Answer:
124.86 V
Explanation:
We have to first calculate the voltage drop across the copper wire. The copper wire has a length of 358 ft
1 ft = 0.3048 m
358 ft = 109.12 m
The diameter of 2 AWG copper wire (d) = 6.544 mm = 0.006544 m
The area of the wire = πd²/4 = (π × 6.544²)/4 = 33.6 mm²
Resistivity of wire (ρ) = 0.0171 Ω.mm²/m
The resistance of the wire = [tex]\frac{\rho A}{l}=\frac{0.0171*109.12 }{33.6} =0.056\ ohm[/tex]
The voltage drop across wire = current * resistance = 6.1 A * 0.056 ohm = 0.34 V
The voltage at end = 125.2 - 0.34 = 124.86 V
Two hockey players are about to collide on the ice. One player has a mass of
66 kg and is traveling at 1.5 m/s north. The other has a mass of 75 kg and is
traveling at 1.2 m/s south. The system consists of the two tlockey players.
According to the law of conservation of momentum, what is the total
momentum of the system after they collide? Assume the collision is an
elastic collision.
A. 189 kg-m/s south
O B. 9 kg-m/s north
C. 189 kg.m/s north
D. 9 kg m/s south
Answer:
Option B: 9 kg.m/s North
Explanation:
We are told;
One player has a mass of
66 kg and is traveling at 1.5 m/s north.
Thus, velocity is positive since it's acting in the positive direction upwards.
Thus;
m1 = 66 kg
v1 = 1.5 m/s
Also, The other has a mass of 75 kg and is traveling at 1.2 m/s south.
Since it's traveling south, it means that velocity is negative. Thus;
m2 = 75 kg
v2 = -1.2 m/s
From conservation of mass, total momentum is;
m_total = m1•v1 + m2•v2
m_total = (66 × 1.5) + (75 × -1.2)
m_total = 99 - 90
m_total = 9 kg.m/s
This is positive and thus it will be in the direction of the north.
Answer:
9 kg-m/s north
Explanation:
The first group of planets that are made of rock and closest to the sun
Answer:
A terrestrial planet, telluric planet, or rocky planet is a planet that is composed primarily of silicate rocks or metals. Within the Solar System, the terrestrial planets are the inner planets closest to the Sun
.Why does it take double the applied force to move a mass double the size?
Explain this in terms of inertia,
Answer:
NVIDIA GeForce RTX 3080 10GB GDDR6X PCI Express 4.0 Graphics Card
Explanation:
If a car traveled 50 meters in 2 seconds, what will the velocity be? (Write the answer with a number, on decimal if needed, then a space and the units, for example 5.7 m/s)
Answer:
The answer is 25 m/sExplanation:
The velocity of the car can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
d is the distance
t is the time taken
From the question we have
[tex]v = \frac{50}{2} \\ [/tex]
We have the final answer as
25 m/sHope this helps you
A coiled telephone cord forms a spiral with 65.0 turns, a diameter of 1.30 cm, and an unstretched length of 65.5 cm. Determine the inductance of one conductor in the unstretched cord.
Answer:
[tex]L=1.07\ \mu H[/tex]
Explanation:
Given that,
No of turns in a coiled telephone cord is 65
The diameter of the coil, d = 1.3 cm = 0.013 m
Radius, r = 0.0065 m
Unstretched length of the coil, l = 65.5 cm = 0.655 m
We need to find the inductance of one conductor in the unstretched cord. The formula for the inductance is given by :
[tex]L=\dfrac{\mu_oN^2 A}{l}\\\\L=\dfrac{4\pi \times 10^{-7}\times (65)^2\times \pi (0.0065)^2}{0.655 }\\\\L=1.07\times 10^{-6}\ H\\\\L=1.07\ \mu H[/tex]
So, the inductance of one conductor in the unstretched cord is [tex]1.07\ \mu H[/tex].
A hockey puck is sliding on frictionless ice, in an Eastward direction. It collides with a second hockey puck, initially stationary, which then goes off in the Northern direction. What direction is the first hockey puck moving after the collision
Answer:
Southeast
Explanation:
We have to put into cognisance that the first hockey puck is moving in the eastern direction in the first instance, before it hits the other stationary hockey puck. And as such, on hitting the second puck, it's displacement is expected to differ, as a result of the collision. While the stationary puck will the move in the Eastern direction, it changes the direction of the first puck, from eastern to southeastern
True or False. A compound is formed when two or more elements are combined to make a
new substance with its own properties.
Anyone?
Answer:
I believe It's true. Since from memory I KNOW a compound is formed when elements are combined chemically.
Answer: correct
Explanation: a compound is 2 or more elements formed to make a completely new thing. For example, water is a compound. Why? Well, water is h20. What is h20? It’s Hydrogen and Oxygen. Oxygen is also a compound. Another example is CO2 (carbon dioxide) it’s made of carbon and oxygen, so it’s a compound! A element is just a pure substance. It’s not made up of other materials. It’s in its purest form.
pLEasE aNSWer CorRReCtly
Answer:
season, axis
Explanation:
The earth's axis is responsible for the changing seasons
Which of the following is made up of vibrating electric and magnetic fields
traveling together?
A. An electromagnetic wave
B. A generator
C. An induced current
D. An electromagnet
Answer:
A. An electromagnetic wave
Explanation:
A P E X
If a star appears to wobble back back and forth, or its light seems to change in brightness, what might be the cause?
Answer:
The first method, known as the wobble method, looks for changes in a star's relative velocity caused by the gravitational tug of a nearby planet. ... If a planet's orbit crosses between its parent star and Earth, it will block some of the light and cause the star to dim.
Explanation:
We all know that the chains of gravity shackle a planet to its star. That star's enormous gravitational influence keeps its planetary family in orbit. But gravity works both ways: as the planets sweep around in their orbits, they tug on their parent stars to and fro, causing those stars to wobble
Answer:
The way it’s orbiting
Explanation:
The picture below shows a science model made with a balloon, cord, and radiosonde.
Image showing a science model made with a balloon; at the bottom of the balloon is a cord with a radiosonde attached to it.
Which of these is most likely the function of the science model?
To change the density of air
To increase the humidity in air
To reduce the atmospheric pressure
To predict extreme weather conditions
Answer:
Since the person above didn't answer correctly I will, the correct option is (D) this is because the picture shown is of a weather balloon and the purpose of this device is to predict weather and its conditions
Hope this helped! (: Have a nice day
Answer: To predict extreme weather conditions
A radiosonde is a small tool that is put under a balloon filled with either hydrogen or helium. As the radiosonde goes up it measures pressure, temperature, and relative humidity.
How does temperature effect density and the flow of convection currents?
Answer:
Convection
Explanation:
Convection is heat transfer due to a density differential within a fluid. As water's temperature increases in the presence of a heat source, it will become less dense and rise. As it moves up and away from the heat source, it cools and becomes more dense and sinks.
Ken Griffey, Jr's warehouse shot in the 1933 home run derby travelled 93 feet per second for 5 seconds. How far did he hit the ball?
Answer:
465 feet because 93*5 = 465, btw that was 1993 not 1933
Explanation:
How do covalentes bonds form
Which change of state is shown in the model?
-condensation
-deposition
-boiling
-freezing
Answer: what’s the model
Explanation:
it's B hope this help's
if an object is moving with a velocity of 25m/s, an acceleration of 5m/s and has a travel time of 5s, what is the final velocity of the object?
V = at + V0
where v0 is the initial speed, a is the acceleration and t is the time.
So:
v = 5m/s^2*5s + 25m/s = 50 m/s
a 2000 kg car moving down the road runs into a 5000 kg stationary suv. The car applies a force of 1400 n on the suv what is the magnitude of force applied by the suv on the car
Answer:
F_suv= 49050 N
Explanation:
We are told that a 2000 kg car moving down the road runs into a 5000 kg stationary suv. The car applies a force of 1400 N on the suv.
Now, according Newton's first law of motion, an object will continue in it's present state of rest except it is acted upon by an external body.
This means the force acting on the stationary Suv is force of gravity.
Thus; F_suv = 5000 × 9.81
F_suv= 49050 N
A baseball is thrown at an angle of 25 degrees relative to the ground at a speed of 23 m/s. If the ball was caught 42 m from the thrower:
What is the initial vertical velocity?
What is the initial horizontal velocity?
How long was it in the air?
How high did the ball travel before being caught?
Answer:
a) [tex] v_{0y} = 9.72 m/s [/tex]
b) [tex] v_{0x} = 20.85 m/s [/tex]
c) [tex] t = 2.01 s [/tex]
d) [tex] h_{max} = 4.82 m [/tex]
Explanation:
a) The initial vertical velocity is given by:
[tex] v_{0y} = v*sin(\theta) [/tex]
Where:
θ: 25°
v: is the magnitude of the speed = 23 m/s
[tex] v_{0y} = 23 m/s*sin(25) = 9.72 m/s [/tex]
b) The initial horizontal velocity can be calculated as follows:
[tex] v_{0x} = v*cos(\theta) = 23 m/s*cos(25) = 20.85 m/s [/tex]
c) The flight time can be calculated using the following equation:
[tex] v_{0x} = \frac{x}{t} [/tex]
Where:
x: is the total distance = 42 m
[tex] t = \frac{x}{v_{0x}} = \frac{42 m}{20.85 m/s} = 2.01 s [/tex]
d) The maximum height is given by:
[tex] v_{fy}^{2} = v_{0y}^{2} - 2gh_{max} [/tex]
Where:
[tex] v_{fy}[/tex]: is the final vertical velocity =0 (at the maximum heigth)
g: is the gravity = 9.81 m/s²
[tex]h_{max} = \frac{v_{0y}^{2}}{2g} = \frac{(9.72 m/s)^{2}}{2*9.81 m/s^{2}} = 4.82 m[/tex]
I hope it helps you!
What is the differential equation governing the growth of current in the circuit as a function of time after t
Complete question is;
What is the differential equation governing the growth of current in the circuit as a function of time after t = 0? express the right - hand side of the differential equation for di(t)/dt in terms of i(t), v_b, r, and l?
Answer:
v_b = ir + L(di/dt)
Explanation:
I've attached the image of the circuit talked about in this question.
From the attached image, we can see that this circuit is an R-L circuit.
Since we want a differential equation for di(t)/dt that contains i(t), v_b, r, and L, we can start by finding v_b in R-L circuit which is;
v_b = v_r + v_i
where;
v_b is the voltage source.
v_r is the voltage across the resistance
v_i is the voltage across the inductance
Now, the voltage across the inductance could also be expressed as;
v_i = L(di/dt)
where;
L is the circuit inductance
Also, the voltage across the resistance could be as expressed as;
v_r = ir
Where;
r is the resistance
i is the current
Thus;
v_b = ir + L(di/dt)
PLZ HELP help me help help
Answer:
matter
Explanation:
Hope I helped :)
Sean and Tommy are debating the positive and negative impacts of technology on environmental quality. Tommy is listing the negative impacts. Which of the following would help his argument? (2 points)
Grupp av svarsalternativ
Solar panels have become more effective due to technological improvements.
Technology has helped make recycling to be more efficient.
It has created new ways to clean up oil spills.
Factories contribute to air and water pollution.
Answer:
Factories contribute to air and water pollution.
Explanation:
a kid is flying a kite 58 meters above the level ground. a small lead sphere is dropped from the kite. calculate the amount of time required for the sphere to fall to the ground
This is the formula you need to memorize:
D = 1/2 · a · T²
Distance = (1/2) · (acceleration) · (Time²)
This formula tells the distance an object falls in any amount of time.
This question tells you the distance (58m), and you know the acceleration (gravity, 9.8 m/s²), so you can use this formula to find the time.
Distance = (1/2) · (acceleration) · (Time²)
58m = (1/2) · (9.8 m/s²) · (Time²)
Divide each side by (4.9 m/s²) : Time² = (58/4.9) seconds²
Take the square root of each side: Time = 3.44 seconds
After school, a student rides his bike back home. The student lives 750 meters from the school. If it takes the student 3 minutes to get home, what is his average speed?
Answer:
(4,5) and (8,10) what is the slope
Explanation:
After school, a student rides his bike back home. The student lives 750 meters from the school. If it takes the student 3 minutes to get home, what is his average speed?
A projectile rolls off a cliff with a velocity of 40 m/s. The cliff is 60 meters high.
1. Calculate the time the projectile takes to hit the ground
2. Calculate the distance the projectile travelled on the X-axis horizontally before hitting the ground
3. Calculate the impact velocity of the projectile on the Y-axis
4. Calculate the Resultant velocity V r
5. Calculate the angle at which the projectile hits the ground
6. Calculate Sine Θ
7. Calculate Tan Θ
8. A final Resultant Velocity Statement
Answer:
1) t = 3.45 s, 2) x = 138 m, 3) v_{y} = -33.81 m /s, 4) v = 52.37 m / s ,
5) θ = -40.2º
Explanation:
This is a projectile exercise, as they indicate that the projectile rolls down the cliff, it goes with a horizontal speed when leaving the cliff, therefore the speed is v₀ₓ = 40 m / s.
1) Let's calculate the time that Taardaen reaches the bottom, we place the reference system at the bottom of the cliff
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
When leaving the cliff the speed is horizontal v_{oy}= 0 and at the bottom of the cliff y = 0
0 = y₀ - ½ g t2
t = √ 2y₀ / g
t = √ (2 60 / 9.8)
t = 3.45 s
2) The horizontal distance traveled
x = v₀ₓ t
x = 40 3.45
x = 138 m
3) The vertical velocity at the point of impact
v_{y} = I go - g t
v_{y} = 0 - 9.8 3.45
v_{y} = -33.81 m /s
the negative sign indicates that the speed is down
4) the resulting velocity at this point
v = √ (vₓ² + v_{y}²)
v = √ (40² + 33.8²)
v = 52.37 m / s
5) angle of impact
tan θ = v_{y} / vx
θ = tan⁻¹ v_{y} / vx
θ = tan⁻¹ (-33.81 / 40)
θ = -40.2º
6) sin (-40.2) = -0.6455
7) tan (-40.2) = -0.845
8) when the projectile falls down the cliff, the horizontal speed remains constant and the vertical speed increases, therefore the resulting speed has a direction given by the angle that is measured clockwise from the x axis
Regular exercise can:
A.
Reduce stress and anxiety
B.
Boost your immune system
C.
Increase your overall feeling of wellness
D.
All of the above
Answer:
D
Explanation:
A 60-kg woman runs up a staircase 15 m high (vertically) in 20 s.
Required:
a. How much power does she expend?
b. What is her horsepowerrating.
Answer:
(a) 441 W (b) 0.59 hP
Explanation:
Given that,
Mass of a woman, m = 60 kg
Height of a staircase, h = 15 m
Time, t = 20 s
(a) We need to find the power she expend. Work done per unit time is called power. It is given by :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{mgh}{t}\\\\P=\dfrac{60\times 9.8\times 15}{20}\\\\P=441\ W[/tex]
( b) Since, 1 hP = 745.7 W
P = 0.59 hP
1000 kg car takes travels on a circular track having radius 100 m with speed 10 m/s. What is the minimum coefficient of static friction between tires and track needed to keep the car on circular path. *
A- 0.01
B- 0.05
C- 0.1
D- 0.2
Answer:
C. 0.1
Explanation:
A carbon ion with 10 electrons and 6 protons would have a charge of ?
Answer:
-4
Explanation:
Electrons are negative while protons are positive.
To find the charge, add the number of protons to the number of electrons.
6+(-10)
6-10
-4 is the charge
How long would it take a 500. W electric motor to do 15010 J of work?
A 1200-kg car initially at rest undergoes constant acceleration for 8.8 s, reaching a speed of 10 m/ s. It then collides with a stationary car that has a perfectly elastic spring bumper. What is the final kinetic energy of the two-car system
Answer:
The final kinetic energy of the two-car system is 60,000 J.
Explanation:
Given;
mass of the car, m = 1200 kg
time of motion, t = 8.8 s
final velocity of the car, v = 10 m/s
Apply the principle of conservation of kinetic energy; the initial kinetic energy is equal final kinetic energy.
[tex]K.E_i = K.E_f\\\\K.E_f = \frac{1}{2}mv^2\\\\K.E_f = \frac{1}{2}(1200)(10)^2\\\\K.E_f = 60,000 \ J[/tex]
Therefore, the final kinetic energy of the two-car system is 60,000 J.