Answer:
This question is incomplete
Explanation:
However, when the carboxylic acids and esters put together are obtained, the procedure below can be followed in drawing and naming them.
For carboxylic acid,
1) it should be noted that the functional group here is -COOH which is drawn as -C = OH
|
OH
2) The carbon of the functional group is included among the carbon to be counted when naming the structure. For example, the compound below is propanoic acid.
CH₃CH₂COOH - As you can see that there are 3 carbons linked chain there.
3) As can be seen in (2) above, the suffix "oic" is used to name carboxylic acids
4) The carbon chain here is saturated (meaning there is no double or triple bond within the carbon chain)
Example of a structure of carboxylic acid is
H₃C - CH₂ - CH₂ - C = OH
|
OH
The structure above is a butanoic acid
For ester
1)The functional group here is -COO- . which can be drawn as
- C = O
|
O -
(meaning one oxygen atom is double bonded to the carbon and the other oxygen atom is bonded to another carbon chain)
2) The alkyl group attached to the oxygen atom is first of all mentioned before the carbon chain attached from the left is mentioned. For example, CH₃CH₂CH₂COOCH₂CH₃ is ethyl butanoate
3) As seen from (2) above, the suffix "oate" is used to end the name of esters
4) As also seen from (2) above, the carbon of the functional group is also included while counting the carbon chain of the parent name (butanoate).
5) The carbon chains here are also saturated.
Example of this ester is
CH₃CH₂C = O
|
O - CH₂CH₃
The name of this compound is ethyl propanoate
7) If the mass of an object is 20 g and its volume is 25 L. What is the density of this object? 1 8) What is the difference between accuracy and precision? Copy and paste a picture of something that accurate but not precise and also something that is precise, but not accurate. 9) What is the formula for percent error?
this is due under 30 mins, please help
Answer:
Accuracy is the closeness of a measured value to the accepted or exact value. The precision of a tool is the smallest unit of measure the tool provides. The smaller the units a tool can measure, the more precise the tool. A measurement can be precise and not be accurate.
Explanation:
Please help I will give brainiest
Answer:
1. Least
2. Most
Answer:
1st one is less 2nd is greater
Explanation:
When a material gains thermal energy and melts, it is undergoing a physical change.
Answer:
True, it undergoes a physical change.
Explanation:
A physical change is a change that does not change the chemical makeup of a material. This includes altering its shape.
As a sample's temperature increases, which two factors also increase?
A. Particle speed
O.B. Particle boiling point
C. Particle kinetic energy
D. Particle size
Help please
Answer:
speed
energy
Answer:
particle speed and particle energy
Explanation:
i just took the quiz on a p e x
A neutral atom becomes a positive ion when it
Answer:
Neutral atoms can be turned into positively charged ions by removing one or more electrons.
Explanation:
If there is an atom that has 9 protons and 9 electrons, removing an electron from the atom will gain a postive charge.
Solid nickel reacts with aqueous lead (II) nitrate to form solid lead. What is the net ionic equation for this reaction? • Hint: In this reaction, nickel exhibits its most common oxidation state of +2. • Be sure to include the charge for each ion in the net ionic equation. Provide your answer below: (s) + (aq) → *(n)
Answer:
Pb²⁺(aq) --> Ni²⁺(aq)
Explanation:
The equation of the reaction is given as;
Ni(s) + Pb(NO₃)₂(aq) --> Pb(s) + Ni(NO₃)₂(aq)
In writing the ionic equation, we break the aqueous compound into ions. The solid and liquid compounds are ignored.
We have;
Pb²⁺(aq) + NO₃²⁻(aq) --> Ni²⁺(aq) + NO₃²⁻(aq)
Canceling the spectator ions;
Pb²⁺(aq) --> Ni²⁺(aq)
Answer:
Ni(s)+Pb2+(aq)→Ni2+(aq)+Pb(s)
Explanation:
The complete ionic equation of this reaction is
Ni(s)+Pb2+(aq)+2 NO−3(aq)→Ni2+(aq)+2 NO−3(aq)+Pb(s)
The nitrate ions are spectator ions and can be removed from the equation, giving us
Ni(s)+Pb2+(aq)→Ni2+(aq)+Pb(s)
Hello I was wondering if anyone knew how to draw the molecular geometry of fentanyl. I already did the Lewis structure.
Answer:
i dont
Explanation:
What evidence should Mitchell collect to BEST support the second law of thermodynamics?
