Answer:
[tex]T_{eq}=28.9\°C[/tex]
Explanation:
Hello!
In this case, since it is observed that hot cadmium is placed in cold water, we can infer that the heat released due to the cooling of cadmium is gained by the water and therefore we can write:
[tex]Q_{Cd}+Q_{W}=0[/tex]
Thus, we insert mass, specific heat and temperatures to obtain:
[tex]m_{Cd}C_{Cd}(T_{eq}-T_{Cd})+m_{W}C_{W}(T_{eq}-T_{W})=0[/tex]
In such a way, since the specific heat of cadmium and water are respectively 0.232 and 4.184 J/(g °C), we can solve for the equilibrium temperature (the final one) as shown below:
[tex]T_{eq}=\frac{m_{Cd}C_{Cd}T_{Cd}+m_{W}C_{W}T_{W}}{m_{Cd}C_{Cd}+m_{W}C_{W}}[/tex]
Now, we plug in to obtain:
[tex]T_{eq}=\frac{37.60g*0.232\frac{J}{g\°C}*100.00\°C+25.00g*4.184\frac{J}{g\°C}*23.0\°C}{37.60g*0.232\frac{J}{g\°C}+25.00g*4.184\frac{J}{g\°C}}\\\\T_{eq}=28.9\°C[/tex]
NOTE: since the density of water is 1g/cc, we infer that 25.00 cc equals 25.00 g.
Best regards!
Which process creates two new cells from one existing cell in order to maintain homeostasis? (4 points) a Cell division b Cellular respiration c Photosynthesis d Reparation
Answer:
Cell division.
Explanation:
Which one please help!!
AgCl⇒ the precipitate
Further explanationGiven
Reaction
2AgNO₃+CaCl₂⇒2AgCl+Ca(NO₃)₂
Required
The precipitate
Solution
Solubility rules :
soluble compound :
All compounds of NO₃⁻ and C₂H₃O₂⁻
Compounds of Cl−, Br−, I− except Ag⁺, Hg₂²⁺, Pb²⁺
So AgCl⇒ the precipitate
Ca(NO₃)₂⇒aqueous
The name of the formula MnCl7
I need a lot of help pls help me
Iron forms both 2+ and 3+ cations. Write formulas for the oxide, sulfide, and chloride compounds of the 3+ iron cation.
Answer:
Fe2O3, Fe2S3 and FeCl3
Explanation:
The formular shows the number of atoms of element present in the compound. The number of atoms in turn depends on the charges. The goal is to have a neutral compound with oxidation number of zero.
Oxide:
Iron(Fe) has oxidation number (O.N) of +3, oxygen has O.N of -2. The formular with a balanced (Charge = 0) O.N number is; Fe2O3
Sulphide:
Iron(Fe) has oxidation number (O.N) of +3, sulphur has O.N of -2. The formular with a balanced (Charge = 0) O.N number is; Fe2S3
Chloride:
Iron(Fe) has oxidation number (O.N) of +3, chlorine has O.N of -1. The formular with a balanced (Charge = 0) O.N number is; FeCl3
c5h12 compound name
What are the rows of the periodic table called?
Answer:
"The elements are arranged in seven horizontal rows,called periods or series,and 18 vertical columns,called Groups."
Explanation:
Risk*
A 14.0 tank contains 250 g of methane (CH4) gas at 27 atm at 298 K. Accidentally, 190 g of CO2 was added to the tank. What will be the resulting pressure of the mixture in the tank? Assume that no CH4 leaked out as the CO2 gas waa being added.
Answer:
[tex]P=34.8atm[/tex]
Explanation:
Hello!
