Answer:
Presentation
Explanation:
Information is being presented to an audience (this makes sense).
A template can be used to organize the information that is to be given to the audience.
Speaker notes only help the speaker give the information to the audience.
Slide how toolbar is only for creating the slideshow that can be used to help the audience understand what the speaker is saying.
las develops this algorithm to compute the calories burned for an activity for a given number of minutes and body weight: if the activity is running, compute caloriespermin by dividing weight by 10.5 if the activity is walking, compute caloriespermin by dividing weight by 15.5 compute numcalories by multiplying caloriespermin by numminutes he implements the algorithm in an app, and users soon ask for the ability to compute the total calories for multiple sessions of walking or running. what structure must be added to the original algorithm so that it can compute the total across multiple sessions?
The structure that must be added to the original algorithm so that it can compute the total across multiple sessions is: iteration structure.
An iteration structure is required to compute the total calories for multiple sessions of walking or running. Therefore, to add an iteration structure to the original algorithm to compute the total across multiple sessions, the following must be done: Declare a variable to hold the total number of calories burned across all sessions. Set the total to 0.Set the number of sessions to the total number of sessions. Add a loop statement that will iterate over the sessions and perform the following:Inside the loop, set the calories for the current session. Set the number of minutes for the current session. Add the calories for the current session to the total.Set the loop to terminate when all the sessions are completed.
Learn more about algorithm: https://brainly.com/question/24953880
#SPJ11
term consider two communication technologies that use the same bandwidth, but technology b has twice the snr of technology a. if technology a has an snr of about 1,000 and a data rate of about 50kbps, technology b has a data rate of a. 50kbps b. 100kbps c. 55kbps d. cannot be estimated with the available data definition c. 55kbps
Assuming that technology A operates with an SNR of 1,000 and a data transfer rate of roughly 50kbps, technology B then has a data rate of 55 kbps. Therefore, the correct option is C.
The formula to calculate the data rate is given by;
Data rate = bandwidth × log2 (1 + SNR)Where bandwidth = Given SNR = Signal-to-Noise Ratio
The SNR is given as 1000 for Technology A and twice the SNR of Technology A for Technology B.
Hence, the SNR for Technology B is given by;
SNR B = 2 × SN RA = 2 × 1000 = 2000Substituting the values of bandwidth and SNR in the above formula for Technology A, we get;
Data rate A = 50 × [tex]10^{3}[/tex] × log2 (1 + 1000)≈ 50 × [tex]10^{3}[/tex] × log2 (1001)≈ 50 × [tex]10^{3}[/tex]× 9.97≈ 498.5 kbpsSimilarly, substituting the values of bandwidth and SNR in the above formula for Technology B, we get;
Data rate B = 50 × [tex]10^{3}[/tex] × log2 (1 + 2000)≈ 50 × [tex]10^{3}[/tex] × log2 (2001)≈ 50 × [tex]10^{3}[/tex] × 10.96≈ 548 kbpsHence, the data rate for technology B is approximately 55 kbps.
Learn more about the data rate at https://brainly.com/question/3521381
#SPJ11
*¿Qué requisito debe cubrir el reciclado de dispositivos
de los equipos de computo para el cuidado del medio
ambiente?
evanbot suggests first drawing a stack diagram. remember to include the stack canary in your diagram. according to your stack diagram, which of the following are vulnerable to being overwritten by user input as a result of the gets calls, without causing the program to crash?
According to the stack diagram, the variables that are vulnerable to being overwritten by user input as a result of the gets calls, without causing the program to crash, are the local variables and the saved frame pointer.
This is because the gets function does not check for the size of the input, so it is possible for the user to input a string that is larger than the size of the local variables, causing the input to overwrite the saved frame pointer. However, the stack canary, which is placed between the local variables and the saved frame pointer, can help detect this type of attack and prevent the program from crashing. Therefore, the stack canary is not vulnerable to being overwritten by user input as a result of the gets calls.
Learn more about stack diagram
https://brainly.com/question/29206756
#SPJ11
assume you start off with 4 empty buffer frames, and that, when a page is requested, it is brought in and pinned as normal, and then immediately unpinned before the next page request. hint: see note 5 for a detailed explanation of the clock policy as it may be different from similar policies taught in other courses.
