How do I get started on learning how to dump offsets or grab them myself on ANY game, with a anti cheat or not

Using the color code chart for resistors, we can determine the resistance value of a resistor with four colored bands.

The first two bands represent the significant digits of the resistance value, the third band represents the multiplier, and the fourth band represents the tolerance.

In this case, the colors are yellow, violet, red, and gold. Referring to the color code chart, we can see that:

Yellow represents the digit 4

Violet represents the digit 7

Red represents the multiplier 100, which means we need to multiply the first two digits by 100

Gold represents the tolerance of +/- 5%

So the resistance value is:

47 x 100 = 4700 ohms or 4.7 kiloohms (since 1000 ohms = 1 kiloohm)

And since there is a tolerance of +/- 5%, the actual resistance could be between 4.465 kiloohms and 4.935 kiloohms for the 4.7 kiloohm resistor, or between 4.53 kiloohms and 4.87 kiloohms for the 4.7 kiloohm resistor.

Learn more about code chart here:

https://brainly.com/question/30362941

#SPJ11

To implement the application, follow these steps:

1. Create an SQS queue in the company's main AWS account.

2. Configure event notifications for EC2 instance lifecycle events in each AWS account, specifying the SQS queue as the target.

3. Set up cross-account access, allowing IAM roles in each account to publish messages to the main account's SQS queue.

4. Develop an application that authenticates using IAM roles and retrieves EC2 instance lifecycle events.

5. Use the AWS SDK or SDK-specific libraries to publish the events to the SQS queue in the main account.

6. In the main account, set up an application or service to consume messages from the SQS queue for further processing, such as storing in a database or triggering additional actions.

To know more about AWS related question visit:

https://brainly.com/question/31845535

#SPJ11

The frequency band primarily used for forward air control (FAC) ground-to-air communication is the VHF (Very High Frequency) band.

Forward air control involves coordinating and directing airborne assets, such as aircraft or drones, from a ground-based control station. Effective communication between the ground-based controller and the airborne assets is crucial for successful mission execution. The VHF band, which spans from 30 MHz to 300 MHz, is commonly used for ground-to-air communication in various aviation applications, including forward air control.

The VHF band offers several advantages for ground-to-air communication. Firstly, VHF signals can travel over relatively long distances, especially in line-of-sight conditions. This makes it suitable for air control operations where aircraft may be operating at considerable distances from the ground station. Additionally, VHF signals can penetrate through obstacles, such as buildings or vegetation, to some extent, enabling communication in urban or densely wooded areas. Furthermore, VHF radios are widely available and cost-effective, making them a practical choice for military and civilian applications. In summary, the VHF frequency band is primarily used for forward air control (FAC) ground-to-air communication. Its ability to provide reliable communication over long distances and its widespread use in aviation make it a suitable choice for coordinating and directing airborne assets from ground control stations.

Learn more about VHF radios here-

https://brainly.com/question/31261928

#SPJ11

Digital Rights Management (DRM) strengthens the protection of copyrighted materials in digital format.

DRM refers to technologies, techniques, and systems implemented to control access, usage, and distribution of digital content, including copyrighted materials. It aims to prevent unauthorized copying, sharing, and modification of digital content by applying encryption, access controls, digital signatures, watermarks, and other mechanisms.DRM systems are used by content creators, publishers, and distributors to enforce copyright laws and safeguard intellectual property rights in digital media such as music, movies, e-books, software, and more. These systems help prevent piracy, unauthorized distribution, and infringement by implementing restrictions and permissions on how the content can be accessed, used, and shared.

To know more about protection click the link below:

brainly.com/question/31913281

#SPJ11

The file processing system suffers from several major disadvantages, including data redundancy and inconsistency, integrity problems, security issues, difficulty in accessing data, and data isolation. These drawbacks have led to the emergence of database management systems (DBMS) as a solution to address these challenges for organizations.

