The quotient of [tex]40y^(4)-5y^(3)-30y^(2)-10y[/tex] divided by [tex]8y^(3) - y^(2) - 6y - 2[/tex]
You can use the polynomial long division method to find the product of two polynomials. Following are the steps:
Step 1: Descending in degree, write the dividend polynomial. If any terms are absent from the polynomial, replace them with coefficients of 0.Step 2: Descend the degree of the divisor polynomial as you write it. If any terms are missing from the divisor polynomial, substitute coefficients of 0 for those terms.Step 3: To calculate the first term of the quotient, divide the dividend's first term by the divisor's first term.Step 4: Multiply the divisor by the first term of the quotient to get the first term of the partial product.Step 5: Subtract the partial product from the dividend.Step 6: Bring down the next term of the dividend.Step 7: Repeat steps 3-6 until all the terms of the dividend have been used.Step 8: The final result is the quotient, plus any remainder left over after the last subtraction.To divide [tex]40y^(4)-5y^(3)-30y^(2)-10y[/tex] by 5y, we utilize long division. Divide dividend by divisor to obtain first term of the quotient:
[tex]40y^(4) / (5y) = 8y^(3)[/tex]
Multiply divisor (5y) by first term of quotient (8y^(3)) to obtain first term of partial product:
[tex](8y^(3))(5y) = 40y^(4)[/tex]
Subtract the partial product from the dividend to obtain remainder:
[tex]40y^(4) - 40y^(4) = 0[/tex]
[tex]-5y^(3) / (5y) = -y^(2)(-y^(2))(5y) = -5y^(3)-5y^(3) - (-5y^(3)) = 0[/tex]
[tex]-30y^(2) / (5y) = -6y(-6y)(5y) = -30y^(2)-30y^(2) - (-30y^(2)) = 0[/tex]
Repeat process:
[tex]-10y / (5y) = -2(-2)(5y) = -10y-10y - (-10y) = 0[/tex]
Learn more about quotient here:
https://brainly.com/question/16134410
#SPJ1
Graph the inequality in the coordinate plane. x < -7
For the given inequality x < -7 we draw a straight line at the point -7. The inequality is not strict, hence the line is dotted.
What is inequality?A mathematical statement called an inequality compares two numbers or expressions, typically by employing a symbol. Inequalities show that two quantities are not equal and that one is more than or less than the other.
Number lines can be used to visualise inequality conditions. Depending on whether the endpoint is part of the solution set or not, numbers that meet the inequality are shaded in or denoted by an open or closed circle. A number line would, for instance, show the inequality x > 2 with an open circle at 2 and shading to the right to show all values higher than 2.
In many areas of mathematics as well as in other disciplines like economics and social sciences, inequality is used.
For the given inequality x < -7 we draw a straight line at the point -7.
The inequality is not strict, hence the line is dotted.
Learn more about inequality here:
https://brainly.com/question/30231190
#SPJ1
Required information Note this is a multi-part problem. That means the parts must be worked in order (a first, then b, then c, and so on). Furthermore, if you check your answer on one part, it will count as a check for all parts of the problem. Therefore, work all parts of the problem (in order!), then check your answer. Rework all missed parts before using your next "check my answer". Let X=5 L 40' and Y = 20 L -30° The polar form of the quantity (X + Y)X* is Oy Please report your answer so the magnitude is positive and all angles are in the range of negative 180 degrees to positive 180 degrees.
The polar form of the quantity will be 100.83 L 76.47°.
Given X = 5 L 40'andY = 20 L -30°(X + Y)X* .The expression (X + Y)X* can be simplified as: X * X + Y * X* =X² + Y * X* .Now, we need to find the polar form of the quantity (X + Y)X*.That is, we need to representX² + Y * X* in polar form. By using rectangular to polar conversion, we can convert the above expression to polar form.
Using the formula:
r² = x² + y²... Equation 1
θ = tan⁻¹(y / x)... Eq 2 (Where,x = real part of the expression)
x = X² = 5² = 25... Eq 3 (y = imaginary part of the expression)
y = Y * X*... Eq 4
Therefore, Y
Y * X* = 20 L -30° * 5 L 40'20 L -30° * 5 L 40' = 100 L 10°... Eq5
y = 100 L 10°.
