If light from one star is 40 times brighter (has 40 times more flux) than light from another star, what is their difference in magnitudes?

The additional charge that flows to the positive plate from the 8 Volts battery is  12 x 10⁻³ Coulomb's.

We have an uncharged capacitor which is charged in two different ways using battery of two different voltages. Firstly, it is connected to the terminals of a 4.0 V battery, and 12 μc of charge flows to the positive plate. Then, the 4.0 V battery is disconnected and replaced with a 8.0 V battery

We have to determine the Additional charge that flows to the Positive plate from this 8 V battery.

Capacitance is the ability of an object to collect and store energy in the form of an electrical charge. Mathematically -

C = Q/V

According to the question, we have -

Electric potential of battery 1 = V[1] = 4 V

Charge flow from battery 1 to the positive plate = Q[1] = 12 x 10⁻³ C

Electric potential of battery 2 = V[2] = 8 V

Now, using the following relation, we will find Q[2] {Charge flow from battery 2 to the positive plate} →

V[1] / V[2] = Q[1] / Q[2]

Substituting the values -

Q[2] = (12 x 10⁻³ x 8)/4 = 24 x 10⁻³ C

Additional Charge that flowed to the positive plate →

Q[2] - Q[1] = 12 x 10⁻³ Coulomb's

Hence, the additional charge that flows to the positive plate is  [tex]12\times 10^{-3}[/tex] Coulomb's.

To solve more questions on Capacitance, visit the link below-

https://brainly.com/question/16887022

#SPJ4

[ The question given is incomplete, the complete question is -

"An uncharged capacitor is connected to the terminals of a 4.0 v battery,  and 12 μc flows to the positive plate. the 4.0 v battery is then disconnected and replaced with a 8.0 v battery, with the positive and negative terminals connected in the same manner as before. How much additional charge flows to the positive plate" ]

The correct answer is 29883.3m/s

The pace at w.hich an object's position changes in relation to a frame of reference is known as its velocity, which is a time-dependent quantity. The speed and direction of an object's motion are its velocity. The rate at which an object's velocity changes in relation to time is defined as its acceleration.

The following kinematic equation can be used to connect velocity and acceleration:

v_1=v_0+at

Where v_1 denotes the ultimate velocity, v_0 denotes the starting velocity, a denotes the acceleration, and t is the passing of time.

Calculate the length of the Earth's orbit around the Sun to get started. For this issue, a circle rather than an ellipse can be used to represent the Earth's orbit.

Circumference = C=πD=2πR

=2π(1.5×10km)

=9.424π×10^8

Do a dimensional analysis to convert the speed of the Earth around the Sun from miles per hour to metres per second:

s_earth= 9.424π×10^8/1year × (1year×100m×1day×1hour×1min)/(1km×365days×24hours×3600seconds)

=29883.3m/s

To learn more about Earth's orbit refer the link:

https://brainly.com/question/11046519

#SPJ4

Low-energy state of condensed matter is characterized by structural rigidity and resistance to changes of shape or volume is solid.

When particles are arranged and packed closely -- compared to those in a gas or liquid -- and are relatively stable, they are considered to be in solid state. Solids tend to have a rigid shape, as the atoms or molecules of matter in the solid state are generally compressed and tightly connected through the chemical bonds. These bonds can produce an amorphous shape or regular lattice.

In electronics, the solid state refers to components and systems based entirely on semiconductor materials, such as silicon, germanium or gallium arsenide. Transistors and diodes -- the most common solid-state devices -- are often combined with resistors, capacitors and other components to create the integrated circuits (ICs). All the electronic systems incorporate ICs and, therefore, transistors.

The particles that make up solid have the lowest energy, and vibrate in place. This results in the characteristics of a solid, such as definite shape and volume. A solid is actually the frozen state of matter for substance. A substance does not have to freeze at cold temperature. For example, the faucet you have at your lab station in chemistry, and the faucets in your home are frozen the stainless steel; and so is your desk, pencils, pens, cell phones, and computers are all frozen. In fact anything solid is frozen.

