Answer:
convert not telling why but it was the answer I gave it says it was right
Momentum of an object is directly proportional to the mass of the object. The corvette has greater mass and thus more momentum it gains than the little fly.
What is momentum:Momentum of an object is the product of mass and velocity. Thus momentum is directly proportional to the mass and velocity of the object. This relation of momentum with mass and velocity is defined by Newton's law of motion.
According to Newton's third law of motion every reaction has an equal and opposite reaction. Thus if apply a force on object it may return a force but that will depend on the mass and direction.
When the fly hit the moving corvette, the greater impulse will be for the fly since it is very less in mass compared to that of the corvette. The momentum of corvette is higher because velocity and mass of the corvette is significantly higher than that of fly.
To know more on momentum, refer here:
https://brainly.com/question/24030570
#SPJ2
light enters glass from air. the angle of refraction will be: group of answer choices less than the angle of incidence. equal to the angle of incidence. greater than the angle of incidence
Less than the angle of incidence, the angle of refraction will exist.
What is angle of refraction?Angle of refraction refers to the angle formed by the refracted ray and the normal at the point of incident.
In a mirror, the angle of incidence and angle of reflection are the same. If the incident ray falls along the normal, the angle of incidence for a plane mirror is 0 degrees rather than 90 degrees.
The behavior of light is described by Fermat's principle, which states that a light ray always chooses the shortest route to its destination. On reflection, the exact same behavior is seen. The angle of incidence and the angle of reflection are equal when a ray is reflected from a plane.
To know more about angle of refraction visit:
https://brainly.com/question/19863856
#SPJ4
what is the loudness and softness of music related to specifically? multiple choice question. beats of two tones that are similar in frequency tone color of the instrument producing the sound frequency of the vibration that produces the sound amplitude of the vibration that produces the sound
The correct answer choice from above among loudness and softness of music in a wave system is connected by means of amplitude of the vibration that produces the sound.
The correct answer choice is option d.
How the loudness and softness of music is linked with amplitude.In general, the amplitude of a wave of a music is related to how soft or loud a music is as this depends largely on that force of vibration in the the musical system. For instance, when you hit the the wooden or iron door of a building, a soft sound is produced. This happens simply because amplitude.
Be that as it may, a wave is referred to as a disturbance which travels through a particular medium, transferring energy from one point to another point.
So therefore, the amplitude of a wave goes a long way to determine the loudness and softness of music.
Read more on amplitude:
https://brainly.com/question/19036728
#SPJ1
If a car can go from 0-69mi/hr in 8.0 seconds, what would be its final speed after 5.0 seconds if it’s starting speed was 50mi/hr
If a car can go from 0 - 69 mi/hr in 8.0 seconds, then the final speed after 5.0 seconds would be 41.6 m/s, if its starting speed was 50 mi/hr.
What is Velocity?The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.
The acceleration of the car If a car can go from 0-69mi/hr in 8.0 seconds,
69 miles / hour = 69 × 1609 / 3600
= 30.83 m / s
v = u + at
30.83 = 0 + a × 8.0
a = 30.83 / 8.0
= 3.85 meters / second²
50 miles per hour = 50 × 1609 / 3600
= 22.35 m / s
The velocity of the car after 5 seconds,
v = 22.35 + 3.85 × 5
= 41.6 m / s
Thus, the velocity of the car after 5 seconds would be 41.6 m / s.
To learn more about Velocity here, refer to the link ;
brainly.com/question/18084516
#SPJ1
Imagine a black hole lacking any accretion disk whatsoever. Would this black hole produce any light? why?.
Once a beam of light enters a black hole, it can never exit.
Moreover, A black hole is a region where space-time is so curved that every possible path that light could take eventually curves back inside the black hole. As a result, once a beam of light enters a black hole, it can never exit. Because of this, a black hole is truly black and never emits light. It appears as a dark circle silhouetted by an orbiting disk of hot, glowing matter. The supermassive black hole is located at the heart of a galaxy called M87, located about 55 million light-years away, and weighs more than 6 billion solar masses.
You can learn more through link below:
https://brainly.com/question/16363387
#SPJ4
the one component of the material of the milky way galaxy that prevents us from seeing and photographing the galactic center at optical wavelengths is the one component of the material of the milky way galaxy that prevents us from seeing and photographing the galactic center at optical wavelengths is very cold hydrogen gas. hot hydrogen gas. the glare of light from nearby stars. interstellar dust.
