If the heat of combustion of hydrogen gas is −285.8kJmol, how many grams of hydrogen must combust in order to release 1.2×103kJ of heat? Your answer should have two significant figures.

A substance that can act both as an acid and a base is called an amphoteric substance.

These unique compounds can donate or accept protons depending on their environment. When interacting with an acid, an amphoteric substance acts as a base, while when interacting with a base, it acts as an acid. This behavior is different from acidic bases and basic acids, which refer to weak acids and bases. Amphoteric substances play an essential role in various chemical reactions and can help maintain a stable pH level in solutions.

It's important to note that amphoteric substances are different from organic compounds, as the latter refers to carbon-based molecules, which can have various properties unrelated to acidity or basicity.

Learn more about amphoteric substance here: https://brainly.com/question/31828732

#SPJ11

The given options, option D) with 2 dots on N and 6 dots on O would be the correct electron dot structure for OCN- with a formal charge of -1 on the most electronegative atom (oxygen).

To determine the electron dot structure for OCN- with a formal charge of -1 on the most electronegative atom, we need to calculate the formal charges for each atom in the molecule.

The electron dot structure for OCN- is:

O       C       N

. .      .       .

: O : . : C : : N :

' ' ' '

: '

. '

In this structure, oxygen (O) is the most electronegative atom, so we want it to have a formal charge of -1.

To determine the electron dot structure with a formal charge of -1 on the most electronegative atom (the atom with the highest electronegativity), we need to compare the electronegativities of the atoms in the OCN- molecule.

In the OCN- molecule, we have oxygen (O), carbon (C), and nitrogen (N). Oxygen is the most electronegative atom, followed by nitrogen and then carbon.

Looking at the given options:

A) 6 dots on N & 2 on O

B) 6 dots on N & 2 on C

C) 4 dots on N & 4 on O

D) 2 dots on N & 6 on O

We want to maximize the number of dots on the oxygen atom (O) and minimize the number of dots on the nitrogen atom (N) to give oxygen a formal charge of -1. The correct option would be the one with the most dots on oxygen and the fewest dots on nitrogen.

Among the given options, option D) with 2 dots on N and 6 dots on O would be the correct electron dot structure for OCN- with a formal charge of -1 on the most electronegative atom (oxygen).

Learn more about electronegative atom here:

https://brainly.com/question/3635536

#SPJ11

Atoms are tiny, tiny pieces of matter that cannot be broken apart any further.

Atoms are the basic units of matter and the smallest particles that retain the properties of an element. Atoms are composed of a nucleus that contains protons and neutrons, surrounded by electrons that orbit around the nucleus.

Atoms cannot be broken down any further by chemical or physical means without losing their identity as the element they belong to.

The properties of atoms determine the characteristics of the matter they make up, and the arrangement of atoms in molecules determines the properties of compounds. The study of atoms and their behavior is the foundation of modern chemistry.

Visit here to learn more about Atoms:

brainly.com/question/6258301

#SPJ11

The substituent refers to the atom or group that replaces hydrogen atom or carbon.

Isomer is the structurally different compound comprising same molecular formula. Ionic is the chemical bond holding together ions. Neutral replacement requires replacement with same charge or mass depending on the context.

The correct option substituent holds property to influence the chemical characteristics and it can be an atom or functional group. The examples of substituents are carbonyl groups, halogens, hydroxyl, amino groups and others.

Learn more about substituent -

https://brainly.com/question/27310789

#SPJ4

To find the new density of the brass cylinder hanging in salt water, you can use the concept of apparent weight. Apparent weight is the weight of an object when it is submerged in a fluid, and it is equal to the actual weight minus the buoyant force.                                                                                                                                                                            

The buoyant force is the force exerted by the fluid on the object, which is equal to the weight of the displaced fluid.
So, to find the new density of the brass cylinder, you would first measure its apparent weight when it is submerged in salt water. Then, you can use the equation for apparent weight to calculate the buoyant force and subtract it from the actual weight of the brass cylinder.
Once you have the actual weight and the apparent weight, you can use the equation for density to find the new density of the brass cylinder in salt water. Density is the mass per unit volume of an object, so you would need to measure the volume of the brass cylinder as well.Buoyant force can be found by calculating the weight of the displaced saltwater volume, which is equal to the volume of the submerged brass cylinder.

