Four peripheral hydrogen atoms and two singly-bonded nitrogen atoms make up the molecule of hydrazine.
Thus, It is a colourless, poisonous irritant and sensitizer in its anhydrous form, which harms the central nervous system and causes symptoms as severe as tumours and convulsions.
In addition to having a strong reducing agent that makes it highly explosive, hydrazine has a strong smell that is similar to that of ammonia.
Given this, it appears odd that over 100,000 metric tonnes of the substance are produced annually throughout the world. But hydrazine does have an impact on our daily activities. It can save our lives, give us food and clothing, keep us warm, and even transport us to the moon. It even has the ability to go back in time.
Thus, Four peripheral hydrogen atoms and two singly-bonded nitrogen atoms make up the molecule of hydrazine.
Learn more about Hydrazine, refer to the link:
https://brainly.com/question/1065759
#SPJ1
a) If the chemical formula for iron (III) chloride is FeCl 3 , what is the chemical formula for iron (III) nitrate?b) If the chemical formula for lead (II) oxide is PbO, what is the chemical formula for lead (II) sulfate?c) If the chemical formula for silver chloride is AgCl, what is the chemical formula for silver nitrate?
a) The chemical formula for iron (III) nitrate is Fe(NO₃)₃. b) The chemical formula for lead (II) sulfate is PbSO₄. c) The chemical formula for silver nitrate is AgNO₃.
In chemical nomenclature, the Roman numeral in the name of the compound indicates the oxidation state of the metal ion. To determine the chemical formula of a compound, it is important to balance the charge of the ions in the compound. In the case of iron (III) nitrate, the iron ion has a +3 charge and the nitrate ion has a -1 charge, so it takes three nitrate ions to balance the charge of the iron ion.
In the case of lead (II) sulfate, the lead ion has a +2 charge and the sulfate ion has a -2 charge, so it takes one lead ion and one sulfate ion to balance the charges. Similarly, in the case of silver nitrate, the silver ion has a +1 charge and the nitrate ion has a -1 charge, so it takes one of each to balance the charges.
To learn more about chemical formulas, here
https://brainly.com/question/11995171
#SPJ1
Determine what is wrong with (a), (b),(c),(d). Lewis structure and write the correct structure.
Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons.
In (a) the octet rule is not satisfied
In (b) Si does not satisfy the octet rule
In (d) N does not satisfy the octet rule
What is the Lewis structure?Every valence electron is represented as a dot, while pairs of shared electrons between atoms in a covalent connection are represented by lines.
The Lewis structure helps to predict the geometry and properties of a molecule, as well as the nature of the chemical bonds between atoms.
The issues with each of the Lewis structures have been shown above.
Learn more about Lewis structure:https://brainly.com/question/2030045
#SPJ1
Calculate the molar solubility, S , of CuS if it has a Ksp value of 6×10−37.
The molar solubility of CuS is 7.8 x 10⁻¹⁹ M.
The solubility product expression for CuS is:
Ksp = [Cu²⁺][S²⁻]Since CuS dissociates to form one Cu²⁺ ion and one S²⁻ ion, the molar solubility of CuS can be represented as x. Therefore, at equilibrium:
[Cu²⁺] = x[S²⁻] = xSubstituting these values in the Ksp expression:
Ksp = x²Solving for x, we get:
x = √(Ksp) = √(6 x 10⁻³⁷) = 7.8 x 10⁻¹⁹ MTherefore, the molar solubility of CuS is 7.8 x 10⁻¹⁹ M.
To learn more about molar solubility, here
https://brainly.com/question/28170449
#SPJ1
The complete question is:
Calculate the molar solubility, S , of CuS if it has a Ksp value of 6×10⁻³⁷.
HELP ME PLEASE!! I NEED HELP ANSWERING THESE!!
1) Indium and aluminum belong to the same group.
2) Barium belongs to groups 2 and 6
The periodic table is what?The compounds' names are;
Tetrachloro phosphorus chloride
Calcium bromide
Hexasulfur nitrogen
The following molecules balance the charges:
K3P, CaS, Al2O3
Chlorine and fluorine are elements of group 17
Magnesium and salt are the components that make up period 3.
The data are used to create the balanced equations;
Sn + 2H2O = SnO2 + H2
3O2 + 4Al = 2Al2O3
2Au + 3H2S = Au2S3 + 3H2
Learn more about periodic table:brainly.com/question/29769486
#SPJ1
Why are some Hydro flow rolling pins HFO refrigerants classified as a a2l
Hydro flow rolling pins HFO refrigerants classified as a A2L because they contain a fluorine.
Some Hydro Fluoro Olefin (HFO) refrigerants are classified as A2L according to the ASHRAE (American Society of Heating, Refrigerating, and Air-Conditioning Engineers) classification system for refrigerants. The "A" in A2L stands for "lower toxicity," and the "2" indicates "lower flammability."
The classification of refrigerants is based on their potential toxicity and flammability. A2L refrigerants are considered to have lower toxicity and lower flammability compared to other types of refrigerants. They have specific thermodynamic properties that make them suitable for use in refrigeration and air conditioning systems.
Fluorine makes HFO refrigerants less flammable than hydrochlorofluorocarbons (HCFCs) and hydrofluorocarbons (HFCs). which are highly flammable. A2L refrigerants have lower global warming potential (GWP) and ozone depletion potential (ODP), which makes them a more sustainable choice for certain applications.
To know more about refrigerants here
https://brainly.com/question/28265596
#SPJ1
Hydro flow rolling pins HFO refrigerants are a type of refrigerant used in air conditioning systems. The 'a2L' is a safety classification from ASHRAE that indicates these refrigerants are mildly flammable but have lower flammability. Such classifications are used for safety considerations.
Explanation:The Hydro flow rolling pins HFO refrigerants are designed for use in refrigeration and air conditioning systems. An HFO refrigerant is a hydrofluorolefin refrigerant; they are a new class of refrigerants that have a very low planet-warming potential.
The designation a2L is actually a safety classification set by ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) and it means that these refrigerants are mildly flammable but exhibit lower flammability. The '2' indicates that the refrigerant has low flammability and the 'L' means it has a lower burning velocity. These classifications inform technicians and engineers about the safety considerations they need to be aware of when handling and working with these substances.
Learn more about HFO refrigerants here:https://brainly.com/question/32754819
#SPJ11
In a coffee-cup calorimeter, 130.0 mL of 1.3 M NaOH and 130.0 mL of 1.3 M HCl are mixed. Both solutions were originally at 21.8°C. After the reaction, the final temperature is 30.5°C. Assuming that all the solutions have a density of 1.0 g/cm^3 and a specific heat capacity of 4.18 J/°C · g, calculate the enthalpy change for the neutralization of HCl by NaOH. Assume that no heat is lost to the surroundings or to the calorimeter.
H = ? kJ/mol
The heat capacity of a substance or system is defined as the amount of heat required to raise the temperature through 1°C. It is an extensive property and its value depends on the quantity of matter present.
The heat needed to raise the temperature of 1 gram of the substance through 1°C is the specific heat capacity.
Heat required is:
q = mc (T₂ - T₁)
m = V × ρ
q = (130 + 130) × 1.0 × 4.18 ( 30.5 - 21.8) = 9455.16 J
9455.16 J = 9.45516 kJ
To know more about heat capacity, visit;
https://brainly.com/question/29766819
#SPJ1
When you write the formula for sodium hydroxide, you do not have to put parentheses around the hydroxide polyatomic ion. However, when writing the formula for aluminum hydroxide, you must put parentheses around the hydroxide polyatomic ion. a) Write each formula. b) Explain why the parentheses are necessary for aluminum hydroxide.
(a). Sodium hydroxide: NaOH, aluminum hydroxide: [tex]Al(OH)_3[/tex]
(b). The parentheses are necessary for aluminum hydroxide because the hydroxide polyatomic ion has a subscript of 3, indicating that there are three hydroxide ions for every one aluminum ion.
a) The formula for sodium hydroxide is NaOH, and the formula for aluminum hydroxide is [tex]Al(OH)_3[/tex]
b) Aluminum hydroxide requires brackets because there are three hydroxide ions for every one aluminum ion, according to the hydroxide polyatomic ion's subscript of 3. Without the parentheses, it would be unclear whether the subscript of 3 applies to only the oxygen or to the entire hydroxide ion. By enclosing the entire hydroxide ion in parentheses and placing the subscript outside the parentheses.
To know more about aluminum ion, here
brainly.com/question/21373859
#SPJ1
You may have noticed that all the elements in the first column of the periodic table, the alkali metals, have a 1 charge when they combine with negative ions. Another group of positive ions are the alkaline earth metals located in the second column of the periodic table. What charge is typical for ions of the alkaline earth metals?
Answer:
The charge that is typical for ions of the alkaline earth metals is +2
Explanation:
Group 1 elements (alkali metals such as Li, Na, K...) all have one valence electron that they donate when forming ionic bonds. This will cause them to have a charge of +1.T he alkaline earth metals (Ca, Mg) have two valence electrons they donate which means their charge when forming ions is +2. The members of the aluminum family lose three electrons giving them a charge of +3.
can you please answer these
The balanced reactions are;
NH3 (aq) + HBr (aq) → NH4Br (aq)
PO4^3-(aq) + H3O^+(aq) ----> HPO4^2- (aq)+ H2O(l)
HS^-(aq) + OH^-(aq) ----> H2O(l) + S^2-(aq)
What is a conjugate acid/base?A conjugate acid/base pair consists of two species that are distinct from one another by one proton. The base is the species that can accept a proton, and the acid is the species that can donate a proton. When a base takes a proton, it changes into an acid, and when an acid gives a proton, it changes into a base.
In reaction (1) above, the conjugate acid of NH3 is NH4^+ while the conjugate base of HBr is Br^-.
Learn more about conjugate acid:https://brainly.com/question/31229565
#SPJ1
actetic acid only partially ionizes in water
Acetic acid only partially ionizes in water as it is a weak acid.
Weak Acids are the acids that do not completely dissociate into their constituent ions when dissolved in solutions.
When dissolved in water, an equilibrium is established between the concentration of the weak acid and its constituent ions.
Acetic acid, also known as ethanoic acid, is a weak acid with the chemical formula CH₃COOH. It is known to be the active component of vinegar.
Learn more about Weak acids, here:
https://brainly.com/question/22104949
#SPJ1
A sample of gas occupies 50.0L at 15.0 Cand 640.0 mmHg pressure. What is the volume at STP?
Answer:
2.00 L of a gas is collected at 25.0°C and 745.0 mmHg
Explanation:
Describe how to use Le Chatelier’s principle to predict the possible ways a chemical system can respond to changes.
When an equilibrium system is put under stress, Le Chatelier's principle may constitute used to forecast changes in equilibrium concentrations.
A rule that states that if a system is in equilibrium and a constraint is given to it (such as a change within pressure, temperature, or reactant concentration), the equilibrium will shift and tend to compensate for the effect caused by the constraint. This is Le Chatelier's principle.
When an equilibrium system is put under stress, Le Chatelier's principle may constitute used to forecast changes in equilibrium concentrations. However, the adjustments required to reach equilibrium might not be as evident if we have a combination of reactants and byproducts that are still not at equilibrium.
To know more about Le Chatelier's principle, here:
https://brainly.com/question/29009512
#SPJ1
Another component of acid rain is nitric acid, which forms when NO2, also a pollutant, reacts with oxygen and water according to the simplified equation 4NO2(g)+O2(g)+2H2O(l) → 4HNO3(aq) The generation of the electricity used in a medium-sized home produces about 16 kg of NO2 per year. Part A Assuming that there is adequate O2 and H2O, what mass of HNO3, in kg, can form from this amount of NO2 pollutant? Express the mass to two significant figures and include the appropriate units
The mass of [tex]HNO_3[/tex] that can form from 16 kg of [tex]NO_2[/tex] pollutant is 22 kg
The balanced equation for reaction between [tex]NO_2[/tex], oxygen, and water to form nitric acid :
[tex]4NO_2[/tex](g) + O2(g) + [tex]2H_2O[/tex](l) → [tex]HNO_3[/tex](aq)
Molar mass of [tex]NO_2[/tex] is 46.01 g/mol, so :
16 kg / 46.01 g/mol = 347.77 mol of [tex]NO_2[/tex]
We see that for every 4 moles of [tex]NO_2[/tex], 4 moles of [tex]HNO_3[/tex] are produced.
Therefore, number of moles of [tex]HNO_3[/tex] produced from 347.77 mol [tex]NO_2[/tex] is:
moles of [tex]HNO_3[/tex] =[tex]4/4 * 347.77\ mol = 347.77\ mol[/tex]
The mass of [tex]HNO_3[/tex] produced is:
mass of [tex]HNO_3[/tex] = 347.77 mol x 63.01 g/mol = 21.92 kg
Rounding to two significant figures and including the appropriate units, the mass of [tex]HNO_3[/tex] that can form from 16 kg of [tex]NO_2[/tex] pollutant is 22 kg.
To know more about balanced equation, here
brainly.com/question/7181548
#SPJ1
To measure the reaction heat more accurately at isobaric condition, what modification (s) would you suggest making on the coffee cup calorimeter ?
To measure the reaction heat more accurately at isobaric condition, we can add a lid to the calorimeter to prevent heat loss due to evaporation.
Thus, to measure the reaction heat more accurately at isobaric condition, some certain modifications can be made to the coffee cup calorimeter which includes adding a lid to the calorimeter to prevent heat loss due to evaporation to keep the pressure inside the calorimeter constant.
Using a magnetic stir bar to ensure even mixing of the reactants to ensure the accurate temperature readings, use of thermometer with a smaller stem to reduce the amount of heat transferred from the solution to the thermometer, etc. are some other modifications that can be made on the coffee cup calorimeter to measure the reaction heat more accurately at isobaric condition.
Learn more about the isobaric condition here:
https://brainly.com/question/13089696
#SPJ1
1. Calculate the % H₂O for each of the following hydrated metal salts?
1. Molecular formula: CaSO4 * 2 H₂O, % water: ???
2. Molecular formula: CoCl2 * 6 H₂O, % water: ???
3. Molecular formula: CuSO4* 5 H2O, % water: ???
4. Molecular formula: MgSO4 * 7 H₂O, % water: ???
2. Based on your Experimental Calculations from the Data Sheet, what is the identity of
your unknown. (Choose from one of the four choices above).
3. What is the % error? (Use only one of your trials for your calculation.)
The percentage composition of the water of hydration for each compound is shown below.
Percentage of water of hydrationThe percentage of water of hydration, also known as percent water of crystallization, is a measure of the amount of water that is chemically bound to a salt or other compound as part of its crystal structure.
1) For CaSO4 * 2 H₂O
36/172 * 100/1
= 21%
For CoCl2 * 6 H₂O
108/238 * 100/1
= 45%
For CuSO4* 5 H2O
90/250 * 100/1
= 36%
For MgSO4 * 7 H₂O
126/246 * 100/1
= 51%
Learn more about hydration :https://brainly.com/question/14229407
#SPJ1
A chemist wants to make a 17.85 %(m/m) solution of NaCl using a only 50.0 g of the salt. How much water is needed to make the solution? Numerical answer only. No units.
The mass percentage is an important method which is used to calculate the concentration of a solution. The amount of water needed to add in order to make 17.85 % NaCl solution is 230.1 g.
What is mass percentage?The mass percentage of a component in a solution is defined as the mass in grams of that component present per 100 g of the solution. The term mass percentage is denoted as w/w. It is used to calculate the concentration of a binary solution.
Mass percentage = Mass of the component in the solution / Total mass of solution × 100
17.85 = 50.0 / 50.0 + x × 100
0.1785 (50.0 + x) = 50.0
8.925 + 0.1785 x = 50.0
0.1785 x = 41.075
x = 230.1 g
Thus the amount of water added to make the solution is 230.1 g.
To know more about mass percentage, visit;
https://brainly.com/question/27429978
#SPJ2
WILL MARK BRAINLIEST
Potential in a different kind of cell.
A typical mammalian cell at 37
∘
C, with only potassium channels open, will have the following equilibrium:
K+ (intracellular) ⇌ K+ (extracellular),
with an intracellular concentration of 150 mM K+, and 4.0 mM K+ in the extracellular fluid.
What is the potential, in volts, across this cell membrane? Note: in this case, n = the charge on the ion, and Eo for a concentration cell = 0.00 V. Please explain how to solve
Answer:
the potential across this cell membrane is -0.082 volts, with the inside of the cell being negative relative to the outside.
Explanation:
The Nernst equation can be used to calculate the equilibrium potential (in volts) for a given ion across a membrane, given the concentration of the ion inside and outside the cell:
E = (RT/zF) ln([ion]out/[ion]in)
where E is the equilibrium potential, R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin (37+273=310 K), z is the charge on the ion (+1 for K+), F is the Faraday constant (96,485 C/mol), [ion]out is the extracellular concentration of the ion (4.0 mM for K+), and [ion]in is the intracellular concentration of the ion (150 mM for K+).
Plugging in these values:
E = (8.314310/196485) ln(4.0/150)
E = -0.082 V
Therefore, the potential across this cell membrane is -0.082 volts, with the inside of the cell being negative relative to the outside.
The formation of magnesium bromide from Mg and Br2 is represented in the particle diagram. Which of the following statements about the reaction is correct?
Based on the particle diagram provided and the given statements, the correct statement about the reaction is; Mg is oxidized because it loses two electrons as it forms Mg²⁺. Option A is correct.
In the particle diagram, Magnesium (represented as Mg) loses two electrons, indicated by the arrows pointing away from the Mg particle. This means that Mg undergoes oxidation, as it loses electrons and its oxidation state increases from 0 to +2 when it forms Mg²⁺. Oxidation is defined as the loss of electrons or an increase in oxidation state.
On the other hand, Br₂ (represented as Br Br) gains two electrons, indicated by the arrows pointing towards the Br Br particles. This means that Br₂ undergoes reduction, as it gains electrons and its oxidation state decreases from 0 to -1 when it forms Br⁻. Reduction is defined as the gain of electrons or a decrease in oxidation state.
Hence, A. is the correct option.
To know more about particle diagram here
https://brainly.com/question/28027727
#SPJ1
--The given question is incomplete, the complete question is
"'Mg Br Mg? Br Br Br The formation of magnesium bromide from Mg ad Brz is represented in the particle diagram. Which of the following statements about the reaction is correct? A) Mg is oxidized because it loses two electrons as it forms Mg²⁺? B) Mg is reduced because it gains two electrons as it forms Mg? C) Br is oxidized because it gains an electron as it forms Br Br is reduced because it loses proton as it forms Br J3DE'."--
Answer: Mg is oxidized because it loses two electrons as it forms Mg²⁺
Explanation:
Why are Plinian eruptions more violent than Hawaiian eruptions?
OA. Plinian volcanoes have more viscous magma.
B. Hawaiian volcanoes are made of limestone instead of granite.
OC. Hawaiian volcanoes have less magma.
OD. Plinian volcanoes have stronger rocks.
The equilibrium constant, K, for the synthesis of ammonia
N₂(g) + 3H₂(g) <—>2NH3(g)
is approximately 44005 at 127 °C.
What is the value of K, for the decomposition of ammonia at 127 °C, as described by the following equation?
NH3 (g)<—> 1/2N₂(g) + 3/2 H₂(g)
The value of K, for the decomposition of ammonia at 127 °C is 2.27x10⁻⁵
Understanding Equilibrium ConstantThe Equilibrium Constant is denoted by K and it is a quantitative measure of the extent to which a chemical reaction reaches equilibrium.
It is defined as the ratio of the concentrations (or partial pressures) of the products to the concentrations (or partial pressures) of the reactants, with each concentration or partial pressure raised to a power equal to its stoichiometric coefficient in the balanced chemical equation.
For a general chemical equation:
aA + bB ⇌ cC + dD
The equilibrium constant expression is written as:
K = [tex]\frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]
where [A], [B], [C], and [D] represent the molar concentrations (or partial pressures) of the reactants and products at equilibrium, and a, b, c, and d represent their stoichiometric coefficients in the balanced chemical equation.
Back to our main question, the equilibrium constant for the reverse reaction (decomposition of ammonia) can be obtained from the equilibrium constant of the forward reaction (synthesis of ammonia) using the relationship:
Kreverse = 1 / Kforward
where Kforward is the equilibrium constant for the synthesis of ammonia.
Substituting the given value of Kforward:
Kreverse = 1 / 44005 = 0.0000227
In standard form, we have 2.27x10⁻⁵
Learn more about equilibrium constant here:
https://brainly.com/question/3159758
#SPJ1
et D Q.No. 9 Convert 1-bromopropane to 2-bromopropane.[2]
1-bromopropane can be converted to 2-bromopropane through a substitution reaction with sodium iodide in acetone.
Conversion of 1-bromopropane to 2-bromopropaneOne possible method to convert 1-bromopropane to 2-bromopropane is through a substitution reaction with sodium iodide (NaI) in acetone. The following procedure can be followed.
Dissolve 1-bromopropane and sodium iodide in dry acetone in a round-bottom flask.Reflux the mixture for several hours with stirring and heating to about 50-60°C. This allows for the formation of an alkyl iodide intermediate.After cooling the reaction mixture, add water to it and extract the organic layer with a separating funnel.Dry the organic layer with anhydrous sodium sulfate (Na2SO4) and filter it to remove any solid impurities.Concentrate the organic layer by distillation under reduced pressure to obtain 2-bromopropane as a product.More on 1-bromopropane can be found here: https://brainly.com/question/31149600
#SPJ1
Select the correct answer. What effect does increasing the temperature have on a reaction? A. The rate constant and reaction rate are both decreased. B. The rate constant and reaction rate are both increased. C. The rate constant is increased and the reaction rate is decreased. D. The rate constant is decreased and the reaction rate is increased.
Answer:
The correct answer is B
Explanation:
The rate constant and reaction are both increased
Choose the best term or phrase to fill in the blanks in the sentences below. Not all answer choices will be used. Question 10 options: (2) The probability that these parents will have an offspring affected with sickle cell anemia is ______ percent. (3) The probability that their offspring would also be a carrier like them is ______ percent (1) The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be ______________.
The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be carrier.
The scientific study of inheritance and genes is covered in this page, along with details on the structure of DNA, chromosomes, gene variants, and the evolution of living beings and their genomes.
(1) The image shows the cross between two parents who are carriers for sickle cell anemia, a recessive genetic disorder that affects the red blood cells in humans. Both parents are considered to be carrier. (2) The probability that these parents will have an offspring affected with sickle cell anemia is 50 percent. (3) The probability that their offspring would also be a carrier like them is 50 percent.
To know more about genetic, here:
https://brainly.com/question/30459739
#SPJ1
Trimethylamine is a weak base. A 0.150 M solution of trimethylamine has a pH of 11.5.
What is Kb for trimethylamine?
Kb for trimethylamine is 1.0 × 10^-2.5.
We can use the relationship between Kb and Ka for a conjugate acid-base pair:
Kb × Ka = Kw
The pKa is related to the pH :
pKa + pKb = 14.00
pKb = 14.00 - pKa
We can calculate the pKa using the relationship:
pH = pKa + log([base]/[acid])
Therefore, [base] = [acid], and we can simplify equation to:
pH = pKa + log(1)
Therefore, the pKa of trimethylammonium ion is 11.5.
Now :
Kb × Ka = Kw
Kb = Kw ÷ Ka
Since we know that Kw = [tex]1.0 * 10^{-14[/tex]and Ka =[tex]10^{-11.5[/tex] (from the pKa value we calculated earlier), we can substitute these values to get:
[tex]Kb = (1.0 * 10^{-14}) / (10^{-11.5}) = 1.0 * 10^{-2.5[/tex]
To know more about trimethylamine, here
brainly.com/question/14980991
#SPJ1
A reaction vessel contains an equilibrium mixture of SO2, O₂, and SO3. The reaction proceeds such that:
2SO₂(g) + O₂(g) <—>2SO3 (g)
The partial pressures at equilibrium are:
PS0₂ = 0.002318 atm
PO2 = 0.002930 atm
PS03 = 0.0166 atm
Calculate alp for the reaction
The Kp of the reaction is seen to be 1.75 * 10^4
What is the equilibrium constant?A high Kp value indicates that the equilibrium is in favor of the products, whereas a low Kp value suggests that the equilibrium is in favor of the reactants.
The relative concentrations of reactants and products at equilibrium are shown by the equilibrium constant.
We know that;
Kp = pSO3^2/pO2 . pSO2^2
Kp =(0.0166)^2/ 0.002930 (0.002318)^2
Kp = 2.8 * 10^-4/1.6 * 10^-8
Kp = 1.75 * 10^4
The Kp of the reaction is gotten as 1.75 * 10^4.
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
explain the shapes of simple molecules
Answer:
Simple molecules, also known as covalent molecules, are made up of two or more non-metal atoms that share electrons to form a covalent bond. The shape of a simple molecule is determined by the arrangement of its atoms in space, which is influenced by the number of electron pairs surrounding the central atom and the repulsion between them.