To know more about transistor visit: brainly.com/question/23822494

#SPJ4

The amount of heat this resistor gives in 24 hours and heat fiux q is mathematically given as

Qd=4340.589 W/m^2

Q_t amp;=Q*time

amp;=1.2 *J*(24*3600)

Q_damp=03680J

Q_damp;=103.680

[tex]A_s &=\frac{\pi}{4} d^2 \times 2+\pi d L \\\\A &=\frac{\pi}{4} \times 0.4^2 \times 2+\pi \times 0.4 \times 2[/tex]

A amp;=2.764601 cm^2

[tex]\\\q &=\frac{1.2 \times 104^{+}}{2.764601}=4340.589(\mathrm{~W} / \mathrm{m})[/tex]

qamp;=4340.589mm^2

In conclusion,

Qd=103.680Jq

Qd=4340.589 W/m^2

Read more about heat fiux

https://brainly.com/question/7544063

#SPJ4

The distance of Uranus from the Sun in astronomical units is 9.13 AU.

What is astronomical unit?

In our solar system, distances are really great. Therefore, astronomers frequently avoid using miles or kilometers when describing the distances to planets, asteroids, comets, or spacecraft. They substitute astronomical units, or AU, which represent the typical separation of the Earth from the sun. That translates to around 93 million miles, 150 million kilometers, or 8 light-minutes.

By above definition, we can say that

1 astronomical unit (AU) = 150 million kilometers (km)

In order to find the distance in astronomical units multiply the given distance expressed in kilometers of Uranus, which is 2870 million kilometers, by the unit ratio, 1 AU per 150 million kilometers, as shown on the expression:

[tex](2870 million Km)(\frac{1Au}{150millionKm})[/tex]

Therefore, the distance of Uranus from the Sun is 19.13 AU.

To know more about astronomical units, go to URL

https://brainly.com/question/13220628

#SPJ4

​

When Tron accelerates vertically upward, traveling 4.50 m in the first 3.00 ms after it is released. Then magnitude of the electric field is E= 3.4893 N/C.

The electric force per unit charge is referred to as the "electric field." It is thought that the field's direction corresponds to the force it would apply to a positive test charge.

The SI unit for the electrical field is volts per meter (V/m). This unit is equivalent to the Newtons per coulomb. Both Newton, which represents for force, and Coulomb, which stands for charge, are the ancestors of these units.

Around a charged object, an electric field is produced that affects the surrounding environment.

To learn more about electric field from the given link:

brainly.com/question/15800304

#SPJ4

The electric fields is always directed from higher potential to the lower potential.

The electric fields always aiming from the region of higher potential to the region of lower potential. So the force of electrostatic and the direction of the travel of electrons will be always from lower potential to the region of higher potential.

An electric field is defined as the physical field which covers the electrically charged particles and also they can apply force on all other charged particles.

So we can conclude that the electric fields is always directed from higher potential to the lower potential.

Learn more about Electric Field here: https://brainly.com/question/26199225

#SPJ1

The position of a particle undergoing simple harmonic motion is given by:

x = 2 cos (50t).

The maximum velocity is 100 m/s.

What is meant by Simple Harmonic Motion, refer to:

To learn more about Simple harmonic motion, refer to:

brainly.com/question/28208332

#SPJ4

Light is emitted, energy is  9.16 × [tex]10^{-20}[/tex] J , frequency is 1.38 × [tex]10^{-14}[/tex] [tex]s^-[/tex]    

and wavelength is  2.17 × [tex]10^{-6}[/tex] m      

n = 7 → n = 4

higher → lower

Light is emitted

[tex]\Delta[/tex]E = [tex]\frac{-13.6}{7^2} - (\frac{-13.6}{4^2})[/tex]

[tex]\Delta[/tex]E = 0.85 - 0.277

     = 0.572 eV

[tex]\Delta[/tex]E = 9.16 × [tex]10^{-20}[/tex] J              -> [energy calculated]

[tex]\Delta[/tex]E = hv           (h is Planck's constant and v is frequency)

v = [tex]\frac{\Delta E}{h}[/tex]  = [tex]\frac{9.16 * 10^{-20}}{6.626 * 10^{-39}}[/tex]

v = 1.38 × [tex]10^{-14}[/tex] [tex]s^-[/tex]                 ->[frequency calculated]

[tex]\Delta[/tex]E = [tex]\frac{hc}{\Lambda}[/tex]            (c is speed of light)

[tex]\Lambda[/tex] = [tex]\frac{hc}{\Delta E}[/tex]

[tex]\Lambda[/tex] = [tex]\frac{6.626 * 10^{-34} . 3*10^8 m/s}{9.16 *10^{-20 J} }[/tex]

[tex]\Lambda[/tex] = 2.17 × [tex]10^{-6}[/tex] m                    ->[wavelength calculated]

Energy, according to scientists, is the capacity for work. The ability to transform energy from one form to another and use it to perform tasks is what makes modern civilization possible. People utilize energy to travel by foot and bicycle, drive vehicles on land and in water, prepare meals on stoves, create ice in freezers, illuminate our homes and workplaces, create goods, and launch people into space.

Energy comes in a wide variety of forms, including:

These energies can be divided into two categories for working energy:

Learn more about energy

https://brainly.com/question/13881533

#SPJ4

Answer:

1,188.25 J

Explanation:

PE= mgh

PE=(97)(9.8)(1.25)

PE= 1,188.25 J

Answer:

a = (v2 - v1) / t

If the velocity is changing but not the magnitude of speed then

the change in velocity is directed perpendicular to the current velocity of the object

(An example is an object undergoing uniform circular motion where the speed of the object around the circle is constant but the change in velocity is always directed toward the center of rotation)

The pig is moving slower in the negative direction during the next 2 seconds.

The term acceleration refers to the change in the velocity of the object with time. Now we know that velocity is a vector quantity. This implies that we have to take the magnitude and the direction into focus when we are discussing about the velocity.

Similarly, the acceleration is a vector quantity and the magnitude and the direction must also be taken into account when dealing with the acceleration.

In this case, it is clear that a  pig on roller skates is moving with an initial velocity of -10 m/s and is accelerating at a rate of 2m/s/s.

Seeing that the velocity is negative, we can see that the pig roller coaster is moving the negative direction. Recall that the axes must be defined such that one is negative and one is positive.

Having said that, we can conclude that; the pig is moving slower in the negative direction during the next 2 seconds.

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1

University physics with modern physics and mastering physics access code (15th edition), by h. young and r. freedman.

Learn more about Physics https://brainly.com/question/14338730

#SPJ4

The statement is false, that the greatest magnification on the compound light microscope can be achieved by the use of the high-power objective lens.

A microscope with numerous lenses and its own light source is referred to as a compound light microscope. In this type of microscope, the rotating nosepiece is positioned closer to the specimen and contains the objective lenses, while the binocular eyepieces house the ocular lenses.

The compound binocular microscope is now more often utilized, even though it can occasionally be found as monocular with only one ocular lens.

Zacharias Jansen's 1595 invention of the compound microscope with collapsible tubes and a 9X magnification produced the first light microscope.

Since then, microscopes have advanced significantly; the strongest compound microscopes available today have magnifications of 1,000 to 2,000X.

Hence, the statement is false that it can be achieved by using the high power objective lens.

To get more information about Compound Light Microscope :

https://brainly.com/question/13174279

#SPJ4

The pivot point should be placed 15m right from the 4kg board and 60m left from 1kg block to be balanced.

Let d block be x and d board be y      

so, x + y = 75   ...1

This problem needs to add torques about the pivot point. In order to be balanced, the torque must be equal on each side of the pivot point.

T block =T board

Use the equation for torque in this equation.

(F block)(d block )=(F board )(d board )

The force of each object will be equal to the force of gravity.

(m block )g(d block )=(m board )g(d board )

Gravity is cancelled from each side of the equation. for simplicity.

(m block )(d block )=(m board )(d board )

⇒ 1 kg × x = 4kg × y

⇒ 1/4  = x/y    

⇒ x = 4y     ...2

Now applying eq 2 in eq 1 we get

⇒ 4y + y = 75

⇒ 5y = 75

⇒ y = 75/5

      = 15

Thus, the pivot point should be placed 15 m right from the 4kg board and 60 m left from 1kg block to be balanced.

Learn more about Gravity

https://brainly.com/question/940770

#SPJ4

A rock is thrown vertically upward at an initial velocity of 70 m/s.

The approximate acceleration of the rock when it reaches its maximum heigh is- zero

To learn more about acceleration here:-

https://brainly.com/question/12550364?referrer=searchResults

#SPJ4

After the equivalence point, pH of the base solution is 1.52.

The number of moles of base = 88.4 x 0.2700 = 23.868

The number of moles of acid = 0.4300 x 66.3 = 28.509

After the equivalence point,

Net moles of acid = 28.509 - 23.868

= 4.641mol

Total vol. of solution = 88.4 + 66.3 = 154.7mL

Conc. of Acid = moles/volume = 4.641/154.7 = 0.03M

pH = [tex]-log[H^{+} ][/tex] = -Log[0.03]

pH = 1.52

Hence, the pH of the base solution is 1.52.

The titration's equivalence point occurs when the amount of titrant applied is just sufficient to totally neutralize the analyte solution. In an acid-base titration, the solution only comprises salt and water at the equivalence point, where moles of base equal moles of acid.

The equivalency point for acid-base titrations is extremely simple to identify. To create a titration curve, different quantities of titrant are added, and then the pH of the solution is measured using a pH meter. Then, the curve's equivalence point can be determined.

To learn more about equivalence point  from the given link:

brainly.com/question/14782315

#SPJ4

Data can be displayed as graphs, which are graphic representations, to help identify trends more quickly.

A graph is a visual representation of the relationship between two variables, typically two variables that are measured along an axis that is perpendicular to the other two axes. A graph, in a nutshell, is a visual representation of data for easy comprehension. Graphs are commonly used to show scientific data so that readers may immediately see trends. Graphs are often used in the social sciences to visually convey important information. A network's connection between lines and points is represented mathematically by a graph. The points and arcs that connect them make form a graph.

Learn more about graphs here-

https://brainly.com/question/10712002

#SPJ4

Purpose, accuracy, and authority.

The first paragraph of your essay should outline your topic provide the background information you need to understand your claim, outline the evidence you present, and state your thesis. dissertation statement. This is part of the first paragraph. The five parts include a strong introductory paragraph with a clear thesis, three main paragraphs supported by detailed evidence, and a compelling conclusion.

Students should also use transition words and phrases to help readers explain their points of view. Developed by philosopher Stephen E. Toulmin, his Toulmin Method is a style of reasoning in which he decomposes claims into six components Claim Inference Warrant Limitation Refutation and Support. In Toulmin's method, each argument begins with three basic parts assertion justification and justification. These are the thesis statement the target audience needs, and support.

Learn more about Argumentation writing here:-https://brainly.com/question/11760020

#SPJ9

The change in the internal energy of the system is 96 j.

The change in the internal energy of the system is given by

              Δ U = Q + W

Q = 71.0 j

W = 25.0j

Δ U = Q + W

Δ U = 71 +25

Δ U = 96 j

The system's kinetic energy and potential energy together make up the system's internal energy. When a reaction is conducted at a constant pressure, the internal energy change (U) of the reaction is equal to the heat acquired or lost (enthalpy change).

A thermodynamic system's internal energy is its total internal energy. It is the energy required to build or prepare the system in the internal state that it is in at the time.

In thermodynamics, internal energy is a quantity or state function that characterizes a substance's energy when capillary effects and other external fields, such as electric and magnetic forces, are absent.

To learn more about internal energy from the given link:

brainly.com/question/11278589

#SPJ4

The electric field between the plates is 50,000 N/C.

It is provided that the separation d between the plates is 4.4 mm and the potential difference V between the plates is 220 V.

The electric field E between the plates can be formulated as follows.

E=[tex]\frac{V}{d}[/tex]

substituting the values in the equation,

E= [tex]\frac{220}{0.0044}[/tex]

E= 50,000 N/C

Hence, we can say that the electric field between the plates is 45833.33 N/C.

To know more about electric field, visit:

https://brainly.com/question/12757739

#SPJ4

The runner who starts from rest and attains a speed of 8.00 ft/s, after 2.00 s his acceleration would be 4ft/s^2.

An object’s velocity can change depending on whether that object moves faster or slower or in a different direction.

A few instances of acceleration include an apple falling to the ground, the moon orbiting the earth, and a car coming to a stop at a stop sign.

Sir Isaac Newton (1642–1727) defined acceleration in his second law of motion as the relationship between the force acting on an object and its mass: a = f/m.

The meter per second per second square (m/s2) is the unit of acceleration. The newton is the force that causes an acceleration of one newton per kilograms of mass when it acts on that mass.

u=0 (initial speed)

v= 8 ft/sec (speed of the runner)

t = 2s

According to equation of motion,

a = (v-u)/ t = 8/2

a= 4ft/s^2

To know more about Acceleration, visit:

https://brainly.com/question/12550364

#SPJ4

A hallmark of courage is being ready and willing to face challenging or uncomfortable circumstances. The word "bravery" is similar. It can also include doing so, even though confronting these situations fearlessly is generally thought of as showing courage.