The file processing system, characterized by the use of individual files for storing and managing data, faces various limitations. One such drawback is data redundancy and inconsistency, where duplicate data entries exist and inconsistencies arise when these duplicates have different values. This redundancy wastes storage space and can lead to discrepancies in data analysis.

Integrity problems are another concern, as data integrity ensures that the stored values adhere to predefined rules or constraints. In the absence of proper checks and controls, data integrity can be compromised, resulting in inaccurate or invalid data within the system.

Security problems are a significant issue with file processing systems. Without proper access controls and authentication mechanisms, unauthorized users may gain access to sensitive data, posing a threat to the organization's security and confidentiality.

Difficulty in accessing data is another disadvantage of the file processing system. Since data is dispersed across multiple files and formats, accessing and retrieving specific information becomes challenging, especially without dedicated application programs.

Data isolation is yet another drawback, as data is often scattered across different files, leading to fragmentation and making it difficult to obtain a holistic view of the data.

To address these shortcomings, organizations turned to database management systems (DBMS). DBMS provide a centralized and structured approach to data management, eliminating redundancy and inconsistency through data normalization techniques. They offer robust integrity controls, ensuring data accuracy and adherence to predefined rules. Security features like user authentication and access controls enhance data protection. DBMS also provide efficient data retrieval mechanisms, allowing users to access and manipulate data easily. By organizing data into a unified database, DBMS eliminate data isolation, enabling comprehensive data analysis and decision-making. Overall, DBMS overcome the limitations of file processing systems, making them essential tools for efficient and secure data management in organizations.

learn more about  database management systems (DBMS) here:

https://brainly.com/question/13266483

#SPJ11

The command-line output provided in the question is not included in the prompt, so it is difficult to provide a specific answer. However, based on the given options, the security analyst may be observing any of the following: ICMP spoofing - This is a type of attack where an attacker sends falsified ICMP packets to a target system, making it appear as if they are coming from a trusted source.

The correct answer is A .

The purpose of this attack is to evade detection and carry out other malicious activities, such as denial-of-service attacks. Without the command-line output, it is difficult to determine whether this is the observed attack. URL redirection - This is a type of attack where a user is redirected to a different website than the one they intended to visit. This is often done through malicious code injected into legitimate websites or through phishing attacks. The command-line output may show evidence of such an attack.

MAC address cloning - This is a type of attack where an attacker creates a copy of a legitimate device's MAC address and uses it to gain unauthorized access to a network. The command-line output may reveal evidence of such an attack. DNS poisoning - This is a type of attack where an attacker redirects traffic from a legitimate website to a fake one. This is often done by modifying the DNS server's records, which causes users to be redirected to a fake site. The command-line output may show evidence of such an attack. In summary, without the specific command-line output provided, it is difficult to determine which type of attack the security analyst is observing. However, it could potentially be any of the options provided, or even a different type of attack altogether. the type of attack being observed based on the command-line output. The purpose of this attack is to evade detection and carry out other malicious activities, such as denial-of-service attacks. Without the command-line output, it is difficult to determine whether this is the observed attack. URL redirection - This is a type of attack where a user is redirected to a different website than the one they intended to visit. This is often done through malicious code injected into legitimate websites or through phishing attacks.

To know more about command-line visit:

https://brainly.com/question/30236737

#SPJ11

Answer: Laptop computers.

Explanation: Laptops are the one type of computers that come in briefcase style.

