ANSWER ASAP Which part of the picture shows evidence of matter scattering light waves in
many different directions?
O A. The color of the tree appears black against the sky.
O B. The image of the moon in the sky is incomplete.
OC. The image of the moon on the water's surface is distorted.
OD. The colors on the water's surface match the colors in the sky.
Answer:
The evidence of matter scattering light wave in many different directions is;
D. The colors on the water's surface match the colors in the sky
Explanation:
Light scattering is used to describe the sending of a given beam of light in many directions (by tiny particles) when the light passes through a medium, due to the disruption of the bath of the light ray as it bumps into the tiny particles
Water has the nature of absorbing the red light. The light that enters the water is scattered by the tiny particles in the water such that the blue light which is the spectrum of light water allows to pass through is reflected along with the reflection of the sky and the colors of the water surface match the colors of the sky.
Answer:
C.
Explanation:
I took the quiz
If something is up higher it will have ________________ potential energy.
the same
more
less
Answer:
More
Explanation:
Is Mg(CH3COO)2 soluble or insoluble
Answer:
It is Soluble
Explanation:
Name- Magnesium acetate
It dissolves easily in water and alcohol.
HELP!!! 2Mg+O2->2MgO
What are the products of this reaction??
WILL GIVE BRAINLEST
Answer:
the products which is formed in the given reaction is MgO ( magnesium oxide )
Explanation:
when magnesium metal reacts with oxygen present in air it burns with a white dazzling flame
to form white powder of magnesium oxide (MgO)
here's the balanced chemical reaction for it
2Mg+O2->2MgO
How is chemical bonding useful to our lives?
Answer:
Three types of chemical bonds are important in human physiology, because they hold together substances that are used by the body for critical aspects of homeostasis, signaling, and energy production, to name just a few important processes. These are ionic bonds, covalent bonds, and hydrogen bonds.
Explanation:
Our Sun will eventually turn into a red giant and, finally, a white dwarf. Use the Hertzsprung-Russell
diagram to describe how the Sun's luminosity and temperature will change as it goes through these
stages.
Our Sun will eventually turn into a red giant in the cooler temperature and high luminosity and in the white dwarf phase has a hot temperature & dim luminosity.
What is Hertzsprung-Russell diagram?In astronomy, the Hertzsprung-Russell diagram, often known as the H-R diagram, is a graph that plots the absolute magnitudes (intrinsic brightness) of stars against their spectral classifications (temperatures).
From the given diagram it is clear that when sun turns into a red giant then the temperature decreases and luminosity increases as it becomes large in size. And when it finally become a white dwarf then temperature comparatively increases and luminosity gets dim due to smaller size.
Hence in the red giant phase sun has a cooler temperature and high luminosity and in the white dwarf phase has a hot temperature & dim luminosity.
To know more about Hertzsprung-Russell diagram, visit the below link:
https://brainly.com/question/22641110
#SPJ2
Please help... giving a lot of points and awarding brainliest.
what is a galvanic cell made of?
A. two electrodes in electrolyte solution
B. two beakers connected by a tube
C. two ceramic plates in pure water
D.two medal strips surrounded by air
Explanation:
A because A galvanic cell consists of two half-cells, such that the electrode of one half-cell is composed of metal A, and the electrode of the other half-cell is composed of metal B; the redox reactions for the two separate half-cells are thus: An+ + ne− ⇌ A.
Answer:
A
Explanation:
Which is the balanced equation for S8 + O2 → SO2?
S8 + O16 → 8SO2
S8 + O2 → S8 + O2
S8 + O2 → S8O2
S8 + 8O2 → 8SO2
Answer: S8 + O2 → S8O2: not 100% sure
Explanation:
A balanced chemical equation happens when the quantity of the particles is required on the reactants side is equivalent to the quantity is the molecules in the items side.
In Step 5, you will calculate H+/OH– ratios for more extreme pH solutions. Find the concentration of H+ ions to OH– ions listed in Table B of your Student Guide for a solution at a pH = 2. Then divide the H+ concentration by the OH– concentration. Record these concentrations and ratio in Table C. What is the concentration of H+ ions at a pH = 2? mol/L What is the concentration of OH– ions at a pH = 2? mol/L What is the ratio of H+ ions to OH– ions at a pH = 2? : 1
The ratio of H⁺ ions to OH⁻ ions at a pH = 2 is 10¹⁰
Further explanationGiven
ph = 2
Required
The concentration of H⁺ and OH⁻ ions
Solution
The concentration of H⁺ ionspH=-log[H⁺]
2=-log[H⁺]
[H⁺]=10⁻²
The concentration of OH⁻ ionspH+pOH=14
pOH=14-2
pOH=12
pOH=-log[OH⁻]
12=-log[OH⁻]
[OH⁻]=10⁻¹²
The ratio of H⁺ ions to OH⁻ ions at a pH = 2[tex]\tt \dfrac{10^{-2}}{10^{-12}}=10^{10}[/tex]
Answer:
First one: 0.01
second one: 0.000000000001
third one: 10000000000
Which feature does an iron metal have?
O electrons that transfer between atoms to make cations and anions
O a sea of electrons
O firmly bonded electrons
O electrons shared between single pairs of atoms
Answer:
a sea of electrons
Iron metal has a sea of electrons.
Iron metal is an element which possesses a sea of electrons as a result of it
containing cations which are usually surrounded by electrons which move at
a very fast pace .
This property makes Iron metal to be reactive when exposed to air( oxygen)
and it then forms various compounds such as Iron(II) oxide, Iron(III) oxide and
rust.
Read more on https://brainly.com/question/20466452
Iron-containing minerals in rocks may combine with water and air to create rust. This is an example of
A. chemical weathering
B. mechanical weathering
C. abrasion
D. exfoliation
Answer:
A
Explanation:
chemical reaction are those type of reaction that are irreversible and a new substance is being formed therefore when the iron combine with water and air it leads to rusting.
What are the four functions of cell division?
Answer:
Cellular division has three main functions: (1) the reproduction of an entire unicellular organism, (2) the growth and repair of tissues in multicellular animals, and (3) the formation of gametes (eggs and sperm) for sexual reproduction in multicellular animals.
Answer:
There are four key reasons why a cell may be required to divide mitotically:
Tissue repair / replacement.
Organismal growth.
Asexual reproduction.
Development (of embryos)
Explain the process of ionic bond formation between K
(potassium, a metal) and Br (bromine, a nonmetal).
I
Answer:
Metals transfers electrons to nonmetals. So K transfers one electron to Br because K is located at 1A in the periodic table. Br has seven electrons, now both K and Br are stable by gaining and losing one electron. The transfer of electrons makes metals to become positive ions and nonmetal to become negative ions. When an ionic bond is formed, the charges attract each other.
Answer: Metals transfers electrons to nonmetals. Potassium -K transfers one electron to bromine- Br because K is located in group 1A on periodic table. Br has seven electrons and located group 7A. Both K and Br stable by gaining and losing one electron. The transfer of electrons makes metals to become + positive ions and nonmetal to become - negative ions. An ionic bond is formed, the charges attract each other.
Explanation: Metals donate, or transfer, electrons to the nonmetal.
The transfer of electrons creates a positive ion and a negative ion.
An ionic bond is formed when the charges attract each other.
What conversion factors
determine the number of
molecules from the mass of a
compound?
Answer: Multiply the mass by the inverse of molar mass, and then multiply by Avogadro's number.
Explanation: Convert the mass to moles, multiply the number of moles by the ratio of the number of atoms or ions to one mole, multiply by Avogadro's number.
Metals tend to — electrons and nonmetals tend to —
Electrons
Answer:
Non-metals tend to gain electrons to attain Noble Gas configurations. The have relatively high Electron affinities and high Ionization energies. Metals tend to lose electrons and non-metals tend to gain electrons, so in reactions involving these two groups, there is electron transfer from the metal to the non-metal.
What is chemical structure about?
Answer:
chemical structure determines the molecular geometry of ca compound by prtraying the arrangement of atoms and chemical bonds in the molecule..
Explanation:
hope this helps any <3
The prefix "semi-" means "partly". Based on your knowledge of the properties of elements, which kind of element is most likely used to make semiconductors?
liquids
metalloids
metals
nonmetals
Answer:
metalloids
Explanation:
The kind of element most likely used to make semiconductors are the metalloids.
These elements have properties between those of metals and non-metals in that they are not truly metals and are partly non-metals.
Under certain conditions they show features of metals or non - metals. The class of these elements are the metalloids. They are used to make semiconductors which are major components of electronics.The temperature of a city during a week was 35° C, 36°C, 34°C, 38°C, 40°C, 39°C and 44°C. What was the average daily temperature of the town for the week?
Answer:38°
Explanation:
Are assorted jelly beans heterogeneous or homogeneous
Heterogeneous, which means that they are not evenly combined.
How many molecules of nitrogen dioxide NO2 are in 1 mole of NO2?
Answer:
The answer is 46.0055. We assume you are converting between grams NO2 and mole. You can view more details on each measurement unit: molecular weight of NO2 or mol This compound is also known as Nitrogen Dioxide.
Explanation:
hope this helps
Can anybody help me asap pls
Answer:
Here is ur answer...
Explanation:
2) Half-filled d orbital increases the stability of the element.
1. What did Henri Becquerel discover about
radiation emitted from uranium salts?
Explanation:
When Henri Becquerel investigated the newly discovered X-rays in 1896, it led to studies of how uranium salts are affected by light. By accident, he discovered that uranium salts spontaneously emit a penetrating radiation that can be registered on a photographic plate.
Select the correct answer from each drop-down menu.
Researchers stationed at different areas on a mountain and in a tunnel midway through the mountain boiled water at the same time. Even though the water at every station was at the same temperature, the pot at the top of the mountain started boiling before the others. Why?
Water boils when the vapor pressure is
the atmospheric pressure. The atmospheric pressure
at the top of the mountain.
Water boils when the vapour pressure is least the atmospheric pressure.
The atmospheric pressure is equal at the top of the mountain.
What is atmospheric pressure?The air around you has weight, and it presses against everything it touches. That pressure is called atmospheric pressure, or air pressure. It is the force exerted on a surface by the air above it as gravity pulls it to Earth.
As we go up in altitude the air pressure becomes less. When the pressure decreases, it takes less energy to get the water molecules to escape the surface. So the temperature is less than it would be at sea level.
Air pressure is higher or greater at the bottom of a mountain. This is because the height of the air above that level is thicker than at the top.
Pressure is given by the equation, P=rho*g*h, where rho is the air density, g is the gravity value and h is the thickness of the air layer on top of the level where we are considering the pressure.
Therefore, as we can see, at the bottom of the mountain, the thickness h of air is greater, and so is the pressure.
Hence, water boils when the vapour pressure is least the atmospheric pressure and the atmospheric pressure is equal at the top of the mountain.
Learn more about the atmospheric pressure here:
https://brainly.com/question/11484577
#SPJ2
1. To calculate the molarity of a solution, you need to know the moles of solute and the
O volume of the solvents
O mass of the solution
O volume of the solution
volume of the solute
Answer:
O volume of the solution
Explanation:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / volume of solution in L
For example:
if we dissolve the 1 mole of NaCl to make the solution of volume 2 L. The molarity of solution is,
M = 1 mol / 2 L
M = 0.5 M
what the correct answer
Answer:
Alkali metals are elements found in group 1 of the Periodic Table. Alkali metals are soft, malleable, ductile, and are good conductors of heat and electricity. They have low melting and boiling points compared to most other metals.
PLEASE HURRY
Which layer of Earth is the densest and why is that so?
A: The outer core is densest due to gravitational compression.
B: The outer core is densest due to generation of radiogenic heat.
C: The outer core is densest due to accretion.
C: The inner core is densest due to gravitational compression.
D: The inner core is densest due to generation of radiogenic heat.
Answer:
D
Explanation:
Answer: C: The inner core is densest due to gravitational compression
Explanation:
DUE VERY VERY VERY SOON
What are the rows of elements called on the periodic table?
Answer:
"The elements are arranged in seven horizontal rows, called periods or series, and 18 vertical columns, called groups."
Explanation:
I GIVE OUT FREE POINTS
0.00099989
3 sig figs, scientific notation
why is magneisum a metal
Answer:
Chemical element, metallic, symbol Mg, situated in group IIa in the periodic table, atomic number: 12, atomic weight: 24,312. ... Magnesium is known for a long time as the lighter structural metal in the industry, due to it's low weight and to it's capability of forming mechanically resistant alloys.