In this case, since the tank has a constant volume as well as temperature, we would be able to compute the resulting pressure via:
[tex]P=\frac{n_TRT}{V}[/tex]
Whereas the total moles are computed by adding the moles of each gas as shown below:
[tex]n_{CH_4}=250gCH_4*\frac{1molCH_4}{16.05gCH_4}=15.6molCH_4\\\\n_{CO_2}=190g CO_2*\frac{1molCO_2}{44.01gCO_2}=4.32molCO_2\\\\n_T= 15.6molCH_4+4.32molCO_2\\\\n_T=19.9mol[/tex]
Thus, we plug in the total pressure, temperature and volume to get the resulting pressure:
[tex]P=\frac{19.9mol*0.08206\frac{atm*L}{mol*K}*298K}{14.0L}\\\\P=34.8atm[/tex]
Best regards!
What is the name for C2I3
Answer: The correct name for the compound [tex]C_2I_3[/tex] is, Dicarbon triiodide.
Explanation:
[tex]C_2I_3[/tex] is a covalent compound because in this compound the sharing of electrons takes place between carbon and iodine.. Both the elements are non-metals. Hence, it will form covalent bond.
The naming of covalent compound is given by:
The less electronegative element is written first.
The more electronegative element is written second. Then a suffix is added with it. The suffix added is '-ide'.
If atoms of an element is greater than 1, then prefixes are added which are 'mono' for 1 atom, 'di' for 2 atoms, 'tri' for 3 atoms and so on.
Hence, the correct name for the compound [tex]C_2I_3[/tex] is, Dicarbon triiodide..
The sugar in your kitchen has a molar mass of 342.3 g/mol. How many particles are present inside a sugar bowl if there are 250 grams of sugar in it?
A. 1.5 x 10^26 particles
B. 6.02 x 10^23 particles
C. 4.4 x 10^23 particles
D. 1.8 x 10^21 particles
Number of particles inside a sugar bowl = 4.4 x 10²³
Further explanationGiven
The molar mass of sugar = 342.3 g/mol
mass of sugar = 250 g
Required
Number of particles
Solution
1 mol = 6.02 x 10²³ particles
mol of sugar :
[tex]\tt mol=\dfrac{mass}{molar~mass}[/tex]
mol = 250 g : 342.3 g/mol = 0.73 mol
Number of particles :
N = n x No
N = 0.73 x 6.02 x 10²³
N = 4.39 x 10²³ ≈ 4.4 x 10²³
(5) Use scientific notation, make the following conversions:
6.20 km to m
Answer:
6200 meters
Explanation:
To convert from km to m you have to multiply the number by a thousand
Answer:
6.2×10^3 m
Explanation:
6.20×1000=6200m
In scientific notation 6200 = 6.2×10^3
A sample of hydrate sodium carbonate has a mass of 71.5 g. after heating, the anhydrous sodium carbonate has a mass of 26.5 grams. Calculate the % water.
Answer:
62.9%
Explanation:
Step 1: Given data
Mass of hydrate sodium carbonate (mNa₂CO₃.xH₂O): 71.5 gMass of anhydrous sodium carbonate (mNa₂CO₃): 26.5 gStep 2: Calculate the mass lost of water
We will use the following expression.
mH₂O = mNa₂CO₃.xH₂O - mNa₂CO₃
mH₂O = 71.5 g - 26.5 g = 45.0 g
Step 3: Calculate the percent of water in the hydrate sodium carbonate
We will use the following expression.
%H₂O = mH₂O / mNa₂CO₃.xH₂O × 100%
%H₂O = 45.0 g / 71.5 g × 100%
%H₂O = 62.9%
Find the volume, in Liters, of 2.5 x 1024 molecules of chlorine gas at STP.
Answer:
V = 93.0 L
Explanation:
Hello!
In this case, when computing the PVT properties for an ideal gas, we need to use the following equation:
[tex]PV=nRT[/tex]
In such a way, for 2.5 x 10²⁴ molecules of chlorine at STP (273.15 K and 1.00 atm) we first need the moles based on the Avogadro's number:
[tex]n = 2.5x10^{24}molec*\frac{1mol}{6.022x10^{23}molec} = 4.15mol[/tex]
Now, we solve for volume on the ideal gas equation to obtain:
[tex]V=\frac{nRT}{P}[/tex]
So we plug in and get:
[tex]V=\frac{4.15mol**0.08206\frac{atm*L}{mol*K}*273.15K}{1.00atm}\\\\V=93.0L[/tex]
Best regards!
3) Tears are produced by the lacrimal glands located:
A) above the lateral canthus of each eye
B) below the medial canthus of each eye
C) below the lateral canthus of each eye
D) above the medial canthus of each eye
E) behind the nasal bones
if Fe(NO3)3 is dissolved in enough water to make exactly 323 ml of solution, what is the molar concentartion of nitrate ion g
The given question is incomplete. the complete question is : If 5.15 g[tex]Fe(NO_3)_3[/tex] is dissolved in enough water to make exactly 323 ml of solution, what is the molar concentartion of nitrate ion.
Answer: The molar concentartion of nitrate ion is 0.195.
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per Liter of the solution.
Given : 5.15 g of [tex]Fe(NO_3)_3[/tex] is dissolved
Volume of solution = 323 ml
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n= moles of solute
[tex]Moles=\frac{\text{Given mass}}{\text{Molar mass}}=\frac{5.15g}{242g/mol}=0.021moles[/tex]
[tex]V_s[/tex] = volume of solution = 323 ml
[tex]Molarity=\frac{0.021\times 1000}{323}=0.065M[/tex]
As 1 M of [tex]Fe(NO_3)_3[/tex] gives 3 M of [tex]NO_3^-[/tex] ions.
Thus 0.065 M of [tex]Fe(NO_3)_3[/tex] gives = [tex]\frac{3}{1}\times 0.065=0.195M[/tex] of [tex]NO_3^-[/tex] ions.
The molar concentartion of nitrate ion is 0.195.
QUESTION 4
How many significant figures are in the number 0.000020?
O A. 1
OB.2
O C.3
OD.4
Answer:
B) 2
Explanation:
There are two significant figures in given measurement,
2, 0
Significant figures:
1= The given measurement have four significant figures 1534.
2= All non-zero digits are consider significant figures like 1, 2, 3, 4, 5, 6, 7, 8, 9.
3= Leading zeros are not consider as a significant figures. e.g. 0.03 in this number only one significant figure present which is 3.
4= Zero between the non zero digits are consider significant like 107 consist of three significant figures.
5= The zeros at the right side e.g 2400 are also significant. There are four significant figures are present.
what????????????????????????????????????????????????
Answer:
I
Explanation:
d
k
uhm....is there anything you need help with?
How many moles of Aluminum are produced when34.2 g of alumina are broken down through the process of electrolysis
Answer:
0.670 mol
Explanation:
Step 1: Write the balanced reaction for the decomposition of alumina
2 Al₂O₃ ⇒ 4 Al + 3 O₂
Step 2: Calculate the moles corresponding to 34.2 g of Al₂O₃
The molar mass of Al₂O₃ is 101.96 g/mol.
34.2 g × 1 mol/101.96 g = 0.335 mol
Step 3: Calculate the moles of Al produced from 0.335 moles of Al₂O₃
The molar ratio of Al₂O₃ to Al is 2:4.
0.335 mol Al₂O₃ × (4 mol Al/2 mol Al₂O₃) = 0.670 mol Al
The United States National Weather Service reports pressure in mm of Hg. What's the pressure of 725 mmHg in Pa, millibars, and Torr?
A. 101.325 Pa, 966 millibar, 725 Torr
B. 100,000 Pa, 1000 millibar, 760 Torr
C. 96,657 Pa, 966 millibar, 725 Torr
D.100.000 Pa, 760 millibar. 725 Torr
Answer:
C. 96,657 Pa, 966 millibar, 725 Torr
Explanation:
The pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.
What is pressure?Pressure is defined as the force that is applied perpendicularly to an object's surface in relation to the area that it is dispersed over. Pressure can actually be a very good thing. Stress only occurs and has a fully negative impact when it continues to grow and that sensation of serenity and order is replaced with one of being out of control.
