Answer:
the correct answer is D
To pass a test with 15 questions how many can I get wrong?
Answer:
You can get 7 answers wrong.
Explanation:
Let's calculate the average
[tex]\frac{15}{2} \\\\=7.5[/tex]
So if you correctly answer 8 -15 (7.5 is approximated to 8 )questions correctly you will pass.
So you can get 7 answers wrong.
The end result of ecological succession is called?
1.) Primary Ecosystem
2.) Secondary Ecosystem
3.) Climax Community
4.) none of these
How do tectonic plates move at convergent subduction boundaries? Insert a drawing with the arrows that show the movement
Answer:
If two tectonic plates collide, they form a convergent plate boundary. Usually, one of the converging plates will move beneath the other, a process known as subduction. ... As the sinking plate moves deeper into the mantle, fluids are released from the rock causing the overlying mantle to partially melt.
Why do you think Earth's plates move on the surface?
Explanation:
heat in the Earth's core
Isopentyl acetate is the molecule largely responsible for the aroma and taste of bananas. It is made up of carbon, hydrogen, and oxygen. Combustion of a 3.256-g sample of isopentyl acetate produces 7.706 g CO2 and 3.156 g H2O. Using these results, what is the correct empirical formula for isopentyl acetate?
Answer:
Explanation:
7.706 g of CO₂ will contain 12 x 7.706 / 44 g of C
= 2.1 g of C .
This will be contained in 3.256 g of isopentyl acetate
3.156 g of H₂O will contain 2 x 3.156 / 18 g of H
= .351 g of H
This will be contained in 3.256 g of isopentyl acetate
Rest will be oxygen
amount of oxygen in 3.256 g of isopentyl acetate
= 3.256 - ( 2.1 + .351 )
= .805 g
ratio of C , H , O in isopentyl acetate
= 2.1 g : .351 g : .805 g
2.1 / 12 : .351 / 1 : 0.805 / 16 ratio of moles
= .175 : .351 : .05 ratio of moles
= 3.5 : 7.02: 1
= 7 : 14 : 2
empirical formula of isopentyl acetate
= C₇ H₁₄ O₂ .
Help! I am in a hurry! Will get brainliest if correct!
Answer:
nonmetel
Explanation:
Answer:
Its a non-metal
Explanation:
Elements that tend to gain electrons to form anions during chemical reactions are called non-metals. These are electronegative elements. They are non-lustrous, brittle and poor conductors of heat and electricity (except graphite). Non-metals can be gaseous, liquids or solids.
HELP ME PLEASE!!! I NEED THIS OR I WILL FAIL!!!
Answer:
replacement
Explanation:
Because the No and The Ci switch but it might not be the answer but I know that they have to switch and replacement sounds like the best answer
Answer:
Oxidation
Explanation:
Hope this helps :)
What is the formula for mass number?
Answer:
the formula for mass number is "mass number = protons + neutrons".
Convert 2.5 x 102km to mm.
Convert 188 dL to L
3. Which element is a nonmetal? *
1 point
Nitrogen (N)
Iron (Fe)
Titanium (Ti)
Potassium (K)
How many grams of nickel 58.69 (No,58.69 g/mol) are in 1.57 moles of nickel
Answer:
92.1
Explanation:
1.57 * 58.69
A year has 365 days, and a day has 24 hours. If an hour has 60 minutes and a minute has 60 seconds, how many seconds are there in 1 year?
54,750 s
525,600 s
3.15 Times. 107 s
1.89 Times. 109 s
Answer:
31,536,000 seconds
Explanation:
off google
Answer:
3.15 x 10^7s
Explanation:
What part of the earth are the plate tectonics on?
lithosphere
outer core
asthenosphere
inner core
HELP!
A. W
B. X
C. Y
D. Z
Answer:
B
Explanation:
argon is an inert gas give reason.
Answer:
You're right
Argon is an inert gas.
Explanation:
Answer:
Argon is in zero group and it has octet structure so argon will not react with any compound
How are oxidation states of transition metals indicated in the names of metal
compounds?
A. Prefixes are used to indicate oxidation states.
B. Group numbers are used to indicate oxidation states.
C. Roman numerals are used to indicate oxidation states.
D. Subscripts are used to indicate oxidation states.
Answer:
The anser is c
Roman numerals are used to indicate oxidation states. Hence, option C is correct.
What is the oxidation state?An oxidation state is a number given to the atom of an element when participating in a chemical reaction.
Roman numerals are used to indicate oxidation states of transition metals.
The names for transition metal compounds often have roman numerals in them, because the roman numerals indicate the charge on the transition metal. But the oxidation state of Cu in CuO is +2, and the oxidation state of Cu in [tex]Cu_2O[/tex] is +1. Name metal first and charge and transition metal with a roman numeral.
The transition metals may form more than one ion, thus it is needed to be specified which particular ion we are talking about. This is indicated by assigning a Roman numeral after the metal. The Roman numeral denotes the charge and the oxidation state of the transition metal ion.
[tex]Fe^{2+}[/tex] would be named iron (II) and [tex]Fe^{3+}[/tex] would be named iron (III).
Hence, option C is correct.
Learn more about the oxidation state here:
brainly.com/question/11313964
#SPJ2
The ____ energy of an object increases with its height.
Thermal
Chemical potential
Gravitational Potential
kinetic
Answer:
chemichal potential
Explanation:
Answer:
Gravitational Potential
A divalent metal oxide contains 60 % of metal. What is atomic weight of metal ?
Atomic weight of metal : 24
Further explanationProust states the Comparative Law that compounds are formed from elements with the same Mass Comparison so that compounds have a fixed composition of elements
Divalent metal oxide=XO
MW O = 16
MW XO₂ = X+16
[tex]\tt \%mass=\dfrac{Ar~X}{X+16}\times 100\%\\\\0.6=\dfrac{X}{X+16}\\\\0.6(X+16)=X\\\\0.6X+9.6=X\\\\0.4X=9.6\rightarrow X=24[/tex]
What is a rule for determining the mass number of an atom or ion?
Answer:
The mass number of the atom is equal to the sum of the number of protons and neutrons in the nucleus
Explanation:
Each proton and each neutron weigh one amu( atomic mass unit), adding together the neutrons and protons and multiplying by 1 amu you get the mass of an atom
Suppose that green spheres represent chlorine atoms, yellow-green spheres represent fluorine atoms, white spheres represent hydrogen atoms, and all the molecules are gases
Answer:
a. Reactants: F₂ and HCl molecules
Products: Cl₂ and HF
b. 4HCl + 2F₂ ----> 4HF + 2Cl₂
c. Single replacement reaction
Note: The question is not complete. The complete question is found below as well as in the attachment.
Suppose that green spheres represent chlorine atoms, yellow-green spheres represent fluorine atoms, white spheres represent hydrogen atoms, and all the molecules are gases:
a. write a formula for each of the reactants
b. write a balanced equation for the reaction
c. indicate the type of reaction as combination,decomposition, single replacement, double replacement, or combustion
Explanation:
a. From the models shown in the diagram, The reactants are F₂, HCl while the products are Cl₂ and HF respectively
b. Equation for the reaction is given below;
4HCl + 2F₂ ----> 4HF + 2Cl₂
c. The reaction is single replacement reaction such that fluorine gas molecules replace the chlorine atoms in hydrogen chloride to form hydrogen fluoride with the liberation of chlorine atoms as gaseous molecules.
Using dimensional analysis, how many kilometers are there in 34 inches?
Answer:
There are many ways to figuring this out: you could use a ruler, a calculator or scrap paper.
Explanation:
This is not an actual flat out answer, but it’s helpful methods to getting the answer the next time you are stuck. Hope you are having a nice day. Bless your heart and soul.
Glycerol has a density of 1.26g/mL. What is the mass of 3000.mL of glycerol?
How long does it take for new fossil fuels to be created?
A.millions of years
B.billions of years
C. thousands of years
D. hundreds of years
Answer:
millions of years sometimes even hundred of millions of years
Answer:
How long does it take for new fossil fuels to be created?
Explanation: so it takes 65 million years to creat new fossil fuels so i think it may be A.millions of years i am sorry if i am wrong but i do beleave i am right
find the molar mass of this
Explanation:
Given problem:
Find the molar mass of:
SO₃ and C₁₀H₈
Solution:
The molar mass of a compound is the mass in grams of one mole of the substance.
To solve this, we are going to add the individual atomic masses of the elements in the compound;
Atomic mass;
S = 32g/mol; O = 16g/mol; C = 12g/mol and H = 1g/mol
For SO₃;
= 32 + 3(16)
= 32 + 48
= 80g/mol
For C₁₀H₈
= 10(12) + 8(1)
= 120 + 8
= 128g/mol
I will pick the brainiest answer! Thanks! :)
1. What is volume displacement? Why would you use this method?
2. What is density? What happens to things that are denser? What happens if they are less dense?
Answer:
1. The volume of displaced fluid is equivalent to the volume of an object fully immersed in a fluid or to that fraction of the volume below the surface of an object partially submerged in a liquid. The weight of the displaced portion of the fluid is equivalent to the magnitude of the buoyant force.
Why would you use this method?
So it can be used to accurately measure the volume of the human body and other oddly shaped objects by measuring the volume of fluid displaced when the object is submerged.
2. Density, mass of a unit volume of a material substance. The formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is commonly expressed in units of grams per cubic centimetre.
What happens to things that are denser?
Students should realize that if an object weighs more than an equal volume of water, it is more dense and will sink, and if it weighs less than an equal volume of water, it is less dense and will float.
What happens if they are less dense?
The density of an object determines whether it will float or sink in another substance. An object will float if it is less dense than the liquid it is placed in. An object will sink if it is more dense than the liquid it is placed in.
The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car's motion?
OA. It's not moving
OB. It's moving at a constant speed.
OC. It's moving at a constant velocity.
OD
It's speeding up.
If 0.484J of heat is added to 0.1372g of water, how much will the temperature increase?
0.263 °C
0.927 °c
0.843 °C
0.460 °C
Answer:
ΔT = 0.843 °C
Explanation:
Given data:
Heat added = 0.484 J
Mass of water = 0.1372 g
Temperature increase = ΔT = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
Specific heat capacity of water is 4.184 j/g.°C
Now we will put the values in formula.
0.484 j = 0.1372 g × 4.184 j/g.°C× ΔT
0.484 j = 0.574j/°C× ΔT
ΔT = 0.484 j / 0.574j/°C
ΔT = 0.843 °C
A sealed plastic bottle of apple juice is placed in freezer. Which statement describes what is happening while the juice is changing form a liquid to a solid?
A.) Kinetic energy is increasing. B.) Particle motion is coming to a complete stop.
C.) Particle speed is staying the same.
D.) Temperature is decreasing steadily.
Your answer is B Particle motion is coming to a complete stop.That's your answer!
Hope this helps!!!
Answer:
B
Explanation:
i have the same test
GIVING BRAINLY, FOLLOW, 5 STARS AND HEARTS
which of the following is NOT a characteristic of hot water heating systems?
Answer:
The one on the top,'' As the water cool, it is returned to the boiler where it is heated,''
Explanation:
What is the value of index fossils to the fossil record?