Substituting the values of x and y in equations 1 and 2, we get:r² = x² + y²r² = 25² + 100²r² = 10025 + 100²r = 100.83θ = tan⁻¹(y / x)θ = tan⁻¹(100 L 10° / 25)θ = tan⁻¹(4 L 10°)θ = 76.47°
To know more about polar form of an equation, refer here:
https://brainly.com/question/28976035#
#SPJ11
A 20,000 gallon swimming pool contains 5000 gallons of water when a hose is placed in the pool and begins adding water at a rate of
1250 gallons per hour.
Use the Segment tool to plot a graph representing the volume of water in the pool over time from when the hose is placed in the pool
until the pool is full
Therefore , the solution of the given problem of unitary method comes out to be for each number of t, we can plot the points corresponding to the equation V(t) = 5000 + 1250t .
What is an unitary method?To accomplish the task, one may use this generally accepted ease, preexisting variables, as well as any significant components from the original Diocesan customizable query. If so, there might be an opportunity to interact with the item once more. Otherwise, every significant factor that affects how algorithmic evidence behaves will be gone.
Here,
=> V(t) = 5000 + 1250t
where V(t) represents the amount of water in the pool at moment t (in hours)
t equals time (in hours)
The pool initially has 5000 gallons of water in it, so we add that to the 1250 t of water introduced by the hose.
We can use the time period as the x-axis (horizontal axis) and the amount of water as the y-axis to graph this equation. (vertical axis).
For instance, we can select the water volume interval from 0 to 20,000 gallons and the time interval from 0 to 16 hours (when the pool is full).
Then, for each number of t, we can plot the points corresponding to the equation V(t) = 5000 + 1250t and connect them with a line in order to get the image.
To know more about unitary method visit:
https://brainly.com/question/28276953
#SPJ1
Analyze the diagram below and complete the instructions that follow.Find m
The measure of angle A is equal to 41.11 rounded to two decimal place, using trigonometric ratio for the cosine of the angle A. The correct option is B.
What is trigonometric ratios?The trigonometric ratios is concerned with the relationship of an angle of a right-angled triangle to ratios of two side lengths.
The basic trigonometric ratios includes;
sine, cosine and tangent.
cos A = 55/73 {adjacent/hypotenuse}
A= cos⁻¹(55/73) {cross multiplication}
A = 41.1121
Therefore, the measure of angle A is equal to 41.11 rounded to two decimal place, using trigonometric ratio for the cosine of the angle A
Know more about trigonometric ratios here: https://brainly.com/question/11967894
#SPJ1
an inner city revitalization zone is a rectangle that is twice as long as it is wide. the width of the region is growing at a rate of 31 m per year at a time when the region is 450 m wide. how fast is the area changing at that point in time?
The area of the rectangle is increasing at a rate of 27,900,000 meters³ per year when the width of the region is 450 meters.
The inner-city revitalization region is a rectangle that is twice as long as it is wide. At a time when the area is 450 meters wide, the width of the region is increasing at a rate of 31 meters per year. The aim is to find out how quickly the area is changing at this point in time. The area of the rectangle is given by the formula,
Area = length × width
Given that the width of the rectangle is increasing at a rate of 31 meters per year. Let's say the width of the rectangle is w meters, and the rate of change in width is dw/dt meters per year. Then, we can say, dw/dt = 31 meters per year
Width of the rectangle is w meters
Length of the rectangle is twice the width, or 2w meters
Area of the rectangle is given by the formula, A = lw= 2w × w= 2w²
Now, we need to find dA/dt, the rate at which the area of the rectangle is changing with respect to time (t).We can find it using the formula,
dA/dt = dA/dw × dw/dt
dA/dw = 4w (differentiate 2w² with respect to w)
dw/dt = 31 meters per yeard
A/dt = dA/dw × dw/dt= 4w × 31= 124w meters² per year
From the given information, the width of the rectangle is 450 meters wide. So, the width is w = 450 meters.
dA/dt = 124w meters² per year
= 124 × 450 meters² per year
= 27,900,000 meters³ per year
Which is the increasing rate of the rectangle.