Learn more about density here:
https://brainly.com/question/29775886

#SPJ11

Two molecules of water ([tex]H_2O[/tex]) are produced as the products of the reaction.  

In the chemical reaction 2[tex]H_2[/tex] + [tex]O_2[/tex] -> 2([tex]H_2O[/tex]), two molecules of hydrogen and one molecule of oxygen react to form two molecules of water.

The balanced equation for this reaction is:

2[tex]H_2[/tex] + [tex]O_2[/tex]  ----> 2([tex]H_2O[/tex])

The number of product molecules in this reaction is equal to the number of reactant molecules that are consumed in the reaction. In this case, there are two molecules of hydrogen [tex]H_2[/tex] and one molecule of oxygen in the reactant list, so two molecules of hydrogen and one molecule of oxygen are consumed in the reaction.

Therefore, two molecules of water (([tex]H_2O[/tex])) are produced as the products of the reaction.  

Learn more about molecules visit: brainly.com/question/22312099

#SPJ4

Answer:

Explanation:

Iron (Fe) is a common element that is found in the human body and is essential for the formation of red blood cells Cells are the basic building blocks of life and are found in all living organisms Air is a mixture of gases that is essential for life and contains oxygen which is required for the process of respiration

Iron (Fe) also plays a role in iron-air batteries where the power comes from the interaction of iron with oxygen. The steel oxidizes nearly exactly as it would during its corrosion phase within that procedure. The oxygen necessary for the reaction may be taken from the ambient air, eliminating the requirement for the cell to store it

You should add approximately 6.42 grams of solid magnesium chloride to prepare a 0.135 M aqueous solution in a 500 ml volumetric flask.

To make an aqueous solution of 0.135 M magnesium chloride in a 500 ml volumetric flask, you need to determine the amount of solid magnesium chloride required.

First, let's understand the relationship between molarity, moles, and volume of the solution:

Molarity (M) = Moles of solute / Volume of solution (in liters)

Since we want to prepare a 0.135 M solution, we need to determine the moles of magnesium chloride (MgCl2) required.

Moles of MgCl2 = Molarity × Volume of solution (in liters)

Volume of solution = 500 ml = 500/1000 = 0.5 liters

Moles of MgCl2 = 0.135 M × 0.5 liters = 0.0675 moles

To calculate the mass of solid magnesium chloride needed, we'll use its molar mass:

Molar mass of MgCl2 = 24.31 g/mol + 2(35.45 g/mol) = 95.21 g/mol

Mass of MgCl2 = Moles of MgCl2 × Molar mass of MgCl2

Mass of MgCl2 = 0.0675 moles × 95.21 g/mol ≈ 6.42 grams

Therefore, you should add approximately 6.42 grams of solid magnesium chloride to prepare a 0.135 M aqueous solution in a 500 ml volumetric flask.

To know more about magnesium, refer here :

https://brainly.com/question/8351050#

#SPJ11

In the given spontaneous reaction:

3Ce4+(aq) + Cr(s) → 3Ce3+(aq) + Cr3+(aq)

The process that occurs at the cathode (the electrode where reduction takes place) is:

Reduction of Ce4+(aq)

Ce4+(aq) is being reduced to Ce3+(aq) at the cathode. Reduction involves the gain of electrons, and in this reaction, Ce4+ ions are gaining electrons to form Ce3+ ions.

Therefore, the reduction of Ce4+(aq) is the process that occurs at the cathode in this galvanic cell.

To know more about spontaneous reaction refer here

brainly.com/question/31199175#

#SPJ11

To calculate the enthalpy of vaporization (ΔHvap) of acetamide using the given data, we can make use of the Clausius-Clapeyron equation: ln(P2/P1) = (-ΔHvap/R) * (1/T2 - 1/T1), Where: P1 and P2 are the vapour pressures at temperatures T1 and T2, respectively. R is the ideal gas constant (8.314 J/(mol·K)).T1 and T2 are the corresponding temperatures.

Let's use the data provided in the table:

Vapour Pressure (kPa) [Temperature (°C)]

1000         [102.8]

10.000       [150.8]

100,000      [?]

We'll use the first two data points to calculate the enthalpy of vaporization.

P1 = 1000 kPa

T1 = 102.8 °C = 376.95 K

P2 = 10.000 kPa

T2 = 150.8 °C = 424.95 K

Plugging these values into the Clausius-Clapeyron equation:

ln(10.000/1000) = (-ΔHvap/8.314) * (1/424.95 - 1/376.95)

Simplifying:

ln(0.01) = (-ΔHvap/8.314) * (0.002357 - 0.002654)

ln(0.01) = (-ΔHvap/8.314) * (-0.000297)

Solving for ΔHvap:

ΔHvap = (-8.314 * ln(0.01)) / (-0.000297)

Calculating this:

ΔHvap ≈ 281 kJ/mol

Therefore, the estimated enthalpy of vaporization of acetamide is approximately 281 kJ/mol.

Learn more about enthalpy of vaporization here ;

https://brainly.com/question/28204608

#SPJ11

The commonly used types of laboratory glassware are pipettes and funnels. The correct option is Pipettes and funnels.

Tubing is not typically considered a type of laboratory glassware.

Pipettes are used for precise measurement and transfer of liquids. They come in various forms, such as volumetric pipettes, graduated pipettes, and micropipettes, allowing for accurate dispensing of specific volumes.

Funnels, on the other hand, are used for guiding liquids or fine-grained substances into containers with small openings. They aid in controlled pouring and prevent spillage or contamination during transfers.

Therefore, the correct option is: Pipettes and funnels.

Learn more about Pipettes and funnels

brainly.com/question/32130893

#SPJ11

To determine the approximate strain energy per CH2 for cyclopropane, we need to compare its heat of combustion per CH2 with that of an acyclic alkane with the same number of carbon atoms.

Cyclopropane is a cyclic molecule, and its strain energy arises from the angle strain caused by the bond angles being forced to deviate from the ideal tetrahedral angle of 109.5 degrees.

From the given table, the heat of combustion per CH2 for various acyclic alkanes are as follows:

- Methane (CH4): 1696 kJ

- Ethane (C2H6): 686 kJ

- Propane (C3H8): 664 kJ

The heat of combustion per CH2 decreases as the size of the alkane increases.

This decrease is due to the increase in the number of available carbon-carbon single bonds, which are stronger and more stable than carbon-hydrogen bonds.

Cyclopropane, having three carbon atoms, can be compared to propane (C3H8), which also has three carbon atoms.

Since both molecules have the same number of carbon atoms, we can approximate the strain energy per CH2 for cyclopropane by comparing their heat of combustion per CH2 values.

From the table, the heat of combustion per CH2 for propane is 664 kJ. Therefore, we can approximate the strain energy per CH2 for cyclopropane as approximately 664 kJ.

The closest option in the provided choices is:

c. 110 kJ

Please note that the given options may not accurately match the calculated value.

To know more about strain energy refer here

brainly.com/question/28684254#

#SPJ11

Among the given options, (c) 100 °C and 0.5 atm would cause a gas to exhibit the least deviation from ideal gas behavior. The conditions that cause a gas to exhibit the least deviation from ideal gas behavior are high temperatures and low pressures.

This is because at high temperatures, the gas molecules have more kinetic energy and move around more rapidly, and at low pressures, the gas molecules are more spread out and experience weaker intermolecular forces.

At high pressures, the gas molecules are closer together and can interact more strongly, which can lead to deviations from ideal gas behavior. Similarly, at low temperatures, the gas molecules have less kinetic energy and move around more slowly, which can also lead to deviations from ideal gas behavior.

Learn more about ideal gas behavior: https://brainly.com/question/28535240

#SPJ11

Large crystals with well-formed crystal faces tend to form when the conditions for crystal growth are optimal. These conditions include slow cooling of a magma or solution, low concentration of impurities, and low rates of crystal growth.

When these conditions are met, atoms in the solution or magma can arrange themselves into a repeating crystal lattice structure. The slow cooling allows the atoms to arrange themselves in an orderly fashion, while low impurity concentration prevents distortion of the crystal lattice. Low rates of growth allow the crystal to develop and expand without any interference or interruption. These ideal conditions allow the crystal to form with large sizes and well-formed faces.
Large crystals with well-formed crystal faces tend to form when the cooling process of a magma or mineral-rich solution is slow and undisturbed. This allows the atoms to arrange themselves in a highly ordered, repetitive pattern, creating a crystalline structure. As more atoms join the crystal lattice, the crystal grows in size and develops its characteristic shape. The slow cooling allows ample time for the crystal to reach its full potential, resulting in large, well-formed crystals with defined faces.

