The slow movements of tectonic plates are responsible for the formation of mountain ranges, ocean basins, and other geological features. These movements occur over long periods of time, often taking millions of years to produce significant changes. Tectonic plates move as a result of convection currents in the Earth's mantle. As plates move, they can interact with each other in several ways, such as converging, diverging, or sliding past each other along transform faults. These interactions can cause the sudden and abrupt events of earthquakes and volcanic eruptions.
Earthquakes occur when two tectonic plates suddenly slip past each other, releasing energy in the form of seismic waves that propagate through the Earth's crust. Volcanic eruptions occur when magma from the Earth's mantle rises to the surface and is released through a vent or fissure in the crust. Both earthquakes and volcanic eruptions are related to the movements of tectonic plates, and often occur in areas where plates interact.
The time period represented in the data in the interactive is relatively short, typically spanning only a few decades or centuries. During this time, the frequency of individual earthquakes or volcanic eruptions is much higher than the motion of plates. However, over longer time periods, the movements of tectonic plates can result in significant changes to the Earth's surface, including the formation of new mountains, the opening of new ocean basins, and the creation of new land masses.
In conclusion, the slow movements of tectonic plates are responsible for shaping the Earth's surface over long periods of time, while the sudden events of earthquakes and volcanic eruptions are related to the interactions of these plates. While the frequency of individual earthquakes or volcanic eruptions may be relatively high over short periods of time, they are still ultimately driven by the slower processes of plate tectonics.
Interpret Tables The upper limit of the red birch (RB) rises over time. What happens to the mountain birch (MB) and its lower limit?
The lower limit of the mountain birch (MB) decreases over time.
What are the upper limit and lower limit of plants?Plants have different upper and lower limits, which are determined by the environmental conditions in which they grow.
The lower limit of plants refers to the minimum temperature at which they can survive and grow. This limit varies depending on the species, but in general, most plants cannot survive at temperatures below freezing (0°C or 32°F).
The upper limit of plants refers to the maximum temperature at which they can survive and grow. Again, this limit varies depending on the species, but in general, most plants cannot survive at temperatures above 40-45°C (104-113°F) for extended periods of time. High temperatures can cause a number of problems for plants, including dehydration, wilting, and damage to cell membranes and proteins.
Learn more about the upper limit of plants at: https://brainly.com/question/30815106
#SPJ1
Choose a starting point in the phosphorus cycle and describe the process you would go through to move through the entire cycle.
Living things and the earth both exchange phosphorous cycle. Phosphates are assimilated into organic molecules by plants from the earth.
Describe the phosphorous cycle.Phosphorus is typically trapped in sedimentary layers, where weathering can release it. In conclusion, phosphorus is transferred from one animal to the next in the food chain because animals eat vegetation. An animal's decomposition after death releases phosphorous into the atmosphere.
Where does the phosphorous cycle begin?The pebbles contain a lot of phosphorus. The phosphorus cycle begins in the earth's bedrock for this reason. The rocks' phosphate ions are disintegrated. These salts are swept into the earth and mixed with the soil there.
To know more about phosphorous cycle visit:-
https://brainly.com/question/1615727
#SPJ1
Question:
You are a molecule of phosphorus. Choose a starting point in the phosphorus cycle and describe the process you would go through to move through the entire cycle.
Which correctly lists the three gases that are part of Earth's cycles in both the atmosphere and biosphere?
O radon, carbon monoxide, oxygen
O carbon dioxide, nitrogen, oxygen
O nitrogen, carbon dioxide, carbon monoxide
O carbon dioxide, radon, oxygen
Explain which cells,tissues,or organs should be modified to lead to successful photosynthesis in animals or humans
Answer:
Photosynthesis is a process that is only possible in autotrophic organisms such as plants, algae, and some bacteria. This process involves the conversion of light energy from the sun into chemical energy in the form of glucose, which is the primary source of energy for these organisms. Animals and humans, on the other hand, are heterotrophic organisms and cannot perform photosynthesis. They rely on consuming other organisms to obtain energy.
Therefore, it is not possible to modify any cells, tissues, or organs in animals or humans to carry out photosynthesis successfully. This is because photosynthesis requires specific organelles such as chloroplasts, which are found only in the cells of autotrophic organisms. Additionally, photosynthesis requires specialized pigments such as chlorophyll, which is responsible for capturing light energy. These pigments are also found only in autotrophic organisms.
In summary, modifying cells, tissues, or organs in animals or humans will not lead to successful photosynthesis, as this process requires specific structures and pigments found only in autotrophic organisms.
According to the NIH, “enzymes are biological catalysts that speed up biochemical reactions in living organisms, and which can be extracted from cells and then used to catalyze a wide range of important processes.”
Which statement BEST reflects the enzyme related activity shown in the diagram above?
The effect of an enzyme in reducing the activation energy required to start a reaction.
The increase of released energy caused by the introduction of an enzyme.
The increased amount of energy supplied once the enzyme was introduced into the reaction.
The impact of increased reactants, with and without the presence of an enzyme, and the subsequent change in products.
The statement that BEST reflects the enzyme related activity described is: "The effect of an enzyme in reducing the activation energy required to start a reaction."
What is enzyme?Enzymes are biological molecules, typically proteins, that act as catalysts to speed up chemical reactions in living organisms. Enzymes work by binding to specific reactant molecules and lowering the amount of energy required to initiate the chemical reaction, thus increasing the reaction rate.
The diagram shows the energy profile of a chemical reaction with and without the presence of an enzyme. The energy required to initiate the reaction (activation energy) is lower in the presence of an enzyme.
Enzymes work by binding to reactant molecules and lowering the energy required to break bonds and initiate the reaction, thus increasing the reaction rate. The other statements do not accurately reflect the activity shown in the diagram.
Learn more about enzyme here: https://brainly.com/question/1596855
#SPJ1
What are the types of seeds and classes of seeds?
Answer:
Nucleus, Breeder, Foundation, and Certified.
What is a seed?One of the ways in which a plant produces another plant of its own kind is the seed. Just as birds lay eggs to reproduce their kind, the plant grows a seed that makes another plant.
The flower or blossom of a plant must be fertilized or the seed it produces will not grow. After the seed is fully grown, or mature, it must rest. The rest period varies among different kinds of seeds. Many of them will not grow until they have rested thru the winter.
Seed growth requires moisture, oxygen, and warmth. Light helps some plants start seed growth. If seed growth doesn't start within a certain time, the seed will die. When seeds are stored by man for future use, they must be kept dry and within a certain temperature range.
Seeds vary greatly in size, shape, pattern, and color. The seeds of different plants are made in different ways. There is one kind of seed, for example, that has the tiny new plant in the center. Around this is stored food which will tide the young plant over until it has developed roots and leaves and can make its own food.
If a seed is fertile, has rested, and has received the moisture, oxygen, and warmth, it begins to grow. This is called “sprouting” or “germination.” Growth often starts when moisture reaches the seed. As the seed absorbs water, it swells. As chemical changes take place, the cells of the seeds begin to show life again and the tiny young plant within the seed begins to grow. Most parts of the seed go into the growing plant. The seed cover drops off and the new plant grows larger until it matures and makes seeds of its own.
Seeds may be small or large. Begonia seeds are so small they look like dust. Coconuts are seeds which may weigh as much as 40 pounds! Some plants have only a few dozen seeds, while others, such as the maple, have thousands. There are special ways seeds are made so that they will be spread. Burr-type seeds hitch a ride on the fur of animals. Seeds that stick in mud cling to animals feet. Seeds contained in fruit are carried by man and animals. Some seeds have "wings" and are blown by the wind, other seeds float on water, and some are even "exploded" away from the parent plant!
15. Which sequence correctly represents the
arrangement of structures containing genetic
material, from the largest to the smallest size?
Answer:
The correct sequence that represents the arrangement of structures containing genetic material, from the largest to the smallest size, is:
Chromosomes: These are the largest structures that contain genetic material. Chromosomes are made up of DNA and proteins and are visible under a microscope during cell division.
Genes: These are segments of DNA that contain instructions for making proteins. Genes are located on chromosomes and are the basic unit of inheritance.
DNA: This is the genetic material that carries the instructions for the development and function of all living organisms. DNA is a long, double-stranded molecule made up of nucleotides.
Nucleotides: These are the building blocks of DNA. Each nucleotide is made up of a sugar molecule, a phosphate group, and a nitrogenous base. There are four types of nitrogenous bases: adenine, thymine, cytosine, and guanine.
Base pairs: These are the complementary nitrogenous bases that pair up to form the rungs of the DNA ladder. Adenine pairs with thymine, and cytosine pairs with guanine. The sequence of base pairs determines the genetic code.