Answer:
The Second Law of Thermodynamics poses an insurmountable problem for ... More time will make things worse for the Darwinist, not better. ... error fail-safe and proof-reading devices utilized for quality control, assembly ... No one really supports the idea that the sun + non life = life
Explanation:
According to the second law of thermodynamics, the energy of the universe is conserved but the entropy of the universe is continuously increasing.
What is the second law of thermodynamics?The second law of thermodynamics put some restrictions on the direction of heat transfer and attainable efficiencies of heat engines. This law stated that any spontaneously happening process will lead to an escalation in the entropy (S) of the universe.
This law explains that the entropy of an isolated system will never decrease with time. Mathematically, the 2nd law of thermodynamics:
ΔS (universe) > 0
where ΔS of the universe is the change in the entropy of the universe.
The second law of thermodynamics provides the criterion for the feasibility of any physical or chemical process. A physical or chemical process cannot take place unless it must follow both the 1st and 2nd laws of thermodynamics.
Learn more about second law of thermodynamics, here:
https://brainly.com/question/1604031
#SPJ2
What volume. In liters, of H2O(g) measured at STP is produced by the combustion of 15.63 g of natural gas (CH4) according to the following equation? CHale) +20269) CO2 + 2H2008)
Answer:
V = 43.95 L
Explanation:
Given data:
Mass of CH₄ decomposed = 15.63 g
Volume of H₂O produced at STP = ?
Solution:
Chemical equation:
CH₄ + 2O₂ → 2H₂O + CO₂
Number of moles of CH₄:
Number of moles = mass/molar mass
Number of moles = 15.63 g/ 16 g/mol
Number of moles = 0.98 mol
Now we will compare the moles of H₂O with CH₄.
CH₄ : H₂O
1 : 2
0.98 : 2×0.98 = 1.96 mol
Volume of hydrogen:
PV = nRT
1 atm × V = 1.96 mol × 0.0821 atm.L/mol.K × 273.15 K
V = 43.95atm.L / 1atm
V = 43.95 L
A beverage manufacturer wants to increase The solunility of carbon dioxide in its carbonated drinks as beverages produced which action will increase the solubility of CO2 gas the most
A. Decreasing the pressure on it
B. Increasing stirring
C. Decreasing its temperature
D. Increasing its temperature
Answer: C
Explanation:
how many grams of diazine (N2H2) are there in 2.55 mol of the compound
Answer:
76.5g is present in 2.55mol of diazine
Explanation:
no. of mole equals mass over molar mass
molar mass of diazine equals 30g/mol.. then substitute to get the mass in grams which is 76.5g
On average what is the time between collisions of a xenon atom at 300 K and (a) one torr pressure; (b) one bar pressure.
Answer:
(a). 132 × 10^-9 s = 132 nanoseconds.
(b)..176.5 pico-seconds.
Explanation:
(a). At one torr, the first thing to do is to find the speed and that can be done by using the formula below;
Speed = [ (8 × R × T)/ Mm × π]^1/2.
Where Mm = molar mass, T = temperature and R = gas constant.
Speed= [ ( 8 × 8.314 × 300)/ 131.293 × π × 10^-3)^1/2. = 220m/s.
The next thing to do now is to calculate for the degree of collision which can be calculated by using the formula below;
Degree of collision = √2 × π × speed × d^2 × pressure/ K × T.
Note that pressure = 1 torr = 133.32 N/m^2 and d = collision diameter.
Degree of collision = √2 × π × 220 × (4.9 × 10^-10)^2 × 133.32/ 1.38 × 10^-23 × 300.
Degree of collision = 7.55 × 10^6 s^-1.
Thus, 1/ 7.55 × 10^6. = 132 × 10^-9 s = 132 nanoseconds.
(b). At one bar;
1/10^5 × 10^3 × 56.65 = 1.765 × 10^-10 = 176.5 pico-seconds.
What is the relationship between temperature and pressure
Select the compound that is most likely to increase the solubility of AgCl when added to water.
a. MgBr2
b. KClO4
c. NH3
d. NaCl
Answer:
c
Explanation:
The compound which increase the solubility of AgCl in water is determined on the basis of the process called common ion effect. The solubility of AgCl will be maximum in NH₃. The correct option is C.
What is common ion effect?The process common ion effect can be defined as the suppression of the dissociation of a weak electrolyte (weak acid or weak base) by the addition of some strong electrolyte containing common ion.
The solubility is defined as the maximum amount of solute that can be dissolved in a given solvent. Here AgCl dissociates into Ag⁺ and Cl⁻ ions. Both KClO₄ and NaCl contain Cl⁻ ions and thus common ion effect takes place. So the solubility decreases.
When AgCl is dissolved in NH₃ it forms a complex [ Ag (NH₃)₂]⁺. So it is highly soluble in NH₃. It is also soluble in water but not more than NH₃.
Thus the correct option C.
To know more about solubility, visit;
https://brainly.com/question/8591226
#SPJ6
What is the specific rotation of a sample of carvone that is an equal mixture of the R and S enantiomers
Answer:
Zero
Explanation:
An an equal mixture of the R and S enantiomers of carvone is called a racemic mixture.
In a racemic mixture, the R enantiomer rotates plane polarized light in one direction while the S enantiomer rotates plane polarized light in another direction.
This cancels out the rotation due to each enantiomer since they are equal in magnitude but opposite in direction leading to a specific rotation of zero for the racemic mixture.
Question 1 of 7
Which sentence correctly explains the change that occurs when ice melts?
Ice melting is a physical change, and the state of the substance remains the same.
Ice melting is a physical change, and the mass of the substance remains the same.
оо оо
Ice melting is a chemical change, and the state of the substance remains the same.
Ice melting is a chemical change, and the mass of the substance remains the same.
Answer:
Explanation:B ice melting is a phiyscal change and the mass of the substance remains the same
Answer:
b
Explanation:
4. Question: What effect does the amount of light have on plant growth?
How many grams of Fe can be produced when 6.50 g of Fe2O3 reacts?
Answer:
Mass of Fe produced = 4.468 g
Explanation:
Given data:
Mass of Fe produced = ?
Mass of Fe₂O₃ react = 6.50 g
Solution:
Chemical equation:
2Fe₂O₃ → 4Fe + 3O₂
Number of moles of Fe₂O₃ ;
Number of moles = mass/molar mass
Number of moles = 6.50 g/159.69 g/mol
Number of moles = 0.04 mol
Now we will compare the moles of iron and ironoxide.
Fe₂O₃ : Fe
2 : 4
0.04 : 4/2×0.04 = 0.08 mol
Mass of iron produced:
Mass = number of moles × molar mass
Mass = 0.08 mol × 55.85 g/mol
Mass = 4.468 g
1 point
Which element requires the least amount of energy to remove its valence electron(s)?
barium
chlorine
oxygen
carbon
Ram has power of 550 watt.What does it mean?
Answer:
for electricity, watts as in back to the future "1.21 jigga watts"!
Explanation:
which of these is a cost of using paper grocery bags
Answer:
15 cents where im from
Explanation:
10 The rate of the reaction between hemoglobin (Hb)
and carbon monoxide (CO) was studied at 20°C.
The following data were collected with all
concentration units in u mol/L. (A hemoglobin
concentration of 2.21 u mol/L is equal to
2.21 x 10 mol/L.)
[Hblo [CO),
Initial Rate
(u mol/L) (u mol/L) (u mol/Ls)
2.21
1.00
0.619
4.42
1.00
1.24
4.42
3.00
3.71
(a) Determine the orders of this reaction with
respect to Hb and CO.
(b) Determine the rate law.
(c) Calculate the value of the rate constant.
(d) What would be the initial rate for an
experiment with [Hb]o =3.36 u mol/L
[CO] =2.40 4 mol/L?
Answer:cookie
Explanation:
formal charge of hcooh
Answer:
What is the question?
in the following chemical reaction between H_2 and Cl_2 to produce HCl, what is the sum of the mass of HCl produced plus the mass of left over reactants when 0.40 g of H_2 completely reacts with 12.35 g of Cl_2?
H_2(g) + Cl_2(g) → 2HCl(g)
Answer:
Left over mass of hydrogen = 0.06 g
Mass of HCl produced = 12.41 g
Explanation:
Given data:
Mass of H₂ = 0.40 g
Mass of Cl₂ = 12.35 g
Mass of left over reactant = ?
Mass of HCl produced = ?
Solution:
Chemical equation:
H₂ + Cl₂ → 2HCl
Number of moles of H₂:
Number of moles = mass / molar mass
Number of moles = 0.40 g/ 2 g/mol
Number of moles = 0.2 mol
Number of moles of Cl₂:
Number of moles = mass / molar mass
Number of moles = 12.35 g/ 71 g/mol
Number of moles = 0.17 mol
Now we will compare the moles of HCl with H₂ and Cl₂.
H₂ : HCl
1 : 2
0.2 : 2×0.2 = 0.4
Cl₂ : HCl
1 : 2
0.17 : 2 × 0.17 = 0.34
Chlorine is limiting reactant.
Mass of HCl produced:
Mass = number of moles × molar mass
Mass = 0.34 mol × 36.5 g/mol
Mass = 12.41 g
Leftover mass of hydrogen:
Cl₂ : H₂
1 : 1
0.17 : 0.17
Number of moles of H₂ react with Cl₂ are 0.17.
Moles remain unreacted = 0.2 - 0.17 = 0.03 mol
Mass left over:
Mass = number of moles × molar mass
Mass = 0.03 mol × 2 g/mol
Mass = 0.06 g
The sum of the mass of HCl produced plus the mass of left over reactants is:
Mass of hydrogen = 0.06 g
Mass of HCl = 12.41 g
Chemical ReactionGiven:
Mass of H₂ = 0.40 g
Mass of Cl₂ = 12.35 g
Mass of left over reactant = ?
Mass of HCl produced = ?
Chemical equation: H₂ + Cl₂ → 2HClNumber of moles of H₂:
Number of moles = mass / molar mass
Number of moles = 0.40 g/ 2 g/mol
Number of moles = 0.2 mol
Number of moles of Cl₂:
Number of moles = mass / molar mass
Number of moles = 12.35 g/ 71 g/mol
Number of moles = 0.17 mol
The moles of HCl with H₂ and Cl₂.
H₂ : HCl
1 : 2
0.2 : 2×0.2 = 0.4
Cl₂ : HCl
1 : 2
0.17 : 2 × 0.17 = 0.34
The chlorine is limiting reactant.
Mass of HCl produced:
Mass = number of moles × molar mass
Mass = 0.34 mol × 36.5 g/mol
Mass = 12.41 g
Leftover mass of hydrogen:
Cl₂ : H₂
1 : 1
0.17 : 0.17
Number of moles of H₂ react with Cl₂ are 0.17.
Moles remain unreacted = 0.2 - 0.17 = 0.03 mol
Mass left over:
Mass = number of moles × molar massMass = 0.03 mol × 2 g/molMass = 0.06 gLearn more about "Moles":
https://brainly.com/question/7287712?referrer=searchResults
what elements make up duralumin( an alloy)?
Answer:
In addition to aluminium, the main materials in duralumin are copper, manganese and magnesium.
Answer:
The original composition has been varied for particular applications; it may contain about 4 percent copper, 0.5–1 percent manganese, 0.5–1.5 percent magnesium, and, in some formulations, some silicon.
What mass is contributed by Br-79?
Answer:
Calculate the mass of BR -79? Bromine has 2 naturally occurring isotopes (Br-79 and Br-81) and has an atomic mass of 79.904 amu
Explanation:
if i get this wrong srry
Predict and write the charges and symbols of the monatomic ions formed by the following atoms: bromine rubidium
Answer: The monoatomic ions formed by bromine and rubidium are [tex]Br^-[/tex] and [tex]Rb^+[/tex] respectively.
Explanation:
When an atom accepts an electron negative charge is created on atom and is called as anion. When atom loses an electron positive charge is created on atom and is called as cation.
The atomic number of bromine and rubidium is 35 and 37 respectively. So, the number of electrons is equal to 35 and 37 respectively. Bromine will gain one electron and rubidium will lose one electron to attain stable electronic configuration to form [tex]Br^-[/tex] and [tex]Rb^+[/tex] respectively.
[tex]Br:35:1s^22s^22p^63s^23p^64s^23d^{10}4p^5[/tex]
[tex]Br^-:36:1s^22s^22p^63s^23p^64s^23d^{10}4p^6[/tex]
[tex]Rb:37:1s^22s^22p^63s^23p^64s^23d^{10}4p^63s^1[/tex]
[tex]Rb^+:36:1s^22s^22p^63s^23p^64s^23d^{10}4p^6[/tex]
25. Which of the following statements concerning atomic structure is/are correct?
1. The nucleus contains most of an atom's mass.
2. The nucleus contains all the positive charge of an atom.
3. Electrons surround the nucleus and account for the majority of an atom's volume.
1 only
2 only
3 only
2 and 3
1, 2, and 3
Answer:
It would be 2 and 3
The image shows the structure of an atom, I hope it helps :)
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option 2,3.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. The nucleus contains all the positive charge of an atom. Electrons surround the nucleus and account for the majority of an atom's volume.
Therefore, the correct option is option 2,3.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
Answer the question below
Answer:
C
Explanation: I think
Describe how simple distillation is used to separate water from an aqueous solution of sodium
sulfate.
Answer:
hbyiy
Explanation: