving live electrical equipment.
Although CO₂ extinguishers can be used to put out Class B flammable liquid fires, they are not advised because they do not leave any residue.
The purpose of dry chemical extinguishers is to smother flames by preventing fuel from being released into the air, which stops a fire's chain reaction and stops it from spreading.
Learn more about extinguishers at
https://brainly.com/question/30026657
#SPJ4
Jim is studying growth of underwater plants in an aquarium. He notices the limiting factor on the plants is availability of light. Jim places the aquarium in a place where it will get more sunlight.
What will happen to the underwater plants?
Existing plants will become smaller, but new plants will grow.
Existing plants will grow larger, but no new plants will grow.
Existing plants will grow larger, but no new plants will grow.
Existing plants will grow larger and new plants will grow.
Existing plants will become smaller and no new plants will grow.
The thing that will happen to the underwater plants is option D: Existing plants will grow larger and new plants will grow.
What is the plant about?The existing plants in the aquarium were limited in their growth by the availability of light. By increasing the amount of sunlight the aquarium receives, the plants will now have access to more light energy, which is necessary for photosynthesis.
Therefore, This increased light energy will allow the existing plants to grow larger. Additionally, the increased light will also provide the necessary energy for new plants to grow, resulting in an increase in the overall number of plants in the aquarium.
Learn more about aquarium from
https://brainly.com/question/28889858
#SPJ1
Your Space Station launches a second probe into a new region of space and observes that shortly after launch the probe's direction changes. The crew assumes they've detected the Alien Death Moon. Describe why a change in the probe's direction causes the crew to suspect the Allen Death Moon is near.
The Alien Death Moon is an enigmatic and powerful cosmic entity that has the ability to alter the trajectories of objects in its vicinity.
What do you mean by trajectories?
Trajectories refer to the path that an object takes over a period of time. This can refer to the physical path of an object moving in space or the path of an object's energy, such as the path of sound through a speaker. Trajectories can also refer to the path of a person's life, such as the trajectory of their career or life decisions.
Its gravitational pull is so strong that it is able to redirect the paths of objects that come close to it, including the Space Station's probe. The sudden change in the probe's direction is an indication that it has been affected by the Alien Death Moon's gravitational pull, prompting the crew to suspect its presence.
To know more about trajectories,
https://brainly.com/question/88554
#SPJ1
how many br- ions are present in 1.00 moles of febr3?
3 moles br- ions are present in 1.00 moles of febr3.Br- ions: 3 x 6.0223 = 1.81 x 1024
The number of representative particles in an Avogadro mole of a material is:
1 mole is equal to 6.02 x 10^23 particles.
You may determine how many of each sort of atom there are in a typical particle by looking at a compound's chemical formula. In accordance with the formula FeBr3, one mole of FeBr3 is made up of three moles of bromide (Br-) ions in addition to one mole of iron(III) ions. Consequently, the quantity of Br- ions is
Br- ions: 3 x 6.0223 = 1.81 x 1024
A handy unit of measurement when thinking about atoms and molecules is the mole. Compounds are created when atoms join in modest whole-number ratios. For the purpose of applying mathematical relationships in computations, amounts are represented in moles since atoms of various elements have varying masses.For instance, the ratio of iron(III) ions to bromide ions in FeBr3 is the same as the ratio of iron(III) ions to bromide ions in terms of moles, but it is not the same as the ratio of the masses of the two types of ions.
complete question:How many Br- ions are present in 1.00 moles of FeBr3?a. 1.81E24b. 6.02E23c. 6.02E25d. 12.04E23
learn more about Avogadro Refer:brainly.com/question/7287712
#SPJ4
the ch resonance at d 4.0 is listed as having a ddq pattern. what is that an abbreviation for and what accounts for that observed pattern? (explain which neighbors account for the different parts of the splitting pattern
2,3-Dichloro-5,6-Dicyanobenzoquinone is abbreviation of DDQ.
A stronger oxidant than 1,4-benzoquinone, DDQ (2,3-dichloro-5,6-dicyanobenzoquinone) is employed as a reagent for oxidative couplings, cyclization processes, and the dehydrogenation of hydroaromatic compounds.
What in chemical chemistry is DDQ?
