I WILL MARK YOU AS BRAINLIEST IF RIGHT
What is the magnitude of the net force acting on this object? And what direction?

Answer:

B. iron ore

Explanation:

Hope this helps

plz mark as brainliest!!!!!!

This question is incomplete

Complete Question

m1 is 10kg, m2 is 4.0kg. The coefficient of static friction between m1 and the horizontal surface is 0.50. and the Coefficient of kinetic friction is 0.30.

a) if the system is released from rest what will be its acceleration

Answer:

0.7 m/s²

Explanation:

The coefficient of static friction between m1 and the horizontal surface is 0.50. and the coefficient of kinetic friction is 0.30.

(a) if the system is released from rest what will be its acceleration

g = acceleration due to gravity = 9.81 m/s²

Coefficient of Kinetic Friction = μk = 0.30

m1 = 10kg

m2 = 4.0kg

The formula to solve question a is given as:

a = acceleration at rest

m2g- μk m1g = (m1+ m2) a

Making a the subject of the formula:

a = (m2g- μk×m1g )/(m1+ m2)

a = [(4.0 kg × 9.81m/s²) – (0.30 ×9.81 × 10) ]/(10+4)

a = 0.7 m/s²

Answer:

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

Explanation:

For this exercise we are going to solve it using conservation of energy to find the velocity of the body and the launch of projectiles to find the velocity to cross the well.

Let's start with the projectile launch

as the body leaves the vertical its velocity must be horizontal

         x = v₀ₓ t

         y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²

when reaching the ground its height of zero (y = 0) and the initial vertical velocity is zero

         t = √ 2 y₀ / g

we substitute

        x = vox √2y₀ / g

        v₀ₓ = √(g / 2y₀)     x

In the exercise, it tells us that the width of the well is D (x = D) and the initial height is the height of the platform minus the length of the rope (I = H - L)

       v₀ₓ = √(g /(2 (H -L))    D

this is the minimum speed to cross the well.

Now let's use conservation of energy

starting point. On the platform

      [tex]Em_{o}[/tex] = U = m g H

final point. At the bottom of the swing

      Em_{f} = K + U = 1 / 2m v² + m g (H -L)

as there is no friction the mechanical energy is conserved

        Em_{o} = Em_{f}

       m g H = 1 / 2m v² + m g (H -L)

        v = √ (2gL)

let's write our two equations

the minimum speed to cross the well

       v₀ₓ = √ (g /(2 (H -L))    D

the speed at the bottom of the oscillatory motion

       v = √ (2g L)

we analyze the extreme cases

* when L → H    chord too long

in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross

* when L → 0 very short string

         the speed of the platform is very small, so we do not have the minimum required value

        vox = √ (g / (2 (H)) D

From this analysis we see that there is a range of lengths that allows us to have the necessary speeds to cross the well

      V₀ₓ = v

      g / (2 (H -L) D² = 2g L

       4 L (H- L) = D²

        4 H L - 4 L2 - D² = 0

        L² - H L - D² / 4 = 0

let's solve the quadratic equation

      L = [H ± √ (H2-D2)] / 2

we assume that H> D

       L = ½ H [1 + - RA (1 - (D / H) 2)]

The two values ​​of La give the range of values ​​for which the two speeds are equal

A) The person lands in the moat if the rope's length is very short because :

B) The person lands in the moat if the rope length is similar to the height of the platform because :

Following the assumptions;

size of the person is much smaller than L and H

D = horizontal distance

Hence we can conclude that The person lands in the moat if the rope's length is very short because The speed of the platform is less than the required minimum speed  and  The person lands in the moat if the rope length is similar to the height of the platform because,the speed required to cross the moat approaches infinity.

Learn more about obstacle course : https://brainly.com/question/241926

Answer:

When a force is applied to the body, not only is the applied force acting, there are many other forces like gravitational force Fg, frictional force Ff and the normal force that balances the other force. Therefore, the net force formula is given by, FNet = Fa + Fg + Ff + FN.

Explanation:

Answer:

kinetic and potential energy

Explanation:

Answer:the answer is 3

Explanation:

Answer:

I do not understand what you are asking

Answer:

Situational Interview

Explanation:

A situational interview is about as close to the real job as it gets. During this type of interview, candidates may be presented with a visual or audio simulation of a scenario and asked to respond to it. They are asked to analyze a problem and profer suggestions on how they would handle it.

