At the end of the code, max contains the value of the larger of x and y.
The correct fragment of code that assigns the larger of x and y to another integer variable max is:int max;
if (x > y) {
max = x;
} else {
max = y;
}
In this code fragment, we first declare the integer variable max without assigning it a value. We then use an if statement to compare x and y. If x is greater than y, we assign x to max, otherwise, we assign y to max. At the end of the code, max contains the value of the larger of x and y.
To learn more about integer variable visit:
https://brainly.com/question/27855584
#SPJ11
Which of the following is false (a) A chi-square distribution with k degrees of freedom is more right-skewed than a chi-square distribution with k + 1 degrees of freedom. (b) A chi-square distribution never takes negative vales (e) The degrees of freedom for a chisquare test are deter- (d) P(X'>10) İs greater when clf k + 1 than whet te) The area under a chi-square density curve is alk mined by the sample size df alwrv equal to
The false statement is (a) A chi-square distribution with k degrees of freedom is more right-skewed than a chi-square distribution with k + 1 degrees of freedom.
In fact, as the degrees of freedom increase, the chi-square distribution becomes more symmetric and approaches a normal distribution.
The other statements are true: (b) A chi-square distribution never takes negative values, (c) The degrees of freedom for a chi-square test are determined by the number of categories being compared minus one, (d) P(X'>10) is greater when the degrees of freedom are k + 1 than when they are k, and (e) The area under a chi-square density curve is always equal to 1 and is determined by the sample size and degrees of freedom.
To learn more about Chi-square - brainly.com/question/14082240
#SPJ11
Helppp this is so hard!,
Answer:
303.375 or 303 3/8
Step-by-step explanation:
First, we can split the polygon into three smaller shapes: a triangle, a big rectangle, and a small rectangle. We will call them A, B, and C.
A:
Length: 28.25 - (3 + 13) = 28.25 - 16 = 12.25 (12 1/4)
Height: 10 + 9 = 19
Area: (12.25 * 19) / 2 = 232.75 / 2 = 116.375 ft
B:
Length: 3 + 13 = 16
Width: 10
Area: 16 * 10 = 160 ft
C:
Length: 3
Width: 9
Area: 3 * 9 = 27 ft
Now we have to add all three digits:
116.375 + 160 + 27 = 303.375 or 303 3/8
-------------------------------------------------------------------------------------------------------------
Hope this helps :)
Sure, I can help with that. The problem is asking for the area of a polygon composed of two rectangles and a right triangle.
The area of a rectangle is given by the formula length * width, and the area of a right triangle is given by the formula 1/2 * base * height.
Let’s calculate the areas:
For the first rectangle with dimensions 9ft by 13ft, the area is 9 * 13 = 117 square feet.
For the second rectangle with dimensions 10ft by 8ft, the area is 10 * 8 = 80 square feet.
For the right triangle with dimensions 28ft by 4ft, the area is 1/2 * 28 * 4 = 56 square feet.
Adding these areas together gives the total area of the polygon:
117 + 80 + 56 = 253 square feet
So, the area of the polygon is 253 square feet.
what is the solution set for the inequality 5-3k>35
Answer:
k<-10
Step-by-step explanation:
-3k+5>35
-3k+5-5>35-5
simplifica la expresión
k<-10
Problem 1. Let (X,d) be a metric space. For any x ∈ X, show that x ∈ iso(X) (that is, x is an isolated point of X) if and only if {x} is open
in (X, d). (In (Y,d), a metric space, y is an isolated point of S if there exists an open ball around y which contains no other points of S.)
To show that x ∈ iso(X) if and only if {x} is open in (X, d)
We need to prove both directions: (1) if x ∈ iso(X), then {x} is open in (X, d) and (2) if {x} is open in (X, d), then x ∈ iso(X).
(1) If x ∈ iso(X), then x is an isolated point of X. By definition, this means there exists an open ball B(x, r) centered at x with radius r > 0 such that B(x, r) ∩ X = {x}. Now, consider the set {x}. To show that {x} is open in (X, d), we need to show that for each point x in {x}, there exists an open ball centered at x that is entirely contained in {x}. Since B(x, r) ∩ X = {x}, it follows that B(x, r) ⊆ {x}. Thus, {x} is open in (X, d).
