Answer:
Water can hold a lot of heat inside it and as the climate starts getting cold, the water releases the heat which heats up the climate
Due to the fact that water has a high heat capacity, its temperature has a very limited range, which causes the coastal areas close to having a similar small daily and seasonal temperature range.
What is specific heat capacity?"When the temperature of a material rises 1 K (or 1 °C), the amount of heat (J) absorbed per unit mass (kg)".
When the weather begins to grow chilly, water releases the heat it has stored inside, warming the environment.
High specific heat of the water makes it temperature resistant, and it helps the earth to maintain its temperature and helps organisms to maintain their functions at a constant temperature of the earth.
Thus, the normal temperature is necessary for maintaining the temperature of the earth and the water bodies maintain the temperature of the earth.
To learn more about specific heat capacity, refer to the link:
https://brainly.com/question/13845112
#SPJ2
The cause of the phases of the moon Is a cycle that is close to - long
Answer: 28 days.
Hope this helps...... Stay safe and have a Merry Christmas!!!!!!!!! :D
a compared of magnesium nitric contains 72% of magnesium and 28% of nitrogen. what is the empirical formula of magnesium nitric.
and the answer is Mg 3 N 2
how to do the solution.
The empirical formula is the smallest comparison of atoms of compound =mole ratio of the components
The principle of determining empirical formula
• Determine the mass ratio of the constituent elements of the compound.
• Determine the mole ratio by dividing the percentage by the atomic mass
The empirical formula :
mol ratio Mg : N ⇒
[tex]\tt =\dfrac{72}{24~g/mol}\div \dfrac{28}{14~g/mol}\\\\=3\div 2\rightarrow Mg_3N_2[/tex]
What is the name of the following chemical compound?
Answer:
Iron(II) oxide
Explanation:
Iron(II) oxide or ferrous oxide is the inorganic compound with the formula FeO. Its mineral form is known as wüstite.
What Group would this element be in?
Answer:
Non-metals because it has 9 electrons meaning it is fluorine
Explanation:
True or False: Sulfur by itself isn't too bad, it's when it reacts with other elements that it can become dangerous
Answer:sulfer by itself is not pleasant and it can be dangerous by itself but in large amounts.
Explanation:
Answer:
True.
Explanation:
Also did you know that it is combined with chlorine that it becomes salt? Cool right? Two deadly things combining to become a condiment
A beaker containing 6.32 moles of PBr3, contains___
molecules of PBrz.
A) 1712.7
B) 3.1 x 10^24
C) 3.8 x 10^24
D) 271
Answer:
3.8 x 10²⁴molecules
Explanation:
Given parameters:
Number of moles = 6.32moles
Unknown:
Number of molecules = ?
Solution:
The number of moles can be used to derive the number of molecules found within a substance.
Now,
1 mole of substance contains 6.02 x 10²³ molecules
6.32 mole of PBr₃ will contain 6.32 x 6.02 x 10²³ = 3.8 x 10²⁴molecules
I need help please and thank you
Answer:
ooooooooooooooooooh i dont know this one
Explanation:
im not good a math at all
Which model best represents a pattern?
Antenne UHF
Chaum
RTG
Master
Antenne
grand gain
DAN
REMS
RAD
SAM
Chemin
What is the total number of electrons in an atom of an element with an atomic number of 18 and a mass number
of 40?
a. 58
c. 22
b. 18
d. 40
Answer:
18
Explanation:
In neutral atom protons and electrons are equal in number as it atomic number or proton number is 18 so electrons are also 18
The total number of electrons in an atom of an element with an atomic number of 18 and a mass number of 40 is 18.
What are the difference between atomic number and atomic mass ?Atomic mass can be defined as the total number of neutrons and protons located in nucleus of an element while atomic number is the number of protons present in the nucleus of element.
Atomic mass can be defined as the average weight of an element where as the atomic number is the total number of protons present in the nucleus; Atomic mass have the symbol A while atomic number have the symbol the letter Z.
Different isotopes of an element are differentiated by atomic mass is while isotopes share the same atomic number, in neutral atom protons and electrons are equal to atomic number or proton number is 18 and electrons are also 18
Learn more about atomic number, here:
brainly.com/question/8834373
#SPJ6
*please be serious *
What is one way active transport is different from diffusion ?
Answer:
Explanation:
During active transport, molecules move from an area of low concentration to an area of high concentration. This is the opposite of diffusion, and these molecules are said to flow against their concentration gradient.
how does atomic radius affect coulombic attraction?
Which is the correct Lewis dot structure for BeH2 ?
The correct Lewis dot structure for [tex]BeH_2[/tex] is Be : H : H
What does the Lewis dot structure show?The Lewis dot structure shows the valence electrons as dots. The valence electrons of beryllium are shown as 2 dots on the left side of the atom.
The central atom, beryllium, has 2 valence electrons where each hydrogen atom has 1 valence electron. To form a stable molecule, beryllium shares its 2 valence electrons with the 2 hydrogen atoms, each of which shares its 1 valence electron with beryllium which gives each atom a full outer shell of electrons.
Learn more about Lewis dot structure at:
https://brainly.com/question/28652824
#SPJ6
where information about each element is located
Answer:
On the pereiodic table.
Explanation:
Anyone know the answer
Answer:
a and d
Explanation:
a bromine and the calcium atom loses two elections
By examining the diagram, which of the following is NOT needed for photosynthesis:
O sunlight
O carbon dioxide
O water
oxygen
Which best explains the difference between a monomer and a polymer?
A monomer is larger than a polymer.
A monomer contains carbon and a polymer does not.
A polymer contains carbon and a monomer does not.
A polymer is larger than a monomer.
The difference between the monomer and a polymer should be that monomer should be larger than a polymer.
Difference of monomer and a polymer?The monomer represent the molecule type where it has the capability for chemically the bond along with the other molecules with respect to the long chain. While the polymer should represent the chain of the non-specified the no of monomers.
Also, it represent the building blocks of polymers that contain more complex type of molecules
Learn more about polymer here: https://brainly.com/question/13209535
Answer:
A
Explanation:
A car travels 65 miles in 1 hour. What is the average speed of the car?
Hair is composed of a protein called cellulose
O
True
O False
Answer:True
Explanation:
Iv done this before
PHYSICAL SCIENCE PLEASE PLEASE HEP DUE TODAY AT 11!! will give brainly if its correct!! <3333 thank you so muchh!!
Which problem cannot be solved using the scientific method?
determining which student reads faster
discovering who invented the radio
discovering how much salt should be used to boil water faster
determining which laundry detergent works best
Answer:
I would say discovering who invented the radio.
Explanation:
The other ones can be solved by experiments and the "discovering who invented the radio" cannot be solved by an experiment.
hope this helps.
Answer:
I would say who invented the ratio
Explanation:
Well you dont need to use the scientific method to know WHO discovered it, you use it to determine HOW
atoms are so small that approximately _________ of them can fit on the head of a needle?
Answer:
5 million
Explanation:
Which sentence best explains the relationship between pressure and the
solubility of a gas?
A. The greater the pressure, the more gas that will dissolve.
B. Solubility increases with pressure for some gases but not others.
C. The lower the pressure, the more gas that will dissolve.
D. Pressure has no effect on the solubility of gases.
Answer: A. The greater the pressure, the more of gas that will dissolve.
Explanation: Increasing pressure increases the solubility of gases. It has little effect on the solubility of liquids and solids.
3. Why do gases deviate from the ideal gas law at high pressures? A. Molecules have finite volume. B. Cohesive forces increase the volume from the ideal. C. Increasing pressure increases the temperature of the gas. D. Collisions between molecules occur more frequently as pressure increases.
Answer:
A. Molecules have finite volume.
Explanation:
Gases deviate from the ideal gas law at high pressures because its molecules have a finite volume.
Real gases have a finite volume which enables more interaction between the molecules while ideal gases are assumed not to have a finite volume or occupy space which is why it lacks any form of interaction between its molecules.
This difference is the deviation between the real and ideal gases.
How many liters will 90.0 grams of xenon gas (Xe) occupy at STP?
HELP PLEASE
Answer:
22.4L
Explanation:
not sure if its totally correct but I tried
Why does an ionic bond transfer electrons instead of sharing?
When there is a whole transfer of valence electron between the atoms is called an ionic bond. In this type of bond construction, the atoms get contrarily charged.
The ionic bonds are formed due to electronegativity. According to Pauling, the capability of an atom to draw electrons towards itself is called electronegativity.
When there is a huge contrast in electronegativity between the atoms, the electrons are completely transferred between the atoms.
The atom that relinquishes an electron are called a cation and is positive whereas the atom that acquires an electron are called anions and are negatively charged.
Therefore, due to electronegativity, ionic bonds are formed.
To learn more about ionic bonds follow the link:
https://brainly.com/question/14484184
A group of tourists were on an outing when they noticed that precipitation began to fall. The air temperature was 32 degree Fahrenheit. What type of precipitation did they most likely see?
Answer:
The correct answer is - rain.
Explanation:
At 32 degrees c or zero degrees Celsius, droplets of water in the atmosphere do not freeze as it is not the temperature at which water freezes but it is the temperature at which ice melts.
At this temperature the water changes its state, below 32 degrees Fahrenheit the water freezes but in the atmosphere, it not freezes necessarily and remains in the liquid state and called super-cooled liquid or water. Above this temperature, water in liquid state.
Thus, the precipitation is in the form of rain.
The
the surface area of the reactants, the faster the reaction rate.
A. greater
B. lesser
Question 20 (1 point)
The chemical formula for glucose, a simple sugar, is CH1206. The formula for ethanol is CzH60. What
accounts for the differences in these compounds?
Answer:
A. The ratio of the element in glucose is different than in ethanol
Explanation:
The compounds given are;
Glucose C₆H₁₂O₆
Ethanol C₂H₆O
The two compounds given are different from one another. But they have the same elemental composition.
Ethanol is made up of Carbon, hydrogen and Oxygen and so also, Glucose
Now,
The number of atoms in both compounds are different;
Number of atoms
C H O
Glucose 6 12 6
Ethanol 2 6 1
Advantages and disadvantages of solar power
Answer:
Advantakes= it is a renewable source, you can but it anywhere with sunlight
disatvantage= it cost a lot to place/replace, it uses a lot of different materials
if you drop soap on the floor is the soap dirty or is the floor clean?
Answer:
hahahaha the soappp is dirty and the floor gets clean
All of the alkaline earth metals are similar in that – they are all artificially made elements they all have similar atomic weights. they all have the same ionic charge. they all show variable valences.
Answer:
they all have the same ionic charge.
Explanation:
Alkaline earth metals are group 2 metals on the periodic table. They are divalent elements because they have two valence electrons and ionize by donating these two valence electrons. Elements in this group have the same numbers of electrons in their outermost shell of their atoms. i.e. they all have the same number of valence electrons and ionic charge.