In reality, courage is the capacity to move forward in the face of fear. The ability to behave bravely in the face of any anxiety or tension is what is meant by having courage. One of the finest ways to be courageous is to recognize your fears and then decide not to let them stop you. having the guts to handle risk in a responsible manner as opposed to acting cowardly or irrationally confident.

Learn more about Courage here-

https://brainly.com/question/11417801

#SPJ4

Answer:

metric

Explanation:

The speed of a moving rod that has a length 55 % that of an identical rod in terms of c will be v/c= 0.824

or v = 0.824c.

The formula for length contraction rod is,

L = L1{√(1-v^2/c^2)}

Here L is the length of the moving rod

L1 is the length of the stationary rod

v is the velocity with which the rod is moving

c is the speed of light

We are given that

L = 55% of L1 = 0.55L1

Putting the values in the above equation,

0.55L1 = L1{√(1-v^2/c^2)}

0.55 = {√(1-v^2/c^2)}

Squaring both sides

(0.55)^2 = 1- v^2/c^2

V^2/c^2 = 1 - 0.3025

V^2/c^2 = 0.6975

v/c = 0.824

Thus, the speed of  a moving rod that has  a length 55 % that of an identical rod in terms of c will be v/c= 0.824 or v = 0.824c.

To know more about "length contraction", refer to the link given below:

https://brainly.com/question/15868300

#SPJ4

The time of flight of the launched particle will be 2v₀ sinθ / g.

The study of motion without considering the mass and the cause of the motion.

A projectile is launched from level ground with an initial speed v₀ at an angle θ with the horizontal. If air resistance is negligible.

Then the time of flight of the launched particle will be given as,

Determine how long it requires the projectile to reach its highest point in order to calculate the flight duration. Just twice as long as the maximum altitude is the travel time.

[tex]\rm v_y = v_{o_y} + a_y t[/tex]

At maximum height, [tex]\rm v_y = 0[/tex].

The time to reach maximum height is given as

[tex]\rm t_{1/2} = - \dfrac{v_{o_y} }{ a_y}[/tex]

The time of flight is given as,

[tex]\rm t = 2 \times t_{1/2} = - \dfrac{2v_{o_y}}{ a_y}[/tex]

Substituting in [tex]\rm v_{o_y} = v_o \ \sin(\theta ) \ and \ a_y = -g[/tex], then we have

The time of flight of the launched particle will be 2v₀ sinθ / g.

More about the kinematics link is given below.

https://brainly.com/question/7590442

#SPJ4

Answer:

what graph?

Explanation:

please give the proper information

The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues.

The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound. The test get progressively faster as it continues until the student reaches their max lap score.

The PACER Test score is combined in the FitnessGram software with scores for muscular strength, endurance, flexibility and body composition to determine whether a student is in the Healthy Fitness Zone™ or the Needs Improvement Zone™.

1.72*10^-9

On an empty capacitor, there is no dielectric so E= 8.85E-12

C=EA/(d)

c is capacitance, A is area , d is distance between the parallel plate and E is dielectric constant.

C=(8.85E-12 c2/Nm2)(0.535m2)/ (2.75*10^-3m)

C= 1.72*10^-9

To know more about capacitance   visit : https://brainly.com/question/14746225

#SPJ4

The gravitational acceleration on the top of Mount Everest is 9.773 m/s^2.

What is gravitational acceleration?

Gravitational acceleration (symbolized g) is an expression used in physics to indicate the intensity of a gravitational field. It is expressed in meters per second squared. At the surface of the earth, 1 g is about 9.8 meter per squared second.

So, as mentioned in question g at surface of the earth is 9.81.

and the height of the Mount Everest is 8848 m.

Let, g' be the acceleration due to gravity on the top of Mount Everest.

By the equation,

[tex]g' = g(1-\frac{2h}{h})[/tex]

[tex]g' = 9.8(1-\frac{17696}{6500000})[/tex]

[tex]g' = 9.8(1-0.00276)[/tex]

[tex]g' = 9.8(0.99724)[/tex]

[tex]g' = 9.773[/tex]

Therefore, the gravitational acceleration at the top of the Mount Everest is [tex]9.773 \frac{m}{s^2}[/tex] (9.773 meter per squared second).

To know more about gravitational constant, go to URL

https://brainly.com/question/19050897

#SPJ4