guys can you help me to fill in the missing blanks

Answer:

A and C

Explanation:

I chose these answers because a longer range of time would give a better representation of the climate.

Hope this helps! Please let me know if you need more help or think my answer is incorrect. Brainliest would be MUCH appreciated. Have a wonderful day!

Answer:

a solution with high amount of hydrogen ions is called an acidic solution

Answer:

The answer is Ka1

▬▬▬▬▬▬▬▬

When it comes to dissociation, Ka1 is fairly the most even-out level, classifying it as a Weak Acid.

They must be fully separable into ions. If that's the case, you are dealing with a Strong acid.

If this is not the case, that would make the acid Weak.

▬▬▬▬▬▬▬▬

In conclusion, I hope this helps you and I hope you have a great day!

Answer:

It is negative because the enthalpy of the products is greater than the enthalpy of the reactants.

Considering the Dalton's partial pressure, the partial pressure of CO₂ is 2.465 atm and the partial pressure of H₂O is 0.035 atm.

The pressure exerted by a particular gas in a mixture is known as its partial pressure.

So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:

[tex]P_{T} =P_{1} +P_{2} +...+P_{n}[/tex]

where n is the amount of gases in the mixture.

Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A} =x_{A} P_{T}[/tex]

In this case, you know:

Then:

Replacing in the Dalton's law:

[tex]P_{CO_{2} } =x_{CO_{2}} P_{T}[/tex]

[tex]P_{CO_{2} } =[/tex] 0.986× 2.50 atm

[tex]P_{CO_{2} } =[/tex] 2.465 atm

[tex]P_{H_{2}O } =x_{H_{2}O} P_{T}[/tex]

[tex]P_{H_{2}O } =[/tex] 0.014× 2.50 atm

[tex]P_{H_{2}O } =[/tex] 0.035 atm

Finally, the partial pressure of CO₂ is 2.465 atm and the partial pressure of H₂O is 0.035 atm.

Learn more about Dalton's partial pressure:

brainly.com/question/25181467

brainly.com/question/14119417

The absorbance of a solution that has a concentration of 1.8 is 152.75.

The absorbance of a substance can be calculated using Beer's law equation as follows:

A = εmCl

Where;

According to this question, the following information are given:

A = 42.43 × 1.8 × 2

A = 152.75

Therefore, the absorbance of a solution that has a concentration of 1.8 is 152.75.

Learn more about absorbance at: https://brainly.com/question/6838193

Answer: test two

Explanation: it sits in between both

Reactions like this one absorb energy because the reactants have less potential energy than the products.

This is the type of reaction in which the reactants absorb heat energy from the surroundings to form products.

This brings about a decrease in the temperature as a result of the reactants having less potential energy than the products thereby making option B the most appropriate choice.

Read more about Endothermic reaction here https://brainly.com/question/6506846

Answer:

1.50 moles

Balanced equation:  2Fe + 3Cl₂ --> 2FeCl₃

find moles of iron:

moles = mass/Mr

moles = 55.8/56

moles = 0.9964 moles

use molar ratio:

2Fe : 3Cl₂

2 : 3

moles of Cl₂ = (0.9964/2)*3 = 1.50 moles

Answer:

2NaBr + Ca(OH)2 ––> CaBr2 + 2NaOH

Answer:

208.8018 g/Mol you conver the answer by weight and moles

Answer:

sulphuric acid and nitric acid

Explanation:

The acids that should be stored in plastic containers rather than in glass ones are hydrofluoric acid, phosphoric acid, sulfuric acid, etc.

Acids are those solutions that are sour in taste and have lower pH to 7.

Hydrofluoric acid is highly corrosive, made up of hydrogen and fluorine.

Phosphoric acid is an important oxygen of phosphorus.

Thus, the acids that should be stored in plastic containers rather than in glass ones are hydrofluoric acid, phosphoric acid, sulfuric acid, etc.

Learn more about acids

https://brainly.com/question/14072179

#SPJ4

If an aqueous solution turns litmus red, the pH of the solution could be the range of 1 - 6.

