HELP ME! PLEASE! SOMEONE! THIS QUESTION IS VERY HARD! THERE ARE 3 ANSWERS! HELP ME PLEASE! MAKE SURE TO EXPALIN
Question:
The teacher told Fatima that all types of energy are kinetic energy, potential energy, or both. Fatima drew this diagram to help her organize this information. She then sorted each type of energy into its correct category: chemical, electrical, electromagnetic, mechanical, nuclear, and thermal.

Three of the types of energy can be either kinetic or potential energy. Identify these three types. For each type, explain why it can be either kinetic or potential.

Answer:

2917.4 m/s

Explanation:

From the question given above, the following data were:

Gravitational acceleration of the Moon (g) = 0.25 times the gravitational acceleration of the earth

Radius (r) of the Moon = 1737 Km

Escape velocity (v) =?

Next, we shall determine the gravitational acceleration of the Moon. This can be obtained as follow:

Gravitational acceleration of the earth = 9.8 m/s²

Gravitational acceleration of the Moon (g) = 0.25 times the gravitational acceleration of the earth

= 0.25 × 9.8 = 2.45 m/s²

Next, we shall convert 1737 Km to metres (m). This can be obtained as follow:

1 Km = 1000 m

Therefore,

1737 Km = 1737 Km × 1000 m / 1 Km

1737 Km = 1737000 m

Thus, 1737 Km is equivalent to 1737000 m

Finally, we shall determine the escape velocity of the rocket as shown below:

Gravitational acceleration of the Moon (g) = 2.45 m/s²

Radius (r) of the moon = 1737000 m

Escape velocity (v) =?

v = √2gr

v = √(2 × 2.45 × 1737000)

v = √8511300

v = 2917.4 m/s

Thus, the escape velocity is 2917.4 m/s

Answer: in the Newton concluded that objects fall because they are pulled by Earth's gravity. Einstein's interpretation was that these objects do not fall.

Explanation: These objects and Earth just freely move in a curved spacetime and this curvature is induced by mass and energy of these objects. - I HOPE THAT HELPED!!

Answer:

Explanation:

the net force on the right left is 25 N and is directed upward

the net force on the left one is zero because 200N force act upward and 200N force act downward so both cancel each other and net force is zero

i hope this will help you

The net force on the right left is 25 N and is directed upward.

The net force on the left one is zero because 200 N force act upward and 200 N force act downward so both cancel each other and net force is zero.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

By looking at both figure we get idea of net force after calculation,

The net force on the right left is 25 N and is directed upward.

The net force on the left one is zero because 200 N force act upward and 200 N force act downward so both cancel each other and net force is zero.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

Answer:

-150 N

Explanation:

(Newton's second law) F=ma

Sum of forces in Y direction= (+200 N)+(-200 N)= 0...

forces cancel, object does not accelerate up/down

Sum of forces in X direction= (+65 N)+(-65 N)+(-150 N)

= -150 N

notice that the +/- 65 components cancel, leaving a net force of 150 N in the LEFTwards direction (which is typically defined as negative)

Overall, the net force is -150 N

Answer:

Explanation:

Step one:

given data

initial speed u= 5m/s

time t= 3seconds

acceleration due to gravity g= 9.8m/s^2

Required:

the final velocity v

Step two:

applying the first equation of motion

v=u+gt-----------we used + because the ball is falling with gravity

v=5+9.8*3

v=5+29.4

v=34.4

The final velocity is 34.4m/s

Answer:

-34.4

Explanation:

the person above had the right approach but it would be negative as it is in a downwards motion

Answer:

1.Conduction.

2.Convection.

3.Radiation.

Explanation:

I'm sure it's correct

Answer:

Conduction, Convection and Radiation

Explanation:

Hope this helps!

Answer:

0.138889 m/s2

Explanation:

The average acceleration of the vehicle would be 0.139 meters/second².

The rate of change of the velocity with respect to time is known as the acceleration of the object.

As given in the problem a truck accelerates from 25 kilometers/hour to 45  kilometers/hour in 40 seconds.

Let us first convert the velocities from kilometers/hour to meters/seconds

25 kilometers/hour ⇒ 25×1000/3600

                                    = 6.94 meters/seconds

45 kilometers/seconds =  45×1000/3600

                                       = 12.5 meters/seconds

acceleration = change in the velocity/time

                     =(12.5 -6.94)/40

                     =0.139 meters/second²

Thus, the acceleration of the truck would be 0.139 meters/second²

To learn more about acceleration from here, refer to the link;

https://brainly.com/question/16768483

#SPJ2

Answer:

35.28m/s; 63.50m

Explanation:

Given the following data;

Time, t = 3.6 secs

Since it's a free fall, acceleration due to gravity = 9.8m/s²

Initial velocity, u = 0

To find the final velocity, we would use the first equation of motion;

[tex] V = u + at[/tex]

Substituting into the equation, we have;

[tex] V = 0 + 9.8 * 3.6[/tex]

V = 35.28m/s

Therefore, the final velocity of the penny is 35.28m/s.