If the candidate has solved similar problems in the past, it will come to the fore.

If they haven't then the best outcome is that it will tell the interviewers how well the candidate is able to solve similar problems.

An example of a Situational Interview question is this:

How would you handle an angry customer who for no justifiable reason has decided to create a problematic scene to disrupt the business?

Because Situational Interviews are about behavioral responses (present, past, and future), they are powerful tools in determining or predicting future job performance. An interviewing technique that is developed using this methodology is called the S.T.A.R.

This is an acronym for Situation, Task, Action, Result.

Situation: the candidate is asked to present a challenging situation that occurred recently. This tests what the candidate sees as a challenging situation.

Task: The candidate based on the situation is asked to identify what they need to do to remedy the problem. This tells the interviewer(s) whether or not the candidate can think up a solution for the problem.

Action: Here they define the actual steps taken to resolve the problem

Result: The candidate against the above is required to give the result gotten

Action and Result tell the interviewer the quality of the candidate's ability to follow through and achieve the intended results. This also judges the quality of execution in terms of cost and time. The candidate with the lowest cost and time and the highest quality of outcome is considered the best.

Cheers

Answer:

C). Dinosaurs

Explanation:

Answer:

hhhhhhhh

Explanation:

This question is incomplete, the complete question is;

A block of mass m begins at rest at the top of a ramp at elevation h with whatever PE is associated with that height. The block slides down the ramp over a distance d until it reaches the bottom of the ramp.

How much of its original total energy (in J) survives as KE when it reaches the ground? m = 9.9 kg h = 4.9 m d = 5 m μ = 0.3 θ = 36.87°

Answer:

the amount of its original total energy (in J) that survives as KE when it reaches the ground will is 358.975 J

Explanation:

Given that;

m = 9.9 kg

h = 4.9 m

d = 5 m

μ = 0.3

θ = 36.87°

Now from conservation of energy, the energy is;

Et = mgh

we substitute

Et = 9.9 × 9.8 × 4.9

= 475.398 J

Also the loss of energy i

E_loss = (umg cosθ) d

we substitute

E_loss  = 0.3 × 9.9 × 9.8 × cos36.87°  × 5

= 116.423 J

so the amount of its original total energy (in J) that survives as KE when it reaches the ground will be

E = Et - E_loss

E = 475.398 J - 116.423 J

E = 358.975 J

Answer:

(a) The work done by the gas on the surroundings is, 17537.016 J

(b) The entropy change of the gas is, 73.0709 J/K

(c) The entropy change of the gas is equal to zero.

Explanation:

(a) The expression used for work done in reversible isothermal expansion will be,

where,

w = work done = ?

n = number of moles of gas  = 4 mole

R = gas constant = 8.314 J/mole K

T = temperature of gas  = 240 K

= initial volume of gas  =  

= final volume of gas  =  

Now put all the given values in the above formula, we get:

The work done by the gas on the surroundings is, 17537.016 J

(b) Now we have to calculate the entropy change of the gas.

As per first law of thermodynamic,

where,

= internal energy

q = heat

w = work done

As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.

So, at constant temperature the internal energy is equal to zero.

Thus, w = q = 17537.016 J

Formula used for entropy change:

The entropy change of the gas is, 73.0709 J/K

(c) Now we have to calculate the entropy change of the gas when the expansion is reversible and adiabatic instead of isothermal.

As we know that, in adiabatic process there is no heat exchange between the system and surroundings. That means, q = constant = 0

So, from this we conclude that the entropy change of the gas must also be equal to zero.

Explanation:

Answer:

Each box represents an element and contains its atomic number, symbol, average atomic mass, and (sometimes) name.

Explanation:

Answer:

An element's period and group

Answer:

A. Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.

Explanation:

Having results that do not support the hypothesis is a common occurrence.

Hypotheses always depend on the data and experiment. If at the end of an investigation the results do not support the hypothesis, the investigation should be be repeated to further confirm this discovery.

And if there is still no correlation, then the hypothesis is not a reasonable explanation for the investigation and should be modified or rejected if necessary.

Answer:

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

Explanation:

The spring constant is 2000 newtons per meter. Let consider the spring-block system, from Principle of Energy Conservation we can represent it by the following model:

[tex]U_{k,1}+K_{1} = U_{k,2}+K_{2}[/tex]

[tex]K_{2} = K_{1}+(U_{k,1}-U_{k,2})[/tex] (Eq. 1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final kinetic energies of the block, measured in joules.