Given pressure = 725 mmHg
1 mmHg = 133.32 Pa
725 mmHg = 133.32 x 725 Pa
= 96,657 Pa
1 mmHg = 1.333 millibar
725 mmHg = 725 x 1.333 millibar
= 966 millibar
1 mmHg = 1 torr
725 mmHg = 725 Torr
Thus, the pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.
To learn more about pressure, refer to the link below:
https://brainly.com/question/15175692
#SPJ2
HELP PLEASE
A sudden gust of wind increases the velocity of a sailboat relative to the water surface from 3.0m/s over a period of 30.0s. Using the formula a=change in velocity /t, what is the average acceleration of the sailboat?
•2.5m/s2
•1.2m/s2
•25m/s2
•0.083m/s2
( the 2's are exponents)
Answer:
average velocity for the time interval from t = 2 s to t = 4 s? ... fractional difference in the two methods when a steady wind blows along the car's route and the ... weight, but when the film reaches the drop, the drop's water suddenly ... boat, moving with constant velocity, that is 12 m from the point of impact when the key is.
Explanation:
ABOVE
The average acceleration of the sail boat is 0.083 m/s². Thus option d is correct.
What is acceleration?Acceleration is defined as the rate of change of velocity of an object with respect to time.
It is a vector quantity.
Acceleration can also be defined as the velocity change rate over time, in terms of both speed and direction
Average acceleration is defined as the rate of change of velocity of an object for the particular interval of time.
Average acceleration can also be defined as the change in velocity divided by the time elapsed.
It is measured in meter per second.
Average acceleration = Change in velocity / time
= 5.5 - 3.0 / 30.0
= 0.083 m / s²
Thus, the average acceleration of the sail boat is 0.083 m/s². Thus option d is correct.
To learn more about acceleration, refer to the link below:
https://brainly.com/question/12550364
#SPJ5
Your question is incomplete, but probably your complete question was
A sudden gust of wind increases the velocity of a sailboat relative to the water surface from 3.0m/s to 5.5m/s over a period of 30.0s. Using the formula a=change in velocity /t, what is the average acceleration of the sailboat?
•2.5m/s2
•1.2m/s2
•25m/s2
•0.083m/s2
Air masses carry their own weather.
True
False
The question is number 8
Which one of these is NOT one of the characteristics of living things?
A.All living things reproduce.
B.All living things are composed of one or more cells.
C.All living things grow develop and have life spans.
D.All living things provides heat and light on Earth.
Answer:
D. All living things provides heat and light on Earth.
Explanation:
its the sun that does that
Answer:
option d.
Explanation:
all living things provides heat and light on Earth.
Which electron configuration is impossible?
a. ls22s22p2d2
b. 1s22s22p63s23p64s
c. 1s22s22p63s23p3
d. 1s22s22p63s2
e. 1s22s22p63s23s54s
1
Answer:
MP hippopotamus
Explanation: I'm in the fifth grade so yeah I really don't know this so I'm just going to say some random stuff and white cheddar mac and cheese warm TV perfect back MD 11443 to 2885 eleven 12:20 to 11 132 0.24 answer
The IUPAC name of(CH3)2CHCH2CH=CH2
Answer:
4-Methyl-1-pentene
Explanation:
According to the International Union of Pure and Applied Chemistry (IUPAC), IUPAC nomenclature of organic chemistry is defined as the system of naming organic chemical compounds.
There are certain rules for naming organic chemical compounds as per IUPAC. The name of given (CH3)2CHCH2CH=CH2 will be based on the same rules.
At first find out the longest continuous chain and number the chain consecutively (preference given to double and single bonds), so numbering will start from right to left. the given chemical is 5 Carbon chain long.Then, identify the groups attached to this chain. Methyl is the only group attached to this chain at 4 Carbon.Assemble the name in alphabetical order using the full name using correct prefix and suffix.4-Methyl-1-pentene is the name of this chemical, as methyl is in 4th carbon position, Pent for 5 carbon chain and -ene (suffix) for one double bond).
Hence, the correct answer is "4-Methyl-1-pentene".
What causes the moon to be illuminated?
A. concave
B. reflection
C. medium
D. refraction
Answer:
Reflection
Explanation:
The light from Earth's surface, reflected back towards the Moon, can illuminate it all the same. This is why, when the Moon is in a crescent phase, you can still see features on the dark portion of the Moon: we call this reflected, illuminating light the phenomenon of Earthshine.
The subatomic particle that is different in isotopes
Answer:
Neutrons
Explanation:
Subatomic particles are components atoms, and they include protons, electrons and neutrons. In different isotopes of an atom, the number of neutrons that the atom contains is what changes.
I hope this helps!
What is public participation? Why is it
necessary for environmental conservation
Answer:
maile pani aii khojeko tmle sideko dekhya ani thicheko ani comment garya haha
A solution is made by mixing 49.g of chloroform CHCl3 and 73.g of acetyl bromide CH3COBr. Calculate the mole fraction of chloroform in this solution. Round your answer to 2 significant digits.
Answer: The mole fraction of chloroform in this solution is 0.41
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
a) moles of [tex]CHCl_3[/tex]
[tex]\text{Number of moles}=\frac{49g}{119g/mol}=0.41moles[/tex]
b) moles of [tex]CH_3COBr[/tex]
[tex]\text{Number of moles}=\frac{73g}{123g/mol}=0.59moles[/tex]
To calculate the mole fraction, we use the formula:
[tex]\text{Mole fraction of a component}=\frac{\text{Moles of the component}}{\text{total moles}}[/tex]
[tex]\text{Mole fraction of chloroform}=\frac{\text{Moles of chloroform}}{\text{total moles}}=\frac{0.41}{0.41+0.59}=0.41[/tex]
The mole fraction of chloroform in this solution is 0.41
A student is trying to determine the density of a piece of metal. She uses a balance and finds that the mass of the piece of metal is 15.36 g. To determine the volume of the metal she fills a graduated cylinder to 30.0 mL and then drops the piece of metal into the graduated cylinder. The final volume of the metal 34.1 mL. What is the density of the piece of metal
Answer:
3.746 g/mL
Explanation:
Mass of metal = 15.36 g
Initial Volume = 30.0 mL
Final Volume = 34.1 mL
Volume of metal = Final Volume - Initial Volume = 34.1 mL - 30.0 mL
Volume of metal = 4.1 mL
Density = ?
The relationship between the values is given as;
Density = Mass of metal / Volume of metal
Inserting the values;
Density = 15.36 / 4.1 = 3.746 g/mL
The density of the piece of metal is 3.746 g/ml.
How to find the density of any metal?Given the mass of metal is 15.36 g
The initial volume of a cylinder is 30.0 ml
The final volume after putting metal in it is 34.1ml
Step 1- To find the volume:
The volume of metal = Final Volume – Initial Volume 30.0 mL
Volume of metal = 34.1 – 30.0 = 4.1 ml
Volume of metal = 4.1 mL
Step 2- Find the Density:
Density = Mass of metal is divided by the Volume of metal
[tex]\bold{Density = \dfrac{15.36 }{4.1} =3.746 g/ml}[/tex]
Thus, the density is 3.746 g/ml.
Learn more about density, here:
https://brainly.com/question/952755
Which equation could be used to solve for the average speed of a car that travels 90m in 20 seconds?
Answer:
Vav=d/t
Explanation:
Because the question already gave d=90m and t=20s. Because the car is the thing that can not travel the same distances at the same times.So the equation is V[tex]\\_{av}[/tex]=[tex]\frac{d}{t} \\[/tex]
how are the terms atom and element different?
Answer:
Element is made from same type of atoms
While atom is present in element made up of different particles like proton neutrons electron etc
Explanation: