Answer:
try (107.87 amu)
Explanation:
The red outlined elements have what major characteristics in common?
1 point
Metals, Nonmetals, and Metalloids
One major characteristic they have in common is they are metals.
From acetic acid how to get formic acid ?
Answer:
The Reaction of acetic acid withNaN3 gives out methylamine. rxn of methylamine to HNO2 to give out methanol. oxidation of methanol via Kcr207(H+) to give formic acid.
Based on the activity series provided, which reactants will form products? F > Cl > Br > I CuI2 + Br2 Right arrow. Cl2 + AlF3 Right arrow. Br2 + NaCl Right arrow. CuF2 + I2 Right arrow.
Answer: Cul2 + Br2 ->
Explanation:
Answer:
i believe the answer is a
Explanation:
What is electron affinity?
Answer:
The ability of an atom to accept an electron.
Explanation:
Electron affinity is measured by observing the energy change of a substance when an electron is added to it in its neutral gas form. For example, elements that are on the far right of the periodic table (excluding noble gases) are more likely to accept electrons rather than give them up. This is why Fluorine has the highest electron affinity of all atoms on the periodic table.
The list identifies various properties of four elements:
Element 1 is a gas at room temperature.
Element 2 is a solid which conducts electricity.
Element 3 is a gas with an effective nuclear charge of +7.
Element 4 is malleable and can take the form of a shiny solid sheet.
Based on this list, which elements are metals?
A. Elements 1 and 3
B. Elements 1 and 4
C. Elements 2 and 3
D. Elements 2 and 4
Answer: D
Explanation: I guessed it and got it right
A fundamental object that is difficult to divide into smaller bits is known as an element. Therefore option D is correct.
What is element ?An element is a species of atoms, including the pure material made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, in contrast to chemical compounds, cannot be reduced by any chemical process into simpler molecules.
An element is a material that cannot be broken down by non-nuclear processes in chemistry and physics. A discrete component of a larger system or collection is referred to as an element in computers and mathematics.
Metals, nonmetals, and metalloids are the Periodic Table's three main groupings. Each group's constituent elements share comparable physical and chemical characteristics. Among the physical characteristics used to separate the three groups are, A substance's capacity to reflect light is referred to as luster.
Thus, option D is correct.
To learn more about element follow the link below;
https://brainly.com/question/13025901
#SPJ2
PLEASE HELP I WILL GIVE BRAINLIEST!!!!!
What is a main difference between a mixture and a pure substance?
OAmixture is only a liquid, but a pure substance can be in any state.
OAmixture looks the same throughout, but a pure substance does not.
OAmixture can vary in composition, but a pure substance has a set composition.
O Amixture can be made up of a single compound, but a pure substance cannot
Answer:
I think the answer is c!
Explanation:
Pure substances are further broken down into elements and compounds. Mixtures are physically combined structures that can be separated into their original components. A chemical substance is composed of one type of atom or molecule. hope this helps you!
A lidded glass container is filled with a colored gas. After a period of time, it is observed that the gas is uniformly spread throughout the box and that the movement has slowed considerably. Next, a warm iron plate is carefully placed under the box. Why is there resumed movement of the gas in the container?
A) The warm iron plate absorbed energy from the gas particles, making them move faster.
B) The warm iron plate vibrated due to the energy it had, disturbing the gas in the process.
C) Heat from the warm iron plate transferred energy to the gas particles, making them move faster.
D) The warm iron plate heated the insulated box causing it to vibrate, disturbing the gas in the process.
Answer:
It's not A, it's likely not C? I'm guessing B or D.
A metal is found that has a mass of 27g and will displace 6mL of water. Calculate its density and identify the metal.
The density of metal = 4.5 g/ml, and the metal = Titanium
Further explanationDensity is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
mass of metal=27 g
volume = 6 ml
The density :
[tex]\tt \rho=\dfrac{27}{6}\\\\\rho=4.5~g/ml[/tex]
The metal with a density of 4.5 g/ml is Titanium
4. Look at the equation below and determine what fitsI in the empty box.
14 C --> 4 N+
?
re
c. en TH
What belongs in the empty box?
A.
В.
e
D.
Answer:
Beta particles
Explanation:
A beta emission is said to occur when a neutron is converted into a proton. When a beta emission takes place, the daughter nucleus increases it's atomic number by 1. A neutrino is also produced.
Since the mass number remain the same but the daughter nucleus has it's atomic number increased by 1, then the particle is a beta particle.
At what temperature is water a gas
Answer:
212 degrees Fahrenheit
Explanation:
When liquid water reaches a low enough temperature, it freezes and becomes a solid—ice. When solid water is exposed to enough heat, it will melt and return to a liquid. As that liquid water is further heated, it evaporates and becomes a gas—water vapor.