The one component of the material of the milky way galaxy that prevents us from seeing and photographing the galactic center at optical wavelengths is interstellar dust.
The Milky Way is a vast collection of stars dust and gas. It is called a spiral galaxy because it looks like a spinning windmill when viewed from above or below. The Sun is in one of the spiral arms about 25,000 light-years away from the center of the galaxy. Astronomers have released the first images of a supermassive black hole at the center of our Milky Way.
The results provide overwhelming evidence that this object is indeed a black hole and provide valuable clues about the workings of the giant galaxies thought to reside at the center of most galaxies. This extreme environment exposes you to intense UV and X-rays. But much of this activity is obscured from view by a huge plume of interstellar dust. The center of our Milky Way is hidden from the prying eyes of optical telescopes by clouds of dust and gas.
Learn more about The milky way here:-https://brainly.com/question/13956361
#SPJ1
a propeller is modeled as five identical uniform rods extending radially from its axis. the length and mass of each rod are 0.711 m and 2.99 kg, respectively. when the propellor rotates at 569 rpm (revolutions per minute), what is its rotational kinetic energy?
The rotational kinetic energy of five identical uniform rods is 9436.21 joule.
We need to know about rotational kinetic energy to solve this problem. Rotational kinetic energy can be defined as the energy of a rotating object. The magnitude of rotational energy is
KE = 1/2 . I . ώ²
where KE is rotational kinetic energy, I is inertia and ώ is angular velocity.
From the question above, the given parameters are
L = 0.711 m
m = 2.99 kg
N = 5
ώ = 569 rpm = 59.59 rad/s
Find the total inertia of five identical rods
I = N . 1/2 . m . L²
I = 5 . 1/2 . 2.99 . 0.711
I = 5.31 kg.m²
Calculate the rotational kinetic energy
KE = 1/2 . I . ώ²
KE = 1/2 . 5.31 . 59.59²
KE = 9436.21 joule
Find more on rotational kinetic energy at: https://brainly.com/question/25803184
#SPJ4
A bar magnet is cut into two pieces from the middle as shown in the figure. Mark the poles on these magnets if it is further broken into smaller pieces?
Giving brainliest!
If we cut the magnet into smaller pieces as we can see in the image attached to the question then each of the ends of the smaller magnets would form a north and south pole respectively.
What is a magnet?The term magnet can be used to describe the material that is able to pick up any magnetizable material. We have to note that a magnet is able to create a magnetic field around it. The magnetic field is the vicinity where the impact of the magnet can be felt.
We know that a magnet has two poles, the north pole and the south pole. These are the points where the influence of the magnetic field is greatest In this discussion, we must keep it at the back of our minds that the influence of the magnetic force is stronger at the ends of the magnet than it is at the center of the magnet as it were.
Learn more about magnet:https://brainly.com/question/2841288
#SPJ1
What is the equation for momentum (p)?
Answer:
p(momentum) = mass(kg) x velocity (m/s)
why does the sky appear blue in the day vs. red during sunset? I’m looking for an answer that explain s using light rays!!
Rayleigh scattering makes the sky appear blue in the day and red during sunset.
A clear, cloudless daytime sky is blue because molecules in the air scatter blue light from the sun more than red light. Sun at sunset, appears red or orange because blue light is scattered from your line of sight.
The white light of the sun is a mixture of all the colors of the rainbow. This was demonstrated by Isaac Newton by using a prism to separate different colors to form a spectrum. Colors of light are distinguished by different wavelengths.
The visible portion of the spectrum ranges from red light with a wavelength of about 720 nm to violet with a wavelength of about 380 nm, with orange, yellow, green, blue, and indigo in between. Her three types of color receptors in the retina of the human eye are most responsive to red, green and blue wavelengths, giving us color vision.
Learn more about Color spectrum of sky here:
https://brainly.com/question/13896652
a 0.230-kg block along a horizontal track has a speed of 1.40 m/s immediately before colliding with a light spring of force constant 3.75 n/m located at the end of the track. (a) what is the spring's maximum compression if the track is frictionless? m (b) if the track is not frictionless, would the spring's maximum compression be greater than, less than, or equal to the value obtained in part (a)? greater less equal
The spring's maximum compression is 0.346 when mass of the block is 0.230 Kg and Speed is 1.40 m/s.
given,
mass of block = 0.230 Kg
speed = 1.40 m/s
spring constant = k = 3.75 N/m
using conservation of energy
a) K.E = P.E
1/2mv^2=1/2kx^2
1/2*0.23*1.40^2=1/2*3.75*x^2
X^2=0.120
X=0.346
b) The maximum compression will be equal to the compression in part an if the track is not friction-less.
Learn more about the friction and friction-less here:
https://brainly.com/question/14259025
#SPJ4
A girl on a bridge throws a rock
straight down at -12.5 m/s. It hits
the ground 38.4 m below.
How much time did it take?
(Unit = s)
answer is: 1.80 as time
Vf = -30.1
The time that is taken for the rock to land on the ground from the given height is 1.8 seconds.
What is the time taken?We know that we can be able to obtain the time that have been taken from the equations of kinematics. In this case, we have to consider the equations of kinematics which have occurred under gravity.
Let us recall that we have the fact the equation that ought to be used here is;
h = ut + 1/2gt^2
u = initial velocity
h = the height attained
t = time taken
g = acceleration due to gravity
We know that in this case, we have to use the equations of the kinematics that we can apply to the rock that is moving under the influence of gravity as to obtain the tome that it would take the rock to be able to land on the ground from the height that we have been given in the question.
Having listed out these parameters;
38.4 = -12.5t + (0.5 * 9.8 * t^2)
38.4 = -12.5t + 4.9t^2
Hence;
4.9t^2 - 12.5t + 38.4 = 0
t = 1.80 s
Learn more about velocity:https://brainly.com/question/18084516
#SPJ1
The skater eventually comes to a stop.
What has happened to all of the skater's
original potential energy?
What is the magnitude of the velocity of the plane
We will have the following:
First, we are told that the wind accelerates directly northwest, that means that the angle of inclination is 45°, so the following is true:
[tex]\begin{gathered} \sum F_x=115-75cos(45) \\ \\ \sum F_y=75sin(45) \end{gathered}[/tex]Then:
[tex]\begin{gathered} v_f=\sqrt{(115-75cos(45))^2+(75sin(45))^2}\Rightarrow v_f=81.56229536... \\ \\ \Rightarrow v_f\approx81.6 \end{gathered}[/tex]So, the magnitude of the final velocity is approximately 81.6 m/s.
Given a block which is at rest on a perfectly flat smooth surface with no friction. You push with your hand horizontally on the block with some force. If the force on the block= 4.00 N and the block moves a distance of 2.00 m on the table, then what is the work done on the block? A) 1.29 JB) 8.00 JC) 9.31 JD) 3.65 JE) 4.57 J
ANSWER
B) 8.00 J
EXPLANATION
Given:
• The force applied to move the block, F = 4.00N
,• The distance the block is moved, d = 2.00 m
Unknown:
• The work done on the block, W
If there is no friction between the block and the table, the only force acting upon the block in the direction of movement is the applied force F. Since the force is applied in the direction of movement, then the angle between the force and the displacement is 0, so the work done on the block is,
[tex]W=F\times d=4.00N\times2.00m=8.00J[/tex]Hence, the work done on the block is 8.00 J.
The potential energy of a roller coaster is 50 joules. The kinetic energy of the same coaster is 50 joules. What is the mechanical energy of the coaster?.
Mechanical energy of the coaster is 100 joules.
We need to know about mechanical energy to solve this problem. Mechanical energy is the sum of the potential energy and kinetic energy of an object. It can be written as
E = KE + PE
where E is mechanical energy, PE is potential energy and KE is kinetic energy.
From the question above, the given parameters are
KE = 50 J
PE = 50 J
By substituting the given parameters, we can calculate mechanical energy
E = KE + PE
E = 50 + 50
E = 100 J
The total energy is 100 joules
Find more on mechanical energy at: https://brainly.com/question/24443465
#SPJ4
HELP!
A box is sitting on a frictionless surface when a net force of 15 N is applied to the right. If the acceleration of the box is 0.33 m/s2 to the right, what is the mass of the box?
a
2.0 kg
b
5.0 kg
c
18 kg
d
45 kg
Answer:
F=m × a - answer is D
Explanation:
F=15N
m=m
a=0.33
15÷0.33=45.45...
two boys hang by their hands from the same tree branch. the branch is straight, and grows out from the tree trunk at an angle of 30 degree above the horizontal. one boy, with a mass of 50.00 kg, is hanging 1.40 m along the branch from the tree trunk. the other boy, with a mass of 33.00 kg, is hanging 2.10 m from the tree trunk. what is the magnitude of the net torque exerted on the branch by the children? assume that the axis is located where the branch joins the tree trunk and is perpendicular to the plane formed by the branch and the trunk.
Magnitude offers products that automate and provide insights throughout the whole supply chain. Determine and emphasize any bottlenecks, potential delays, and urgent.
Calculation Magnitude?Magnitude offers products that automate and provide insights throughout the whole supply chain. Determine and emphasize any bottlenecks, potential delays, and urgent.
The size of the undertaking would have discouraged a regular man due to its importance.
Magnitude is a way to gauge a star's brightness.
inclination of tree from horizontal =30°
mass of first child m[tex]1[/tex]=50kg
distance of first child r[tex]1[/tex]=1.4
mass of first child m[tex]2[/tex]=33kg
distance of first child r[tex]2[/tex]=2.10
Torque exerted by first child
T[tex]1[/tex]=m[tex]1[/tex] cos 0*r1
T1=50*9.8 cos27*2*1.4
=489.7513N-M
Torque exerted by second child
T2=m2 cos0*r2
T2=33 *9.8cos27*2
=292.7374
Both torques are in same sense therefore
T[tex]net[/tex]=T1+T2
T[tex]net[/tex]=489.75+292.73
T[tex]net[/tex]=782.48N-m
To learn more about Calculation Magnitude refer to:
https://brainly.com/question/17462245
#SPJ4
An electric drill transfers some energy wastefully. Aside from heat, what else carries the energy that it transfers wastefully?
Answer:
Explanation:
Mechanical energy
Answer:
The right answer is "sound" or "sound waves"
Explanation:
Electric drills are noisy, but this is not useful, so sound is a wasted energy transfer.
An elevator in a hotel starts at ground level. It rapidly moves up to the third floor, where it stops to unload passengers. The elevator then descends to the basement at a slower speed than before.
Identify whether or not the graph correctly represents the story. Explain your answer in 1-2 sentences.
The graph does not correctly represent the story because the elevator descends to the basement at a faster speed than before.
What is the upward motion of an elevator?
An elevator going up shows uniform linear motion, as elevator will move in a straight line with a constant speed.
This type of motion can be shown using a straight line graph.
The downward motion of an elevator descending or moving downwards can be explained as follows;
An elevator moving downwards shows uniform linear motion, as elevator will move in a straight line with a constant speed.
From the given graph we can conclude the following;
During the upward motion of the elevator, at point A, the elevator moved up gradually.At point B the elevator maintained a constant speedduring the downward motion at point C, the moved down more quickly than during the upward motion.Thus, from the greater steepness of the downward motion of the elevator than the upward motion, we can conclude that the elevator descends to the basement at a faster speed than before.
Learn more about elevators here: https://brainly.com/question/28099673
#SPJ1
what is the magnitude n of the normal force on the block of mass m? (b) (5 points) what direction does the hanging block m move, up or down? circle one. (c) (18 points) what is the common magnitude a of the acceleration of the blocks? (d) (14 points) what is the magnitude t of the tension in the string? (e) (6 points) what is the speed of the hanging mass after a time period of 2.0 seconds?
a) The normal force on the block of mass M is 76.383 N in magnitude.
b) The hanging block goes upward in one direction.
c) The block's acceleration has a common magnitude of 8.11 m/s2.
d) The string's tension measurement is 161.19 N in magnitude.
e) After 2.0 seconds, the speed of the hanging mass is 5.695 seconds.
Simply put, "distance or quantity" is the definition of size. In terms of motion, it shows the absolute or relative size, direction, or movement of an object. It is used to describe something's size or scope. Magnitude in physics typically refers to size or quantity.
It's given that:
M = 45.2 kg.
µk = 0.10.
m = 9.0 kg.
angle = 30 degree
A) The block's mass M and the normal force's strength N:
N - mgcosθ = 0
= 9 * 9.8cos 30
= 76.383N
B) The hanging block's direction shifts upward.
C) the typical magnitude of the acceleration of the block is
Mg - T = Ma
(Mg - T) / M = a
(45.2 * 9.8 - 76.383) / 45.2 = a
[tex]8.11\frac{m}{s^{2} } = a[/tex]
D) the string's tension, T, in terms of magnitude
T - mg = ma
T = ma + mg
T = 9 * 8.11 + 9 * 9.81
T = 161.19N
E) the dangling mass's speed after a delay of 2.0 seconds
v² - u² = 2as
v² - 0² = 2as
v² = 2as
v = √2as
v = √2*8.11*2
v = 5.695 m/s
COMPLETE QUESTION: Two blocks are connected by a light but sturdy string wrapped around a mass-less pulley. The rough inclined surface makes an angle of 30 degrees with the horizontal. The block on the inclined surface has a mass M = 45.2 kg. Assume the coefficient of kinetic friction between the union of mass M and the inclined plane is µk = 0.10. The vertically hanging block has mass m = 9.0 kg. Assume the blocks begin their motion from rest.
(a) (10 points) What is the magnitude N of the normal force on the block of mass M?
(b) (5 points) In What direction does the hanging block m move, up or down? Circle one.
(c) (18 points) What is the common magnitude of the acceleration of the blocks?
(d) (14 points) What is the magnitude T of the tension in the string?
(e) (6 points) What is the speed of the hanging mass after a time period of 2.0 seconds?
To know more about the magnitude, refer to this link:
https://brainly.com/question/2596740
#SPJ4
a canon is firing horizontally from the high wall of a castle located in the midst of a flat plain. if i drop a canon ball from the wall where the canon is located, it it takes 3 sec to hit the ground. what do i need to know to find how far away from the wall the canon balls will land when fired from the canon? the exit velocity from the canon, only. no further information is needed. the height of the wall, only.
D=44.13, Horizontal velocity is unimportant. The time it takes the cannon ball to fall to the ground is the key to determining the height of the cliff. where that cannon is present.
The speed of any projectile travelling along a Horizontal velocity is known as the horizontal velocity. When a particle or object is launched into the air at an angle other than 90 degrees, it moves along the trajectory path and changes the shape of the curve to a parabolic one.
the speed at which velocity changes over time. Due to its magnitude and direction, acceleration is a vector quantity. The first derivative of velocity with respect to time or the second derivative of position with respect to time are further examples. This is called acceleration.
Distance to the ground is d = 1/2gt^2,
where g is the acceleration rate of gravity (9.80665 m/s^2)
and t = 3 secs.
d = .5×9.80665×9 = 44.13 m.
Learn more about horizontal velocity here
https://brainly.com/question/18084516
#SPJ4
Answer: D=44.13, Vertical velocity is not significant. The height of the cliff can be calculated using the time it takes the cannonball to hit the earth. where there is that gun.
Explanation: The horizontal velocity is the rate at which any projectile is moving along a plane. A particle or object that is propelled into the air at an angle other than 90 degrees goes along the trajectory line and transforms the curve's shape into a parabolic one.
the rate of change of velocity over time. Acceleration is a vector number because of its size and directional characteristics. Additional examples are the second derivative of location with respect to time or the first derivative of velocity with respect to time. Here is
Distance to the ground is d = 1/2gt^2,
where g is the acceleration rate of gravity (9.80665 m/s^2)
and t = 3 secs.
d = .5×9.80665×9 = 44.13 m
To know more about horizontal velocity click here
https://brainly.com/question/29450937?referrer=searchResults
#SPJ4
Brainliest!!
A football player kicks a football off a tee with a speed of 21 m/s at an angle of 51°.
a. What is the horizontal component of the velocity?
b. What is the vertical component of the velocity?
c. How long does it take the ball to reach its highest point?
d. What is the maximum height of the ball?
e. What is the total amount of time that the ball is in the air?
f. How far is the ball from the football player when it lands?
A football player kicks a football off a tee with a speed of 21 m/s at an angle of 51°, then the horizontal component of the velocity would be 15.58 m/s and the vertical component of the velocity would be 14.07 m/s.
What is a projectile motion?
It can be defined as the motion of any object or body when thrown from the earth's surface and follows any curved path under the effect of the gravitational force of the earth.
The horizontal component of the velocity = 21 × cos51 = 15.58 m/s
The vertical component of the velocity = 21 × sin51 = 14.07 m/s
Thus, the horizontal component of the velocity would be 15.58 m/s and the vertical component of the velocity would be 14.07 m/s.
Learn more about projectile motion here, refer to the link ;
brainly.com/question/11049671
#SPJ1
what is the speed of the block when it has moved a distance of 0.0150 m from its initial position? (at this point the spring is compressed 0.0220 m .)
The speed of the block when it has moved a distance of 0.0150 m from it's initial position is 0.32 m/s .
When a spring is compressed by a force F, the potential energy is stored on it.
If the spring is released, the potential energy turns into kinetic energy.
The object is replaced by the call-back force which occurs on the spring F' = K.∆x
K= 815 N/m
∆x= 0.0190 m
F' = 815.0.019 = 15.8 N
Ff= k.m.g
Ff = 0.35 . 2.55. 9.81 = 8.76 N friction force acceleration of object is-
a= F' - Ff/m
V^2 = 2.a . displacement
V^2 = 2.264. 0.0200.
V^2 = 0.1056
V=√0.1056.
V= 0.32 m/s
To know more about distance click
https://brainly.com/question/23848540.
#SPJ4
two objects were lifted by machine. one object had a mass of 2kg, and was lifted at a speed of 2m/s. the other had a mass of 4kg and was lifted at a rate of 3m/s. Which object had more potental energy while it was being lifted a distance of 10 meters?
The object having mass 4kg will have greater potential energy as it has larger mass.
What is potential energy ?
Potential energy is a form of stored energy that is dependent on the relationship between different system components. A spring's potential energy rises when it is compressed or stretched. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy. It is capable of performing more work when raised. Potential energy is a characteristic of systems rather than of particular bodies or particles; for instance, the system made up of Earth and the elevated ball has more potential energy as they become further apart.
U=m g h
The object having mass 4kg will have greater potential energy as it has larger mass.
To know more about potential energy from given link
https://brainly.com/question/21805075
#SPJ9
Help show how you got answers
The speed at which a wave of frequency of 14 Hz and a wavelength of 3 m will travel is 42 m / s
v = λ / T
f = 1 / T
v = f λ
v = Wave speed
λ = Wavelength
T = Time period
f = Frequency
f = 14 Hz
λ = 3 m
v = 14 * 3
v = 42 m / s
Frequency is the number of time an event occurs repeatedly in an unit amount of time. Its unit is hertz which in terms of SI unit is [tex]s^{-1}[/tex].
Therefore, the speed at which the wave will travel is 42 m / s
To know more about frequency
brainly.com/question/16861358
#SPJ1
The atomic number of aluminum is 13. What is the correct designation of the electron configuration of aluminum?.
Aluminum has the following electron configuration: 1s2, 2s2, 2p6, 3s2, and 3p1.
According to the information supplied, aluminum has an atomic number of 13. That makes it abundantly evident that the nucleus of any atom that is an isotope of aluminum will contain 13 protons. The proton number will be equal to the number of electrons surrounding the nucleus. There will be 13 electrons as a result.
Learn more about electron configuration here:
https://brainly.com/question/14283892
#SPJ4
what is the principal difference between a radio wave and light? what is the principal difference between a radio wave and light? radio waves have significantly higher frequencies than light. a radio wave is a mechanical vibration of matter and light is a vibration of electric and magnetic fields. radio waves have significantly lower frequencies than light. light is a mechanical vibration of matter and radio wave is a vibration of electric and magnetic fields.
The principal difference between a radio wave and light is that radio waves have significantly lower frequencies than light.
Explanation:
Both radio waves and light are electromagnetic waves; their main difference is their frequency. Radio waves have a lower frequency and longer wavelength than visible light waves. Light waves have a lower frequency and longer wavelength than X-rays.