In the scenario described in the question, the buffer pool starts off with 4 empty frames. When a page is requested, it is brought in and pinned as normal, and then immediately unpinned before the next page request.
This means that the clock hand will always be pointing to an unpinned frame when a new page is requested, so the new page will always be brought in to the frame that the clock hand is pointing to, and the clock hand will be moved to the next frame. This will continue until all 4 frames are filled, at which point the clock hand will be pointing back to the first frame and the process will repeat.
The clock policy is a page replacement algorithm that is used to determine which page should be removed from the buffer pool when a new page needs to be brought in. It operates by keeping track of a "clock hand" that points to one of the buffer frames.
When a page is requested, the algorithm checks if the page is already in the buffer pool. If it is, the page is pinned and the clock hand is moved to the next frame. If the page is not in the buffer pool, the algorithm checks the frame that the clock hand is pointing to. If the frame is unpinned, the page in that frame is removed and the new page is brought in. If the frame is pinned, the clock hand is moved to the next frame and the process is repeated until an unpinned frame is found.
Learn more about The clock policy:
https://brainly.com/question/28269175
#SPJ11
If you encounter a bug (which is rare) in one of the open source tools, how do you think you could get it fixed?
Answer:
Answers from a former class
Explanation:
Step 1: download the code. Before I could investigate the bug, I needed to be sure I could build the code myself and run the tests. ...
Step 2: run the tests. Once I had the code, I needed to figure out how to run the tests. ...
Step 3: find a failing test. ...
Step 4: fix the bug. ...
Step 5: open a pull request.
you are working with a database table that contains invoice data. the customer id column lists the id number for each customer. you are interested in invoice data for the customer with id number 7. you write the sql query below. add a where clause that will return only data about the customer with id number 7. 12345 select * from invoice reset after you run your query, use the slider to view all the data presented. what is the billing country for the customer with id number 7? 1 point france brazil austria poland
To acquire details about customer 7, the SQL query must contain the clause "WHERE customer id = 7". Without looking at the provided data, the billing nation cannot be identified.
What is the length of a customer ID?A bank can identify a customer and their personal information by using their Customer Identification File (CIF) number, an 11-digit number. The CIF number, commonly known as the "CIF ID," is specific to each customer.
Do the invoice ID and number match up?Each invoice is given a specific, sequential number that is known as the invoice number, invoice ID, or reference number. This code is employed to quickly identify, monitor, and prevent any double payments from occurring. Numerals, letters, or a combination of the two may make up the value.
To know more about SQL visit:-
https://brainly.com/question/13068613
#SPJ1
which of the following type of media is most commonly used in backbone networks because of its high capacity? question 5 options: fiber un-shielderd twister pair shielded twisted pair coax cable
Fiber is the type of media most commonly used in backbone networks because of its high capacity.
The part of a computer network that joins together other networks or network segments and provides a path for exchange of data among them is known as the backbone network. The backbone network is a common infrastructure that is used by various networks to connect to one another. A backbone network may be wired or wireless and use various types of media to transport data, but the most common media used in backbone networks is fiber optic cable.Fiber optic cables are a type of networking cable that is made up of thin strands of glass or plastic that can transmit digital data over long distances at high speeds. Fiber optic cables are immune to electrical interference and can transmit data over long distances without signal loss. Fiber optic cables are most commonly used in backbone networks because of their high capacity and low latency, which makes them ideal for use in large networks that need to transmit large amounts of data quickly and reliably.Learn more about Fiber here: https://brainly.com/question/901213
#SPJ11
3)(scan design) suppose that your chip has 100,000 gates and 2,000 flip flops. acombinational atpg program produced 500 vectors to fully test the logic. a single scanchain design will require about 106 clock cycles for testing. (a)find the scan test length including the scan register test if 20 scan chains areimplemented. (b)given that the circuit has 20 primary input and 20 primary output data pins, and onlyone extra pin can be added for test (test control tc) pi, how much more gate overhead willbe needed for the new design? assume the cost of normal data flip flop is 10 gates and the mux is 4 gates. hint: the gate overhead
Answer: a) To find the scan test length including the scan register test if 20 scan chains are implemented, we can use the formula:
Explanation:
Scan Test Length = (Number of Clock Cycles * Number of Scan Chains) + (Number of Vectors * Number of Scan Chains)
Plugging in the given values, we get:
Scan Test Length = (106 * 20) + (500 * 20)
= 2,120 + 10,000
= 12,120 clock cycles
Therefore, the scan test length including the scan register test if 20 scan chains are implemented is 12,120 clock cycles.
(b) To add a test control (TC) pin, we need to add a multiplexer to the design, which selects between the normal data input and the test control input for each flip flop. The gate overhead for the multiplexer is 4 gates per flip flop. Additionally, we need to add a test control input buffer, which introduces an overhead of 10 gates.
So, the total gate overhead for adding the test control pin is:
Gate Overhead = (Number of Flip Flops * 4) + 10
= (2,000 * 4) + 10
= 8,010 gates
Therefore, we need an additional 8,010 gates for the new design with the test control pin.
SPJ11
Need help with this, been on it for hours
You should see the following code in your programming environment:
import simplegui
def draw handler (canvas):
frame simplegui.create_frame('Testing', 600, 600)
frame.set_canvas background("white")
frame.set_draw_handler(draw_handler)
frame.start()
Use the code above to write a program that draws a target. Your program should create an image similar to the one below:
Your image does not need to be exactly the same as the one above, but can have slight modifications (for example, your image can use a
different color or different positioning of objects).
KX
The corrected code is given as follows;
import simpleguitk as simplegui
# Constants for the target
CENTER = [300, 300]
RADIUS = 50
GAP = 20
COLORS = ['red', 'white', 'red', 'white', 'red']
def draw_handler(canvas):
# Draw the target using circles of alternating colors
for i in range(len(COLORS)):
canvas.draw_circle(CENTER, RADIUS + GAP * i, 2, 'black', COLORS[i])
# Create the frame and set its properties
frame = simplegui.create_frame('Target', 600, 600)
frame.set_canvas_background('white')
frame.set_draw_handler(draw_handler)
# Start the frame
frame.start()
What is the explanation for the above?This code creates a window with a white background and draws a target using circles of alternating red and white colors.
The circles are centered at the point [300, 300], with the radius of the outermost circle being 50 and the gap between circles being 20. The draw_handler function is responsible for drawing the target using the canvas.draw_circle() method, and is set as the draw handler for the frame using the frame.set_draw_handler() method. Finally, the program starts the frame using the frame.start() method.
Learn more about code at:
https://brainly.com/question/30353056
#SPJ1
As a general rule, the greater a game's playability, the less fun it is.
True Or False
Answer:
False
Explanation:
Some people like a challenge, because without a challenge it'd be boring.
Which step is missing from the repetition strategy? read, write, say, revisit a. reread b. rewrite c. rest d. recover
The missing step from the repetition strategy is (b) rewrite. Option (a) reread, option (c) rest, and option (d) recover are not typically part of the repetition strategy.
The repetition strategy typically includes the following steps:
Read the material or information that you want to learn.Write down what you learned or take notes.Say the information out loud or explain it to someone else.Revisit the material or review your notes periodically to reinforce your learning.Rewrite the information from memory or in a different format to deepen your understanding and improve retention.Rest and recover are not typically included as steps in the repetition strategy, although they are important for overall learning and memory consolidation.To learn more about repetition strategy visit;
https://brainly.com/question/4227802
#SPJ4
Calculate the total time (in milliseconds) required to send a file of size of 8000 bytes. Assume one-way propagation delay of 40 milli second on a link with bandwidth of 0. 8 x106 bytes/second and a packet size of 1000 bytes where data packets can be sent continuously with no packet loss. Please fill in just the value and not any units. For example if the answer is 40 msec, just write 40
The total time required to send a file of size 8000 bytes is 41.25 milliseconds.To calculate the total time required to send a file of size 8000 bytes, we need to consider two types of delays: propagation delay and transmission delay.
The propagation delay is given as 40 milliseconds (ms), and we need to convert the file size from bytes to bits by multiplying it by 8. Therefore, the propagation delay in bits is:
Propagation delay = 40 ms = 40 x 10^-3 s
File size = 8000 bytes = 64000 bits
The transmission delay can be calculated by dividing the packet size (1000 bytes = 8000 bits) by the link bandwidth (0.8 x 10^6 bytes/second = 6.4 x 10^6 bits/second), which gives us:
Transmission delay = packet size / link bandwidth
Transmission delay = 8000 bits / 6.4 x 10^6 bits/second
Transmission delay = 1.25 x 10^-3 seconds
Since we can send data packets continuously with no packet loss, we do not need to consider any other types of delays. Therefore, the total time required to send the file can be calculated as:
Total time = propagation delay + transmission delay
Total time = 40 x 10^-3 s + 1.25 x 10^-3 s
Total time = 41.25 ms
Thus, the total time required to send a file of size 8000 bytes is 41.25 milliseconds.
Find out more about total time
brainly.com/question/14473164
#SPJ4
A penetration tester is tasked with gaining information on one of your internal servers and he enters the following command: telnet server1 80. What is the purpose of this command?
Answer:
As a penetration tester, the purpose of using this command could be to check whether the web server is accessible and whether it is responding to requests on port 80. By establishing a connection to port 80 using telnet, the tester can send HTTP requests and see if the server responds with the expected HTTP headers or content.
Explanation:
This command can be used to gather information about the server, such as the web server software being used, the version of the software, and other configuration details. This information can be useful in identifying vulnerabilities and weaknesses that could be exploited to gain unauthorized access to the server.
what is step 2 in the POP technique?
An approach to problem-solving employed in law enforcement is the POP technique, commonly referred to as the Problem-Oriented Policing technique. The method entails a methodical procedure of identification
The pop technique is what?POP Model: Process, Purpose, and Result. Introduction to Purposeful Activity. Our time and energy are limited resources. As leaders, we want to discover how to produce more tangible outcomes with less work (and unintended side effects)
What song was Steps' debut?"5,6,7,8," Steps' first single, was released in 1997 and peaked at number 14 on the UK Singles Chart. It is still one of the most popular singles that never cracked the top 10 in the UK. Their second single, "Last Thing on My Mind," reached number six in the UK and became their first top ten hit.
To know more about technique visit:-
https://brainly.com/question/14491844
#SPJ1
Assignment 5: Design a Ringtone
For this assignment, you will code a ringtone in EarSketch that incorporates the following Python commands:
You must use both of the EarSketch functions fitMedia() and setEffect() for an effect in your ringtone (such as a fade or distortion).
You must use string operations (concatenation or splicing) to create your own beat, using the EarSketch function makeBeat().
You must use for loops to add repetition to your ringtone.
You must use at least one user-defined (custom) function to create musical sections for your ringtone.
Your ringtone should be a minimum of 60 seconds and a maximum of 90 seconds (average length of a phone's ring).
Your ringtone should include a sound clip from Ciara or Common, found in the EarSketch sound library.
Your ringtone should appeal to high school students.
Your ringtone should use efficient code whenever possible (for example, using a for loop to repeat a section of music instead of writing the code for that section a second time), as most phones have only a small amount of memory available for ringtone downloads
creating a ringtone in EarSketch that meets the requirements listed. Here are some steps to follow:Choose a sound clip from Ciara or Common that will appeal to high school students.
Use the makeBeat() function to create your own beat using string operations, such as concatenation or splicing, to customize the rhythm and tempo.Use the fitMedia() function to incorporate the chosen sound clip into your ringtone.Use setEffect() to add an effect to your ringtone, such as a fade or distortion, to make it unique.Use for loops to add repetition to your ringtone, for example, repeating a specific musical section to create a catchy melody.Create a user-defined function to add variety to your ringtone and tocreate distinct musical sectionsTest your ringtone to ensure it meets the requirements and runs efficiently within the time frame of 60 to 90 seconds.Save your ringtone and share it with others.By following these steps, you can create a unique and appealing ringtone using EarSketch that incorporates the required Python commands and meets the specifications outlined.
To learn more about creating click the link below:
brainly.com/question/1389859
#SPJ4
What are the major constraints of a camp watchtower
A camp watchtower is a structure built to provide an elevated view of the surrounding area to enable the watchman to monitor the camp or its perimeter for any potential threats. However, there are some major constraints to consider when building a camp watchtower:
Limited visibility: A watchtower can only provide a limited view of the surrounding area, depending on its height and location. Obstacles such as trees or other structures can limit the view and reduce the effectiveness of the watchtower.Vulnerability to weather conditions: A watchtower can be vulnerable to harsh weather conditions such as high winds, heavy rain, or lightning strikes. This can compromise the integrity of the structure and make it unsafe for the watchman.Accessibility: The watchtower must be accessible to the watchman, which can be difficult in remote or rugged areas. If the watchtower is too difficult to access, it may not be used effectively.Maintenance: The watchtower requires regular maintenance to ensure its safety and effectiveness. This can be time-consuming and expensive, especially in remote locations.Cost: The construction of a watchtower can be expensive, and it may not always be a feasible option for small or low-budget camps.
To learn more about watchtower click the link below:
brainly.com/question/31055341
#SPJ4
a secret number is stored at the kernel address 0xfb10200. suppose the secret value is 1. what is going to happen when we run the following program on a cpu (which has out-of-order execution)?
Without knowing the program code, it is impossible to predict the outcome of the program on a CPU with out-of-order execution.
Without knowing the code of the program, it is impossible to predict the exact outcome. However, we can make some general observations about the behavior of CPUs with out-of-order execution.
Out-of-order execution is a feature of modern CPUs that allows them to execute instructions in a non-sequential order, in order to optimize performance. This means that the instructions in the program may be executed in a different order than they appear in the program code. This can potentially cause unexpected behavior if the program is not designed to handle out-of-order execution.
If the program accesses and manipulates the secret number stored at the kernel address 0xfb10200, the out-of-order execution may cause the program to read or write the wrong value. This can happen if the CPU executes an instruction that depends on the secret number before the instruction that actually reads or writes the secret number. Additionally, if the program is multithreaded or makes use of interrupts, the out-of-order execution may cause unexpected interactions between different parts of the program.
Learn more about tout-of-order execution here:
brainly.com/question/28315136
#SPJ1
which of the following account types is a cloud-based identity and access management service that provides access to both internal and external resources?answeradministratorazure admicrosoftdomain
The following account type is a cloud-based identity and access management service that provides access to both internal and external resources: Microsoft.
Cloud-based identity and access management (IAM) is a system that provides secure authentication and access controls to cloud applications, resources, and data. This IAM solution is delivered through the cloud, eliminating the need for physical hardware, reducing costs, and providing flexibility.Therefore, Microsoft is a cloud-based identity and access management service that provides access to both internal and external resources. It is a comprehensive, integrated solution that secures your digital transformation by protecting your business, streamlining user access, and enabling you to manage your IT environment more efficiently. Microsoft supports multi-factor authentication, risk-based conditional access, and identity protection to enhance security.Learn more about cloud-based here: https://brainly.com/question/19057393
#SPJ11
5. 20 LAB: Step counter A pedometer treats walking 2,000 steps as walking 1 mile. Write a program whose input is the number of steps, and whose output is the miles walked. Output each floating-point value with two digits after the decimal point, which can be achieved as follows: print('{:. 2f}'. Format(your_value)) Ex: If the input is: 5345 the output is: 2. 67 Your program must define and call the following function. The function should return the amount of miles walked. Def steps_to_miles(user_steps)
Answer:
def steps_to_miles(user_steps):
miles = user_steps / 2000.0
return miles
if __name__ == '__main__':
user_steps = int(input())
miles = steps_to_miles(user_steps)
print('{:.2f}'.format(miles))
Explanation:
The steps_to_miles function takes an integer user_steps as input and returns the equivalent number of miles as a float. The computation is straightforward: we divide the number of steps by 2000 to get the number of miles.
In the main program, we first read the user input as an integer using the input() function. We then call the steps_to_miles function with the user input as an argument, and store the result in the miles variable.
Finally, we print the value of miles with two decimal places using the print() function and the '{:.2f}' format specifier. This ensures that the output is in the correct format, with two digits after the decimal point.
who is more secure c++ or java?
Answer:
both programming languages have their strengths and weaknesses when it comes to security.
Explanation:
C++ is a low-level programming language that gives developers more direct control over the system's hardware and memory. While this can be useful for performance and efficiency, it can also make it easier to introduce vulnerabilities such as buffer overflow attacks if not used carefully.
Java, on the other hand, is a high-level programming language that runs in a virtual machine, which provides a layer of abstraction between the code and the system's hardware. This makes it less vulnerable to low-level attacks, but it can still be vulnerable to higher-level attacks such as SQL injection and cross-site scripting (XSS).
Injuries that don't have a logical explanation, such as broken bones in an infant, may be an effect of _____.
A)sexual abuse
B)emotional abuse
C)neglect
D)physical abuse answer
In a word processor, by default, evaluates ______ levels of headings when it builds the table of contents
My school Chromebook keeps typing "zcvx,m?>" and "?>VX
Answer:
try shutting down your laptop
For anyone Proficient in Python. I need help what am I doing wrong here?
if you are someone who uses codehs and did 4. 5. 4 Growing circle Python please help out I'll give all good points for you(SPAM ANSWERS WILL BE REPORTED)
What do you need assist with?
In this challenge lab, you explore the Windows Disk Management tool. You may have to research how to do some of the tasks. Once you are finished, you will answer some questions. You will need a second disk of at least 20 GB installed on your Windows computer.
Install a second disk on your Windows computer of at least 20 GB, if necessary.
Delete any existing partitions from the new disk.
1. Discussion Question
a. What type of disk is it: basic or dynamic?
Create a new 3 GB volume named Vol1 and format it using a file system that supports file and folder permissions. Use the default drive letter.
2. Discussion Questions
a. What format did you choose?
b. What type of partition was created (primary, extended, logical drive)?
Create three additional volumes of 3 GB each named Vol2, Vol3, and Vol4. Accept the default options each time.
3. Discussion Questions
a. For each partition, what was the partition type you created?
b. Explain what happened when you created the fourth volume.
Convert the disk to a dynamic disk. (Convert only the new disk you installed; do not convert Disk 0, which is the Windows boot disk.)
4. Discussion Question
a. How did this change the way the volumes and partitions are labeled?
Close Disk Management
1. The type of disk that was installed is a basic disk.
2. a. The format that was chosen for the new 3 GB volume named Vol1 is NTFS, as it supports file and folder permissions.
b. The type of partition that was created is a primary partition.
3. a. The partition type that was created for each of the three additional volumes (Vol2, Vol3, and Vol4) is a primary partition.
b. When the fourth volume was created, an extended partition was automatically created to accommodate the additional volume.
4. a. After converting the disk to a dynamic disk, the volumes and partitions are labeled differently. The primary partitions are now labeled as "simple volumes" and the extended partition is labeled as "spanned volume."
After converting the disk to a dynamic disk, the simple volumes can be combined into a single spanned volume, which allows the disk space to be used as a single logical volume. This spanned volume can be used to create multiple partitions of different sizes, and these partitions can be used to store data.
Learn more about dynamic disk
https://brainly.com/question/29770183
#SPJ11
dropa service or software application that relies on shared resources over the interneta software application that accesses web applications and websitespress delete to cleara company that provides access to the internetpress delete to clearan interconnected global public computer networkan information system that connects documents to each other by hypertext links
It seems like there are multiple questions in this post, so I will answer each one separately.
1. A service or software application that relies on shared resources over the internet is called cloud computing. Examples of cloud computing services include Go-ogle Dr-ive, Dro-pbox, and Micr-osoft One-Dr-ive.
2. A software application that accesses web applications and websites is called a web browser. Examples of web browsers include Go-ogle Ch-rome, Mo-zilla Fi-re-fox, and Micr-osoft Ed-ge.
3. A company that provides access to the internet is called an internet service provider (ISP). Examples of IS-Ps include Com-cast, A-T&T, and Veri-zon.
4. An interconnected global public computer network is called the internet.
5. An information system that connects documents to each other by hypertext links is called the W-orld W-ide W-eb.
Learn more about software :
https://brainly.com/question/28224061
#SPJ11
19. Select the WRONG IP address format. O9.24.258.0 124.122.56.12 O123.34.1.0 O254.23.1.1
The correct format is "octet.octet.octet.octet", where each octet is a number between 0 and 255.
09.024.258.000: incorrect
124.122.056.012: correct
123.034.001.000: correct
254.023.001.001: correct
What is IP address?An Internet Protocol address (IP address) is a numerical label that identifies a computer network that employs the Internet Protocol for communication. An example of such an IP address is 192.0.2.1. Identification of the network interface and location addressing are the two primary purposes of an IP address.
A 32-bit number is what the Internet Protocol version 4 (IPv4) defines as an IP address. However, a new version of IP (IPv6), utilizing 128 bits for the IP address, was established in 1998 in response to the expansion of the Internet and the exhaustion of IPv4 addresses. Deployment of IPv6 has been happening since the middle of the 2000s. Each device linked to a network is given an IP address by network administrators. Depending on network procedures and software, such assignments may be made on a static (fixed or permanent) or dynamic basis.
Learn more about IP address here:
https://brainly.com/question/16011753
#SPJ2
Which statement best describes the computers found in some newer
appliances?
O A. Many can be used as backups to store documents and other files.
B. Many can be swapped out with computers found in other
appliances.
OC. Many can perform a lot of other unrelated functions if you want
them to.
OD. Many can connect to other devices to communicate and share
information.
Answer:
Option D is correct because many newer appliances that incorporate computer technology, such as smart home devices and IoT devices, are designed to connect to other devices to exchange information and communicate with other systems. This is achieved through the use of various networking technologies, such as Wi-Fi, Bluetooth, and NFC, which enable these appliances to exchange data with other devices.
Option A is incorrect because newer appliances are typically not designed or intended to function as a backup for storing documents and other files. While some appliances may have storage capabilities, their primary purpose is not to provide backup storage.
Option B is incorrect because the computers used in newer appliances are often designed to meet the specific requirements of that appliance, and are not interchangeable with computers found in other appliances. Additionally, these computers are often integrated into the appliance's hardware, making it difficult or impossible to remove or swap out.
Option C is incorrect because while some newer appliances may have additional features or functions beyond their primary purpose, they are not designed to perform unrelated functions in the same way that a general-purpose computer can. These additional features are typically designed to enhance the appliance's primary functionality or improve user experience, rather than provide unrelated functions.
Provide existing code p5. Js what is the code for Double Drawing. Right: Isometric Figure (Cube) with progressively darker graduations of gray on each of three planes; Left: Isometric figure with red, yellow, and blue superimposed progressively on each of the three planes. The background is gray
Here's an example code snippet for drawing a right isometric figure (cube) with progressively darker gray graduations on each of three planes and a left isometric figure with red, yellow, and blue superimposed progressively on each of the three planes in p5.js:
function setup() {
createCanvas(400, 400);
}
function draw() {
background(220);
// right isometric figure
for (let i = 0; i < 5; i++) {
fill(200 - 40 * i);
noStroke();
beginShape();
vertex(50 + 50 * i, 100 - 25 * i);
vertex(100 + 50 * i, 100 - 25 * i);
vertex(100 + 50 * i, 125 - 25 * i);
vertex(50 + 50 * i, 125 - 25 * i);
endShape(CLOSE);
beginShape();
vertex(100 + 50 * i, 100 - 25 * i);
vertex(150 + 50 * i, 100 - 25 * i);
vertex(150 + 50 * i, 125 - 25 * i);
vertex(100 + 50 * i, 125 - 25 * i);
endShape(CLOSE);
beginShape();
vertex(50 + 50 * i, 100 - 25 * i);
vertex(100 + 50 * i, 100 - 25 * i);
vertex(150 + 50 * i, 100 - 25 * i);
vertex(100 + 50 * i, 75 - 25 * i);
endShape(CLOSE);
}
// left isometric figure
for (let i = 0; i < 5; i++) {
noFill();
stroke(255 - 20 * i, 255 - 20 * i, 0);
beginShape();
vertex(200 + 50 * i, 100 - 25 * i);
vertex(250 + 50 * i, 100 - 25 * i);
vertex(250 + 50 * i, 125 - 25 * i);
vertex(200 + 50 * i, 125 - 25 * i);
endShape(CLOSE);
beginShape();
vertex(250 + 50 * i, 100 - 25 * i);
vertex(300 + 50 * i, 100 - 25 * i);
vertex(300 + 50 * i, 125 - 25 * i);
vertex(250 + 50 * i, 125 - 25 * i);
endShape(CLOSE);
beginShape();
vertex(200 + 50 * i, 100 - 25 * i);
vertex(250 + 50 * i, 100 - 25 * i)
Find out more about Isometric Figure
brainly.com/question/1687539
#SPJ4