The truth value for each of the following propositions is as follows:

If February has 30 days, then 7 is an even number. (Implication)

Truth value: True (since the antecedent is false, the implication is true)

February has 30 days iff 7 is an even number. (Biconditional)

Truth value: False (since the statements are not equivalent)

4.2 + 2 = 4 or 7 is an even number. (Disjunction)

Truth value: True (since at least one of the statements is true)

5.2 + 2 = 4 ⊕ 7 is an even number. (Exclusive OR)

Truth value: False (since both statements are false)

6.2 + 2 = 4 and 7 is an even number. (Conjunction)

Truth value: False (since one of the statements is false)

If February has 30 days, then 5 is a prime number. (Implication)

Truth value: True (since the antecedent is false, the implication is true)

February has 30 days or 7 is an even number. (Disjunction)

Truth value: True (since at least one of the statements is true)

Read more on truth value here https://brainly.com/question/28562089

#SPJ4

The option that is considered unethical is "Purchasing a single-user copy of photo editing software and installing it on all the computers in a computer lab" (Opton C)

This option is considered an unethical use of computer resources.

Purchasing a single-user copy of software and installing it on multiple computers violates   the software license agreement,which typically specifies that each installation should correspond to a valid license.

Installing the software on multiple computers,without obtaining the appropriate   licenses is an infringement on the rights of the software developer and constitutes unethical behavior.

Learn more about unethical use at:

https://brainly.com/question/30092922

#SPJ4

Full Question:

Although part of your question is missing, you might be referring to this full question:

Which of the following is considered an unethical use of computer resources?

A) Downloading freeware or shareware onto your home computer

B) Purchasing a game from an app store and downloading it directly to a mobile device

C) Purchasing a single-user copy of photo editing software and installing it on all the computers in a computer lab

D) Searching online for an electronic version of a school textbook.

The binary search algorithm can be modified to handle arrays with even lengths by considering the upper of the two middle elements as the pivot. This modification ensures that the algorithm works correctly and efficiently for arrays of any length.

In the traditional binary search algorithm, the pivot is chosen as the middle element of the array. This works well for arrays with odd lengths, but poses a challenge when the array length is even. In such cases, there is no exact middle element. To address this, we can modify the algorithm to consider the upper of the two middle elements as the pivot.

When dividing the array in half during each iteration, we can calculate the middle index as (low + high) // 2. However, for arrays with even lengths, we can modify this calculation to (low + high + 1) // 2 in order to choose the upper middle element as the pivot. By making this modification, the binary search algorithm can handle arrays of any length correctly. This ensures that the search process efficiently narrows down the search space and accurately finds the target element, regardless of the array's length.

Learn more about array here-

https://brainly.com/question/30757831

#SPJ11

The website http fun based learning com chemistry chembalancer default htm is an online resource designed to assist students in learning and practicing the balancing of chemical equations. It provides an interactive and engaging way to understand the complex concepts of chemistry.

Chemical equations are used to represent chemical reactions, and balancing these equations is a critical skill for any student studying chemistry. The website offers a step-by-step tutorial on how to balance chemical equations, making the process much easier and understandable for students.

The website features a game-like interface that makes learning chemistry fun and enjoyable. It uses colorful graphics, sound effects, and animations to keep students engaged and interested in the content.
To use the website, students are required to enter a chemical equation, and the website will provide them with the balanced version of the equation. The website also provides explanations and examples to help students understand the process of balancing chemical equations.

In conclusion, the website http fun based learning com chemistry chembalancer default htm is an excellent resource for students studying chemistry. It offers an interactive and engaging way to learn and practice balancing chemical equations, making the process much easier and understandable for students.

To know more about default visit:-

https://brainly.com/question/31919707

#SPJ11

Given the script script1 containing the line echo $2, the value displayed would be:

b. red blue green

The script script1 is executed with the arguments "red", "blue", and "green". In the line echo $2, $2 refers to the second argument passed to the script. In this case, the second argument is "blue". When the script is executed, it will display the value of the second argument, along with any other arguments that were passed.

Therefore, the value displayed by the script would be "red blue green", which includes all the arguments passed to the script in the order they were provided. This is because the echo command without any additional options or formatting will output the arguments as a single line, separated by spaces.

Please note that the output may vary depending on the specific shell environment and operating system you are using.

Learn more about script1 here:

https://brainly.com/question/32067195

#SPJ11

False. Microsoft Office is not available for all operating systems. It is primarily designed for the Windows and macOS operating systems.

However, Microsoft has also released Office for mobile devices running iOS and Android. In addition, there are online versions of Microsoft Office applications available through Microsoft's cloud-based service, Office 365. These online versions can be accessed from any operating system with a web browser and internet connection. However, Microsoft does not provide official versions of Office for operating systems such as Linux or Chrome OS. Overall, while Microsoft Office is available for a variety of operating systems, it is not available for all.

learn more about Microsoft Office here:

https://brainly.com/question/15131211

#SPJ11

The main answer to your question is as follows: to activate the AutoCAD startup option, you will need to modify the settings in the AutoCAD Options menu.


Open AutoCAD and click on the Application menu (the large red "A" in the upper-left corner). Select "Options" from the drop-down menu In the Options dialog box, click on the "Files" tab. Under "Support File Search Path", click on the "Add..." button.. In the "Add Support File Search Path" dialog box, navigate to the folder where your startup file is located. This is typically a file with the extension ".dwt".Select the folder and click "OK" to add it to the list of support file search paths. Click "OK" again to close the Options dialog box.

You have successfully activated the AutoCAD startup option. From now on, when you launch AutoCAD, it will automatically open the startup file located in the folder you added to the support file search path. To describe the procedure to activate the AutoCAD startup option, please follow these steps:Activate the AutoCAD startup option through the command line or system variables.Command Line Method:. Type 'STARTUP' in the command line and press Enter.Enter the value '1' to enable the startup option, and press Enter.B) System Variables ollowing the above procedure, you can successfully activate the AutoCAD startup option, which will display the Start tab every time AutoCAD is launched. This allows you to quickly access recent documents, templates, and other resources to begin your work more efficiently.

To know more about AutoCAD  visit:

https://brainly.com/question/30637155

#SPJ11

The option of  use cases that indicate that a non-relational database might be a better solution than a relational database are

A. Horizontal scaling for massive data volume

C. Data with unpredictable attributes

Databases that are non-relational and have been designed for distributed architectures are more effective for horizontal scaling, particularly when it comes to managing large volumes of data.

By distributing data across multiple nodes, they are able to handle sizable amounts of information effectively, resulting in increased performance and scalability.

Learn more about  non-relational database  from

https://brainly.com/question/15733057

#SPJ4

Which use cases indicate that a non-relational database might be a better solution than a relational database? (Select TWO).

A. Horizontal scaling for massive data volume

B. ACID compliance for all database transactions

C. Data with unpredictable attributes

D. Strong read-after-write consistency

E. High availability and fault tolerance

The speedup for a processor with a 200ns clock frequency and 10 equally pipelined stages, with pipeline latches taking 5ns each, can be calculated by comparing the execution time of a non-pipelined processor to that of the pipelined processor.

In a non-pipelined processor, the clock frequency directly determines the time required to execute a single instruction. In this case, the clock frequency is 200ns. For the pipelined processor, each stage is processed in parallel, reducing the effective time required for each instruction. However, the pipeline latches introduce additional delay. With 10 equally pipelined stages, the total delay caused by the pipeline latches is 5ns * (10 - 1) = 45ns.

To calculate the speedup, we need to compare the execution time of a non-pipelined processor with that of the pipelined processor. In the non-pipelined processor, the execution time of an instruction is 200ns. In the pipelined processor, each stage takes 200ns, but due to the pipelining, multiple instructions are processed simultaneously. Therefore, the effective execution time of an instruction in the pipelined processor is reduced to 200ns / 10 = 20ns. The speedup can be calculated by dividing the execution time of the non-pipelined processor by the execution time of the pipelined processor: 200ns / 20ns = 10.

Therefore, the speedup for this processor, with 10 equally pipelined stages and pipeline latches taking 5ns each, is 10, meaning that the pipelined processor can execute instructions approximately 10 times  Therefore, the speedup for this processor, with 10 equally pipelined stages and pipeline latches taking 5ns each, is 10, meaning that the pipelined processor can execute instructions approximately 10 times faster than the non-pipelined processor.

Learn more about frequency here: https://brainly.com/question/30625605

#SPJ11

TCP/IP is responsible for breaking down the data into packets and ensuring that they are properly formatted before sending them over the network. The true statement about internet protocols is that TCP/IP, DNS, and routing all work together to send packets over the internet.  

DNS is used to convert domain names into IP addresses, making it easier for the packets to be routed to the correct destination. Routing, on the other hand, is responsible for directing the packets to their final destination based on the IP address.

HTTP is a protocol used to transmit data between web servers and clients and ensure that the information inside the packets can be understood by both parties. However, it does not work directly with routing or DNS to send packets over the internet.

TCP is a transport protocol that ensures that data is reliably transmitted between devices, while DNS is a protocol used to translate domain names into IP addresses. Neither of them is directly involved in sending packets over the internet.

In summary, TCP/IP, DNS, and routing are the three protocols that work together to send packets over the internet. HTTP and TCP ensure that the information inside the packets can be understood, but they are not directly involved in routing packets to their final destination.

To know more about TCP/IP visit:

https://brainly.com/question/17387945

#SPJ11

True. The pipe operator (|) in Unix allows for the output of one command to be used as the input for another command.

When using the translate utility with the pipe operator, it can act as a filter to modify the input received from the previous command. This can be useful in many cases, such as manipulating text or data before passing it to another command.

The pipe operator (|) is used in UNIX to connect the output of one command to the input of another command. The translate utility (tr) can be used as a filter in such cases. When you use a pipe operator, the translate utility processes the output of the preceding command and performs the specified transformation.

To know more about pipe operator visit:-

https://brainly.com/question/31490048

#SPJ11

The correct answer is: C) Consistency. Consistency refers to the degree to which similar or related data values align throughout the data set.

In other words, it is the extent to which the data is uniform and consistent. This can be seen in examples such as each occurrence of an address having the same ZIP code. It is important for data to have consistency in order to ensure its reliability and usefulness.

Consistency in a dataset means that similar or related data values follow the same pattern or format, ensuring the data is reliable and uniform across the dataset. In your example, each occurrence of an address having the same ZIP code demonstrates consistency.

To know more about Consistency visit:-

https://brainly.com/question/30378821

#SPJ11

Data privacy may not be applicable in scenarios where there is no collection or processing of personal data.

For example, in the case of an app targeted at children for entertainment, if the app does not collect any personal data such as name, age, or location, then data privacy may not be applicable. Similarly, a platform developed purely for knowledge exchange with no motive of financial incentive may not collect personal data and hence may not be subject to data privacy laws.

However, in the case of a platform being hosted in a country with no Data privacydata privacy laws but targeted at data subjects from a country with stringent laws, data privacy laws of the targeted country may apply. Lastly, a website for disseminating knowledge and allowing anonymous access may not collect any personal data and hence may not be subject to data privacy laws.

learn more about Data privacy here:

https://brainly.com/question/30474385

#SPJ11

Computer networks enable the sharing of all of the above resources - files, hardware, and software. Networks connect computers and devices together, allowing them to communicate and share resources.

Files can be shared between computers on the same network, allowing for collaboration and access to shared information. Hardware such as printers, scanners, and storage devices can also be shared on a network, allowing multiple users to access and use the same resources. Additionally, software can be installed on a network and made available to all users, making it easier to manage and update software across multiple devices. Overall, computer networks are an essential tool for enabling resource sharing and improving collaboration and productivity in many different settings.
Computer networks enable the sharing of all of the above: files, hardware, and software. This is because networks allow different devices and users to exchange information and resources, increasing efficiency and collaboration.

To know more about files visit :-

https://brainly.com/question/28020488

#SPJ11

Among the given options, the answer isbSoftware requirements and user needs never change.Barry Boehm, the creator of the Spiral Model, identified the top ten risks in software development projects.

However, "Software requirements and user needs never change" is not one of the risks captured by Boehm. In fact, one of the fundamental principles in software development is that requirements and user needs are subject to change throughout the project lifecycle. This understanding led to the emergence of agile methodologies that emphasize flexibility and adaptability in response to evolving requirements. The other options, such as personnel shortfalls, unrealistic schedules and budgets, shortfalls in externally furnished components, developing the wrong software functions, and shortfalls in externally performed tasks, are among the risks highlighted by Boehm.

To learn more about requirements    click on the link below:

brainly.com/question/18369405

#SPJ11

The correct option is (D) Primary keys are used to represent relationships.

Primary keys are the fields in a database table that uniquely identify a record. Primary keys play an essential role in relational databases. A primary key is used to refer to a specific table row that is distinct from all other table rows. It is one of the main keys in database design and refers to a table's unique identifier. The primary key of a table should be a single attribute or field. It must also be unique, meaning that no two rows in the table can have the same value. Additionally, the primary key can not be null or empty. These are the basic properties of primary keys, which are always true. Therefore, option (D) is the answer: "Primary keys are used to represent relationships." This is not true. Relationships between tables are defined by foreign keys. A foreign key is a reference to a primary key in another table that is used to establish a relationship between the two tables. A primary key does not represent relationships; it identifies records in a table. Hence, The correct option is (D) Primary keys are used to represent relationships.

Learn more about Primary Keys here:

https://brainly.com/question/30159338

#SPJ11

False. Special software is not required to create a peer-to-peer network. Creating a peer-to-peer network does not necessarily require the installation of special software.

A peer-to-peer network is a decentralized network where each node (or peer) in the network can act as both a client and a server, allowing direct communication and resource sharing between participants without the need for a centralized server. In many cases, operating systems already have built-in capabilities or protocols that support peer-to-peer networking. For example, in a local area network (LAN), devices can connect and share resources without any additional software installation.

Additionally, certain applications and protocols, such as BitTorrent or blockchain networks, are designed to operate in a peer-to-peer fashion without requiring specialized software beyond what is needed to participate in the network. However, there may be situations where specialized software or applications are utilized to enhance the functionality or security of a peer-to-peer network. These software solutions can provide additional features, such as enhanced file sharing or encryption, but they are not essential for the basic establishment of a peer-to-peer network. Ultimately, the requirement for special software depends on the specific needs and goals of the network, but it is not a fundamental prerequisite for creating a peer-to-peer network.

Learn more about software here-

https://brainly.com/question/985406

#SPJ11

Management is asking me to implement access controls and permissions on the file share to ensure that only authorized individuals have the ability to make changes to the entire file share.

In order to fulfill management's request, I would need to set up user accounts and groups with specific permissions based on their role and responsibilities within the organization. This would involve reviewing and modifying existing access controls, as well as implementing new controls where necessary. Additionally, I would need to ensure that the file share is regularly audited to identify any unauthorized changes and take appropriate action to address them.

By implementing access controls and permissions on the file share, I can help ensure that only authorized individuals are able to make changes to the entire file share. This will help maintain the integrity and security of the data stored within it, and reduce the risk of data loss or unauthorized access.

To know more about security visit:
https://brainly.com/question/29790745
#SPJ11

In the chi-square test for goodness of fit for a categorical variable, the values in the null hypothesis must sum to 1.

The chi-square test for goodness of fit is used to determine if observed categorical data fits an expected distribution. The null hypothesis assumes that the observed data is not significantly different from the expected distribution. In this test, the expected distribution is typically specified by the researcher based on prior knowledge or theoretical expectations.

For the test to be valid, the values in the null hypothesis must sum to 1. This is because the test compares the observed frequencies with the expected frequencies under the null hypothesis. The expected frequencies are calculated by multiplying the total sample size by the probabilities specified in the null hypothesis. Since probabilities represent proportions, they must sum to 1. If the values in the null hypothesis do not sum to 1, it would violate the assumption of a valid probability distribution. The chi-square test relies on comparing observed and expected frequencies based on a valid probability distribution, and any deviation from this assumption would render the test results invalid. Therefore, it is necessary for the values in the null hypothesis to sum to 1 in order to properly interpret the chi-square test for goodness of fit.

Learn more about hypothesis  here-

https://brainly.com/question/31319397

#SPJ11

The correct option that refers to the location and management of cloud infrastructure is (2) Deployment. This term specifically refers to the process of setting up and configuring the various components of a cloud infrastructure, including the physical servers, storage systems, and networking components,

in order to ensure that they work together seamlessly to support the delivery of cloud services. In other words, deployment is the main answer to your question. To provide a more detailed explanation, it's important to understand that cloud infrastructure typically consists of a complex network of interconnected servers, storage devices, and other hardware and software components that are responsible for delivering cloud-based services to end-users. These components must be carefully managed and optimized in order to ensure that they are functioning at peak efficiency and reliability. This is where deployment comes in - it involves the installation, configuration, and management of these various components, as well as the allocation of resources such as CPU, memory, and storage to support the different workloads running in the cloud environment.

In summary, the correct answer to your question is Deployment, and this term encompasses a wide range of activities related to the location and management of cloud infrastructure. I hope this long answer helps to clarify this topic for you!Deployment refers to the location and management of cloud infrastructure. It involves the process of setting up, configuring, and managing the resources required to run applications in a cloud environment. This includes selecting the appropriate infrastructure, configuring security settings, and monitoring performance.

To know more about storage systems visit:

https://brainly.com/question/31677426

#SPJ11

Hactivists are individuals or groups who engage in hacking activities as a means of promoting social or political causes. They typically target organizations, websites, or systems that they perceive as representing opposing ideologies or engaging in actions they disagree with.

Website defacement: Hactivists may deface websites by modifying the appearance or content of web pages to convey their message or protest. This can involve replacing the original content with their own messages, graphics, or symbols.Distributed Denial of Service (DDoS) attacks: Hactivists may launch DDoS attacks to overwhelm a target's servers with a flood of traffic, rendering the website or online service inaccessible. This disrupts the targeted organization's operations and aims to draw attention to their cause.Data breaches and leaks: Hactivists may target organizations to gain unauthorized access to their systems and steal sensitive data. The stolen data is then often released or leaked publicly as a means of exposing perceived wrongdoing or raising awareness about specific issues.

To know more about Hactivists click the link below:

brainly.com/question/30783498

#SPJ11

It is FALSE to state that when viewing two files that look the same, but one has an invisible digital watermark, they appear to be the same file, except for their sizes.

A digital watermark is a type of marking that is hidden inside a noise-tolerant signal like audio, video, or picture data. It is commonly used to identify who owns the copyright to such a signal.

"Watermarking" refers to the technique of concealing digital information in a carrier signal; the concealed information should, but does not have to, be related to the carrier signal.

Learn more about watermark at:

https://brainly.com/question/29330080

#SPJ4

False. RAID 1, also known as "mirroring," is not inherently costly or requiring large memory space. RAID 1 works by duplicating data across multiple drives, ensuring redundancy.

Each drive contains an exact copy of the data, providing fault tolerance and increased data availability.

While RAID 1 does require a larger storage capacity to maintain the duplicate data, it does not necessarily mean it requires a large memory space. The size of the drives used in the RAID array determines the overall storage capacity, and it can be scaled according to the needs of the system.

The primary disadvantage of RAID 1 is the reduced storage efficiency since the duplicate data occupies additional disk space. However, it offers excellent data protection and quick recovery in case of drive failures, making it a reliable choice for certain

Learn more about RAID here:

https://brainly.com/question/31935278

#SPJ11