In general, there are two types of electron pairs: bonding pairs and non-bonding pairs (also known as lone pairs). Bonding pairs are shared between two atoms and create a strong bond that holds the molecule together. Non-bonding pairs are not shared and exert a repulsive force on the other electron pairs in the molecule.
The repulsion between electron pairs determines the shape of the molecule. For example, if a molecule has two electron pairs (a bonding pair and a non-bonding pair), they will arrange themselves as far apart as possible, which results in a linear shape. If a molecule has three electron pairs (two bonding pairs and one non-bonding pair), they will arrange themselves in a trigonal planar shape. If a molecule has four electron pairs (three bonding pairs and one non-bonding pair), they will arrange themselves in a tetrahedral shape.
Overall, the shape of a simple molecule is determined by the number of electron pairs and the repulsion between them.
2 Pretest Unit 5 Question 22 of 30 Why are there so many carbon-based compounds? O A. Carbon can form compounds with any other element in the periodic table except noble gases. OB. Carbon can form up to six bonds with other carbon atoms and atoms of other elements. OC. Carbon can form single, double, or triple bonds and can bond with itself and other elements. D. Carbon can form ionic, covalent, and metallic compounds under the right conditions. ZA
The why there are so many carbon-based compounds is that B. Carbon can form up to six bonds with other carbon atoms and atoms of other elements.
What is the uniqueness of carbon?Carbon can be described as the element that posses 4 electrons in its outermost shell, and it has the asbility to gain or loss 4 electrons to so it can have nobel gas configuration.
It should be noted that Catenation is one of the unique ability of carbon which help it to form bonds with other atoms of carbon and due to this reason, it have the ability to record a long chains of different types of compounds.
Learn more about carbon at:
https://brainly.com/question/1301348
#SPJ1
40n and 53n what is the magnitude of the net force on the crate
The magnitude of the net force on the crate is 13 N.
Generally, in science, the word 'force' has a very precise meaning. Force is usually described as a push or a pull.
Generally the magnitude of the force is described as the number which is used to represent the strength of the force. Let's consider an example, suppose the force is equal to 10 N towards the east direction and 'towards east' indicates direction while '10' indicates the magnitude of the force. So we can say that basically, Magnitude is the 'value' or 'amount' of any physical quantity.
Here, assuming that the two forces are acting opposite,
Net force = 53 N - 40 N = 13 N
The given question is incomplete and the complete question is given in the image attached below.
Learn more about force from the link given below.
https://brainly.com/question/13191643
#SPJ1
9.0 mol Al reacts with 6.0 mol O2 to
form Al2O3 according to the
reaction below:
4A1+302 → 2Al2O3
How many moles of Al2O3 form from
6.0 mol O2?
[?] mol Al₂O3
Round your answer to the tenths place.
mol ALO
HELP PLS TO MOVE ON !!
4.0 moles of Al₂O₃ will be form from 6.0 moles of O₂.
How to solve for the amout that would form oxygen(2 moles Al₂O₃) / (3 moles O₂)
= (x moles Al₂O₃) / (6.0 moles O₂)
To solve for x, we can cross-multiply:
(2 moles Al₂O₃) * (6.0 moles of O₂)
= (3 moles of O₂) * (x moles of Al₂O₃)
12.0 moles Al₂O₃ = 3x moles Al₂O₃
Now, divide both sides by 3:
x = 4.0 moles Al₂O₃
So, 4.0 moles of Al₂O₃ form from 6.0 moles of O₂.
Read more on chemical reactions here:https://brainly.com/question/11231920
#SPJ1
A test tube with a cell length of 2.0 cm is filled with a solution that has a molar absorptivity of 0.47 L/(mol*cm)* and a concentration 0.215 M. What should this solutions absorbance be?
/*hint, this L/(mol*cm) is just the unit of molar absorptivity. It will not be included in the calculation
The molar absorptivity of the solution is 1.093 L/(mol*cm).
What is the absorbance of a solution?The Beer-Lambert rule, which states that absorbance is equal to molar absorptivity (a constant that indicates how strongly a material absorbs light) times the substance's concentration times the length of the light's passage through the solution, describes this relationship.
We know that we can use the formula;
A = εcl
A = Absorbance
ε = absorptivity
c = concentration
l = path length
ε= A/cl
ε= 0.47/0.215 * 2
ε = 1.093 L/(mol*cm)
Learn more about absorbance:https://brainly.com/question/29439014
#SPJ1