An acid is a substance that is capable of producing only hydrogen ions (H+) when dissolved in water.

An acid posseses other unique characteristics and are as follows:

The pH range of an acidic substance is between 1-6.

Therefore, if an aqueous solution turns litmus red, the pH of the solution could be the range of 1 - 6.

Learn more about acids at: https://brainly.com/question/1515003

The thermochemical equation for the combustion of butane is:

C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g)   ΔH = -2877.5 kJ

It informs us of the entalphy of the reaction and it includes the states of aggregation.

A thermochemical equation is a balanced stoichiometric chemical equation that includes the enthalpy change, ΔH.

C₄H₁₀ + 6.5 O₂ ⇒ 4 CO₂ + 5 H₂O

To the previous equation, we will add the enthalpy change and the states of agregation.

C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g)   ΔH = -2877.5 kJ

The thermochemical equation for the combustion of butane is:

C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g)   ΔH = -2877.5 kJ

It informs us of the entalphy of the reaction and it includes the states of aggregation.

Learn more about thermochemical equations here: https://brainly.com/question/16097779

Ca is the correct answer. Maybe

Answer: By reacting with the hydrogen ions.

Explanation:

Answer:

joules per gram per degree (J/goC) or calories per gram per degree (cal/goC).

Explanation:

Answer:

Joules, Kelvin, or calories

Explanation:

Answer:An accompanying WMO report on greenhouse gas concentrations shows that 2015-2019 has seen a continued increase in carbon dioxide (CO2) levels and other key greenhouse gases in the atmosphere to new records, with CO2 growth rates nearly 20% higher than the previous five years.

Explanation:That's because the annual growth rate of atmospheric carbon dioxide has roughly tripled, from 0.6 ppm per year in the early 1960s to an average 2.1 ppm during the past 10 years. At Mauna Loa, carbon dioxide concentrations in 2015 jumped by 3.05 ppm

Considering the definition of chemical equation, the equilibrium system described by this equation has 4 reactant molecules and 2 product gas molecules.

A chemical equation is a symbolic description used to describe the identities and relative quantities of the reactants and products involved in a chemical reaction.

The information contained in the chemical equation allows us to determine the substances that are transformed or modified in a reaction, called reactants or reagents, and the new substances that originate in a chemical reaction, called products.

The chemical equation must comply with the Law of conservation of matter. That is, the equation must indicate that the number of atoms of the reactants and products is equal on both sides of the reaction and that the charges are also equal.

In this case you know:

N₂ + 3 H₂ ⇄ 2 NH₃

You can observe that the number of H₂ is 3, while the number of N₂ is 1.

The number of molecules on the reactant side is the sum of hydrogen and nitrogen molecules. Then, the total number of reactant molecule is 4.

The number of product molecules are only the number of NH₃. Then, the number of product molecules are 2.

Finally, the equilibrium system described by this equation has 4 reactant molecules and 2 product gas molecules.

Learn more about chemical equation:

https://brainly.com/question/11427379

brainly.com/question/20780772

brainly.com/question/13454144

brainly.com/question/19998775

brainly.com/question/6976143

Answer:

4 and then 2

Explanation:

The Coriolis effect is a natural phenomenon in which objects appear to be deflected as they travel around and above the Earth. The Earth is always rotating, or spinning, from west to east. It completes a full rotation every 24 hours. The Coriolis effect is caused by this rotation.

Gas law gives the relation between the volume, moles, pressure, and temperature of the gas. The air pressure at the top of the mountain is 0.945 atm.

Gas law gives the direct relationship between the pressure and the volume of the gas with that of the temperature of the gas.

Given,

Initial pressure = 1.0 atm

Initial volume = 0.985 L

Initial temperature = 298.15 K

Final pressure = ?

Final volume = 1.030 L

Final temperature = 295.15 K

The final pressure at the mountain top is calculated as:

[tex]\begin{aligned} \rm \dfrac{P_{1}V_{1}}{T_{1}} &= \rm \dfrac{P_{2}V_{2}}{T_{2}}\\\\\dfrac{1 \;\rm atm \times 0.985 \;\rm L}{ 298.15 \;\rm K} &= \;\rm \dfrac{P_{2} \times 1.030 \;\rm L}{295.15\;\rm K}\\\\&= 0.945 \;\rm atm\end{aligned}[/tex]

Therefore, the pressure on the top of the mountain is 0.945 atm.

Learn more about combined gas law here:

https://brainly.com/question/3050574  

For a comparison of the nucleus 5626fe, the density of the nucleus 112 48cd is mathematically given as the same.

n(Cd) / n(Fe)=1

Generally, the equation for the density  is mathematically given as

d=\frac{A}{4/3}\piR^3

Therefore

n(Cd) / n(Fe) = [A (Cd) / (A Fe) ] * [ R (Fe) / R (Cd)]^3

n(Cd) / n(Fe)= (112 / 56 ) * (1/1.26)3

n(Cd) / n(Fe)=1

In conclusion, The ratio of n(Cd) = n(Fe) is 1, hence same

Read more about density

https://brainly.com/question/14010194

Compared to the nucleus ⁵⁶₂₆Fe, the density of the nucleus ¹¹²₄₈Cd is same.

Density of any nucleus will be calculated by using the below equation as:

ρ = m/V, where

m = mass of the atom

V = volume = 4/3πR³

For the given question calculation will be proceed as:

n(Cd) / n(Fe) = [m(Cd)/m(Fe)].[R(Fe)/R(Cd)]³

From the given formulas of iron and cadmuim we put values on the above equation then we get,

n(Cd) / n(Fe) = (112 / 56 ) × (1/1.26)3

n(Cd) / n(Fe) = 1

Hence the density of nucleus ¹¹²₄₈Cd is same as of nucleus ⁵⁶₂₆Fe nucleus.

To know more about nucleus density, visit the below link:
https://brainly.com/question/5722114

#SPJ4

Answer:

Amphiprotic

Explanation:

Answer:

alpha particles

Explanation:

alpha particles the least penetrating but potentially most damaging and gamma rays the most penetrating. A beta particle, also called beta ray or beta radiation, is a high-energy, high-speed electron or positron emitted by the radioactive decay of an atomic nucleus during the process of beta decay.

sana po makatulong

#keeponlearning

#Godbless

Answer:

Melamine

Explanation:

Answer:

D

Explanation:

12g of carbon produces....... 1 mole of methane

72g of carbon will produce..1÷12 × 72 = 6moles

Mass is the weight of the compound or the molecule in a sample that is given in grams. The mass of sucrose in the sample is 171 gms.

The mass of the compound is the product of the molar mass of the compound and the number of moles of the compound in a sample.

Given,

The molar mass (m.w.t) of sucrose = 342.3 g/mol

Number of moles (n) of sucrose = 0.500 moles

The mass of sucrose is calculated as:

[tex]\begin{aligned} \rm mass &= \rm molar\; mass \times moles \\\\&= 342.3 \times 0.500\\\\&= 171.15 \;\rm gm\end{aligned}[/tex]

Therefore. the mass of sucrose in the sample is option A. 171 gms.

Learn more about mass here:

https://brainly.com/question/4058235

Answer:

7L

Explanation:

Divide 101 by 10.1(kPa) and you get 10.

10 x .7 = 7

The concept Boyle's law is used here to determine the new volume of gas . Boyle’s law was put forward by the Anglo-Irish chemist Robert Boyle in the year 1662. Here the new volume of the gas is 0.07 L.

A gas law known as Boyle's law asserts that a gas's pressure is inversely proportional to its volume when it is held at a fixed temperature and of a given mass. To put it another way, as long as the temperature and volume of the gas remain constant, the pressure and volume of the gas are inversely proportional to one another.

For a gas, the relationship between volume and pressure (at constant mass and temperature) can be expressed mathematically as follows.

P = k*(1/V) ⇒ PV = k

For two different gases, the equation is:

P₁V₁ = P₂V₂

V₂ = P₁V₁ / P₂

10.1 × 0.7 / 101 = 0.07 L

To know more about Boyle's law, visit;

brainly.com/question/30367067

#SPJ2