To learn more:
https://brainly.com/question/14673771
it takes 5 seconds to change his velocity from 30 m/s to 40 m/s, what is his acceleration? 8) jack and tom are skiing down two separate incline planes. jack is a better skier, so he is on the incline making a larger angle to the horizontal. who experiences more acceleration along the slope? (ignore friction)
In mechanics, acceleration refers to the rate at which an object's velocity with respect to time varies. The acceleration is 8.
What is acceleration?In mechanics, acceleration is the rate at which an object's velocity varies with respect to time. They are vector quantities and accelerations. The acceleration of an object is determined by the direction of the net force acting on it.Acceleration is the rate at which the speed and direction of a moving object change over time. Acceleration is defined as the rate at which something moves faster or slower. Because the direction of motion on a circle changes all the time, even when the speed remains constant.Acceleration is defined as the rate at which velocity changes over time. It is also known as an increase in velocity per second. The SI unit of acceleration is the meter per second squared, abbreviated as ms2.Therefore,
Acceleration = 40/5 = 8
To learn more about acceleration refer to:
brainly.com/question/460763
#SPJ4
a satellite moves in a circular earth orbit that has a radius of 8.75 x 106 m. a model airplane is flying on a 20.3-m guideline in a horizontal circle. the guideline is nearly parallel to the ground. find the speed of the plane such that the plane and the satellite have the same centripetal acceleration.
The speed of the plane is 32.519 m/s
Given radius of satellite orbit is [tex]r_{1} = 8.75[/tex] × [tex]10^{6} m[/tex]
Also, Orbital velocity is given by
[tex]v = \sqrt{\frac{GM}{r} }[/tex]
where M is the mass of the earth which is equal to [tex]5.98[/tex] × [tex]10^{24}[/tex] kg
G = [tex]6.67[/tex] × [tex]10^{-11}[/tex]
[tex]v = \sqrt{\frac{(6.67 * 10^{-11} )(5.98*10^{24}) }{8.75 * 10^{6} } }[/tex]
[tex]v=21.35[/tex] × [tex]10^{3}[/tex] m/s
Centripetal acceleration is given as
[tex]a_{c} = \frac{v^{2} }{r}[/tex]
[tex]a_{c} = \frac{(21.35 * 10^{3} )^{2} }{8.75 * 10^{6} }[/tex]
[tex]a_{c} = 52.094 m/s^{2}[/tex]
For model airplane
[tex]a_{c} = \frac{v^{2} }{r}[/tex]
[tex]52.094 = \frac{v^{2} }{20.3}[/tex]
v = 32.519 m/s
Know more about centripetal acceleration: -https://brainly.com/question/22685452
#SPJ4
The gravitational force between two objects is 36 N. What will the new gravitational force be if the distance between them is tripled (x3)? A.4 N B.9 N C.18 N D.27 N
The new gravitational force when the distance between them is tripled is 4 N.
What is the gravitation force between the objects?
The gravitation force between the objects is calculated by applying Newton's law of universal gravitation.
F = Gm₁m₂/R²
where;
G is universal gravitation constantm is the mass of the objectsR is the distance between the objectsF is the forceFrom the equation above;
F₁R₁² = F₂R₂²
F₂ = F₁R₁²/R₂²
When the distance is tripled,
R₂ = 3R₁
F₂ = F₁R₁²/(3R₁)²
F₂ = F₁R₁²/9R₁²
F₂ = F₁/9
F₂ = 36 N/9
F₂ = 4 N
Learn more about gravitation force here: https://brainly.com/question/72250
#SPJ1
The gravitational force between two object is 36 N then the new gravitational force will be 4 N. Hence, option A is correct.
What is gravity?Gravity, also referred to as gravitation, is the unchanging force of attraction that binds everything together in mechanics. Being the weakest known force in nature, it has little effect on determining the intrinsic properties of common objects.
F = Gm₁m₂/ R²
From the equation above;
F₁ × R₁² = F₂ × R₂²
F₂ = F₁R₁²/R₂²
According to the question, when the distance is tripled,
R₂ = 3R₁
F₂ = F₁ R₁²/(3R₁)²
F₂ = F₁ R₁²/ 9R₁²
F₂ = F₁ / 9
F₂ = 36 N/9
F₂ = 4 N
Hence, the new gravitational force will be 4 N.
To get more information about Gravity :
https://brainly.com/question/9722860
#SPJ1