(2) If {x} is open in (X, d), then for each point x in {x}, there exists an open ball B(x, r) centered at x with radius r > 0 such that B(x, r) ⊆ {x}. In other words, B(x, r) ∩ X = {x}. This means that no other points of X are in B(x, r), which is the definition of an isolated point. Therefore, x ∈ iso(X).
In conclusion, x ∈ iso(X) if and only if {x} is open in (X, d).
Learn more about Sets: https://brainly.com/question/8053622
#SPJ11
Reverse logistics involves: a. triage b. designing a supply management system from the customer's perspective c. understanding of e-procurement systems d. understanding of transportation options
Reverse logistics involves designing a customer-focused supply management system and understanding transportation options, but it does not necessarily require knowledge of e-procurement systems or triage.
Reverse logistics is the process of managing the flow of products, materials, and information from the end-user back to the point of origin. It involves activities such as returns, refurbishment, recycling, and disposal of products.
The options given are:
a. triage - This refers to the process of determining the priority of patients' treatments based on the severity of their condition. While triage is an important concept in healthcare, it is not directly related to reverse logistics.
b. designing a supply management system from the customer's perspective - This is a key aspect of reverse logistics. A successful reverse logistics system requires a customer-focused approach to ensure that products can be easily returned and that customers have a positive experience with the returns process.
c. understanding of e-procurement systems - While e-procurement systems can be helpful in managing the reverse logistics process, it is not a necessary component of reverse logistics. E-procurement systems are primarily used for purchasing and procurement activities.
d. understanding of transportation options - Transportation is a critical component of reverse logistics, as it is necessary to move returned products from the point of origin back to the manufacturer or retailer. Understanding transportation options and selecting the most cost-effective and efficient method of transportation is essential to managing the reverse logistics process.
In summary, reverse logistics involves designing a customer-focused supply management system and understanding transportation options, but it does not necessarily require knowledge of e-procurement systems or triage.
To learn more about management visit:
https://brainly.com/question/30222076
#SPJ11
A soccer dome shaped like a hemisphere has a volume of 450,000 m^3. What is the area of its field? Use 3. 14 for pi
As per the given values, the area of the hemisphere is 45065.41 m³
Volume = 450000 m³
Calculating the volume of the hemisphere -
Volume = 2/3 πr³
Substituting the values -
450,000 =2/3 x 3.14 x r³
Solving for r³
r³ = 450000 x 3/(2 x 3.14)
r³ = 214968.1
r = √214968.1
r = 59.9
Calculating the area of the hemisphere -
Area = 4πr²
Substituting the values -
Area = 4 x 3.14 x (59.9)²
= 12.56 x (59.9)²
= 45065.41
Read more about area on:
brainly.com/question/24487155
#SPJ4
Help please and thank you!
Answer:
height = 9 in
Step-by-step explanation:
The formula for volume (V) of a rectangular prism is V = lwh, where l is the length, w is the width, and h is the height
In the question, we're given the volume and in the diagram, we're given the length (8.5 in.) and the width (2 in.). We can solve for l by plugging in our volume, length, and width into the formula and solving for x (the length):
[tex]153=(8.5)(2)x\\153=17x\\9=x[/tex]
if a newspaper reports that a recent opinion poll shows candidate a with 52% of the vote and candidate b with 48% of the vote, with a margin of error of /- 4%, which of the following statements is true?
Based on the newspaper report, it can be concluded that Candidate A is leading with 52% of the vote while Candidate B has 48% of the vote. However, it is important to note that the margin of error is +/- 4%. This means that there is a chance that the actual percentage of votes for each candidate could be 4% higher or lower than what the poll suggests.
For example, Candidate A's actual percentage of votes could be anywhere between 56% (52% + 4%) and 48% (52% - 4%), while Candidate B's actual percentage of votes could be anywhere between 52% (48% + 4%) and 44% (48% - 4%).
It is also important to note that opinion polls are not always accurate predictors of election results. They are simply a snapshot of public opinion at a particular moment in time and can be influenced by various factors such as the wording of the questions, the sample size, and the demographic makeup of the respondents.
In summary, based on the newspaper report, Candidate A has a slight lead over Candidate B with 52% of the vote, but there is a margin of error of +/- 4% which means that the actual percentage of votes for each candidate could be different. It is important to keep in mind that opinion polls are not always accurate predictors of election results.
Know about vote : https://brainly.com/question/946526
#SPJ11
Which statement best describes the expression fraction 1 over 2 x (14 − 6) x 6 + 4? (2 points)
Find half the product of 6 and 4, then subtract the difference between 14 and 6.
Find half the difference of 14 and 6, multiply by 6, then add 4.
Find the product of 14 and 6, add the product of 6 and 4, then divide by 2.
Find the product of 6 and 4, subtract the difference between 14 and 6, then multiply by fraction 1 over 2
The correct statement is "Find half the difference of 14 and 6, multiply by 6, then add 4".
What is the solution of the expression?The solution of the fraction expression is calculated as follows;
1/[2 x (14 - 6) x 6 + 4]
To solve the above expression, we will apply the rule of BODMAS as shown below;
The difference of 14 and 6 = 14 - 6 = 8
The next is to divide 8 by 2
= 8/2
= 4
The next step is to multily the result by 6
= 4 x 6
= 24
The final step is to add 4 to it;
= 24 + 4
= 28
Learn more about expressions here: https://brainly.com/question/723406
#SPJ1
suppose that the distribution for total amounts spent by students vacationing for a week in florida is normally distributed with a mean of 650 and a standard deviation of 120 . suppose you take a simple random sample (srs) of 20 students from this distribution. what is the probability that a srs of 20 students will spend an average of between 600 and 700 dollars? round to five decimal places.
The probability that a srs of 20 students will spend an average of between 600 and 700 dollars is 0.92081.
We need to find the probability that a simple random sample of 20 students will spend an average of between 600 and 700 dollars.
To solve this problem, we will use the central limit theorem, which states that the sampling distribution of the sample means will be approximately normally distributed with a mean of μ and a standard deviation of σ/√(n), where n is the sample size.
Thus, the mean of the sampling distribution is μ = 650 and the standard deviation is σ/sqrt(n) = 120/√(20) = 26.83.
We need to find the probability that the sample mean falls between 600 and 700 dollars. Let x be the sample mean. Then:
Z1 = (600 - μ) / (σ / √(n)) = (600 - 650) / (120 / √t(20)) = -1.77
Z2 = (700 - μ) / (σ / √(n)) = (700 - 650) / (120 / √(20)) = 1.77
Using a standard normal distribution table or calculator, we can find the area under the standard normal distribution curve between these two Z-scores as:
P(-1.77 < Z < 1.77) = 0.9208
Therefore, the probability that a simple random sample of 20 students will spend an average of between 600 and 700 dollars is 0.9208, or approximately 0.92081 when rounded to five decimal places.
Learn more about probability here:
brainly.com/question/14228383
#SPJ11
a wire whose length is given as x inches is bent into a square. express the length of a side of the square in terms of x.
Therefore, the length of a side of the square is x/4 inches by the equation.
In this context, we have a wire that we need to bend into a square. A square has four equal sides, so if we let s be the length of one side of the square, then the total length of the wire must be 4s.
The equation 4s = x represents this relationship, where x is the total length of the wire.
To solve for s, we can isolate s on one side of the equation by dividing both sides by 4. This gives us:
4s / 4 = x / 4
Simplifying, we get:
s = x / 4
To know more about equation,
https://brainly.com/question/28243079
#SPJ11
For each of the following research scenarios, decide whether the design uses a related sample. If the design uses a a sample, identify whether it uses matched subjects or repeated measures. Suzanne Thomas was interested in how alcoholics with social phobia compared to alcoholics without social phobia. She matched alcoholics without social phobia to those with social phobia on several variables, including age and gender. She then queried participants in each group about the seventy of their alcohol dependence. The design described Lorrin Koran has studied whether antidepressants are effective for treating kleptomania. Suppose that people with kleptomania typically score 72 on the Barratt Impulsiveness Scale. You want to see whether kleptomaniacs who are taking antidepressants score lower on the impulsiveness scale than the population average. The design described.........
The design described in the first scenario uses a related sample with matched subjects.
In the first scenario, Suzanne Thomas is interested in comparing alcoholics with social phobia to alcoholics without social phobia. She matches participants from both groups on several variables, such as age and gender, in order to create comparable groups. This indicates the use of matched subjects design, where participants in one group are matched with participants in another group based on certain criteria to create comparable groups for comparison. Suzanne Thomas then collects data on the severity of alcohol dependence from each group. Therefore, the design described in the first scenario uses a related sample with matched subjects.