To find the height, we would use the second equation of motion;

[tex] S = ut + \frac {1}{2}at^{2}[/tex]

Substituting the values into the equation;

[tex] S = 0(3.6) + \frac {1}{2}*9.8*(3.6)^{2}[/tex]

[tex] S = 0 + 4.9*12.86[/tex]

[tex] S = 0.5 *36[/tex]

S = 63.50m

Therefore, the height of the tower is 63.50m.

Answer:

a= 1 m/s^2

Explanation:

Average acceleration can be found by dividing the change in velocity by the time.

a= ΔV/t

The change in velocity is the difference of the final velocity and initial velocity.

ΔV= final velocity - initial velocity

The final velocity is 30 m/s and the initial velocity is 25 m/s

ΔV= 30 m/s- 25 m/s

ΔV= 5 m/s

The time is 5 seconds.

Now we know the two values.

ΔV= 5 m/s

t= 5 s

Substitute the values into the formula.

a= 5 m/s / 5 s

Divide.

a= 1 m/s/s

a= 1 m/s^2

The average acceleration of the car is 1 meter per second squared.

Explanation:

Given that,

Christina drives her moped 7 kilometers North. She stops for lunch and then drives 5 kilometers East. At first she traveled North and then East. They are perpendicular to each other.

Total path traveled = distance covered by an object

D = 7 km + 5 km = 12 km

Shortest path covered = Displacement

[tex]d=\sqrt{7^2+5^2} \\\\d=8.6\ km[/tex]

For direction :

[tex]\tan\theta=\dfrac{d_y}{d_x}\\\\\tan\theta=\dfrac{7}{5}\\\\\theta=\tan^{-1}(\dfrac{7}{5})\\\\\theta=54.46^{\circ}[/tex]

She is moving in the direction of 54.46 degrees.

Answer:

Force = 533.33N

Explanation:

Given the following data;

Power = 40000watt

Velocity = 75m/s

To find the force;

[tex] Power = force * velocity [/tex]

Making force the subject of formula, we have;

[tex] Force = \frac {Power}{velocity}[/tex]

[tex] Force = \frac {40000}{75} [/tex]

Force = 533.33N

Answer:

Road A = 8 meters Wet

Road B = 2 meters Muddy

Road C = 12 meters Dry

Explanation:

Answer:

If the car is initially travelling at u m/s, then the stopping distance d m travelled by ... the speed of the car at the instant the brakes are applied. ... Common usage will force us to depart from this later in the notes. ... The history of these equations is not absolutely clear, but we do have some ... Newton (1642–1727) and Leibniz.

Explanation:

hope this helped

Answer:

...........................

Answer:

True

Explanation:

Answer:

Displacement is how far you are between your initial and finishing position.

Distance is how far you went.

Explanation:

For example, using a baseball field... if the sides are each 100 m..

A batter runs to third base... what is his displacement and distance?

Since the batter ran to 3rd base, it means he ran 300 m to get to 3rd base but his displacement is 100 m becuase that's how far they are from home plate. (which was their starting position)

So the answer to my example above would be:

Distance: 300 m

Displacement: 100 m

I hope this helped you.

Answer:

The musculoskeletal system involves the complex interactions of muscles, bones, and connective tissues.

When a muscle contracts, a bone will move. When a bone contracts, a muscle will move. When a ligament contracts, a tendon will move.

Answer:

A. when a muscle contracts , a bone will move

Explanation

thats the correct answer to this question on edg2021 :)

Answer:

rs 900

Explanation:

the process is given

Answer:

?

Explanation:

The ship will speed up while the engine is firing.

Whatever speed it has when the engine cuts off, it will continue at that speed (and in a straight line) from then on, because there's no force acting on it, so it can't have any acceleration.

That's the 3rd choice.

Answer:

Total distance = 6.5 km

Explanation:

Let the distance be denoted by the vectors drawn from A, B, C, D, E, and F.

Then the distance covered can be calculated by adding the vectors in the direction given.

Total distance = 3km + 1km+ 1.5km+ 0.5km+ 0.5km

Total distance = 6.5 km

If we were to find the displacement ( shortest distance) then the head to tail rule would be applied using the vectors.

Explanation:

s = ut + 1/2 a t^2

375 = 0 * 5 + 1/2 * a * (5)^2

375 = 1/2 * a * 25

a = 375*2/25

a = 15* 2

a = 30m/sec^2

v = u + at

v = 0 + 30 * 5

v = 150 m/sec

hope it helps you

Field lines become straight and perpendicular because every point of circular loop the concentric circles become larger and larger as we move away from the wire.

Answer: velocity

Explanation: v/t

Answer:

280N

Explanation:

f = mass x acceleration

Answer:

cookie

Explanation:

The genetic material of an offspring of sexually reproducing organisms is best described as genes from both parents in unique combinations.

SEXUAL REPRODUCTION:

Learn more at: https://brainly.com/question/11622266?referrer=searchResults

Answer: C.) Efficiency

Explanation: Edge 2020 good luck ^__^

Answer:

What shouldJerome always keep constant for each object after the objects collide and bounce apart? That would be Mass.

Answer:

B: Mass

Explanation: