Explanation:
[tex](.0000360 gAu} )\frac{1molAu}{196.96gAu}= ? mol Au[/tex]
Use the drop-down menus after each statement to identify the dry climate region being described.
v climates feature hot summers and cold winters, dividing the climate into sharply contrasting
seasons.
v climates are characterized by very little rainfall, hot summers, and mild winters.
v climates have annual precipitation between 15 and 25 inches.
Semiarid climate regions have areas of grasslands, called
steppes.
Answer:
✔ semiarid
✔ desert
✔ semiarid
✔ steppes
.
Explanation:
The deserts and steppes comprise the regions that are characterized by dry climates. The dry climates are characterized by very little rainfall, hot summers, and mild winters. The correct option is B.
What is a dry climate?The areas which are very dry and where the water escapes and leaves the area drier than other places is known as the dry climate. Most dry climates have summers very hot, winters cool and warm and the air is very dry.
The main characteristic feature of the dry climate is the low and infrequent rainfall. Arid and semi desert areas have only about 35 cm rainfall per year.
Thus the correct option is B.
To know more about dry climate, visit;
https://brainly.com/question/3623676
#SPJ2
EXPLAIN What is one way that the thermal energy of a system can be changed?
Answer:
When the temperature of an object increases, the average kinetic energy of its particles increases. When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.
Explanation:
BTW I GOT THE ANSWER FROM KRISTINA
The thermal energy of a system is the amount of heat energy in it.
One way to change thermal energy is by alter the system by introducing a new object to the system.
The thermal energy of a system is calculated using:
[tex]E = \frac 12 mc\theta[/tex]
Assume the mass of the system remains unchanged.
When an object is introduced to the system, the thermal energy becomes:
[tex]E_2 = \frac 12 mc(\theta + \alpha)[/tex]
Where:
[tex]\alpha \ne 0[/tex] --- the temperature of the object.
Expand:
[tex]E_2 = \frac 12 mc(\theta) + \frac 12 mc (\alpha)[/tex]
Substitute: [tex]E = \frac 12 mc\theta[/tex]
[tex]E_2 = E + \frac 12 mc (\alpha)[/tex]
This means that the thermal energy of the system will change by the thermal energy of the object that is being introduced to the system.
Hence, one way the thermal energy can be changed is to introduce a new object (or matter).
Read more about thermal energy at:
https://brainly.com/question/18989562
How do we get heat from the sun?
Answer:
When the Sun's energy moves through space, it reaches Earth's atmosphere and finally the surface. This radiant solar energy warms the atmosphere and becomes heat energy. This heat energy is transferred throughout the planet's systems in three ways: by radiation, conduction, and convection.
Explanation:
Answer:
The sun radiates energy in all directions. Most of it dissipates into space, but the tiny fraction of the sun's energy that reaches Earth is enough to heat the planet and drive the global weather system by warming the atmosphere and oceans. The delicate balance between the amount of heat Earth receives from the sun and the heat that Earth radiates back into space makes it possible for the planet to sustain life.
Hopefully, this helps you out!
14. HCOOH is an example of
A. alcohols.
B. aldehydes.
C. carboxylic acids.
D. ethers.
E. ketones.
Answer:
carboxylic acid is the answer
Explanation:
Plz mark brainliest
1. Suppose that there were two isotopes of Sodium.
28% of the naturally occurring sodium atoms had a
mass of 22, and 72% atoms had a mass of 23. What
would the average atomic weight of sodium be?
Answer: C. The university surveys 600 randomly selected students who attend the university. Correct
Explanation:
22.72 is the average atomic weight of sodium.
What are isotopes?Isotopes are different versions of a specific element.
1st isotopes of 22u = 28%
2nd isotopes of 23u = 72%
The average atomic weight of sodium be=
22 x 28 + 23 x72
=2272/100
=22.72
Hence, 22.72 is the average atomic weight of sodium.
Learn more about isotopes here:
https://brainly.com/question/13662697
#SPJ2
What is the name of the warm phase associated with melting ice and higher sea level? PLSSSSSSS ILL GIVE 5 STARS PLSSS JUST PLS HELP ME ITS FOR MY MIDTERM REVIEW ;-; ITS DUE TODAY!!! PLSSS
Global Warming
Explanation:
The melting of the polar ice caps due to mostly negative human interactions with the environment.
Compare the potential energy of two atoms chemically bonded to their potential energy when separated.
Answer:
See explanation
Explanation:
The essence of chemical bonding is in order to attain minimum energy. The minimum energy state is the most stable state of a chemical system.
As the distance of separation between atoms decreases, the potential energy of the system decreases accordingly.
An optimum distance is reached when the two atoms attain the lowest potential energy. This is designated as the bond distance of the two atoms.
Hence two atoms have lower potential energy when bonded than when separated at large distance.
When two atoms are chemically bonded they have Lower potential energies while when they are separated they have higher potential energies
The potential energies of atoms chemically bonded is directly proportional to the distance between the atoms ( i.e as the distance between atoms decrease the potential energies of the atoms decreases accordingly) and this enables chemically bonded atoms to attain a more stable state.