[tex]U_{k,1}[/tex], [tex]U_{k,2}[/tex] - Initial and final elastic potential energy, measured in joules.

And we expand the equation above by definitions of elastic potential energy and kinetic energy:

[tex]\frac{1}{2}\cdot m \cdot v_{2}^{2} = \frac{1}{2}\cdot m\cdot v_{1}^{2} + \frac{1}{2}\cdot k\cdot (x_{1}^{2}-x_{2}^{2})[/tex]

[tex]v_{2} = \sqrt{v_{1}^{2}+\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2}) }[/tex] (Eq. 1b)

Where:

[tex]m[/tex] - Mass of the block, measured in kilograms.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final velocities of the block, measured in meters per second.

[tex]x_{1}[/tex], [tex]x_{2}[/tex] - Initial and final positions of spring, measured in meters.

If we know that [tex]v_{1} = 6\,\frac{m}{s}[/tex], [tex]k = 2000\,\frac{N}{m}[/tex], [tex]m = 2\,kg[/tex], [tex]x_{1} = 0\,m[/tex] and [tex]x_{2} = 0.15\,m[/tex], the final speed of the block moving at the instant the spring has been compressed is:

[tex]v_{2} = \sqrt{\left(6\,\frac{m}{s} \right)^{2}+\left(\frac{2000\,\frac{N}{m} }{2\,kg} \right)\cdot [(0\,m)^{2}-(0.15\,m)^{2}]}[/tex]

[tex]v_{2}\approx 3.674\,\frac{m}{s}[/tex]

The final speed of the block moving at the instant the spring has been compressed is approximately 3.674 meters per second.

1. Ohm's law shows the relationship between:

Formula: voltage = current x resistance

2. The negative charge on the hairbrush will induce a positive charge on your hair. As a result, your hair is going to be attracted to the hairbrush (and repelled by other strands of hair.)

3. V = IR, so if the resistance of the current increases, and the voltage of the current stays the same, there is as a result, going to be less current.

Best of Regards!

Answer:

The chair was pushed with 10 N.

Explanation:

The chair was pushed with 50 Joules.  

Work = Force * Distance

50 J = F * 5m  

F = 50 / 5 = 10N  

The chair was pushed with 10 N.

The chair was pushed with 10 N force.

Work is defined as the measure of energy transfer that occurs when an object is moved over a distance by an external force, at least part of which is applied in the direction of displacement.

If the force is constant then work can be calculated by multiplying the length of the path by the component of the force acting along the path, which is expressed mathematically as work W equal to the force f over a distance d, or W = fd.

So, for above given information,

Work done= 50 joules

Distance covered by the chair = 5m

Then, Force= W/d

=50/5= 10N

Thus, the chair was pushed with 10 N force.

Learn more about Work done, here:

https://brainly.com/question/13662169

#SPJ2

Answer:

The time is 1.4 sec

The initial velocity is 10.7 m/s.

Explanation:

Given that,

Height = 10 m

Distance = 15 m

We need to calculate the time

Using equation of motion

[tex]s=ut-\dfrac{1}{2}gt^2[/tex]

Put the value into the formula

[tex]10=0+\dfrac{1}{2}\times9.8\times t^2[/tex]

[tex]t^2=\dfrac{2\times10}{9.8}[/tex]

[tex]t=\sqrt{\dfrac{2\times10}{9.8}}[/tex]

[tex]t=1.4\ sec[/tex]

We need to calculate the initial velocity

Using formula of velocity

[tex]v=\dfrac{d}{t}[/tex]

Put the value into the formula

[tex]v=\dfrac{15}{1.4}[/tex]

[tex]v=10.7\ m/s[/tex]

Hence, The time is 1.4 sec

The initial velocity is 10.7 m/s.

Answer:

Hello your question is incomplete attached below is the complete question

answer : 49 seconds

Explanation:

considering only Hysteresis loss

we have to calculate the Area affected/under the  Hysteresis loss

= volume * area

= 4 * ( 1.5 * 20 ) =  120 tesla. A/m

next we calculate the volume of the material

= mass of material / density

= 500 grams / 7.9 g/cm^3  = 6.33 * 10^-5 m^3

next we calculate the heat lost per cycle

= 6.33 * 10^-5 m^3 * 120 = 0.007596 joules

The total heat required to raise  temperature by 1°c

= Cp * ΔT * n

= 3R * n * ΔT  = 3(8.314) * 8.95 * 1  = 223.23 Joules

where n = number of moles = 500grams / 55.85 = 8.95moles

ΔT = 1

Therefore the time required to have to operate at a frequency of 60 cps

= Total heat required  / heat lost per cycle

=( 223.23 / 0.007596 ) 60 cps

= 489.796 seconds ≈  49 seconds

Answer:

We are given:

initial velocity (u) = 12 m/s

final velocity (v) = 0 m/s

time taken (t) = 15 seconds

acceleration (a) = a m/s²

Solving for acceleration:

from the first equation of motion

v = u + at

replacing the variables

0 = 12 + (a)(15)

0 = 15a + 12

a = -12 / 15

a = -4 / 5 m/s²

Answer:

the box is going south at 10n

Explanation:

Answer:

9.05m/s

Explanation:

given data

m1= 2700kg

v1=3.7m/s

m2=0.18kg

v2=9.05m/s

v3=?

We know that the velocity of the rhino will remains unchanged after impact as the mass of the rubber ball is negligible

m1v1+m2v2=m1v1+m2v3

2700*3.7+0.18*9.05=2700*3.7+0.18*v3

9990+1.629=9990+0.18v3

9991.629-9990=0.18v3

1.629=0.18v3

v3=1.629/0.18

v3=9.05m/s

Answer:

2.096m/s

Explanation:

The speed of this soccer ball can be calculated using the formula;

Speed = distance/time

According to this question, the distance of the ball before it hits the tree is 6.5m, the time it takes is 3.1s, hence;

Speed = 6.5/3.1

Speed of the ball = 2.096m/s

Therefore, the speed of the ball before hitting the tree is 2.096m/s

Answer:You need to give more explanation sorry

Explanation:

Answer:

4.20 seconds

Explanation:

Supposing that silly goose weighs 69 pounds, we need to start on the math.

Simple maths, truly and really. 69/1=69, of course.

Therefore it will take 4.20 seconds for silly goose to hit the ground. if he is going to be a silly goose though, he can just go in the pond, instead of wasting his time.

Answer:

20000

Explanation:

Newtons Second law states that the force acting on an object is equal to its mass times its acceleration, f=ma. To solve for force, plug in your values for m and a, and then solve. f = (1000)*(20) = 20000

Explanation:

Let east = E, and, west = opposite to east = - E.

Here, displacement:

=> 2m east + 4m west + 1m east

=> 2E + 4(-E) + 1E

=> 2E - 4E + 1E

=> - 1E

=> 1(-E)

=> 1m west

And, distance,

=> 2m + 4m + 1m = 7m

The distance of a person is 7 m and the displacement of the person is 1m west.

To find the distance and displacement, the given values are,

A person walks 2.00 m east, then turns and goes 4.00 m west, then turns and goes back 1.00 m east.

Displacement:

Distance:

Let us consider East = E and west = opposite to east = - E.

Calculating the displacement:

= 2m east + 4m west + 1m east

= 2E + 4(-E) + 1E

= 2E - 4E + 1E

= - 1E

= 1(-E)

= 1m west.

The displacement is 1m west.

Now calculating the distance,

= 2m + 4m + 1m

= 7m

The distance is 7m.

Thus, the displacement and the distance is found as 1 m west and 7m.

Learn more about distance and displacement,

https://brainly.com/question/3243551

#SPJ6

Answer: the earth

Explanation: Earth exerts a gravitational pull on the moon 80 times stronger than the moon's pull on the Earth. Over a very long time, the moon's rotations created fiction with the Earth's tugging back, until the moon's orbit and rotational locked with Earth.

and that's why the earth pulls the moon

Answer:

Correct choice: D. Object A is the fastest

Explanation:

In a distance vs time graph, the distance is plotted vertically, and the time is plotted horizontally.

The diagram shows three graphs of objects A, B, and C.

The graph of A shows the object traveled 12 meters in 3 seconds, for a speed of 12/3= 4 m/s.

The graph of B shows the object traveled 8 meters in 4 seconds for a speed of 8/4=2 m/s.

Finally, the object C travels 4 meters in 4 seconds, for a speed of 4/4= 1 m/s

Thus, the fastest object is A.