Answer:
The one on the top,'' As the water cool, it is returned to the boiler where it is heated,''
Explanation:
Which air is driest? Air Temp 30F Dew-point 29F, Air Temp 77F Dew-point 19F, Air Temp 66F Dew-point 60F, or Air Temp 50F Dew-point 36F
Answer:
Air Temp 77F Dew-point 19F
Explanation:
Quiz
The dew point can be described as the temperature required by the air to be cooled. The driest air will have a higher dew point, therefore, at an air temperature of 66°F and a dew point of 60°F. Therefore, option (C) is correct.
What is dew point?The dew point can be defined as the temperature at which air should be cooled to become saturated with water vapor assuming constant air pressure and water content.
Moisture capacity will decrease below the dew point. Airborne water vapor will condense to form liquid water or dew. Dew develops on the surface and occurs through contact with a cooler surface.
The dew point is called the frost point when the temperature is below the freezing point because frost is produced by deposition rather than a condensation of water.
The humidity also impacts the dew point. The dew point increases when there is higher moisture in the atmosphere. Therefore, the higher dew point refers to less humid air or drier.
To learn more about dew point, here:
brainly.com/question/15313810
#SPJ2
Can someone tell me about kinetic, potential, and gravitational energy?
Answer:
the internet can teach you alot about all 3 things
Explanation:
Answer:
if you go on YT and search kinetic, potential, and gravitational energy their will be a bill nye vid that is very informational on the topic at hand!!!
Explanation:
hope this helps!!
The half-life of carbon-14 is about ____________ years.
Fill in the blank.
Answer:
5730 years
Explanation: for more on radiocarbon dating.) and hence explain why the amount of carbon-14 in the sample decays by half over any period of 5730 years.
The three types of symbiosis are ___ and ___
Answer:
mutualism,commensalism and parasitism
Answer:
mutualism, commensalism, and parasitism
8
Calcium carbonate (limestone) decomposes when heated.
Caco, + CaO + CO2
b) Calculate the volume of carbon dioxide produced if 10 grames were decomposed.
Explanation:
Equation -
CaCO₃ → CaO + CO₂
molecular masses of -
CaCO₃ = 40+12+16×3 = 100 g/mol
CaO = 40+16 = 56 g/mol
CO₂ = 12+16×2 = 44 g/mol
Now,
If 100 g of CaCO₃ is decomposed then it produces 56 g of CaO and 44g of CO₂
Then,
If 1 g of CaCO₃ is decomposed then it produces 56/100g of CaO and 44/100g of CO₂
Now,
Here in question, 10g of CaCO₃ is decomposed
It means, It produces
56/100 × 10 = 56/10 = 5.6 g of CaO and
44/100 × 10 = 44/10 = 4.4 g of CO₂
Now,
we get that 10 g of CaCO₃ on burning produces 4.4 g of CO₂
we need to calculate volume of 4.4 g of CO₂
mole = mass/Gram molecular massThen,
mole = 4.4/44 = 0.1
Now,
volume = mole × 22.4 (in Litres)
= 0.1 × 22.4 = 2.24 L
Hence,
2.24 L of CO₂ will be produced when 10g of CaCO₃ decomposed.
first to answer correctly gets brainleist! (you dont needa hear that vid thingy tahts just for ppl who cant read or need orial commidations or wtv lol)
Answer:
The seasons are a result of the tilt of the earth
Help please! I’ll mark brainliest to who ever answers this first!!
Answer:
paleontologists is the answer to scientist who studies fossil
Use the equation below to solve the problem that follows.
2H2 (g) + O2 (g) → 2H2O (g)
When David reacts 13.8 grams of hydrogen gas with excess oxygen, 87.0 grams of water are formed. Calculate his percent yield of water.
Im very loss with this question
Percent yield of water : 70%
Further explanationReaction
2H₂ (g) + O₂ (g) → 2H₂O (g)
mol H₂(MW= 2 g/mol) :
[tex]\tt \dfrac{13.8~g}{2~g/mol}=6.9~mol[/tex]
mol H₂O = mol H₂ = 6.9
mass H₂O(theoretical) :
[tex]\tt 6.9\times 18~g/mol=124.2~g[/tex]
[tex]\tt \%yield=\dfrac{actual}{theoretical}\times 100\%\\\\\%yield=\dfrac{87}{124.2}\times 100\%=70\%[/tex]
Which of the following happens to the particles when the temperature of liquid water drops?
kinetic energy decreases
kinetic energy increases and then decreases
kinetic energy increases
kinetic energy stays constant
Answer:
The Kinetic energy decreases
Explanation:
because the speed of the molecules slows down.
I WILL GIVE BRAINLIEST TO YOU IF YOU ANSWER THIS (I KNOW THE ANSWER, SO IF YOU SOLVED WRONG, I WONT GIVE BRAINLIEST) SO YOU BETTER GIVE CORRECT ANSWER OR IM NOT GOING TO GIVE BRAINLIEST
Answer:
Corona Virus outbreak
Which of these describes a challenge that the engineer of a high-altitude
airplane would need to consider?
A. More fuel is used at higher altitudes.
B. The airplane may succumb to the power of gravity as lift
decreases at higher altitudes.
C. The airplane may need a heat shield for protection from sonic
booms.
O D. The airplane will create more drag at higher altitudes than lower
altitudes.
Answer:
I think its (B)
Explanation:
as when the air thins out at higher elevations, your lift decreases so at some point, the plane cant produce enough lift to overcome gravity.
How many grams are in a 3.1E21 atom sample of vanadium
Jeremiah pushed Anthony with a net force of 12 N. Anthony accelerated across the hall at 0.2 m/s2. What was Anthony’s mass?
Answer:
6
Explanation:
Work Shown:
Force = Mass*Acceleration
F = ma
12 = m*0.2
12/0.2 = m
60 = m
m = 60 kilograms
Why do electrons falling into different orbits give off characteristics wavelengths?
Explanation:
Because the difference in energy between orbits is different in different types of atoms, moving electrons between different orbits requires photons carrying different amounts of energy (different wavelengths).
please someone answer and help :)
Question 2
1 pts
Which of the following bonding types requires a TRANSFER of valence
electrons between two or more atoms?
Covalent
o lonic
Hydrogen
O Metallic
Answer:
I want to say its Lonic Bonding.
Explanation:
Ionic bonding is the complete transfer of valence electron(s) between atoms.
How does a longshore current change the beach
Answer:
As this sheet of water moves on and off the beach, it can “capture” and transport beach sediment back out to sea. This process, known as “longshore drift,” can cause significant beach erosion.
Select the correct answer
Giving brainliest
Answer:
I'm gonna say A and B
Explanation:
Not sure though
Hope I helped :)
why do the Noble gases have the highest ionization energies across a period?
Answer:
ionization energy decreases from top to bottom in groups, and increases from left to right across a period. So technically, the noble games have the largest ionization energy.
Explanation:
What is an atomic nucleus
Answer:
The atomic nucleus is the small, dense region consisting of protons and net at the center of an atom.
Explanation:
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom, discovered in 1911 by Ernest Rutherford based on the 1909 Geiger–Marsden gold foil experiment. ... Protons and neutrons are bound together to form a nucleus by the nuclear force.
Answer:
The atomic nucleus is the small , dense region consisting of protons and neutrons at the center of an atom .
What do radio waves and microwaves have in common?
Both are at the side of the spectrum that has the lowest frequency.
Both are found next to visible light on the electromagnetic spectrum.
Both are at the side of the spectrum that has the highest radiant energy.
Both are at the side of the spectrum that has the shortest wavelengths.
Answer:
Both are at the side of the spectrum that has the lowest frequency.
Explanation:
i took the test
Answer:
a
Explanation:
What is the correct name and HELPPP!!
What is the name and formula of an ionic compound containing the element with the
atomic number of 5 bonded to Carbonate? *
Boron Carbonide; B2(CO3)3
Boron Carbonate; B,CO,
Boron Carbide; B,CO,
Boron Carbonate; B2(CO3)3
Answer:
Boron Carbonate; B₂(CO₃)₃
Explanation:
For names, carbonide does not exist; that rules out the first option. Carbide refers to just a carbon atom, not carbon and oxygen as in the polyatomic ion carbonate. That rids us of the third option. We are left with boron carbonate with the formula BCO or boron carbonate with the formula B₂(CO₃)₃.
Recall the carbonate polyatomic ion's formula: CO₃²⁻
Thus BCO cannot be the formula.
Option 4 is your answer, Boron Carbonate; B₂(CO₃)₃.
To further check your answer, observe the oxidation states of boron and the polyatomic ion carbonate. Boron can exist in oxidation states of either 2+ or 3+, and carbonate is only 2-; in this formula, boron will exhibit a 3+ state to balance out with carbonate.
2x3+ = 6+; 3x2- = 6-
6+ + 6- = 0; balanced
You can see protons yes or no
No. Not with the naked eye
Carbon dioxide is formed by the given formula.
C(s)+O2(g)→CO2(g)
Carbon dioxide is
A
a compound of two elements, carbon and oxygen.
B
a mixture of two compounds, carbon and oxygen.
C
a compound of two atoms, carbon and oxygen.
D
an element of two atoms, carbon and oxygen.
Answer:
A
Explanation:
Someone answer these please! It’s multiple choice
Answer: Number 1 is titanium.
The one where you calculate a tin block is 13.0cm.
3. Is A) Same Density And Same Chemical Properties.
4. Is also A. Ne
Explanation:
Which of the following are electromagnetic waves? *
Water waves
Sound waves
Radio waves
Seismic waves
If the temperature of a substance increases will the particles of that substance be moving faster or slower or at the same speed as they were before the temperature changed
Answer:
If the temperature increases, temperature reflects the speed of the molecules, so if the molecules are at a higher temperature, they are faster and they start to break bonds and new things react.
Explanation:
A massless length of twine can withstand a maximum tension of 490 N. The twine is used to spin a 28-kg ball in horizontal circular motion of radius 1.8 m. The ball is spun faster and faster until the twine breaks. What was the maximum speed of the ball?
7.2 m/s
3.2 m/s
5.6 m/s
11 m/s
Answer:
5.6 m/s
Explanation:
Which of the following elements is a metalloid? A. phosphorus B. cobalt C. silicon D. magnesium
Answer: silicon
Explanation:it just is
Respuesta
es la C. silicio
Explanation:
No existe una definición estandarizada de elemento metaloide ni un consenso completo sobre los elementos que son metaloides.
En la clasificación de metaloides se suelen incluir a:
Boro (B)
Silicio (Si)
Germanio (Ge)
Arsénico (As)
Antimonio (Sb)
Telurio (Te)
Who knows the answer to this please help