WILL BE MARKED BRAINLIEST IF U ANSWER CORRECT
PLUS 30 PT
Why does DNA dissolve in water?
Why is salt added to solution of DNA and water?
How does ethanol help the precipitate form?
After a pellet is formed, is the DNA in the pellet or the supernate?
Explanation:
Because of this, DNA and RNA can easily dissolve in water. ... Adding ethanol helps the Na+ and PO3- ions come together, because ions travel easier in ethanol than water. The supernate is removed and new ethanol is added in the second washing. This removes any residual salt that remained on the pelleted DNA.
Answer:
DNA is polar due to its highly charged phosphate backbone. Its polarity makes it water-soluble (water is polar) according to the principle "like dissolves like". ... This fact makes water a very good solvent for charged compounds like salts.
Your DNA's sugar phosphate backbone is charged. By adding salt, we help neutralize the DNA charge and make the molecule less hydrophilic, meaning it becomes less soluble in water. The salt also helps to remove proteins that are bound to the DNA and to keep the proteins dissolved in the water.
It is well known that Ethanol has a lower dielectric constant than water, making it to promote ionic bond formations between the Na+ (from the salt) and the PO3- (from the DNA backbone), further, causing the DNA to precipitate.
Explanation:
Ideally DNA needs to be precipitated with pellet and should not remain in supernatant. DNA is acidic in nature and therefore, needs optimum salt concentration in the buffer to be pelleted from a solution. At very low salt concentration or without salt DNA would remain in supernatant.
Which is stronger, the strong force (SF) or the electromagnetic force (EMF)? Describe how they battle each other in the nucleus. What would happen if their strengths were reversed?
Answer:uclear Force that holds together the nucleus of an atom. electromagnetic force. ... They are unstable because the Strong Force that would hold them together if the protons and neutrons were closer is weakened because the protons and neutrons get too far apart.
Explanation:
Write the net ionic equation for Potassium chloride + sodium nitrate
I believe the answer is this:
KCl + NaNO3 --> KNO3 + NaCl.
Answer:
No reaction
Explanation:
KCl + NaNO3 --> KNO3 + NaCl
Since these substances are all aqueous (no precipitates or other phases involved), if you were to write the ionic equation and cross out spectators, they'd all cancel so there is no reaction.
The only sure evidence for a chemical reaction is
Answer:
that one or more new substances are produced. Temperature Changes Chemical reactions can release energy or absorb energy.
Explanation: .
How many moles of water will be produced from the combustion of 0.27 moles of CH3OH?
Answer:
0.54 mole of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2CH3OH + 3O2 —> 2CO2 + 4H2O
From the balanced equation above,
2 moles of CH3OH reacted to produce 4 moles of water.
Finally, we shall determine the number of mole of water (H2O) produced by the reaction of 0.27 moles of CH3OH. This can be obtained as follow:
From the balanced equation above,
2 moles of CH3OH reacted to produce 4 moles of water.
Therefore, 0.27 moles of CH3OH will react to produce = (0.27 × 4)/2 = 0.54 mole of H2O.
Thus, 0.54 mole of H2O is produced from the reaction.
c. What might have happened in Kush and Egypt if Kush had developed iron
weapons?
Answer:
Kush would have been able to fight better and probably would have never been invaded by Egypt, and they could have beaten the Assyrians when they tried to takeover Egypt. And the 25th dynasty would have continued.
Explanation:
that is my explanation and answer^
Which of the following is not a required characteristic for a living organism?
A) reproduction
B) mobility
C) homeostasis
D) adaptation
Answer:
B
Explanation:
living things are not required to move
Question 8 (3 points) What is the formula for Silver (III) sulfide? O Ag2(SO4)3 O Ag3(SO4)2 Ag3S2 Ag2S3
The formula of Silver (III) Sulfide is Ag2S3.
Hope this helps. Please mark brainliest!
What is the molarity of a NaOH solution if 28.2 mL of a 0.355 M H2SO4 solution is required to neutralize a 25.0-mL sample of the NaOH solution?A) 0.801B) 0.315C) 0.629D) 125E) 0.400
Answer:
A) 0.801
Explanation:
The reaction that takes place is:
2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂OFirst we calculate the H₂SO₄ moles that reacted:
0.355 M * 28.2 mL = 10.011 mmol H₂SO₄Now we convert H₂SO₄ moles to NaOH moles:
10.011 mmol H₂SO₄ * [tex]\frac{2mmolNaOH}{1mmolH_2SO_4}[/tex] = 20.022 mmol NaOHFinally we calculate the molarity of the NaOH solution:
20.022 mmol NaOH / 25.0 mL = 0.801 MSo the answer is option A.
The molarity of the NaOH solution used in the neutralization reaction has been 0.801 [tex]\rm \times\;10^-^3[/tex] M. Thus, option A is correct.
The neutralization reaction has resulted in the formation of the salt and water on reacting an acid with a base. In the neutralization reaction, the strength of acid and base can be given as:
[tex]\rm 2\;NaOH\;+\;H_2SO_4\;\rightarrow\;Na_2SO_4\;+\;H_2O[/tex]
For the neutralization of 1 mole of sulfuric acid, 2 moles of NaOH has been required.
The moles of sulfuric acid can be given as:
Moles = Molarity × Volume
Given, the molarity of acid ([tex]\rm H_2SO_4[/tex]) = 0.355 M
Volume of acid = 28.2 ml = 0.0282 L
Volume of base (NaOH) = 25 ml = 0.025 L
Moles of [tex]\rm H_2SO_4[/tex] = 0.355 × 0.0282 mol
Moles of [tex]\rm H_2SO_4[/tex] = 10.011 mol.
Since, 1 mole [tex]\rm H_2SO_4[/tex] = 2 moles NaOH
10.011 moles [tex]\rm H_2SO_4[/tex] = 10.011 × 2 moles NaOH
10.011 moles [tex]\rm H_2SO_4[/tex] = 20.022 moles NaOH.
The neutralization of 0.355 M [tex]\rm H_2SO_4[/tex] requires 20.022 moles NaOH. The strength of the NaOH solution will be:
Molarity = [tex]\rm \dfrac{Moles}{Volume\;(L)}[/tex]
Molarity of NaOH = [tex]\rm \dfrac{20.022}{0.025}[/tex]
Molarity of NaOH = 0.801 [tex]\rm \times\;10^-^3[/tex] M.
The molarity of the NaOH solution used in the neutralization reaction has been 0.801 [tex]\rm \times\;10^-^3[/tex] M. Thus, option A is correct.
For more information about the neutralization reaction, refer to the link:
https://brainly.com/question/4612545
Suppose you used 0.5 M NaOH to titrate your vinegar sample instead of 0.1 M. What effect does the concentration of base added have on the reliability of the results of your titration?
Answer: the reliability will be worse
Explanation:
Suppose we used 0.5 M NaOH to titrate our vinegar sample instead of 0.1 M.
Now by using 0.5M instead of 0.1M we are increasing the concentration of NaOH,
We know that the moles used = Volume x concnetration.
so for the same no of moles, if the concentration increases, the volume decreases.
Hence it will consume less NaOH.
now Since the volume decreases, the titration volume of less number will increase the % error.
Therefore the reliability will be worse.
The effect that the concentration of the added base has on the reliability of the results of the titration in question is; The reliability will be worse.
We are told that;
0.5 M NaOH is to be used to titrate a vinegar sample instead of 0.1 M.
Now, 0.5 M means a concentration of 0.5 and since it is higher than 0.1M, it means the concentration of NaOH will increase.
Formula for number of moles used is;
n = V × M
Where;
n is number of moles
V is volume
M is concentration
We can see that number of moles is directly proportional to the volume and concentration.
Thus, if the number of moles remains unchanged, as we have increased the concentration, it means that the volume will decrease.
Thus, lesser volume of NaOH will be used and as a result of this decrease in volume, there will be a greater possibility of error.
In conclusion, we can say that the reliability will be worse.
Read more at;https://brainly.com/question/22702792
How many atoms are in 2.37 moles of Krypton
Answer:
1.43 × 10²⁴ atoms Kr
General Formulas and Concepts:
Chemistry - Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
2.37 mol Kr
Step 2: Convert
[tex]2.37 \ mol \ Kr(\frac{6.022 \cdot 10^{23} \ atoms \ Kr}{1 \ mol \ Kr} )[/tex] = 1.42721 × 10²⁴ atoms Kr
Step 3: Check
We are given 3 sig figs. Follow sig fig rules and round.
1.42721 × 10²⁴ atoms Kr ≈ 1.43 × 10²⁴ atoms Kr
Which is an example of a compound? * He3 or H2O or C
Answer:
H2O
Explanation:
There is more than one element
Electron transfer between redox centers in proteins is controlled by quantum tunneling. We can model the region between two redox centers as an energy barrier which the electron must cross. If the distance between the redox centers is 0.681 nm and the energy of the electron is 0.5540.554eV lower than the height of the barrier, what is the probability that the electron will successfully cross to the next redox center
Answer:
5.61 e⁻³
Explanation:
Given that:
The barrier length = 0.681 nm = 6.81 × 10⁻¹⁰
The difference between the height of the barrier & the energy of the electron is;
[tex]V - E = 0.554 \ eV (1.6 \times 10^{-19} )[/tex]
= 8.864 × 10⁻²⁰ V
where;
m = 9.1 × 10⁻³¹ kg
The probability[tex]P = e^{-2 \ kd}[/tex]
[tex]k = 2 \pi \sqrt{\dfrac{2m (V-E)}{h^2} }[/tex]
[tex]k = 2 \pi \times \dfrac{\sqrt{2 \times 9.1 \times 10^{-31} \times 8.864 \times 10^{-20}}}{6.63 \times 10^{-34}}[/tex]
k = 3.806 × 10⁹
[tex]P = e^{-2 \ kd}[/tex]
[tex]P = e^{2 \times 3.806 \times 10^9 \times 6.81 \times 10^{-10}}[/tex]
P = 0.005606
P = 5.61 × 10⁻³
P = 5.61 e⁻³
for the following equation to be bal
Answer:
What's the rest of the question
Explanation:
Percent yield is very important in terms of money. The higher the percent yield, the more of a product you can make. If you are working for a drug company and your theoretical yield is 120 kg, but you actually made 105 kg, what is your percent yield?
A. 8.75%
B. 114%
C. 87.50%
D. 15.00%
Answer:
87.5 %
Explanation:
Step 1: Given data
Theoretical yield: 120 kgReal yield: 105 kgStep 2: Calculate the percent yield
When working with chemical reactions, we can determine the efficience in obtaining a product measuring the percent yield. The theoretical yield is the maximum amount of product that we could obtain according to the stoichiometry, whereas the real yield is the amount of product that we actually obtain when we carry out the process. We can calculate the percent yield usign the following expression.
%yield = real yield / theoretical yield × 100%
%yield = 105 kg / 120 kg × 100%
%yield = 87.5 %
In a carbon dioxide molecule, a double covalent bond forms when the carbon atom shares what
pairs of valence electrons with each oxygen atom.
Answer:
2 pair of an electron
Explanation:
carbon having 6 valence electron 2 electron involved in covalent bonding so 4 electron means 2 pairs of an electron will left.
Which scenario is likely to result in the most diverse offspring?
1 point
Sexual reproduction between two individuals from different continents
Sexual reproduction between two individuals in the same population
Asexual reproduction by binary fission
Asexual reproduction by budding
Answer: i think it is binary fission
Explanation:
How high of a Frequency would a photon have to be for it to have an energy of 4 joules
The frequency of photon=6.03 x 10³³ /s
Further explanationRadiation energy is absorbed by photons
The energy in one photon can be formulated as
[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]
Where
h = Planck's constant (6,626.10⁻³⁴ Js)
f = Frequency of electromagnetic waves
Energy of photon = 4 J
So the frequency :
[tex]\tt f=\dfrac{E}{h}\\\\f=\dfrac{4}{6.626.10^{-34}}\\\\f=6.03.10^{33}/s[/tex]
Calculate the molar mass of Ga(NO3)3
255.732 g/mol
159.738 g/mol
227.718 g/mol
131.727 g/mol
Answer:
255.732 g/mol
Explanation:
Molar mass of Ga(NO3)3 = 255.7322 g/mol. This compound is also known as Gallium(III) Nitrate.
The combustion of ethyne, shown below unbalance, produces heat which can be used to weld metals:
C2H2 (g) +502 (g) →2CO: (g) +H20 (g) AH reaction= -1544kJ
How much ethyne gas (in g) would you need to react with excess oxygen according to this reaction in order to raise the temperature of 325 g of high carbon steel from 165'C to its melting point, 1540 C? The heat capacity of high carbon steel is 0.490 J/g'C. (Assume a complete reaction and that all heat is transferred from the reaction to the metal with no loss.)
a. 7.37g
b. 1.84 g
c. 4.13 g
d 3.69 g
Answer:
3.69 g
Explanation:
Given that:
The mass m = 325 g
The change in temperature ΔT = ( 1540 - 165)° C
= 1375 ° C
Heat capacity [tex]c_p[/tex] = 0.490 J/g°C
The amount of heat required:
q = mcΔT
q = 325 × 0.490 × 1375
q = 218968.75 J
q = 218.97 kJ
The equation for the reaction is expressed as:
[tex]C_2H_{2(g)} + 5O_{2(g)} \to 2CO_{2(g)} + H_2O_{(g)} \ \ \ \ \ \Delta H^o_{reaction} = -1544 \ kJ[/tex]
Then,
1 mole of the ethyne is equal to 26 g of ethyne required for 1544 kJ heat.
Thus, for 218.97 kJ, the amount of ethyne gas required will be:
[tex]= \dfrac{26 \ g}{1544 \ kJ} \times 218.97 \ kJ[/tex]
= 3.69 g