Answer:
5
Explanation:
Question 6 (10 points)
The Washington Monument in our nation's capital is 555 ft high. Neglecting the effects of air resistance, what would be the
speed of the penny as it "hit" the ground?
оа
Ob
Oc
Od
48.3 m/s
-68.4 m/s
84.7 m/s
-57.6 m/s
Answer:
a= g = - 9.81 m/s2.
The following equations will be helpful:
a = (vf - vo)/t d = vot + 1/2 at2 vf2 = vo2 + 2ad
When you substitute the specific acceleration due to gravity (g), the equations are as follows:
g = (vf - vo)/t d = vot + 1/2 gt2 vf2 = vo2 + 2gd
If the object is dropped from rest, the initial velocity ("vi") is zero. This further simplifies the equations to these:
g = vf /t d = 1/2 gt2 vf2 = 2gd
The sign convention that we will use for direction is this: "down" is the negative direction. If you are given a velocity such as -5.0 m/s, we will assume that the direction of the velocity vector is down. Also if you are told that an object falls with a velocity of 5.0 m/s, you would substitute -5.0 m/s in your equations. The sign convention would also apply to the acceleration due to gravity as shown above. The direction of the acceleration vector is down (-9.81 m/s2) because the gravitational force causing the acceleration is directed downward.
hope this info helps you out!
Which three characteristics do mechanical waves and electrocmagnetic
waves share?
A. The waves begin with a disturbance.
O B. The waves transfer energy from its source.
C. The waves and their energy move outward from the source.
D. The waves and their energy can travel through empty space.
Answer:
It is A, B, and C
Explanation:
I just took the test!
The three characteristics mechanical waves and electromagnetic waves share are:
A. The waves begin with a disturbance.
B. The waves transfer energy from its source.
C. The waves and their energy move outward from the source.
What are mechanical waves and electromagnetic waves?Usually, waves transfer energy from one place to another. Mechanical waves transfers via matter where as electromagnetic waves transfers via light. Both mechanical waves and electromagnet (light) waves measured through amplitude, wavelength, frequency and both will get transmitted, refracted, reflected, absorbed, diffracted when they react with matter. Both the electromagnetic waves and mechanical waves are transverse in nature but the mechanical waves can also be in longitudinal.
So, many characteristics were similar for mechanical waves and electromagnetic waves.
Hence, Option A, B, C are the three characteristics.
Learn more about the waves,
https://brainly.com/question/3101711
#SPJ5
If the atomic weight- # of protons = # of neutrons, then how many neutrons does neon have?
Answer:
atomic weight 20.180
protons 10
neutrons 2,8
Explanation:
What are the two things that make up water?
Answer:
hydrogen and oxygen (H2O)
Explanation:
thank u for the points i really appreciate it :3
You use a lever to lift a heavy tree branch. You apply a force of 30 N and the
lever lifts the branch with a force of 120 N. What is the mechanical advantage
of the lever?
A. 4
B. 0.25
C. 2
D. 90
Answer:
D 90 subtract it
Explanation:
How does the electric force between two charged particles change if the
distance between them is reduced by a factor of 2?
A. It is reduced by a factor of 2.
B. It is increased by a factor of 4.
C. It is increased by a factor of 2.
D. It is reduced by a factor of 4.
Answer:
increased by a factor of 4
Explanation:
Help me pretty please with a cherry on top!!
Answer:
A. im not for sure hope it helps
Explanation:
Which type of wave transfers energy in the same way as a sound wave?
A
Radiation wave
B.
Seismic wave
C.
Heat wave
D.
Light wave
Answer:
Radiation wave
Explanation:
Which of the following represents a covalent compound?
a. BeF2
b. KF
C. PCIE
d. Ti
What is reflection of light and its laws ?
Answer:
So, put simply, reflection is light bouncing off surfaces. The law of reflection determines how the light bounces off a surface. The law of reflection states that the angle of incidence is equal to the angle of reflection.
Hope this helps..The law of reflection states that, on reflection from a smooth surface, the angle of the reflected ray is equal to the angle of the incident ray. (By convention, all angles in geometrical optics are measured with respect to the normal to the surface that is, to a line perpendicular to the surface.
How much does a 20 kg rock weigh on Earth where g = 9.8 m/s2?
Answer:
[tex]\huge\boxed{196\:N}[/tex]
Explanation:
Mass and weight ain't the same thing. So, for calculating weight we would use Newton's 2nd Law of Motion i.e. Force = Mass × Acceleration.
According to question,
The mass is 20kg
Acceleration is 9.8 m/s^2
Putting the given values into the formula,
F = 20 × 9.8
F = 196N
So, the weight of the rock is 196 N
Hope it helps!<3
How to find acceleration?
Answer:
a=(v-u)/t is how you find acceleration.
A 5 kg ball is suspended on one cable. Calculate the tension in the cable
Answer:
49N
Explanation:
F=ma
We know the mass is 5kg, and since the ball is suspended on one cable, the acceleration is g, 9.8m/s^2
F=5kg*9.8m/s^2
= 49N
Hope this helps!
how many pixels would image contain if it's Dimension are 400 x 200 pixels
Answer:
800 pixels
Explanation:
400*200=800
Find the mass of an object moving at 20 m/s experiencing a momentum of 10
kg.m/s
Answer:
0.5 kgExplanation:
The mass of the object can be found by using the formula
[tex]m = \frac{p}{v} \\ [/tex]
p is the momentum
v is the velocity
From the question we have
[tex]m = \frac{10}{20} = \frac{1}{2} \\ [/tex]
We have the final answer as
0.5 kgHope this helps you
Please help ASAP, studying for finals.
A racecar rounds a curve on the track at a constant speed of 180 mph. Is the car accelerating?
1)No, its mass is constant.
2)Yes, its mass is constant.
3) No, its speed is constant.
4)Yes, its speed is constant.
Answer:
3)No, it's speed is constant.
what is the oxidation number of the noble gases such as xenon and argon?
Light that enters your eye strikes cells in the back of your eye
true
False
Answer: True
Explanation: Light enters your eye through the lens which then hits the retina which is located in the back of your eye.
HELP ASAP TIMER
Your younger brother gets a new toy car as a present. He winds up the toy, puts it on the ground and watches it accelerate for 5 seconds. You can explain how to find the net force acting on the toy car for the 5 seconds while accelerating by the following:
a
Use a meterstick and stopwatch to measure the distance the car travels for the 5s.
b
Use a balance to determine the mass of the car. Use a motion sensor to measure the speed of the car at a time of 0s and at time of 5s .
c
Use a balance to determine the mass of the car. Use a meterstick to measure the distance the car travels for the 5s .
d
Use a motion sensor to measure the speed of the car at a time of 0s and a time of 5s . Use a meterstick to determine the distance the car travels for 5s .
Answer:
b Use a balance to determine the mass of the car. Use a motion sensor to measure the speed of the car at a time of 0s and at time of 5s .
Explanation:
The right way to measure the net force on the car is take the measurement of its mass then find the speed of the car within the time 0s to 5s.
This is because the net force acting on car is given as;
Force = mass x acceleration
By using the balance, the mass is determine
Acceleration is the rate of change of velocity with time.
Acceleration = [tex]\frac{v - u}{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Now,
Force = mass x [tex]\frac{v - u}{t}[/tex]
Your pulse is caused by pressure of the blood on the artery wall, and it corresponds to your heart beat.
A. true
B. false
weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee true eeeeeeeeeeeeeeeeeeeee
Answer:
true
Explanation:
sorry if im wrong
Thor deja caer su martillo de la torre Torre Stark que tiene 95 pisos, si al llegar el Mjolnir al piso han transcurrido 9.5 segundos. Determina: a) La velocidad con la que el Mjonir golpea el suelo
Answer:
La magnitud de la velocidad con la que Mjonir golpea el suelo es 93.2 m/s.
Explanation:
Podemos encontrar la velocidad con la que el martillo golpea el suelo usando la siguiente ecuación:
[tex] v_{f} = v_{0} - gt [/tex] (1)
En donde:
[tex] v_{f}[/tex]: es la velocidad final =?
[tex] v_{0}[/tex]: es la velocidad inicial = 0 (lo deja caer)
g: es la gravedad = 9.81 m/s²
t: es el tiempo = 9.5 s
Al reemplazar los valores anteriores en la ecuación (1), tenemos:
[tex] v_{f} = 0 - 9.81 m/s^{2}*9.5 s = -93.2 m/s [/tex]
El signo negativo se debe a que el vector velocidad está dirigido hacia abajo en el eje vertical (y).
Por lo tanto, la magnitud de la velocidad con la que Mjonir golpea el suelo es 93.2 m/s.
Espero que te sea de utilidad!
You are trying to climb a castle wall so, from the ground, you throw a hook with a rope attached to it at 24.1 m/s at an angle of 65.0° above the horizontal. If it hits the top of the wall at a speed of 16.3 m/s, how high is the wall?
Answer:
The value is [tex]h = 13.2 \ m[/tex]
Explanation:
From the question we are told that
The speed of the rope with hook is [tex]u = 24 .1 \ m/s[/tex]
The angle is [tex]\theta = 65.0^o[/tex]
The speed at which it hits top of the wall is [tex]v = 16.3 m/s[/tex]
Generally from kinematic equation we have that
[tex]v_y^2 = u_y ^2 + * 2 (-g)* h[/tex]
Here h is the height of the wall so
[tex][16.3 sin (65)]^2 = [24.1 sin (65)] ^2+ 2 (-9.8)* h[/tex]
=> [tex]h = 13.2 \ m[/tex]
A gun fires a bullet horizontally with a velocity of 90 m/s from a tower. Neglecting air resistance, how far will the bullet travel horizontally in 4 seconds?
Answer:
The distance covered along the horizontal axis is [tex]s = 360 \ m[/tex]
The distance covered along the vertical axis is [tex]h = 78.4 \ m[/tex]
Explanation:
From the question we are told that
The horizontal velocity is [tex]u_x = 90 \ m/s[/tex]
The time considered is [tex]t = 4 \ s[/tex]
Generally the distance which the bullet will cover in the horizontal direction for the given time is mathematically represented as
[tex]s = u_xt + \frac{1}{2}* at^2[/tex]
Here a is the acceleration along the horizontal direction and the value is [tex]a = 0 \ m/s^2[/tex]
So
[tex]s = 90 * 4 + \frac{1}{2}* * 0 * 4^2[/tex]
=> [tex]s = 360 \ m[/tex]
Generally the distance which the bullet will cover in the vertical direction for the given time is mathematically represented as
[tex]h= u_y t + \frac{1}{2}* gt^2[/tex]
Here [tex]u_y[/tex] is the initial velocity of the bullet along the vertical axis and the value is [tex]u_y = 0 \ m/s[/tex]
[tex]h = 0 * 4 + \frac{1}{2}* 9.8 *4^2[/tex]
=> [tex]h = 78.4 \ m[/tex]
A researcher changes the DNA in a soybean plant so that it produces offspring with a resistance to weed killer. Which best describes this scenario? genetic engineering gene therapy cloning selective breeding
Answer:
Genetic engineering
Explanation:
Genetic engineering or also called genetic modification is the direct manipulation of an organism's genome in order to bring about a desirable trait in such organism. In genetic engineering procedure, the organism manipulated is called TRANSGENIC or GENETICALLY MODIFIED (GM) organisms.
In this case, a researcher is said to change the DNA (genetic material) in a soybean plant so that it produces offspring with a resistance to weed killer. This describes a genetic engineering procedure in which the soybean plant is manipulated to yield a desired trait, which is resistance to weed killer.
Answer:
A. genetic engineering
Explanation:
I took the quiz
Cardiovascular fitness measures the health of which body system?
Answer:
I believe it is the circulatory system.
Explanation:
Have a nice day.
Please do all of i will give you brainlest and thanks to best answer plz do it right
Answer:
the answer is B
Explanation:
because i had this question in 8th grade
Name the following ionic compounds: BeCl2
Answer:
Beryllium chloride
Explanation:
I hope this helps!
Can I get branliest?!
Which of the following units are the Standard International units for
displacement?
A. Meters (m)
B. Meters per Second (m/s)
C.Meters per Second Squared (m/s2)
D. Seconds per Meter (s/m)
A rat runs 2m right, turns around and runs 3m left. Then goes 2m right. What is its displacement?
A. 1m right
B. 1m left
C. 7m
D. 7m left
Answer:
Explanation:
I think this answer would be 1m to the left.
Which is the correct equation for the force applied by a spring?
Answer:
B. [tex]F = -k*x[/tex]
Explanation:
The force of a spring can be easily calculated using Hooke's law which tells us that the force applied on a spring is equal to the product of the constant of a spring by the compressed or stretched distance of the spring.
That is:
[tex]F = k*x[/tex]
k = spring constant [N/m]
x = distance [m]