The lower the potential energy of bonded atoms the more stable the element/compound becomes therefore it is necessary that bonded atoms attain the least possible potential energy.
Hence we can conclude that When two atoms are chemically bonded they have Lower potential energies while when they are separated they have higher potential energies .
Learn more : https://brainly.com/question/17637022
Explain the electroplating process of an iron key with silver. the materials provided for electroplating is AgNO3 solution, silver rod and iron key.
Answer:
See explanation
Explanation:
The process of electroplating an iron key with silver involves electrolysis.
The anode is a silver rod, the electrolyte is AgNO3 solution while the cathode is the iron key. A battery is connected to provide energy to drive the non-spontaneous electrochemical reaction.
Electrons flow from the anode to the cathode. Silver ions from the silver rod replenishes the silver that is deposited on the iron key in order to continue the electrolytic process.
The silver anode is therefore depleted in mass while the iron key increases in mass.
Displacement can be added to get the total
a) velocity
b) distance
c) speed
d) acceleration
What is environment?
Answer:
where an organism lives which includes everything that surrounds and influences the organism.
A block is pulled 0.90 m to the right in 3.75 s.
What is the block’s average speed to the nearest hundredth of a m/s?
Answer:
0.36 m/s
Explanation:
im in 8th grade in honors science and i think, since u have distance and time you have to divide distance by time
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide? Also, state why.
A. one
B. two
C. three
D. four
E. none
There are 2 lone pairs
Further explanationGiven
a molecule of calcium sulfide
two valence electron of Calcium(Ca)
six valence electrons of Sulfur(S)
Required
number of lone pairs of electrons
Solution
Lewis structure shows the form of bonds that occur in the valence electrons of an element or compound
Valence electrons are electrons used in a chemical bond
To achieve stability, the element S needs 2 more electrons which are obtained from 2 electrons from the Ca element,
A lone pair electrons means refers to an unshared pair of electrons(not bonding to the other atoms)
The nervous system involves actions that control
Answer:
The peripheral nervous system can be further divided into the autonomic system, which regulates involuntary actions, and the somatic system, which controls voluntary actions.
Explanation:
mark as brainly plz and thanks
Answer: voluntary actions.
Explanation:The peripheral nervous system can be further divided into the autonomic system, which regulates involuntary actions, and the somatic system, which controls voluntary actions.
Please if you don't know don't answer
Answer:
Mass = 50kg, a = 20m/sec^2
F = MA
F = 50 * 20
F = 1000N
F = MA
650 = M * 10
M = 650/10 = 65kg
The phenomenon of weightlessness occurs when there is no force of support on your body. when your body is effectively in free fall, accelerating downward at the acceleration of gravity, then you are not being supported.
F = Gm1m2/distance^2
F = 6.6726* 10 ^-11 * 70 * 5.98 * 10^24/(6.38 * 10^6)^2
hope it helps you
Which statement is true about a reaction represented by a chemical equation that shows energy as a reactant?

A.
It absorbs energy.

B.
It releases energy.

C.
It is a replacement reaction.

D.
It is a combustion reaction.
Based on table N of the reference tables what is the number of hours required for 42k (potassium -42) to undergo three half-life periods
The number of hours required : 37.2 hours
Further explanationGiven
⁴²K (potassium -42)
Required
The number of hours
Solution
The atomic nucleus can experience decay into 2 particles or more due to the instability of its atomic nucleus.
Usually, radioactive elements have an unstable atomic nucleus.
Based on Table N(attached), the half-life for ⁴²K is 12.4 hours, which means half of a sample of ⁴²K will decay in 12.4 hours
For three half-life periods :
[tex]\tt 3\times 12.4=37.2~hours[/tex]
Can someone please help me out
Answer:
a. increases
b. increases
c. decreases
how does the immune system uses feedback mechanisms?
Answer:The main job of the innate immune system is to fight harmful substances and germs that enter the body, for instance through the skin or digestive system. The adaptive (specific) immune system makes antibodies and uses them to specifically fight certain germs that the body has previously come into contact with.
If 50. mL of 1.0 M NaOH is diluted with distilled water to a volume of 2.0 L, the concentration of the resulting solution is A0.025 M B 0.050 M C 0.10 M D 0.50 M E 1.0 M M
Answer: The concentration of the resulting solution is 0.025 M
Explanation:
According to the dilution law,
[tex]M_1V_1=M_2V_2[/tex]
where,
[tex]M_1[/tex] = molarity of concentrated [tex]NaOH[/tex] solution = 1.0 M
[tex]V_1[/tex] = volume of concentrated [tex]NaOH[/tex] solution = 50 ml
[tex]M_2[/tex] = molarity of diluted [tex]NaOH[/tex] solution = ?
[tex]V_2[/tex] = volume of diluted [tex]NaOH[/tex] solution = 2.0 L = 2000 ml (1L=1000ml)
Putting in the values we get:
[tex]1.0\times 50=M_2\times 2000[/tex]
[tex]M_2=0.025M[/tex]
Therefore, concentration of the resulting solution is 0.025 M
The concentration of the resulting solution if 50. mL of 1.0 M NaOH is diluted with distilled water to a volume of 2.0 L is 0.025M
HOW TO CALCULATE FINAL CONCENTRATION:
The concentration of a solution can be calculated by using the following formula:C1V1 = C2V2
Where;
C1 = initial concentration (M)C2 = final concentration (M)V1 = initial volume (L)V2 = final volume (L)According to this question;
C1 = 1.0MV1 = 50mLC2 = ?V2 = 2000mL = 2L1 × 50 = C2 × 200050 = 2000C2C2 = 50 ÷ 2000C2 = 0.025MTherefore, the concentration of the resulting solution if 50. mL of 1.0 M NaOH is diluted with distilled water to a volume of 2.0 L is 0.025M.Learn more at: https://brainly.com/question/17329736?referrer=searchResults
What is the correct order of the scientific method?
Answer:
make an observationask questionsform a hypothesispredict your hypothesistest your hypothesis predictionmake new modifications to your hypothesis (repeat the steps)Explanation:
I hope this helps! :)))
During a chemical or physical change, energy may be...
a. created into another form
b. destroyed and reinvented into another form
c. converted into another form
d. disappeared
Answer: C: Converted into another form
Explanation: pues es esa calale y si va a hacer
During a chemical or physical change, energy is converted to another form. Energy cannot be created or destroyed. During a chemical reaction, physical change the energy and mass are conserved.
What is law of conservation of energy ?According to the law of conservation of energy energy can neither be crated nor be destroyed. Hence, the total energy of a system is always conserved.
However, energy can be transformed from one form to the other. Therefore, the energy lost in one form is gained in another form. For example, in all electrical devices, the electrical energy is converting to other forms of energy such as light, thermal , mechanical etc.
Similarly, during a chemical reaction, the energy released by a reaction system is equal to the energy absorbed by other reacting system. Similarly in electrochemical cells the chemical energy is converting to electrical energy.
Find more on energy transformation:
https://brainly.com/question/17589256
#SPJ6
How many atoms of the element with atomic number 11 are in the reactants of the given formula?
2 NaCl + H2SO4 → 2 HCl + Na2SO4
The number of Na atoms in the reactants = 2
Further explanationEvery chemical reaction involves compounds that can act as reactants or products
The reactants will react to produce products
The reactants are usually written on the left side of the reaction, while the products on the right side of the reaction
Reaction
2 NaCl + H₂SO₄ → 2 HCl + Na₂SO₄
The element with atomic number 11 = Na(Natrium)
The number of atoms of the element that reacts or is produced can be seen from the reaction coefficient and the number of atoms in the compound
Na in NaCl = 1 atom
From equation, cofficient for NaCl = 2, so number of atoms of Na=2 x 1 = 2
An object is placed at 0 on a number line. It moves 3 units to the right, then 4 units to the left, and then 6 units to
the right. What is the displacement of the object?
1
5
7
13
Answer:
the answer will be five
Explanation:
i got this question on a test and i got it right
Which physical properties do glass and ice share? Select the two correct
answerS.
DA Density
D B. State
DC. Melting point
D D. Brittleness
SUBMIT
B, C
verified just did it
B. State
C. Melting Point
Both ice and glass comes under the category of solids since they have definite shape and definite volume. Both the ice and glass allows light to pass through it, that means they are transparent in nature.Ice floats, we can infer that ice must be less dense than water. If water is frozen in a glass jar, the glass jar breaks. This implies they both have similar densities.Thus, options B and C are correct.
Learn more:
brainly.com/question/11107994
Use the periodic table to identify the number of valence electrons available for bonding for each of the following elements.
Answer: Edgy, 2020
Explanation: <3
Answer:
refer to picture below :)
Explanation:
FIRT TO ANSWER GETS 3,000 ROBUX FOLLOW Y INSTA AT COREK1D AND ARIAK1D
What is one way in which sound and light are alike?
They both travel easily through wood.
They are both types of energy.
They both can travel through outer space.
They both make it easier for you to see what you are doing.
Answer:
B)They are both types of energy.
Explanation:
Answer:
they both travel easily through wood
Explanation:
i don't want your rbx i just wanna help you:)
Do the earth plates ride on the crust or mantle?
Answer:
Mantle
Explanation:
The crust is also known as earths tectonic plates
Help meeee I don’t understand
Answer:
unbalanced moving to the right is the awnser
Answer:
unbalanced moving to the right i think
Explanation:
Ratan started business with cash Rs 50000
Answer:
what's the question here then ?????
Explanation:
nepal ????
Please help me!!!!!!!it is about elements on the periodic table. Please help!!!!!
Answer:
a\c enables the protons so therefore we duplicate the neutrons making for the first one 80 squared then subtracted by 201 and then do that for all