In the second scenario, the design described does not involve the use of a related sample. It is mentioned that the researcher wants to compare kleptomaniacs who are taking antidepressants to the population average, without matching or pairing participants.
Therefore, the design in the second scenario does not involve the use of a related sample.
To learn more about sample here:
brainly.com/question/13287171#
#SPJ11
Consider the following set of equations:
Equation R: −3y = −3x − 9
Equation S: y = x + 3
Which of the following best describes the solution to the given set of equations?
a
No solution
b
One solution
c
Infinite solutions
d
Two solutions
The solution to the given set of equations is Infinite solutions.
We have the equation
R: -3y = -3x -9
S: y = x + 3
Now, solving the equation R and S as
-3y = -3x - 9
3y = 3x + 9
_________
0 = 0 + 0
0 = 0
Also, -3/1 = 3/(-1) = 9/(-3)
-3/1 = -3/1 = -3/1
Thus, the equation have Infinite many solutions.
Learn more about Equation here:
https://brainly.com/question/29657983
#SPJ1
What is the area of this triangle?
Enter your answer as a decimal in the box. Round only your final answer to the nearest tenth.
Answer:
48.8 square inches
Step-by-step explanation:
To find the area of the triangle, we can use the formula:
Area = 1/2 * base * height
In this case, the base of the triangle is the longer side, which is 13 inches, and the height is the shorter side, which is 7.5 inches. However, we need to make sure that the angle provided is the angle between the base and the height, and not one of the other angles of the triangle.
Assuming that the angle provided is indeed the angle between the base and the height, we can proceed with the calculation:
Area = 1/2 * 13 inches * 7.5 inches
Area = 48.75 square inches
Rounded to the nearest tenth, the area of the triangle is 48.8 square inches.
The graph shows the location of point P and point R. Point R is on the y-axis and has the same y-coordinate as point P. Point Q is graphed at ( n , ¯ 2 ) . The distance from point P to point Q is equal to the distance from point P to point R. What is the distance from point P to point Q? What is the value of n? Explain how you determined the distance from point P to point Q, and the value of n. Enter your answers and your explanations in the space provided.The graph shows the location of point P and point R. Point R is on the y-axis and has the same y-coordinate as point P. Point Q is graphed at ( n , ¯ 2 ) . The distance from point P to point Q is equal to the distance from point P to point R. What is the distance from point P to point Q? What is the value of n? Explain how you determined the distance from point P to point Q, and the value of n. Enter your answers and your explanations in the space provided.
The value of n is 5.
Given that, the Coordinate of P = (n,3)
R is on y-axis & the y-coordinate of P & R are equal.
So coordinate of R = (3,0)
Coordinate of Q = (n,-2)
Using distance formula,
Distance between P & Q =
[tex]=\sqrt{(n-n)^2+(-3-(-2)^2} \\\\=\sqrt{(3+2)^2} \\\\= \sqrt{25} = 5[/tex]
Distance between P & R =
[tex]\sqrt{(n-0)^2+(3-3)^2}[/tex]
= n
According to the question it is given that distance between P & Q is equal to the distance between P & R. So, n = 5.
Learn more about distance between points, click;
https://brainly.com/question/15958176
#SPJ1
.PLEASE HURRY
What are the zeros of the following function?
Answer:
The zeroes are x = -4 and x = 2.
The brick border is 40 cm wide. What is the area of the brick border?
The area of the brick border is: 7.678 m²
What is the area of the composite figure?Using Pythagoras theorem, we can find the diameter of the circle as:
d = √(10² - 6²)
d = √64
d = 8 m
Since the width of the brick border is 40 cm, then converting to meters gives 0.4 m.
Area of semi circle with brick border = ¹/₂(π * (8.8/2)²) = 30.411 m²
Area of semi circle without brick border = ¹/₂(π * (8/2)²) = 25.133 m²
Area of circular part of border = 30.411 m² - 25.133 m²
= 5.278 m²
Area of rectangular part of border = 6 * 0.4 = 2.4 m²
Total area of border = 5.278 m² + 2.4 m²
= 7.678 m²
Read more about Area of composite figure at: https://brainly.com/question/10254615
#SPJ1
Julia had a bag filled with gumballs. There were 3 lemon-lime, 2 watermelon, and 1 grape gumballs. What is the correct sample space for the gumballs in her bag?
Sample space = lemon-lime, watermelon, grape
Sample space = lemon-lime, lemon-lime, lemon-lime, watermelon, watermelon, grape
Sample space = 1, 2, 3
Sample space = 1, 2, 3, 4, 5, 6
Answer:
The answer to your problem is, B. Sample space = lemon-lime, lemon-lime, lemon-lime, watermelon, watermelon, grape
Step-by-step explanation:
We are given that, Julia had a bag filled with gumballs. There were 3 lemon-lime, 4 watermelon, and 6 grape gumballs.
There are 3 lemon-lime: Elements in sample space are lemon-lime, lemon-lime, lemon-lime
There are also 4 watermelon: Elements in sample space are watermelon, watermelon, watermelon, watermelon
Lastly there are 6 grape: Elements in sample space are grape, grape, grape, grape, grape, grape
Which can lead to the problem of:
3 + 4 + 6 = 13. Same as option B
Thus the answer to your problem is, B. Sample space = lemon-lime, lemon-lime, lemon-lime, watermelon, watermelon, grape
The Cp statistic is more useful than the Cpk statistic since it can better account for non-centered distributions.TrueFalse
False.
The Cp and Cpk statistics are both used to assess the capability of a process to meet specifications, but they have different purposes.
The Cp statistic is a measure of how well the process spread (variation) fits within the specification limits. It assumes that the process mean is centered on the target value. It is calculated as the ratio of the specification width to the process spread (six times the process standard deviation).
The Cpk statistic, on the other hand, takes into account both the process spread and the deviation of the process mean from the target value. It is calculated as the minimum of two values: the difference between the process mean and the closest specification limit divided by three times the process standard deviation (assuming the process is centered within the specification limits), or the Cp value adjusted for the deviation of the process mean from the target value.
Both statistics have their uses and limitations depending on the situation. If the process mean is not centered on the target value, the Cpk statistic may be more useful than the Cp statistic since it takes into account both the spread and centering of the process.
To learn more about target value visit:
https://brainly.com/question/30459226
#SPJ11
A cube of side 5 is built with black and white cubes of side 1, so that the cubes next to each other have different colors and the corner cubes are black, as shown in the figure. How many white cubes were used?
Answer: 62
Step-by-step explanation:
top row has 12
the next row has 1 more =13
and it alternates
12+13+12+13+12=62
The diameter of a circle is 21 cm. Find its area to the nearest whole number.
26 students were randomly selected from a large group of students taking a certain calculus test. The mean score for the students in the sample was 83. Assume that o-8.70. Construct a 99% confidence interval for the mean score, H, of all students taking the test.
The 99% confidence interval for the mean score, μ, of all students taking the test is approximately (78.603, 87.397)
To construct a 99% confidence interval for the mean score, μ, of all students taking the calculus test, we need to follow these steps:
Step 1: Identify the sample mean, sample standard deviation, and sample size.
Sample mean (X) = 83
Sample standard deviation (σ) = 8.70
Sample size (n) = 26
Step 2: Determine the appropriate z-score for a 99% confidence interval.
For a 99% confidence interval, the z-score (z) is 2.576.
Step 3: Calculate the standard error of the mean (SEM).
[tex]SEM= \frac{σ }{\sqrt{n} } = \frac{8.70}{\sqrt{26} } = 1.706[/tex]
Step 4: Compute the margin of error (ME).
ME = z * SEM = 2.576 * 1.706 = 4.397
Step 5: Construct the 99% confidence interval.
Lower limit = X - ME = 83 - 4.397 = 78.603
Upper limit = X + ME = 83 + 4.397 = 87.397
Your answer: The 99% confidence interval for the mean score, μ, of all students taking the test is approximately (78.603, 87.397).
To know more "standard deviation" refer here:
https://brainly.com/question/23907081#
#SPJ11
26. If BD = 8x - 27 and EC-2x + 33, find BD
The length of BD is 53 units.