To know about crystals :

https://brainly.com/question/32130991

#SPJ11

Both options a and b are correct. A phase diagram provides information about the phases present in a system at a given temperature and composition.

It shows the conditions under which different phases, such as solid, liquid, and gas, coexist or transition between each other.By examining a phase diagram, you can determine the phase or phases that exist at a specific temperature and composition. Additionally, you can determine the composition of each phase present in the system. This information is valuable for understanding the behavior of substances under different conditions and for predicting phase transitions and equilibrium conditions.

To know more about equilibrium visit :

https://brainly.com/question/14281439

#SPJ11

The primary structure of a protein is most important because the sequence of the amino acids determines its overall shape, function, and properties.                                                                                                                                                  

The primary structure is the linear sequence of amino acids that make up the protein and is crucial in determining how the protein folds into its three-dimensional structure. The sequence of amino acids also determines the protein's function and properties, such as its ability to bind to other molecules or catalyze chemical reactions. Understanding the primary structure is essential for understanding the overall structure and function of a protein.
The primary structure consists of a specific order of amino acids, which are the building blocks of proteins. This sequence dictates how the protein will fold and interact with other molecules, ultimately determining its biological function.

Learn more about amino acids here:
https://brainly.com/question/31872499

#SPJ11

All of these directly or indirectly determines the transition temperature.(option,e). The transition temperature of a lipid bilayer is influenced by multiple factors, all of which are listed options.

The ability of lipid molecules to be packed together plays a crucial role in determining the transition temperature.

Lipid molecules with shorter fatty acid chains are more fluid and have lower transition temperatures compared to those with longer chains, as shorter chains allow for increased mobility and reduced packing.

The saturation level of fatty acid chains also affects the transition temperature. Saturated chains pack tightly, leading to higher transition temperatures, while unsaturated chains, with double bonds, introduce kinks that disrupt packing, resulting in lower transition temperatures.

The extent of double bonds in the fatty acid chains affects the fluidity of the lipid bilayer. More double bonds introduce greater fluidity and lower transition temperatures.

Therefore, all of these factors contribute to the determination of the transition temperature, highlighting the complex interplay between lipid structure and membrane properties.

To know more about bilayer refer here:

brainly.com/question/350407#

#SPJ11

At a temperature approximately 4.41 Kelvin, 4.51 moles of F2 gas would have a pressure of 248 Torr in a 5.00 L tank.

The Ideal gas law states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.

It is expressed as;

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK ).

Given that:

Amount of gas n = 4.51 mol

Pressure P = 248 Torr = 248/760 atm = 31/95 atm

Volume of the gas V = 5.00 L

Temperature T = ?

Plug these values into the above formula and solve for temperature:

[tex]PV = nRT\\\\T = \frac{PV}{nR} \\\\T = \frac{\frac{31}{95}\ * \ 5 }{4.51 \ * \ 0.08206 } \\\\T = 4.41 \ K[/tex]

Therefore, the temperature of the gas is approximately 4.41 Kelvin.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

To determine the molar solubility of nickel(II) hydroxide (Ni(OH)2) in 0.20 M NaOH at 25 degrees Celsius, we need to consider the effect of the added NaOH on the solubility equilibrium.

The solubility of nickel(II) hydroxide can be represented by the following equilibrium equation:

Ni(OH)2 (s) ⇌ Ni2+ (aq) + 2OH- (aq)

The solubility product expression for this equilibrium is given as:

Ksp = [Ni2+] [OH-]^2

Given that the molar solubility of nickel(II) hydroxide in pure water is 4.1 x 10^-6 mol/L, we can represent this as:

[Ni2+] = x

[OH-] = 2x

Substituting these expressions into the solubility product expression, we have:

Ksp = (x) (2x)^2 = 4x^3

At equilibrium, the value of Ksp remains constant regardless of the presence of other ions. Therefore, the value of Ksp in pure water is equal to the value of Ksp in the presence of NaOH.

Now, we can consider the effect of adding 0.20 M NaOH. NaOH dissociates in water to form Na+ and OH- ions. The concentration of OH- ions contributed by the NaOH is 0.20 M.

To account for the contribution of OH- ions from NaOH, we add this concentration to the concentration of OH- derived from the nickel(II) hydroxide dissolution. Therefore, the concentration of OH- ions in the equilibrium expression becomes 2x + 0.20.

Now we can set up the equilibrium expression:

Ksp = (x) (2x + 0.20)^2

Substituting the value of Ksp (which remains constant) and solving for x, we can find the molar solubility of nickel(II) hydroxide in 0.20 M NaOH.

Learn more about molar solubility here ;

https://brainly.com/question/3191940

#SPJ11

There are 6 attomoles of epinephrine in each vesicle.

The number of molecules per vesicle is 3.613 * 10¹⁵ molecules

The volume of the vesicle is 3.35 * 10⁻¹⁸ m³ or 3.35 * 10⁻¹⁵ L

The molar concentration of epinephrine in the vesicle is 2.99 M.

The number of attomoles of epinephrine in each vesicle is determined as follows:

Number of attomoles per vesicle = (150 fmol / 2.5 x 10⁴) / 10⁹

Number of attomoles per vesicle = 6 amol

(b) To find the number of molecules of epinephrine in each vesicle is determined as follows:

Molecular weight of epinephrine = 183.2 g/mol

Based on Avogadro's number:

1 mole of epinephrine = 6.022 * 10²³ molecules

1 amol of epinephrine = 6.022 * 10¹⁴ molecules

Number of molecules per vesicle = 6 * 6.022 * 10¹⁴

Number of molecules per vesicle = 3.613 * 10¹⁵ molecules

(c) The volume of a vesicle with radius r is:

r = 200 nm or 2 * 10⁻⁷ m, we get:

V = (4/3) * π * (2 * 10⁻⁷)³

V = 3.35 * 10⁻¹⁸ m³

Converting to liters:

1 L = 10⁻³ m³

The volume of the vesicle in liters will be:

V = 3.35 * 10⁻¹⁸ m³ * (1 / 10⁻³)

V = 3.35 * 10⁻¹⁵ L

(d) The molar concentration of epinephrine in the vesicle is determined using the formula below:

Molar concentration = 10 amol / 3.35 * 10⁻¹⁸ m³

Converting amol to mol:

Molar concentration = 10 * 10⁻¹⁸ mol / 3.35 * 10⁻¹⁸ m³

Molar concentration = 2.99 M

Learn more about molar concentration at: https://brainly.com/question/26255204

#SPJ1

To solve this problem, we can use the first law of thermodynamics:ΔU = Q - W, where ΔU is the change in internal energy, Q is the heat transferred, and W is the work done on the gas.

Given information:

n = 3.65 mol (number of moles)

V₁ = 0.1210 m³ (initial volume)

V₂ = 0.750 m³ (final volume)

P₁ = 1.00 atm (initial pressure)

To find the initial and final temperatures, we can use the ideal gas law:

P₁V₁ = nRT₁  [Initial state]

P₂V₂ = nRT₂  [Final state]

where R is the ideal gas constant.

Rearranging the equations to solve for temperature:

T₁ = P₁V₁ / (nR)

T₂ = P₂V₂ / (nR)

Substituting the given values, we get:

T₁ = (1.00 atm)(0.1210 m³) / (3.65 mol)(R)

T₂ = (1.00 atm)(0.750 m³) / (3.65 mol)(R)

The change in internal energy (ΔU) can be calculated using the equation:

ΔU = (3/2)nR(T₂ - T₁)

Substitute the known values to calculate ΔU.

The heat lost by the gas (Q) in an adiabatic process is zero because there is no heat transfer.

Q = 0

The work done on the gas (W) can be calculated using the equation:

W = ΔU - Q

Learn more about change in internal energy here ;

https://brainly.com/question/31808835

#SPJ11

There are only two stereoisomers of 3-chloro-2-methylbutane: (R)-3-chloro-2-methylbutane and (S)-3-chloro-2-methylbutane.

The given compound, (CH3)2CHCHClCH3, is a chiral molecule because it has a stereogenic center (the carbon atom bonded to four different groups). Therefore, it can exist in two stereoisomeric forms: the enantiomer that is the mirror image of the molecule and the original molecule itself.

To determine if there are any additional stereoisomers, we can examine whether there are any other stereogenic centers in the molecule.

However, we can see that there are no other carbon atoms with four different groups bonded to them. Therefore, there are only two stereoisomers of 3-chloro-2-methylbutane: (R)-3-chloro-2-methylbutane and (S)-3-chloro-2-methylbutane.

To know more about stereoisomers , refer here:

https://brainly.com/question/31862213#

#SPJ11

The movement of many Northern Hemisphere species toward the north can be explained by several factors, including climate change and habitat availability.

One significant driver behind species' movement northward is the impact of climate change. Rising temperatures and changing weather patterns have led to shifts in ecosystems and altered the distribution of suitable habitats. As temperatures warm, species may migrate to higher latitudes or elevations where conditions are more favorable for their survival and reproduction.

Another factor influencing species movement is the alteration of seasonal patterns. With warmer winters and earlier springs in some regions, species that were traditionally adapted to colder climates may find it advantageous to move northward to maintain synchronization with their preferred environmental cues. This allows them to time their life cycle events, such as breeding or migration, more effectively.

Learn more about ecosystem on:

https://brainly.com/question/31459119

#SPJ1

Among the given radicals, R3C is the most stable radical, while CH3 is the least stable radical.

Stability of radicals is influenced by factors such as electron delocalization, hyperconjugation, and steric hindrance. In this case, R3C (tertiary radical) is the most stable radical due to the presence of three alkyl groups attached to the carbon atom. The alkyl groups provide electron-donating inductive effects and allow for efficient electron delocalization, which stabilizes the radical.

On the other hand, CH3 (methyl radical) is the least stable radical. It has only one alkyl group attached to the carbon atom, limiting the electron-donating inductive effects and electron delocalization. As a result, the methyl radical is less stable compared to the other radicals provided.

RCH2 (secondary radical) and R2CH (primary radical) have intermediate stability between R3C and CH3. The number of alkyl groups attached to the carbon atom affects the stability, with more alkyl groups providing greater stabilization through electron delocalization.

Therefore, among the given radicals, R3C is the most stable radical, while CH3 is the least stable radical.

Learn more about radicals here:

https://brainly.com/question/28851005

#SPJ11

The change in specific entropy from inlet to exit is 3.567 kJ/kg·K.

To determine the power developed by the turbine, we can use the steady-state energy equation:

Power developed by the turbine (W) = H₁ - H₂,

where H₁ and H₂ are the specific enthalpies at the inlet and exit of the turbine, respectively.

To calculate the change in specific entropy, we can use the entropy equation:

Change in specific entropy (Δs) = S₂ - S₁,

where S₁ and S₂ are the specific entropies at the inlet and exit of the turbine, respectively.

First, we need to determine the specific enthalpies at the inlet and exit. We can use steam tables or steam property software to obtain the values. For simplicity, I will provide the results using steam tables at 1.25 MPa (saturation pressure).

At 1.25 MPa:

The specific enthalpy of saturated liquid (hf) is 762.74 kJ/kg.

The specific enthalpy of saturated vapor (hg) is 2764.9 kJ/kg.

Given that the steam exits with a quality of 83%, we can calculate the specific enthalpy at the exit:

H₂= hf + x * (hg - hf),

where x is the quality of the steam.

H₂ = 762.74 + 0.83 * (2764.9 - 762.74) = 2480.6 kJ/kg.

Next, we can calculate the specific entropy at the inlet and exit using the steam tables:

At 1.25 MPa:

The specific entropy of saturated liquid (sf) is 2.531 kJ/kg·K.

The specific entropy of saturated vapor (sg) is 7.359 kJ/kg·K.

S1 = sf = 2.531 kJ/kg·K.

At the exit, since the quality is given, we can use the entropy of the mixture formula:

S₂ = sf + x * (sg - sf),

where x is the quality of the steam.

S₂ = 2.531 + 0.83 * (7.359 - 2.531) = 6.098 kJ/kg·K.

Now we can calculate the power developed by the turbine:

W = H₁ - H₂ = hg - H₂,

where hg is the specific enthalpy of saturated vapor.

W = 2764.9 - 2480.6 = 284.3 kJ/kg.

Therefore, the power developed by the turbine is 284.3 kJ/kg of steam flowing.

The change in specific entropy is:

Δs = S₂ - S₁ = 6.098 - 2.531 = 3.567 kJ/kg·K.

To know more about entropy refer here:

https://brainly.com/question/32167470#

#SPJ11

Answer:

The formula to calculate the number of liters of a solution is:

(volume of solution) = (amount of solute) / (molarity)

where

(amount of solute) = 2.5 moles

(molarity) = 2.0 M

Plugging in the values:

(volume of solution) = (2.5 moles) / (2.0 M)

(volume of solution) = 1.25 L

Therefore, 1.25 liters of solution can be produced from 2.5 moles of solute if a 2.0M solution is needed.

Angiotensin -I (A-I) is a peptide hormone that is produced from the proteolytic action of renin on angiotensinogen. In order for A-I to become its active form, angiotensin -II (A-II), it must be subjected to the action of an enzyme known as angiotensin -converting enzyme (ACE).

Correct option is A.

ACE is a dipeptidyl carboxypeptidase that cleaves the terminal dipeptide from A-I, leaving the active form of A-II. This process is important because A-II is a potent vasoconstrictor that also stimulates aldosterone secretion from the adrenal cortex.

Aldosterone helps to regulate sodium and water balance in the body, and thus A-II plays a key role in maintaining normal blood pressure and fluid balance in the body. Therefore, ACE is necessary for the transformation of A-I into A-II, and without it the body would be unable to produce the active form of the hormone.

Correct option is A.

know more about Angiotensin here

https://brainly.com/question/30403925#

#SPJ11

Based on Lewis structures, the ordering of N-O bond lengths is NO+ < NO2- < NO3-.

In Lewis structures, the number of electron pairs around the central atom can affect the bond lengths. The more electron pairs there are, the greater the repulsion between them, which can lead to longer bond lengths.

In NO+, there are two electron pairs around the central nitrogen atom, resulting in a linear structure. The N-O bond length in NO+ is shorter compared to the other two molecules.

In NO2-, there are three electron pairs around the central nitrogen atom, resulting in a bent structure. The presence of an additional lone pair increases the electron-electron repulsion, leading to longer N-O bond lengths compared to NO+.

In NO3-, there are four electron pairs around the central nitrogen atom, resulting in a trigonal planar structure. The presence of two additional lone pairs further increases the repulsion, resulting in the longest N-O bond lengths among the three molecules.

Based on Lewis structures, the ordering of N-O bond lengths is NO+ < NO2- < NO3-.

To know more about Lewis, visit:

https://brainly.com/question/20300458

#SPJ11

Richard Feynman, Peter Debye, and Sir James Black shared a commonality in their approach to scientific work, characterized by curiosity, creativity, and the pursuit of innovative solutions.

Richard Feynman, Peter Debye, and Sir James Black were renowned Nobel Prize-winning scientists who possessed similar traits in their approach to scientific work. They all exhibited a strong sense of curiosity, constantly questioning existing theories and seeking deeper understanding.

Their creativity played a crucial role in their scientific endeavors, as they often approached problems from unconventional angles, leading to breakthrough discoveries. Moreover, these scientists were driven by a shared pursuit of innovative solutions, constantly pushing the boundaries of their respective fields.

Their dedication to advancing knowledge and their willingness to challenge the status quo highlight their common approach to scientific thinking, characterized by intellectual curiosity, creative problem-solving, and a commitment to groundbreaking research.

For more questions like Richard Feynman click the link below:

https://brainly.com/question/30194130

#SPJ11

The total pressure in the container is 49.3 atmospheres .

So, the correct answer is C.

The total pressure of a container can be calculated using the Ideal Gas Law:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

For a 10.0 L container with 10 moles of nitrogen gas and 10 moles of oxygen gas at 300 K, the total moles (n) is 20 moles.

Using the Ideal Gas Law:

P(10.0 L) = (20 mol)(0.0821 L atm/mol K)(300 K).

Solving for P, we get P = 49.3 atm.

Hence, the answer of the question is C.

Learn more about ideal gas law at https://brainly.com/question/20212888

#SPJ11