Answer:
A
Explanation:
The answer is A because Hydrogen is an Atom consists of 1 electron only.
Good luck
A car travels 65 miles in 1 hour. What is the average speed of the car?
what is the density of a liquid if it's volume is 125 mL and it's mass is 50g?
Answer:
0.4g/ml
Explanation:
density= mass/volume
density=50g/125ml
density=0.4g/ml
Which sentence best explains the relationship between pressure and the
solubility of a gas?
A. The greater the pressure, the more gas that will dissolve.
B. Solubility increases with pressure for some gases but not others.
C. The lower the pressure, the more gas that will dissolve.
D. Pressure has no effect on the solubility of gases.
Answer: A. The greater the pressure, the more of gas that will dissolve.
Explanation: Increasing pressure increases the solubility of gases. It has little effect on the solubility of liquids and solids.
What is an example for "chemical equations"?
Answer:
A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side.
Explanation:
A group of tourists were on an outing when they noticed that precipitation began to fall. The air temperature was 32 degree Fahrenheit. What type of precipitation did they most likely see?
Answer:
The correct answer is - rain.
Explanation:
At 32 degrees c or zero degrees Celsius, droplets of water in the atmosphere do not freeze as it is not the temperature at which water freezes but it is the temperature at which ice melts.
At this temperature the water changes its state, below 32 degrees Fahrenheit the water freezes but in the atmosphere, it not freezes necessarily and remains in the liquid state and called super-cooled liquid or water. Above this temperature, water in liquid state.
Thus, the precipitation is in the form of rain.
Which of the following has the larger atomic radius?
O Cs
O Ca
O Li
O Ba
Hope it helps
Electric circuit are a pathway for ____ to flow
A.) Neutrons
B.) Protons
C.) Matter
D.) Electrons
Answer:
Electrons
Explanation:
The source that gives the voltage (force) causes the electrons to move.
Answer:
The answer is Electron
Explanation:
A beaker containing 6.32 moles of PBr3, contains___
molecules of PBrz.
A) 1712.7
B) 3.1 x 10^24
C) 3.8 x 10^24
D) 271
Answer:
3.8 x 10²⁴molecules
Explanation:
Given parameters:
Number of moles = 6.32moles
Unknown:
Number of molecules = ?
Solution:
The number of moles can be used to derive the number of molecules found within a substance.
Now,
1 mole of substance contains 6.02 x 10²³ molecules
6.32 mole of PBr₃ will contain 6.32 x 6.02 x 10²³ = 3.8 x 10²⁴molecules
Hair is composed of a protein called cellulose
O
True
O False
Answer:True
Explanation:
Iv done this before
All of the alkaline earth metals are similar in that – they are all artificially made elements they all have similar atomic weights. they all have the same ionic charge. they all show variable valences.
Answer:
they all have the same ionic charge.
Explanation:
Alkaline earth metals are group 2 metals on the periodic table. They are divalent elements because they have two valence electrons and ionize by donating these two valence electrons. Elements in this group have the same numbers of electrons in their outermost shell of their atoms. i.e. they all have the same number of valence electrons and ionic charge.
where information about each element is located
Answer:
On the pereiodic table.
Explanation:
is bird seed homogeneous or heterogeneous
Answer:
heterogeneous
In order to give birds a varied and balanced diet, commercial bird seed blends typically include a range of seeds, grains, and other substances. As a result, bird seed is frequently categorised as a heterogeneous blend.
A seed is referred to as homogenous if its genetic makeup, size, shape, and other traits are all consistent. To guarantee consistency in the ensuing plants, these seeds are typically created through controlled breeding or genetic manipulation. A heterogeneous seed, on the other hand, is one that varies in genetic makeup, size, shape, and attributes. These seeds frequently result from cross-pollination or natural pollination between various species or kinds.
To know more about heterogeneous seed, here:
https://brainly.com/question/30583932
#SPJ6
The gas could be which of the following? Select all that apply. Hint: These gases are more dense than air. Nitrogen Neon Argon Carbon Dioxide Helium Hydrogen Propane Carbon Monoxide
Answer:
nitrogen, oxygen, carbon dioxide, argon, hydrogen, helium
Explanation:
What is atomic mass made of?
Answer:
Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number.
Explanation:
What is the percentage composition of each element in carbon dioxide, CO2? Remember percent composition is based on mass. (Show your calculations for full credit.)
%C = 27.3%
%O=72.7%
Further explanationProust states the Comparative Law that compounds are formed from elements with the same Mass Comparison, so that compounds have a fixed composition of elements
The empirical formula is the mole ratio of compounds forming elements.
MW CO₂ : 44 g/mol
Ar C = 12 g/mol
Ar O = 16
%C[tex]\tt \dfrac{12}{44}\times 100\%=27.3\%[/tex]
%O[tex]\tt \dfrac{2.16}{44}\times 100\%=72.7\%[/tex]
atoms are so small that approximately _________ of them can fit on the head of a needle?
Answer:
5 million
Explanation:
How much oxygen (O) is in 5.41 × 106 atoms of oxygen
Answer:
They show you how to do it sweetie
Explanation:
123456789 Common math
When an ionic bond forms what type of ions are joined?
Which best explains the difference between a monomer and a polymer?
A monomer is larger than a polymer.
A monomer contains carbon and a polymer does not.
A polymer contains carbon and a monomer does not.
A polymer is larger than a monomer.
The difference between the monomer and a polymer should be that monomer should be larger than a polymer.
Difference of monomer and a polymer?The monomer represent the molecule type where it has the capability for chemically the bond along with the other molecules with respect to the long chain. While the polymer should represent the chain of the non-specified the no of monomers.
Also, it represent the building blocks of polymers that contain more complex type of molecules
Learn more about polymer here: https://brainly.com/question/13209535
Answer:
A
Explanation:
Which model best represents a pattern?
Antenne UHF
Chaum
RTG
Master
Antenne
grand gain
DAN
REMS
RAD
SAM
Chemin
PLEASE HELP!!!!
7. According to Mohs Hardness scale, which of these groups of minerals can scratch fluorite? А. B. talc, calcite, and apatite calcite, quartz, and topaz apatite, orthoclase, and corundum diamond, gypsum, and quartz C.
Answer:
B
IS THE CORRECT ANSWER
By examining the diagram, which of the following is NOT needed for photosynthesis:
O sunlight
O carbon dioxide
O water
oxygen
0.45 g of hydrated sodium carbonate crystals were heated until 3.87 of anhydrous power remained.
How many moles of water are there in one mole of hydrated salt?
Formula of hydrated sodium carbonate : Na₂CO₃.10H₂O, so moles of water in one mole of hydrated salt = 10
Further explanationHydrate is a compound that binds water (H₂O), usually in the form of crystals/ solids
If these compounds are dissolved in water or heated, the hydrates can decompose:
Example: X.YH₂O (s) → X (aq) + YH₂O (l)
The formula for the hydrated compound contains: YH2O
The mole ratio shows the ratio of the coefficients of the hydrate compound
10.45 hydrated sodium carbonate(Na₂CO₃.xH₂O) were heated until 3.87 of 3.87of anhydrous (Na₂CO₃) remained, so
mass H₂O released :
[tex]\tt 10.45-3.87=6.58~g[/tex]
mass Na₂CO₃ = 3.87 g
mol ratio Na₂CO₃(MW= g/mol) : H₂O(MW=18 g/mol) =
[tex]\tt \dfrac{3.87}{105,9888}\div \dfrac{6.58}{18}=0.0365\div 0.3655=1\div 10[/tex]
If a metal donates or loses an electron it becomes a..
A. Ionic
B. Covalent
C. Metallic
Answer:
c
Explanation:
Answer:
the answer to your question is c
A neutral atom of beryllium (Be) has an average mass of 9 amu and 4 electrons. How many neutrons does it have?
13
5
9
4
Answer:
It has 5 neutrons
Explanation:
The fact that it is a neutral atom tells us that the number of electrons and protons is the same:
The problem tells us there are 4 electrons, thus there are 4 protons.The average mass of an atom is the sum of the number of protons and the number of neutrons:
Mass = # Protons + # NeutronsWith the above information in mind we can calculate the number of neutrons:
9 amu = 4 Protons + # Neutrons# Neurons = 5 NeutronsQuestion:
In a laboratory demonstration, a balloon filled with methane and oxygen was exposed to a
flame. The result was a brief, large flame. The students were asked to formulate an equation for
the reaction. One answer is below.
CH, + 0 = CO,
This equation is incorrect.
A. Explain how and why it is incorrect
B. What would the correct equation be, and how do you know that?
Answer:
The laboratory demonstration consists of the following;
The compounds present in the combustion reaction = Methane, CH₄ and Oxygen, O₂
The chemical equation for the combustion reaction is given as follows;
CH₄ + 2O₂ → CO₂ + 2H₂O
Therefore;
A. The equation given as CH₄ + O → CO₂ is not correct because;
1) Oxygen gas exist as diatomic molecules, O₂, and given that the experiment involves the mixture of gases, the oxygen gas present which can exist as a separate compound, should be represented as O₂
2) The number of oxygen molecules in the reaction is two rather than one
3) The product also includes two molecules of water (vapor) H₂O
B. The correct equation for the reaction should be given as follows;
CH₄ + 2O₂ → CO₂ + 2H₂O
B i) The constituents of the equation is obtained by the knowledge of the fact that the combustion reaction of an organic substance such as methane in the presence of oxygen yields, carbon dioxide and water (vapor)
The equation showing the relative amounts the reacting compounds is by balancing the basic equation of the combustion of methane in the presence of oxygen
Explanation:
The
the surface area of the reactants, the faster the reaction rate.
A. greater
B. lesser
True or False: Sulfur by itself isn't too bad, it's when it reacts with other elements that it can become dangerous
Answer:sulfer by itself is not pleasant and it can be dangerous by itself but in large amounts.
Explanation:
Answer:
True.
Explanation:
Also did you know that it is combined with chlorine that it becomes salt? Cool right? Two deadly things combining to become a condiment
How many liters will 90.0 grams of xenon gas (Xe) occupy at STP?
HELP PLEASE
Answer:
22.4L
Explanation:
not sure if its totally correct but I tried
What is the total number of electrons in an atom of an element with an atomic number of 18 and a mass number
of 40?
a. 58
c. 22
b. 18
d. 40
Answer:
18
Explanation:
In neutral atom protons and electrons are equal in number as it atomic number or proton number is 18 so electrons are also 18
The total number of electrons in an atom of an element with an atomic number of 18 and a mass number of 40 is 18.
What are the difference between atomic number and atomic mass ?Atomic mass can be defined as the total number of neutrons and protons located in nucleus of an element while atomic number is the number of protons present in the nucleus of element.
Atomic mass can be defined as the average weight of an element where as the atomic number is the total number of protons present in the nucleus; Atomic mass have the symbol A while atomic number have the symbol the letter Z.
Different isotopes of an element are differentiated by atomic mass is while isotopes share the same atomic number, in neutral atom protons and electrons are equal to atomic number or proton number is 18 and electrons are also 18
Learn more about atomic number, here:
brainly.com/question/8834373
#SPJ6