In dry conditions, the powerful oxidizing quinone DDQ is eternally stable. It is frequently used to create aromatic and,-unsaturated carbonyls from organic molecules as well as to convert activated methylene and hydroxy groups into carbonyl compounds.
Learn more about Carbonyl compounds:
brainly.com/question/13564853
#SPJ4
Hydrogen and chlorine gases combine to form hydrogen chloride gas. Write the equation. What is the limiting reagent when 18.0 g of H2 react with 40.0 g of Cl2?
Hydrogen and chlorine gases combine to form hydrogen chloride gas. The limiting reagent when 18.0 g of H₂ react with 40.0 g of Cl₂ is 638.1g Cl₂.
What do you mean by limiting reagent ?
The term limiting reagent is defined as the reactant that is completely used up in a reaction, and thus determines when the reaction stops.
The chemical equation is as follows:
H₂ + Cl₂ → 2HCl
18.0g H₂ X 1 mol H₂ / 2.0g H₂ X 1 mol Cl₂ / 1 mol H₂ X 70.9g Cl₂ / 1 mol Cl₂ = 638.1g Cl₂
Therefore, Cl₂ is our limiting reagent.
Thus, The limiting reagent when 18.0 g of H₂ react with 40.0 g of Cl₂ is 638.1g Cl₂.
To learn more about the limiting reagent, follow the link;
https://brainly.com/question/11848702
#SPJ1
Use the periodic to fill in the numbers in the electron configurations shown below.
B: 1s2 2sA2pB
A =
2
B =
1
Na: 1s22sC2pD3sE
C =
D =
E =
Answer:
B: 1s²2s²2p¹
Na: 1s²2s²2p⁶3s¹
Explanation:
A = 2
B = 1
C = 2
D = 6
E = 1
Metal- magnesium
Appearance of metal-?
Reactant- hot water
Observation of reaction-?
When mixed with hot water, it reacts to form hydrogen gas and magnesium hydroxide.
What is the observation when magnesium reacts with boiling water?Magnesium forms magnesium hydroxide and hydrogen gas when combined with heated water or steam.Hydrogen gas and magnesium hydroxide are also produced when magnesium combines with water vapor. Magnesium hydroxide and hydrogen are produced when magnesium combines with hot water.Magnesium reacts quickly with hot water, producing magnesium hydroxide and hydrogen gas. Magnesium hydroxide is weakly basic and insoluble in water. This allows it to react with the Universal Indicator to turn the solution blue or green, or react with phenolphthalein to turn the solution pink.Mg+2H2OMg(OH)2+H2 is the equilibrium equation for the reaction.Water begins to boil when the temperature exceeds 100°C. Even if the heat is released, the temperature does not rise and remains at 100°C where bubbles can be seen.To learn more about magnesium from the given link:
https://brainly.com/question/1533548
#SPJ1
what is the cytoplasm funtion
Answer:
All the chemical reaction take place in cytoplasm.Cell expansion,growth and replication occurs in cytoplasm.
If 7.12 mol of ethane (C2H6) undergoes combustion according to the unbalanced equation
C2H6 + O2 −→ CO2 + H2O,
how many moles of O2 are required?
Taking into account the reaction stoichiometry, 2.03 moles of C₂H₆ are required if 7.12 mol of ethane (C2H6) undergoes combustion.
Reaction stoichiometryThe balanced reaction is:
2 C₂H₆ + 7 O₂ → 4 CO₂ + 6 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₂H₆: 2 molesO₂: 7 molesCO₂: 4 molesH₂O: 6 molesMoles of O₂ requiredIt is possible to use a simple rule of three as follows: If by reaction stoichiometry 7 moles of O₂ react with 2 moles of C₂H₆, 7.12 moles of O₂ react with how many moles of C₂H₆?
moles of C₂H₆= (7.12 moles of O₂× 2 moles of C₂H₆)÷7 moles of O₂
moles of C₂H₆= 2.03 moles
Finally, 2.03 moles of C₂H₆ are required.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
Assignment: Balancing Chemical Equations
Balance each chemical equation.
1)
2)
3)
4)
5)
6)
7)
8)
Na3N →
H3PO4 +
N₂ +
H₂O2 →
Zn +
C₂H6+
Na +
N₂ +
KOH →
H₂ →
O₂ +
HCI →>>
0₂ →
CuCl2 + H₂S →
O₂ →>>
N₂
K3PO4 +
NH3
H₂O
ZnCl₂ +
CO₂ +
CUS +
N₂O5
H₂
H₂O
H₂O
HCI
M
It requires writing and balancing a chemical equation to extend this symbology to indicate both the identities and the relative quantities of substances experiencing a chemical (or physical) transformation.
What is balancing a chemical equation ?By the time you've finished reading this chapter, you should be able to: • Derive chemical equations from narrative accounts of chemical reactions.Create chemical equations in molecular, total ionic, and net ionic formats, and balance them.Element symbols were first used to depict individual atoms in the chapter before that. Chemical formulas are created by modifying or combining atoms' symbols in order to produce ions or molecules when atoms get or lose electrons to produce them, or when atoms join to form molecules. It requires writing and balancing a chemical equation to extend this symbology to indicate both the identities and the relative quantities of substances experiencing a chemical (or physical) transformation.As an illustration, think about the reaction that results in the production of one carbon dioxide (CO2) molecule and two water molecules from the reaction of one methane molecule (CH4) and two diatomic oxygen molecules (O2).To Learn more About balancing a chemical equation Refer To:
https://brainly.com/question/1072627
#SPJ1
Convert each given mass to number of representative particles. Identify the type of
representative particle, and express the number in scientific notation
A. 4.56*10^3 g Si
Number of particles in 4.56*10^3 g Si equals 9.78 × 10²⁵ Si atoms.
The smallest unit in which a substance naturally exists is called a representative particle. The atom is the representative particle for most elements. Iron, carbon, and helium are made up of individual iron, carbon, and helium atoms.
Given,
Mass of Si = 4.56 × 10³ g
Molar mass of Si = 28.085 g/mol
number of moles = mass × 1 mol / grams
⇒ 4.56 × 10³g Si × 1 moles / 28.085 g Si
⇒ 162.4 mol Si
Moles of Si = 162.4 mol
Number of representative particles = number of moles x [6.02 × 10²³] / 1 mol
⇒[ 162.4 mol Si x 6.02 × 10²³ Si] / 1 mol Si
= 9.78 × 10²⁵ Si atoms
To learn more about number of particles from given link
https://brainly.com/question/908857
#SPJ1
Choose one of organic compound that we always found in our daily life. State the source of the chosen compound and give its three benefits to ourselves.
One of organic compound that we always found in our daily life is acetic acid and also known as ethanoic acid. The source of the chosen compound are fruits, vegetables, and fermented products.
Sources:
The compound Acetic acid can be found in many natural sources such as in fruits, vegetables, and fermented products. It is also produced industrially through the fermentation of carbohydrates, such as glucose, by certain strains of bacteria and by chemical synthesis.
Benefits:
1. Acetic acid is used as a food preservative, as it can inhibit the growth of harmful bacteria, helping to extend the shelf life of food products.
2. Acetic acid is a key component in the production of vinegar, which is a common ingredient in cooking and salad dressings.
3. Acetic acid has been shown to have potential medicinal benefits, such as being an antimicrobial and an anti-inflammatory agent.
It is important to note that while it may have some benefits, consuming acetic acid in large amount can be harmful, and it is always advisable to follow the guidelines and instructions on the products containing acetic acid.
To know more about compound please refer: https://brainly.com/question/13516179
#SPJ4
Question 8 of 25
How many grams of NaOH will react with 507 g FeCl2 in this reaction?
FeCl₂ + 2NaOH → Fe(OH)2(s) + 2NaCl
OA. 160 g NaOH
OB. 320 g NaOH
OC. 444.25 g NaOH
OD. 1014 g NaOH
The number of grams of NaOH that will react with 507g of FeCl₂ is 320 grams.
How to calculate mass using stoichiometry?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, iron chloride reacts with sodium hydroxide to produce iron hydroxide and sodium chloride as follows:
FeCl₂ + 2NaOH → Fe(OH)₂ + 2NaCl
1 moles of FeCl₂ reacts with 2 moles of NaOH
507g of FeCl₂ is equivalent to 507g ÷ 126.751 g/mol = 4 moles
This means that 4 moles of FeCl₂ will react with 8 moles of NaOH.
Mass of NaOH = 40g/mol × 8moles = 320grams.
Learn more about stoichiometry at: https://brainly.com/question/29775083
#SPJ1
in the reaction between 1-butanol and potassium dichromate, some products are butanoic acid and the chromium(iii) cation. write and balance this redox reaction (hint, it is in acidic solution).
The balanced redox reaction for the reaction between 1-butanol and potassium dichromate in acidic solution is:
C4H9OH + K2Cr2O7 + 6H+ → C4H7O2 + 2Cr3+ + K+ + 7H2O
In this reaction, 1-butanol (C4H9OH) is oxidized to butanoic acid (C4H7O2) by potassium dichromate (K2Cr2O7) which acts as an oxidizing agent. The hydrogen ions (H+) are added to balance the acidity of the solution. Potassium ions (K+) and water molecules (H2O) are produced as byproducts. The oxidation of 1-butanol to butanoic acid is a result of the loss of electrons from the alcohol molecule, specifically from the carbon atom bearing the hydroxyl group, which leads to the formation of a carbonyl group. This process is called oxidation as it increases the oxidation state of the carbon atom from -1 to +3, and it is accompanied by a decrease in the oxidation state of the chromium ion, from +6 to +3.
learn more about oxidation here:
brainly.com/question/16976470
#SPJ4
Pls help!! “write the following metals using Roman numeral notation. Then explain why the Roman numeral differs for these metals. •Cu1+ •CoCl2
Answer:
Cu1+ can be written as "Cu+" in Roman numeral notation.
CoCl2 can be written as "CoCl2" in Roman numeral notation.
Roman numeral notation is used to indicate the oxidation state of an element in a compound. The oxidation state is the charge an atom would have if all of the bonding electrons were assigned to the more electronegative atom. The + sign shows that Copper has lost an electron and now has a positive charge.
In the case of CoCl2, the Roman numeral notation is not used since cobalt does not have variable oxidation states and therefor it does not have any change in its charge to indicate.
what is the mass of iron (in grams) contained in 98.34 g of an iron ore which is 80.00% hematite, fe2o3? (iron ore is a rock which contains a mixture of hematite and other minerals).
A mass of iron (in grammes) of 55.71 g can be found in an iron ore comprising 98.34 g and 80.00% hematite, also known as fe2o3. Hematite and other minerals combination in the rock known as iron ore.
Iron(III) oxide, also referred to as ferric oxide, is an inorganic compound having the chemical formula Fe2O3. The other two primary iron oxides (Fe3O4) are iron(II,III) oxide, which is rare, and iron(II,III) oxide. A body's mass is a key feature. It was widely believed to be connected to the volume of matter in a physical body before to the atom's discovery and the development of particle physics.
98.34 g of iron ore 80.00% of hematite
55.71g of iron are found in Fe2o3.
iron ore = 98.34 g
hematite = 80.00%
The mass of iron in Fe2o3 is 55.71g
Learn more about ferric oxide here
https://brainly.com/question/9496279
#SPJ4
an energy bar contains 26 g of carbohydrates and 5g of fat. how many calories will you obtain by eating the bar
The amount of calories that you will obtain by eating the energy bar is: 149 calories
What are calories?Calories are a unit of energy measurement that expresses the amount of energy that a food can provide to the body when the food is digested and absorbed.
To solve this problem we must perform the following algebraic operations with the given information
Information about the problem:
1 g of carbohydrates = 4 calories1 g of fat = 9 caloriesCalories (26 g carbohydrates)=?Calories (5 g of fat) =?Calories in the energy bar = ?Calculating how many calories are in 26 g carbohydrates we have:
Calories (26 g carbohydrates)= 26 * 4 calories
Calories (26 g carbohydrates)= 104 calories
Calculating how many calories are in 5 g fat we have:
Calories (5 g fat)= 5 * 9 calories
Calories (5 g fat)= 45 calories
Calculating how many calories are in the energy bar we have:
Calories (energy bar)= 104 calories + 45 calories
Calories (energy bar)= 149 calories
Learn more about calories at: brainly.com/question/830145
#SPJ4