To know more about area of the rectangle: https://brainly.com/question/23027949
#SPJ11
how do you find the dimensions of the parallelogram
To find the dimensions of a parallelogram, you need to know the length of its base and the perpendicular distance from the base to the opposite side, which is also called the height or altitude of the parallelogram.
What is a parallelogram?A quadrilateral (a four-sided polygon) with two pairs of parallel sides is referred to as a parallelogram. This means that the opposite sides of the parallelogram are parallel and have the same length, while the adjacent sides are unequal in length.
The properties of a parallelogram include:
The opposing sides seem to be congruent and parallel (equal in length)
Congruent opposite angles (equal in measure)
The angle adjacent to each other are supplementary (their sum is 180 degrees)
Diagonals bisect each other (the diagonals divide each other into two equal parts)
If you have the measurements of the sides and angles of the parallelogram, you can use trigonometry and geometry to find the length of the base and the height. For example, if you have the lengths of two adjacent sides and the angle between them, you can use the sine function to find the height. The base can be found by using the formula for the area of a parallelogram, which is base times height.
To know more about trigonometry, visit:
https://brainly.com/question/29002217
#SPJ1
Data was collected on the amount of time that a random sample of 8 students spent studying for a test and the grades they earned on the test. a scatter plot and line of fit were created for the data. scatter plot titled students' data, with points plotted at 1 comma 60, 2 comma 60, 2 comma 70, 2 comma 80, 3 comma 80, 3 comma 90, 4 comma 95, and 4 comma 100, and a line of fit drawn passing through the points 0 comma 40 and 2 comma 70. find the y-intercept of the line of fit and explain its meaning in the context of the data.a. 30; for each additional hour a student studies, their grade is predicted to increase by 30% on the testb. 15; for each additional hour a student studies, their grade is predicted to increase by 15% on the test c. 70; a student who studies for 0 hours is predicted to earn 70% on the test d. 40; a student who studies for 0 hours is predicted to earn 40% on the test
Answer: The y-intercept of the line of fit can be found by looking at the point where the line crosses the y-axis. From the given information, we know that the line passes through the points (0, 40) and (2, 70). To find the equation of the line, we can use the slope-intercept form:
y = mx + b
where m is the slope and b is the y-intercept. We can find the slope of the line by using the two points:
m = (y2 - y1) / (x2 - x1)
m = (70 - 40) / (2 - 0)
m = 30
So the equation of the line is:
y = 30x + b
To find the y-intercept, we can plug in one of the points and solve for b. Let's use the point (0, 40):
40 = 30(0) + b
b = 40
Therefore, the y-intercept of the line of fit is 40. In the context of the data, this means that a student who did not study at all (0 hours) is predicted to earn a grade of 40 on the test. However, it's important to note that this prediction is based on the data collected from the sample of 8 students and the line of fit may not accurately predict the grades of all students who did not study.
Your welcome.
Can sum1 help please
You can use the desmos graphing calculator
According to the given information, Mack should make 4 necklaces and 8 wristbands to maximize his profit.
What are linear programming problems?
LPP stands for Linear Programming Problems. Linear programming is a mathematical optimization technique used to maximize or minimize a linear objective function subject to a set of linear constraints. An LPP involves identifying a set of decision variables, an objective function that depends linearly on these variables, and a set of constraints that specify linear relationships between the variables. The objective is to find the values of the decision variables that optimize the objective function while satisfying all the constraints.
To solve this problem, we need to use a system of linear inequalities to represent all the constraints. Let's start by defining the variables:
x = number of necklaces
y = number of wristbands
Now we can write the constraints:
Time constraint: Mack has 360 minutes to make the necklaces and wristbands.
40x + 25y ≤ 360
Production constraint: Mack wants to make no more than 12 items.
x + y ≤ 12
Non-negative constraint: Mack cannot make a negative number of necklaces or wristbands.
x ≥ 0, y ≥ 0
To maximize Mack's profit, we need to define the objective function as the total profit:
P = 3x + 2y
Now we can graph these constraints and find the feasible region:
40x + 25y ≤ 360
x + y ≤ 12
x ≥ 0, y ≥ 0
As shown in attachment 1.
The feasible region is the shaded polygon bounded by the lines: x=0, y=0, x + y ≤ 12, and 40x+25y=360.
To find the optimal solution, we need to evaluate the objective function at each corner point of the feasible region:
Corner point A: (0,0)
P = 3(0) + 2(0) = $0
Corner point B: (0,12)
P = 3(0) + 2(12) = $24
Corner point C: (4,8)
P = 3(4) + 2(8) = $28
Corner point D: (9,0)
P = 3(9) + 2(0) = $27
The maximum profit is $28, which occurs when Mack makes 4necklaces and 8 wristbands. Therefore, Mack should make 4 necklaces and 8 wristbands to maximize his profit.
To know more about linear programming problems visit:
brainly.com/question/14309521
#SPJ1
Apnex, Inc. , is a biotechnology firm that is about to announce the results of its clinical trials of a potential new cancer drug. If the trials are successful, Apnex stock will be worth $ 68 per share. If the trials are unsuccessful, Apnex stock will be worth $ 18 per share. Suppose that the morning before the announcement is scheduled, Apnex shares are trading for $ 56 per share
The probability of the trials being successful is 0.625 or 62.5%. So, the expected value of Apnex stock after the announcement is $53.25 per share.
The odds of the trials being successful or failed, as well as the associated stock prices, must be taken into account in order to determine the predicted value of Apnex shares after the announcement.
we can state:
P(success) + P(failure) = 1
Let the market has already taken the probability into account and that the $56 stock price at the moment reflects the stock's anticipated value following the announcement. To put it another way, we can construct an equation based on the anticipated value formula:
Estimated Value = $68 for success and $18 for failure
Also, we are aware that the present stock price and the predicted value are equal:
Estimated Value = $56
When the second equation is substituted for the first equation, we obtain:
P(success) x $68 plus P(failure) x $18 equals $56.
For P(success), we obtain:
P(success) is equal to ($56 - $18) / ($68 - $18), or 0.625.
Thus, 0.625 or 62.5% of the trials will be successful.
We may determine the anticipated value of the shares following the announcement using this probability:
Estimated Value: 0.625 times $68 plus 0.375 times $18 equals $53.25
therefore, $53.25 per share is the anticipated value of Apnex shares following the announcement.
learn more about probability
brainly.com/question/30034780
#SPJ4
The solid below is dilated by a scale factor of 3 3. Find the volume of the solid created upon dilation.
You notice that a stairwell railing is a parallelogram. In parallelogram RALS: ALsegment A L = 26.5 feet RIsegment R I = 5.3 feet ARsegment A R = 6.2 feet What is the area of parallelogram RALS? Use the given information to complete the worksheet.
HELPP I MEED IT
Answer:
To find the area of a parallelogram, we need to multiply the base by the height. In this case, we need to find the height of the parallelogram.
We can see that segment AL and segment RI are both perpendicular to segment AR. Therefore, we can use either of them to find the height.
Let's use segment AL as our height. To find the length of segment LS, we can use the Pythagorean theorem:
LS² = AR² - RI²
LS² = 6.2² - 5.3²
LS² = 16.21
LS = √16.21
LS ≈ 4.02 feet
Now we can find the area of the parallelogram:
Area = base x height
Area = AL x LS
Area = 26.5 x 4.02
Area ≈ 106.23 square feet
Therefore, the area of parallelogram RALS is approximately 106.23 square feet.
Step-by-step explanation:
An SRS of 1000 voters finds that 57% believe that competence is more important than character in voting for President of the United States.
(A) Determine a 95% confidence interval estimate for the percentage of all voters who believe competence is more important than character.
(B) Based on the interval you found in part (a), is it reasonable to assume that a majority of voters believe that competence is more important than character. Explain why or why not.
(C) Explain what is meant by 95% confidence in this situation
(A) A 95% confidence interval estimate for the percentage of all voters who believe competence is more important than character is (0.538, 0.602).
(B) This is due to the interval's lower bound's value of 0.538, which is higher than 0.5.
(C) In this instance, 95% confidence indicates that if the sampling procedure were repeated numerous times and a 95% confidence interval estimate was calculated for each sample
(A) Using the method below, we can calculate an estimate with a 95% confidence interval for the proportion of voters who think competence is more significant than character:
CI equals p z*(sqrt(p*(1-p)/n)/p)).
where: p = the percentage of voters who say character is more essential than competence = 0.57; n = the sample size; 1000; and z = the z-score for a 95% confidence level; 1.96.
By entering the numbers, we obtain:
CI = 0.57 1.96*(sqrt(0.57*(1-0.57)/1000)), which equals 0.57 0.032. (0.538, 0.602)
the 95% confidence interval estimate for the proportion of respondents overall who think competence is more significant than character is (0.538, 0.602).
(B) Based on the range discovered in part, it is reasonable to infer that the majority of voters value competence over character (a). This is due to the interval's lower bound's value of 0.538, which is higher than 0.5. Therefore, we can state with 95% certainty that the actual proportion of voters who think competence is more crucial than character is at least 53.8%, which is a majority.
(C) In this instance, 95% confidence indicates that if the sampling procedure were repeated numerous times and a 95% confidence interval estimate was calculated for each sample, then roughly 95% of those intervals would contain the actual proportion of voters who believe competence is more significant than character. That is to say, we have a 95% confidence interval (0.538, 0.602) that contains the actual proportion of voters who think competence is more significant than character.
Learn more about percentage here:
https://brainly.com/question/29306119
#SPJ4
if the actual length is 28.3m and the scale is 1cm to 2m, what is the length on drawing
The length on drawing with the given scale is 14.15 cm.
How to determine the length on drawingUsing the given scale of 1cm to 2m, we can set up the following proportion to find the length on the drawing:
1 cm : 2 m = x cm : 28.3 m
where x is the length on the drawing that we want to find.
To solve for x, we can cross-multiply and simplify:
1 cm * 28.3 m = 2 m * x cm
Evaluate the products and remove the units
28.3 = 2x
Divide both sides by 2 to solve for x
x = 28.3 / 2
Evaluate
x = 14.15
Therefore, the length on the drawing is 14.15 cm.
Read more about scale factors at
https://brainly.com/question/29229124
#SPJ1
Malaya has 5different shapes of blocks: rectangle, rhombus, square, trapezoid, and triangle. She has 10 of each shape. She selects a block at random.
Using probability, we can find that the probability of getting a triangle shape block when selected at random is 1/5.
Define probability?The chance of an event can be calculated using the probability formula by only dividing the favourable number of possibilities by the total number of potential outcomes.
The likelihood of an event occurring can be anything between 0 and 1, as the favourable number of outcomes can never exceed the total number of outcomes. Therefore, the percentage of successful results cannot be zero.
In the question,
Malaya has 5 different shapes of blocks.
Malaya has 10 blocks of each shape.
So, the total no. of blocks = 5 × 10 = 50.
Now, Malaya has 10 blocks of triangular shape.
probability of getting a triangular shape is:
P = 10/50
= 1/5
Therefore, the probability of getting a triangle shape block when selected at random is 1/5.
To know more about probability, visit:
https://brainly.com/question/30034780
#SPJ1
The complete question is:
Malaya has 5different shapes of blocks: rectangle, rhombus, square, trapezoid, and triangle. She has 10 of each shape. She selects a block at random. What is the probability of getting a triangle shape block when selected at random?
Part C
What is the probability that Geraldo, the 25-year-old you're considering for a 30-year policy, lives to be 55 years old?
Remember that Geraldo is a Hispanic male.
B
IU x
, Font Sizes
-A- A
E 1 E 23
V
Characters used: 0/ 15000
Part D
The probability that client C, the 25-year-old you’re considering for a 30-year policy, lives to be 55 years old is 1.
The potential is implied by the word "probability". This area of mathematics studies how random events occur. The range is the set of values between 0 and 1. Probability has been incorporated into the mathematics to forecast the likelihood of various events. In essence, probability refers to the degree to which something is likely to occur. You can appreciate the possible results of a random experiment using this fundamental probability theory, which is also applied to a probability distribution. Before assessing how likely an event is to occur, we need to know how many possible outcomes there are.
Gerald age = 25 years
Policy considered = 30 years
Age at the end of the policy = 55 years
The probability that Geraldo lives to be 55 years will be:
= P(A + B)
= (25÷55) + (30÷55)
= 55÷55
= 1
learn more about probability,
https://brainly.com/question/30034780
#SPJ4
Pls help due tomorrow
(09.04 MC)
A circle has its center at (−2, 5) and a radius of 4 units. What is the equation of the circle? (1 point)
According to the given conditions , the equation of the circle is [tex](x + 2)^2 + (y - 5)^2 = 16.[/tex]
What is circle ?
A circle is a two-dimensional geometric shape that consists of all points in a plane that are a fixed distance, called the radius, from a given point called the center. A circle can also be defined as the set of all points that are equidistant from a central point.
The equation of a circle with center (h, k) and radius r is:
[tex](x - h)^2 + (y - k)^2 = r^2[/tex]
In this case, the center of the circle is (-2, 5) and the radius is 4, so the equation of the circle is:
[tex](x - (-2))^2 + (y - 5)^2 = 4^2[/tex]
Simplifying this equation gives:
[tex](x + 2)^2 + (y - 5)^2 = 16[/tex]
Therefore, according to the given conditions , the equation of the circle is [tex](x + 2)^2 + (y - 5)^2 = 16.[/tex]
To know more about circle visit:
https://brainly.com/question/24375372
#SPJ1
Complete the table for the quadratic function below. Type the value of y that
corresponds with each value of x.
y=2(x-3)²-2
xy=2(x-3)²-2
1
2
3
4
5
Answer: in the following order:
6
0
-2
0
6
Step-by-step explanation:
Just need to evaluate the function for each value of X
for x=1 y=2(1-3)^2-2= 6
for x=2 y=2(2-3)^2-2= 0
for x=3 y=2(3-3)^2-2= - 2
for x=4 y=2(4-3)^2-2= 0
for x=5 y=2(5-3)^2-2= 6
Observations are taken on sales of a certain mountain bike in 25 sporting goods stores. The regression model was Y= total sales (thousands of dollars), X 1 = display floor space (square meters), X 2 = competitors' advertising expenditures (thousands of dollars), X 3 = advertised price (dollars per unit). (a) Fill in the values in the table given here. (Negative values should be indicated by a minus sign. Leave no cells blank - be certain to enter "0" wherever required. Round your t-values to 3 decimal places and p -values to 4 decimal places.) (b-2) Choose the correct option. Only CompetingAds differs significantly from zero. Only FloorSpace differs significantly from zero. Only Price differs significantly from zero.
zero
Observations are taken on sales of a certain mountain bike in 25 sporting goods stores. The regression model was Y= total sales (thousands of dollars), X 1 = display floor space (square meters), X 2 = competitors' advertising expenditures (thousands of dollars), X 3 = advertised price (dollars per unit).Part a) the table is not given with the question. Please provide the required data and we will try our best to answer your question.The null and alternative hypotheses in a hypothesis test are:H0: βj = 0 Ha: βj ≠ 0j = 1, 2, 3. Since we have 3 predictors in the model so there will be three hypothesis test as well:Null and alternative hypotheses for hypothesis tests for β1, β2, and β3 are as follows:H0: βj = 0 Ha: βj ≠ 0j = 1, 2, 3.Therefore, if the absolute value of the computed t-value is greater than the absolute value of the table t-value for a specified α and n – k – 1 degrees of freedom, then the null hypothesis for that predictor is rejected. Hence, we can say that the predictor variable is significant at the α level.The table for t-values and p-values will be created based on the degree of freedom (d.f), the significance level (α), and the t-distribution function. The t-value is calculated using the following formula:t= (βi- 0) / SE(βi).Part b) Only CompetingAds differs significantly from zero is the correct option.
Learn more about hypothesis
brainly.com/question/29519577
#SPJ4
Erica has 2. 2 pounds of uncooked hamburger meat. A hamburger patty weighs about 6 ounces before it is cooked. Which is the maximum number of hamburger patties that Erica can make? i need help!!
Erica can make a maximum of 5 hamburger patties with the amount of meat she has.
What role do unit conversions have in mathematical and scientific calculations?In scientific and mathematical computations, unit conversions are crucial because they guarantee that data are stated in the proper units, enabling consistency and correctness. To combine or compare numbers and to understand the findings meaningfully, values must be converted to a standard unit of measurement. Calculation mistakes and erroneous conclusions can result from improper unit conversion.
Given that, a hamburger patty weighs about 6 ounces before it is cooked.
Thus,
2.2 pounds = 35.2 ounces (1 pound = 16 ounces)
35.2 ounces / 6 ounces per patty = 5.87
Erica can make a maximum of 5 hamburger patties with the amount of meat she has.
Learn more about units here:
https://brainly.com/question/10433377
#SPJ1
Evaluate the expression shown below and write your answer as a
fraction in simplest form.
1/4 - 1/10
An account with an initial balance of $3500 earns interest that is compounded annually. If no other deposits or withdrawals are made, the account will have a balance of $4390.40 after 2 years.
Answer:
A = P(1 + r/n)^(nt)
Where:
A = the final amount
P = the initial balance
r = the annual interest rate (as a decimal)
n = the number of times the interest is compounded per year
t = the number of years
We know that P = $3500, A = $4390.40, r = unknown, n = 1 (compounded annually), and t = 2. Plugging in these values and solving for r:
$4390.40 = $3500(1 + r/1)^(1*2)
$4390.40/$3500 = (1 + r)^2
1.2544 = (1 + r)^2
√1.2544 = 1 + r
1.12 = 1 + r
r = 0.12 or 12%
Therefore, the annual interest rate is 12%.
its me again ....
loll answer?
thankssss
Estimate less than the actual answer are 9.75 (less than 10) and 9.55 (less than 10). Estimate more than the actual answer are 38.315 (more than 38) and 8.4(more than 8).
What is Estimate?Estimate, a near enough approximation of the true value. To make arithmetic simpler and more understandable, many assumptions are made.
Estimate is less than actual answer :
6.35 + 3.4 = 9.75
2.3 * 4.15 = 9.545 (≈ 9.55)
Estimate is more than actual answer :
7.9 * 4.85 = 38.315
3.6 + 4.8 = 8.4
So here, Estimate less than the actual answer are 9.75 (less than 10) and 9.55 (less than 10). Estimate more than the actual answer are 38.315 (more than 38) and 8.4(more than 8).
To learn more about Estimate, visit :
https://brainly.com/question/28973109
#SPJ1
A popular video game retailer develops apps. The total revenue, in dollars per day, after x days can be modeled by the function R(x) = 2x3 + 11x2 – 23x – 14. The total cost, in dollars per day, after x days, can be modeled by the function C(x) = 13x2 + 11x + 16. After how many days does the retailer start making money?
1
2
5
7
After 5 days, the retailer starts making the money. The solution has been obtained by using the concept of break - even.
What is break - even?
The balance point known as "break-even" results in neither a profit nor a loss. Every value below the break-even mark represents a loss, whereas any value above it represents a gain.
We are given revenue function as R(x) = [tex]2x^3 + 11x^2 - 23x - 14[/tex].
The cost function is given as C(x) = [tex]13x^2 + 11x + 16[/tex].
The retailer will start earning only when the cost will be covered. This means that he will earn after when the R(x) = C(x).
So,
⇒ R(x) = C(x)
⇒ [tex]2x^3 + 11x^2 - 23x - 14[/tex] = [tex]13x^2 + 11x + 16[/tex]
⇒ [tex]2x^3[/tex] = [tex]2x^2 + 34x + 30[/tex]
⇒ [tex]x^3[/tex] = [tex]x^2 + 17x + 15[/tex]
⇒ [tex]x^3[/tex] - [tex]x^2 - 17x - 15[/tex] = 0
⇒ (x - 5) (x + 1) (x + 3) = 0
⇒ x = 5, -1, -3
Since, the days cannot be negative so, x = 5.
Hence, after 5 days, the retailer starts making the money.
Learn more about revenue from the given link
https://brainly.com/question/8645356
#SPJ1
Question:
A popular video game retailer develops apps. The total revenue, in dollars per day, after x days can be modeled by the function R(x) = [tex]2x^3 + 11x^2 - 23x - 14[/tex]. The total cost, in dollars per day, after x days, can be modeled by the function C(x) = [tex]13x^2 + 11x + 16[/tex]. After how many days does the retailer start making money?
a. 1
b. 2
c. 5
d. 7
Angela just subscribe to her favorite magazine she pays $44 for a two-year subscription she gets one magazine per month how much is she paying for each magazine
Answer: The answer is 1.8 or 1.83 repeating
Step-by-step explanation: When you do 44 divided by 24 (2 years) it gives you how much she needs to pay per month.
Answer:
Angela pays $1.83 for each magazine.
Step-by-step explanation:
Considering that there are 12 months in 1 year, there would be 12 * 2 = 24 months in 2 years. If she gets one magazine per month, she would get 24 magazines.
She would be paying $44 / 24 magazines = 11/6 ≈ 1.83.
So, she is paying about $1.83 for each magazine.
Show that x^5-5x^3+5x2+-1=0 has 3 equal roots and find that root
high voltage, inc., a light bulb manufacturer, wants to know if there's a difference in mean life span between its product and that of a competitor. they collect paired data and calculate the difference in each pair to create one set of numbers that represents the differences within each pair. what notation should high voltage use to construct its null and alternative hypotheses?
High Voltage, Inc. should use the following notation to construct its null and alternative hypotheses: Null Hypothesis: H0: μ1 - μ2 = 0; Alternative Hypothesis: H1: μ1 - μ2 ≠ 0; where μ1 represents the mean life span of High Voltage's product and μ2 represents the mean life span of the competitor's product.
The notation High Voltage should use to construct its null and alternative hypotheses is:
(i) Null Hypothesis: H0: μ1−μ2=0
where μ1 represents the mean life span of High Voltage's product and μ2 represents the mean life span of the competitor's product.
(ii) Alternative Hypothesis: Ha: μ1−μ2≠0
Where,μ1 and μ2 are the mean lifespan of the light bulbs of High Voltage and its competitor, respectively.
In this problem, paired samples t-test should be used to test the hypotheses.
Paired sample t-test: It is a statistical procedure used to compare two population means with two samples of dependent observations, where the dependent variable is the same or the same subject measured under different conditions. It is used when the observations are paired, i.e., each pair of observations consists of two measurements made on a single subject or item.
Know more about Null Hypothesis here:
https://brainly.com/question/4436370
#SPJ11
If y =27 when x=9, determine y when x=11
Answer:
[tex]The \: problem \: probably \\ \: assumes \: direct \: variation \: \\ \\
y \: = \: k \: x \\ \\
IF \: so, \: then \: plug \: in \: the \: \\ values \: and solve \: for \: k \\ \\
27 \: = \: k(8) \\ \\
k \: = \: \frac{27}{8}
\\ \\
y \: = \: ( \frac{27}{8} )x. \\ \\ Now \: let \: x \: = \: 11 \\ \\
y \: = \: ( \frac{27}{8} )11 = \\ \\ \frac{27(11)}{8} \\ \\ = 37.125 = \\ \\ \frac{371}{8y} \\ \\
y \: = \frac{371}{8}
[/tex]
What is the volume of this cone?
Use ≈ 3.14 and round your answer to the nearest hundredth.
Height 9 m
Radius 4 m
cubic meters
Coins are placed into a treasure chest, and each coin has a radius of 1.2 inches and a height of 0.0625 inches. if there are 250 coins inside the treasure chest, how many cubic inches of the treasure chest is taken up by the coins? round to the nearest hundredth and approximate using π = 3.14.
a. 0.28 in3
b. 70.65 in3
c. 117.75 in3
d. 282.60 in3
Answer:
i only know the answer (I guessed on but I think it's 70.65
Step-by-step explanation:
let me know if I'm right 0w0