Explanation:
Which of the following should be avoided in a patient with a history of severe anaphylactic reaction to sulfa medications? A. Amiloride B. Hydrochlorothiazide C. Mannitol D. Spironolactone E. Triamterene
Hydrochlorothiazide should be avoided in a patient with a history of severe anaphylactic reaction to sulfa medications. The correct option to this question is B.
Drug allergy In addition to electrolyte problems, orthostatic hypotension, hyperglycemia, and photosensitivity, hydrochlorothiazide (HCTZ) is a sulfonamide-containing medication with a long history of side effects.In patients with a history of sulfonamide allergy, the concern of hypersensitivity to loop or thiazide diuretics is raised since it is believed that there is a possibility of cross-reactivity from common sulfonamide ingredients of these drugs. Allergists are consulted in this situation.A more severe or rash-like reaction to sulfa medications is known as a sulfa allergy. From eye infections to rheumatoid arthritis, these medications can be used to treat a variety of medical conditions. (RA). Antibiotics and other medications are classified as sulfa medicines, often known as sulfonamides. Most frequently, medications cause allergies.For more information on sulfa allergy kindly visit
https://brainly.com/question/4903983
#SPJ1
2. What are two examples of how nuclear power can damage ecosystems? (10 points)
Answer:
Nuclear power has the potential to damage ecosystems in several ways, including:
Thermal pollution: Nuclear power plants require a large amount of cooling water, which is often discharged back into the environment at a higher temperature. This thermal pollution can harm aquatic ecosystems by reducing the amount of oxygen in the water, altering the water chemistry, and affecting the behavior and distribution of aquatic organisms.
Radioactive contamination: Nuclear accidents or leaks can release radioactive materials into the environment, which can harm both terrestrial and aquatic ecosystems. These materials can be taken up by plants and animals, leading to the bioaccumulation and biomagnification of the radioactive substances in the food chain. This can result in genetic mutations, reduced reproductive success, and increased mortality rates in exposed organisms.
Overall, the potential environmental impacts of nuclear power underscore the importance of implementing appropriate safety measures and considering the potential consequences before embarking on any nuclear power projects.
Explanation:
Identify the highlighted structure
This highlighted nerve structure is identified as the phrenic nerve.
What is the function of parasympathetic part of the autonomic nervous system in a human body?The parasympathetic part of the autonomic nervous system is responsible for monitoring the physiological actions related to rest and digestion. In contrast, the fight and flight responses of the body are monitored and regulated by the sympathetic part.
Hence, in the image of the model of the nervous system, the highlighted part with a bilateral structure positioned at the neck region (C3 to C5 zone of the spinal nerves) is identified as the phrenic nerve.
The nervous system of any organism can be described as the body system that exerts regulatory control over the entire body. The organs of the nervous system process the information related to each body part and generate a response command as per the processed information.
There are two divisions of the nervous system; one is the central division while the other is denoted as the peripheral division. The peripheral division comprises nerve fibers that link the body to the units of the central nervous division.
The autonomic nervous system is a part of the peripheral division which is further subdivided into two groups; sympathetic and parasympathetic. The highlighted portion in the image is a nerve that is located between the C3 to the C5 region of the spinal nerves of the neck. Structurally, the highlighted nerve is a bilateral nerve that descends downwards.
To know more about autonomic nervous system, visit:
https://brainly.com/question/29103450
#SPJ1
2. Igneous rocks form differently in different locations.
A. Intrusive igneous rock formation: (4 points)
Where do intrusive igneous rocks form?
• How quickly do intrusive igneous rocks cool?
physical proce
• What size is the crystal in an intrusive igneous rock?
ntary rocks forme
rocks formed through che
B. Extrusive igneous rock formation: (4 points)
• Where do extrusive igneous rocks form?
• How quickly do extrusive igneous rocks cool?
What size is the crystal in an extrusive igneous rock?
Intrusive igneous rocks form beneath the Earth's surface. These rocks are formed when magma slowly cools and solidifies beneath the surface, and the slow cooling allows enough time for crystals to grow and form.
Extrusive igneous rocks form on the Earth's surface. These rocks are formed when lava or magma erupts onto the surface and cools quickly due to exposure to air or water.
How are Intrusive and Extrusive igneous rocks formed?Intrusive igneous rocks cool very slowly due to their formation process beneath the Earth's surface. The slow cooling results in the growth of large crystals in the rock.
The crystals in intrusive igneous rocks are typically large and visible to the unaided eye. This is because of the slow cooling process, which allows for the growth of crystals over a long period of time.
Extrusive igneous rocks cool very quickly due to their formation process on the Earth's surface. Rapid cooling results in the formation of small or no crystals in the rock.
The crystals in extrusive igneous rocks are typically very small or may be absent altogether due to the rapid cooling process, which does not allow enough time for crystals to form and grow. This results in a fine-grained or glassy texture in the rock.
Learn more about intrusive and extrusive igneous rocks at: https://brainly.com/question/23555197
#SPJ1
Explain how chronic alkalosis could lead to demineralization of bone.
Answer:
Chronic alkalosis is a condition characterized by an increase in the pH of the blood above the normal range of 7.35 to 7.45. It can occur due to various factors, including respiratory disorders, kidney diseases, and prolonged vomiting. Alkalosis can affect the body's ability to regulate calcium and phosphorus, which are essential minerals for the growth and maintenance of bone tissue.
The pH of blood plays a critical role in the regulation of bone metabolism. Alkalosis can increase the pH of blood, which, in turn, can lead to an increase in the excretion of calcium through the urine. This increase in calcium excretion can lead to a decrease in the level of calcium in the blood, which is a condition known as hypocalcemia. The body attempts to compensate for hypocalcemia by increasing the secretion of parathyroid hormone (PTH), which is responsible for regulating calcium levels in the blood.
PTH increases calcium levels in the blood by stimulating bone resorption, which is the breakdown of bone tissue to release calcium into the bloodstream. The calcium released from bone tissue helps to restore normal blood calcium levels. However, prolonged bone resorption can lead to a decrease in bone density and strength, which can result in demineralization of bone tissue.
In chronic alkalosis, the increase in PTH secretion can lead to increased bone resorption and decreased bone density, which can result in demineralization of bone tissue. This can lead to a condition called osteopenia, which is a precursor to osteoporosis, a disease characterized by weak and brittle bones that are at a high risk of fracture.
In summary, chronic alkalosis can lead to demineralization of bone tissue by disrupting the balance of calcium and phosphorus in the body and increasing bone resorption through the actions of PTH.
Explanation:
it comes down to electrons & chemical bonding of atoms
demineralization means mineral atoms are being attracted by something else & leaving the bone
ph levels means a chemical is an acid base
pH less than 7 is acidic over 7 is a base.
forsyth.org
Alkalosis and Demineralization.
Chronic alkalosis is a condition characterized by a persistent increase in the pH level of blood (means more base) , which means the blood becomes more basic than normal. This condition can lead to the demineralization of bone due to the effect it has on the body's regulation of calcium.
The body's calcium balance is tightly regulated by several hormones, including parathyroid hormone (PTH) and calcitonin. PTH, in particular, plays a crucial role in maintaining calcium levels by stimulating the release of calcium from bone tissue into the bloodstream. However, chronic alkalosis can interfere with this process.
In chronic alkalosis, there is a decrease in the levels of carbon dioxide in the blood. This can lead to a compensatory increase in the excretion of bicarbonate ions by the kidneys. Bicarbonate ions are alkaline, and their loss from the body can help to correct the pH imbalance. However, bicarbonate ions also play a crucial role in buffering the acidity of the extracellular fluid that surrounds bone tissue. When the extracellular fluid becomes too alkaline, it can stimulate the release of calcium from bone tissue to help restore the acid-base balance. Over time, this can lead to a loss of calcium and other minerals from bone tissue, resulting in demineralization and an increased risk of fractures.
In summary, chronic alkalosis can disrupt the body's regulation of calcium, leading to an increased release of calcium from bone tissue. This can ultimately result in the demineralization of bone and an increased risk of fractures.
chatGPT
b What are the effects of heat on egg
Answer:
decrease in zootechnical performance and eggshell thickness, increase in egg breakage, and unchanged egg shape index.
Explanation:
How can studying individuals with damage to a particular brain region provide insight into the normal function of that region? Use an example of a region of the brain as an example as well as homeostasis terminology to explain your answer.
Evidence that the damaged area of the brain is crucial for the normal activity that is obstructed or altered is provided by brain damage that impairs behaviors, cognition, memory, or other functions.
What are homeostasis' four components?Homeostasis involves at least four interacting parts: stimulus, sensor, control center, and effector, regardless of whether the variable is kept within its usual range. The variable that is being regulated provides the stimulus.
What mechanism controls homeostasis?Feedback Control. When a receptor detects a rise in body temperature (stimulus), a signal is sent to the brain, causing it to maintain homeostasis (response). Negative feedback will cause the response to terminate once the body temperature returns to normal.
To know more about brain visit-
https://brainly.com/question/8384895
#SPJ1
The Effect of Salinity
5. Infer Purple loosestrife is a highly invasive plant that thrives in the low-salinity areas of marshes. In some places, however, people have managed to remove the species. Looking at the data here, what do you think has contributed to the narrowing of the range of loosestrife in the marsh over the course of ten years?
Based on the data shown here, the increase in the salinity of the marsh has contributed to the narrowing of the range of loosestrife in the marsh over the course of ten years.
What is the effect of increasing salinity on marsh plants that thrives in the low-salinity areas of marshes?Marsh plants that thrive in low-salinity areas of marshes such as Purple loosestrife are adapted to grow in freshwater or slightly brackish water environments. Increasing salinity can have a negative impact on these plants and their growth.
One effect of increasing salinity is that it can disrupt the balance of water and salt uptake in the roots of marsh plants. As the salt concentration in the soil or water increases, it can create an osmotic gradient that makes it more difficult for the roots to absorb water. This can cause the plant to become dehydrated, which can affect its ability to photosynthesize and grow.
Another effect of increasing salinity is that it can cause the accumulation of salt in the leaves and stems of the plant. As salt levels increase, the plant may begin to show signs of salt damage, such as leaf burn or wilting. If the salt accumulation becomes severe enough, it can even cause the plant to die.
Learn more about salinity at: https://brainly.com/question/2562564
#SPJ1
Why is eating pizza an external source of energy for the body? Why is ATP an internal source of energy?
Answer:
Eating pizza provides the body with an external source of energy because it contains nutrients such as carbohydrates, fats, and proteins that can be broken down by the body's digestive system to release energy. Once these nutrients are absorbed into the bloodstream, they are transported to the body's cells where they are used as fuel to generate ATP (adenosine triphosphate), the primary energy currency of the body.
On the other hand, ATP is an internal source of energy because it is produced by the body's own metabolic processes. ATP is synthesized through cellular respiration, a series of chemical reactions that occur within the cells of the body. During this process, nutrients such as glucose are broken down to release energy, which is then used to synthesize ATP. Once formed, ATP can be used by the body's cells to power a wide range of biological processes such as muscle contraction, protein synthesis, and nerve impulse transmission.
In summary, external sources of energy such as food provide the raw materials that the body needs to synthesize ATP internally, which is then used as the primary source of energy for various cellular processes.
Explanation:
Nucleic acids are polymers of nucleotides. What parts of nucleotides are joined
together in both DNA and RNA to make these polymers?
The parts of nucleotides that are joined together in both DNA and RNA to make these polymers are the phosphate group, the pentose sugar, and the nitrogenous base.
What are nucleotides?Nucleotides are the building blocks of DNA and RNA. They are made up of a five-carbon sugar (deoxyribose or ribose), a phosphate group, and one of four nitrogenous bases (adenine, guanine, cytosine, and thymine). Each nucleotide is made up of a single nucleotide monomer, which is a molecule composed of a single nucleobase, a pentose, and a phosphate group.
DNA nucleotides come in four different varieties since there are four naturally occurring nitrogenous bases:
Adenine (A), Thymine (T), Guanine (G), and Cytosine (C) (C).Learn more about nucleotides here:
https://brainly.com/question/14067588
#SPJ1
PLSS HELP WHAT IS THE ANSWER
Write the name of the model that describes cell membrane’s structure.
Answer:Fluid mosaic model
Explanation:
How does the existence of a site like Cactus Hill demonstrate the challenges that archaeologists face when making theories? Write a one- or two-sentence response.
The findings of archaeologists are based on cactus uncovered across a wide region. It's not always possible to pinpoint exact dates, and scientists do not often agree on the information that the evidence reveals. It's possible for new discoveries to refute established notions.
They view Cactus Hill as important because it contradicts widely accepted theories about Paleoindian migration. The claim that members of the Clovis civilization were the first widely dispersed settlers in the Americas is known as the "Clovis first hypothesis," which the majority of anthropologists today reject.
Native American camping grounds may be found in Sussex County at the Cactus Hill Archaeological Site, which is close to the Nottoway River.
They discovered several human-made artefacts. The older the artefacts, the older they are! The ancient hunters' spearheads, known as CLOVIS points, were discovered.
Learn more about cactus
https://brainly.com/question/16636755
#SPJ1
As sediment is transported by erosion it can become sorted by grain size. True or false
Answer: True
Explanation: As sediment is transported by erosion, it can become sorted by grain size. The reason for this is because gravity forces the heavier particles to settle out first, while the lighter and smaller particles are carried further. This process is called sorting; sorting can render the separation of particles by grain size as it is transported by erosion.
What is used to model the movement of energy through an ecosystem? O Food Chain O Food web O Food pyramid O All of the above
Answer:
Food Pyramids.
Explanation:
To show the flow of energy through ecosystems, food chains are sometimes drawn as energy pyramids. Each step of the pyramid represents a different trophic level, starting with primary producers at the bottom. The width of each step represents the rate of energy flow through each trophic level.
Summarize the three phases of the female's ovarian cycle.
Answer:
Follicular phase: This is the first phase of the ovarian cycle and begins on the first day of menstruation. During this phase, several follicles in the ovary begin to grow and develop. Eventually, one of the follicles becomes dominant and continues to grow while the others degenerate. The dominant follicle releases estrogen, which stimulates the endometrium of the uterus to thicken.
Ovulatory phase: This is the second phase of the ovarian cycle and occurs around day 14 of a 28-day cycle. The dominant follicle ruptures and releases a mature egg, which is swept into the fallopian tube. This is known as ovulation.
Luteal phase: This is the final phase of the ovarian cycle and begins after ovulation. The ruptured follicle transforms into the corpus luteum, which produces progesterone. Progesterone prepares the uterus for pregnancy by thickening the endometrium and preparing it to receive a fertilized egg. If fertilization does not occur, the corpus luteum degenerates, and the levels of estrogen and progesterone decrease, leading to menstruation and the start of a new ovarian cycle.
Explanation:
Fluid mosaic model diagram
The fluid mosaic model represents the model of the cell membrane showing the phospholipid bilayer as well as the proteins, lipids, and carbohydrates that are found on the cell membrane.
What is the fluid mosaic model?The fluid mosaic model explains a number of findings about how functional cell membranes are built.
This biological model proposes that protein molecules are encapsulated within a lipid bilayer. The membrane is flexible and flowing due to the fluid nature of the phospholipid bilayer as well as the proteins and lipids present.
Learn more about the fluid mosaic model at: https://brainly.com/question/18793994
#SPJ1
3. Pyroclastic flows are highly explosive and dangerous.
A. What would be the viscosity of magma if it results in a pyroclastic flow? (3 points)
B. What is the silica content of magma that would result in a pyroclastic flow? (2 points)
Magna with a pyroclastic flow would have a high viscosity. B. The magma that would cause a pyroclastic flow typically has a high silica content—usually more than 70%.
Pyroclastic flows: what are they?During an eruption of a volcano, pyroclastic flows are swift currents of hot gas and volcanic matter. They are capable of traveling at extremely high speeds and can pose a significant threat to anything in their path.
What kind of volcanic eruption is affected by magma viscosity?The magma's resistance to flow is measured by its viscosity. Magma with a high viscosity that is thick and sticky tends to hold gas bubbles inside, resulting in explosive volcanic eruptions. Typically, pyroclastic flows are associated with silica-rich, highly viscous magmas that hold gas bubbles that rapidly and violently expand during an eruption.
Learn more about pyroclastic flows:
brainly.com/question/11735635
#SPJ1
At terminal velocity, the force of air resistance pushing up on a skydiver is equal in magnitude to the force of gravity pulling down upon him. If at 5000 feet up in the air, he reaches a terminal velocity of 120 mph downward, what will his velocity be when he pulls the chute at 2000 feet?
Fnet = 0 at terminal velocity. As a result, the force of gravity (the person's weight) and the drag force on the skydiver must be equal.
What happens to a skydiver's motion when the force of gravity and air resistance are equal while they are falling?A balance of forces is reached and the skydiver stops accelerating after the force of air resistance equals the force of gravity. According to reports, the skydiver had achieved a terminal velocity.
When the object reaches the point when the force of gravity downward equals the force of air resistance upward?The force of gravity and the force of upward air resistance will eventually balance each other out. There is no longer any acceleration at this stage because the forces are balanced. The increase in speed will stop. The object has attained its maximum velocity or speed.
to know more about terminal velocity here:
https://brainly.com/question/2654450
#SPJ1
what is the molairty if a solution that contains 10 g of NaCl dissolved in 150ml of water?
The molarity of the solution is 1.14 M. t is denoted by the symbol M and has units of moles per liter (mol/L).
What is Molarity?
Molarity is a useful way to express the concentration of a solution because it takes into account both the amount of solute and the volume of the solution. For example, a solution that contains 1 mole of solute in 1 liter of solution has a molarity of 1 M.
To calculate the molarity of a solution, we need to know the number of moles of solute (NaCl) and the volume of solution in liters (L).
First, let's calculate the number of moles of NaCl:
Number of moles = mass of solute ÷ molar mass
The molar mass of NaCl is 58.44 g/mol (22.99 g/mol for Na + 35.45 g/mol for Cl). Therefore:
Number of moles = 10 g ÷ 58.44 g/mol = 0.171 mol
Next, let's convert the volume of solution from milliliters (mL) to liters (L):
Volume of solution = 150 mL ÷ 1000 mL/L = 0.150 L
Now we can calculate the molarity (M) of the solution:
Molarity = 0.171 mol ÷ 0.150 L = 1.14 M
Therefore, the molarity of the solution is 1.14 M.
Learn more about Molarity from given link
https://brainly.com/question/14469428
#SPJ1
recall what is dissolved in the water in the xyelm
Answer:
Once water is in the xylem, it travels upwards - against the force of gravity - towards the rest of the plant. Water is able to move against gravity due to two forces: tension and cohesion. Tension is a 'sucking force' which is created when water evaporates from leaves (transpiration), pulling more water into the leaf.
Explanation:
Movement of Water and Minerals in the Xylem. Most plants obtain the water and minerals they need through their roots. The path taken is: soil -> roots -> stems -> leaves. The minerals (e.g., K+, Ca2+) travel dissolved in the water (often accompanied by various organic molecules supplied by root cells).
Answer:
mineral salts
Explanation:
The diagram shows part of a grasshopper's respiratory system. Air passes into and out of openings in its sides. These openings are connected to tubes and air sacs that fill with air. The air tubes branch into tiny tubes that spread out and are found close to all cells. So, unlike other animals, the grasshopper does not exchange gases using its circulatory system. Air sac Openings Tubes F
The statement "the grasshopper does not exchange gases using its circulatory system" is true.
How is the circulatory system of the grasshopper?The description of the grasshopper's respiratory system in the given diagram suggests that the gas exchange occurs through a system of air tubes and sacs that connect to the openings on the sides of the grasshopper's body.
This system is separate from the circulatory system and allows oxygen to diffuse directly from the air tubes to the cells.
Learn more about the circulatory system at: https://brainly.com/question/3597250
#SPJ1
40 divisions on the scale of an eyepiece graticule correspond to 16 small divisions on the stage micrometer. Each small division on the stage micrometer = 10 μm. 4 cells fit across 40 divisions of the eyepiece graticule. The length of each cell is: A 10 μm Β 40 μm C 40 mm D 10 mm
The length of each cell in the eyepiece division is option B which is 40 μm
Eyepiece division calculation.
In a microscope, the eyepiece graticule is a scale located in the eyepiece that helps to measure the size of microscopic objects. The stage micrometer, on the other hand, is a calibrated scale on the microscope stage that is used to calibrate the eyepiece graticule.
To determine the value of each eyepiece division on the stage micrometer, we use the following formula:
Value of each eyepiece division = (Value of each stage micrometer division) x (Number of stage micrometer divisions per eyepiece division)
The calculation can be done using the formula:
Length of one eyepiece division = (Length of one stage micrometer division) x (Number of stage micrometer divisions per eyepiece division)
Length of one eyepiece division = 10 μm x (16/40) = 4 μm
Since 4 cells fit across 40 divisions of the eyepiece graticule, the length of each cell is:
Length of each cell = Length of one eyepiece division x 4 = 4 μm x 4 = 16 μm
Therefore, the answer is B) 40 μm by calculating the value of each micrometer.
Learn more about microscope below.
https://brainly.com/question/820911
#SPJ1