We are given here that BD is (8x - 27) units and EC is (2x + 33) units. BD and EC are the diagonals of a trapezoid. As we know that diagonals of a trapezoid are equal. Therefore, we will equate the given diagonals of a trapezoid.
BD = EC
Substituting the given values of BD and EC
8x - 27 = 2x + 33
combining the like terms
8x - 2x = 33 + 27
6x = 60
x = 60/6
x = 10
Now, as we have to find BD, we will substitute the value of x in the given equation for BD.
BD = 8x - 27
BD = 8(10) - 27
BD = 80 - 27
BD = 53
Therefore, BD is 53 units.
To learn more about equating two equations;
https://brainly.com/question/29275402
#SPJ4
The complete question is " If BD = 8x - 27 and EC-2x + 33, find BD with respect to the image shown."
solve for length of segment D a=4 cm b=12 cm c=6 cm 4 • ? = ? • D
The length of segment d is 8 when the value segment a is 4 cm, b is 12 cm , c is 6 cm
If two segments intersect inside or outside the circle then ab=cd
Given values of a is 4 cm, b is 12 cm , c is 6 cm and d is x
ab=cd
Plug in the values of a, b , c and d
4×12=6×d
48=6d
Divide both sides by 6
8=d
To learn more on Circles click:
https://brainly.com/question/11833983
#SPJ1
Random samples of 6 male students and 14 female students were asked how many hours a week they exercise with the following results: Males: Sample mean is 5.24 and sample standard deviation is 3.01. Females: Sample mean is 4.22 and sample standard deviation is 2.33. (a) Find a 95% confidence interval for true mean hours of exercise per week in each group. Males. ( ), ( ) Females.( ), ( )
A 95% confidence interval for the true mean hours of exercise per week is (2.08, 8.40) for males and (2.95, 5.49) for females
To find a 95% confidence interval for the true mean hours of exercise per week for each group, we will use the following formula:
[tex]Confidence interval = Sample mean± (t \frac{Sample standard deviation}{\sqrt{n} } )[/tex]
where t is the t-score based on the degrees of freedom and the desired confidence level (95%).
(a) Males:
1. Determine the t-score: For a 95% confidence interval and 6 - 1 = 5 degrees of freedom, the t-score is approximately 2.571.
2. Calculate the margin of error: [tex]2.571 (\frac{3.01}{\sqrt{6} }) = 3.16[/tex]
3. Find the confidence interval: 5.24 ± 3.16 = (2.08, 8.40)
Males: (2.08, 8.40)
(b) Females:
1. Determine the t-score: For a 95% confidence interval and 14 - 1 = 13 degrees of freedom, the t-score is approximately 2.160.
2. Calculate the margin of error: [tex]2.160 (\frac{2.33}{\sqrt{14} }) = 1.27[/tex]
3. Find the confidence interval: 4.22 ± 1.27 = (2.95, 5.49)
Females: (2.95, 5.49)
In conclusion, a 95% confidence interval for the true mean hours of exercise per week is (2.08, 8.40) for males and (2.95, 5.49) for females.
To know more about "confidence interval" refer here:
https://brainly.com/question/29680703#
#SPJ11
Question 3 (10 marks) Find an equation for the plane tangent to the surface z = x²y + xy^2 + In x+R at (1,0,R). Z=
The equation of the plane tangent to the surface z = x²y + xy² + ln x + R at (1, 0, R) is z = x + y + (R - 1).
To find the equation of the plane tangent to the surface z = x²y + xy^2 + ln x + R at the point (1, 0, R), we'll need to find the partial derivatives with respect to x and y, and then use the point-slope form of the tangent plane equation. Here are the steps:
1. Find the partial derivatives of the surface function with respect to x and y:
∂z/∂x = 2xy + y² + (1/x)
∂z/∂y = x² + 2xy
2. Evaluate the partial derivatives at the given point (1, 0, R):
∂z/∂x(1, 0) = 2(1)(0) + (0)² + (1/1) = 1
∂z/∂y(1, 0) = (1)² + 2(1)(0) = 1
3. Use the point-slope form of the tangent plane equation:
z - z₀ = a(x - x₀) + b(y - y₀)
4. Substitute the point (x₀, y₀, z₀) = (1, 0, R) and the partial derivative values a = ∂z/∂x = 1, b = ∂z/∂y = 1:
z - R = 1(x - 1) + 1(y - 0)
5. Simplify the equation:
z - R = x - 1 + y
6. Rearrange the equation to the standard form:
z = x + y + (R - 1)
The equation of the plane tangent to the surface z = x²y + xy² + ln x + R at (1, 0, R) is z = x + y + (R - 1).
Learn more about Tangent: https://brainly.com/question/19064965
#SPJ11
What was the mortality rate for those humans who were infected with the bird flu?
a 0.3
b 0.5
c 0.7
d 0.9
a) Event and are such that P(X ) 0.6 and P(Y) 0.2 and
P[(X Y ) (X Y)] 0.45 . Find P(X Y ) . Hence, determine if and are
independent.
5 marks
b) Given that and are two events with the following probabilities :
7 1 5
( ) , ( ' ) ( )
8 12 16
P A P A B and P A B
Find
i. P(B)
3 marks
ii. P(A B')
3 marks
a)
The events X and Y are not independent.
b)
(1)The value of P(B) is 1/124.
(ii) The value of P(A ∩ B') is 9/16.
We have,
a)
We have:
P(X) = 0.6
P(Y) = 0.2
P[(X Y) ∪ (X Y')] = 0.45 (using the distributive property of set operations)
We want to find P(X ∩ Y), which we can do using the formula:
P(X ∩ Y) = P(X) + P(Y) - P(X ∪ Y)
To find P(X ∪ Y), we can use the formula:
P(X ∪ Y) = P(X) + P(Y) - P(X ∩ Y)
Using the values given, we have:
P(X ∪ Y) = 0.6 + 0.2 - P(X ∩ Y) (substituting in P(X) and P(Y))
P[(X Y) ∪ (X Y')] = 0.45 (given)
We can rewrite the left-hand side as:
P[(X Y) ∪ (X Y')] = P(X Y) + P(X Y') (using the distributive property of set operations)
Since X and Y are disjoint events, we have:
P(X Y') = P(X) - P(X ∩ Y) (using the formula for the probability of the complement of an event)
Substituting these values into the expression for P[(X Y) ∪ (X Y')], we get:
P(X Y) + (P(X) - P(X ∩ Y)) = 0.45
Simplifying, we get:
P(X Y) = 0.45 + P(X ∩ Y) - P(X)
Substituting in the values of P(X) and P(Y) given, we get:
P(X Y) = 0.45 + P(X ∩ Y) - 0.6
P(X Y) = -0.15 + P(X ∩ Y)
Since probabilities cannot be negative, we know that P(X Y) ≤ P(X ∩ Y). Therefore, we can conclude that X and Y are not independent.
b)
i. We have:
P(A) = 7/8
P(B) = 1/12
P(A ∩ B) = 5/16
We want to find P(B). We can use the formula:
P(A ∪ B) = P(A) + P(B) - P(A ∩ B)
Since A and B are disjoint events, we have:
P(A ∪ B) = P(A) + P(B)
Substituting in the values given, we get:
P(A) + P(B) = 7/8 + P(B) = 1 - P(B') = 11/12
Solving for P(B), we get:
P(B) = 11/12 - 7/8 = 1/24
ii.
We want to find P(A ∩ B'). We can use the formula:
P(A ∩ B') = P(A) - P(A ∩ B)
Substituting in the values given, we get:
P(A ∩ B') = 7/8 - 5/16 = 9/16
Thus,
a)
X and Y are not independent.
b)
(i) P(B) = 1/124
(ii) P(A ∩ B') = 9/16
Learn more about probabilities here:
https://brainly.com/question/30034780
#SPJ11
When would you use a pictograph?
more than one answer
A. if the data is numerical
B. to compare change over time
C. to save space for a large set of data
D. if the data is categorical
Answer:
The answer to your problem is, D. If the data is categorical
Step-by-step explanation:
What a pictograph is:
Remember that a pictographs are less useful for comparing change over time or for presenting large sets of numerical data, as they can become cluttered and difficult to read.
Here is a little example, if you want to show how the population of a city has changed over the years, a line graph or a bar graph would be a better choice than a pictograph
Thus the answer to your problem is, D. If the data is categorical
3/10 en notación decimal
Answer: 0.3
Step-by-step explanation:
3/10 = 30/100 = 0.3
Answer:
0.3
Step-by-step explanation: