Answer:
The range of a set of data is the difference between the highest and lowest values. In this case, the highest value is 98 and the lowest value is 65, so the range is 98-65 = 33. This means that the scores on the test ranged from 65 to 98, a difference of 33 points.
The range is a measure of the spread of the data. In this case, the range is relatively large, which means that the scores were spread out over a wide range of values. This suggests that the test was challenging and that there was a wide range of student abilities.
Jennie has 4 gallons of punch that she will pour into pint-size glasses. How many pints will she have?
The required, Jennie will have 32 pints of punch to pour into pint-size glasses.
There are 8 pints in a gallon. So, 4 gallons of punch will contain:
4 x 8 = 32 pints
Therefore, Jennie will have 32 pints of punch to pour into pint-size glasses.
Learn more about unit conversion here:
https://brainly.com/question/19420601
#SPJ1
What is the mean for the following set of data?
4, 4, 6, 10, 12, 13, 15, 16
A. 10
B. 12
C. 11
D. 9
Answer:
The answer to your problem is, C. 11
Step-by-step explanation:
The range of a data set in statistics is the difference between the largest and the smallest values. While range does have different meanings within different areas of statistics and mathematics, this is its most basic definition. Using the MY OWN EXAMPLE example:
( I have used this sample in many of my answers )
2, 10, 21, 23, 23, 38, 38
38 - 2 = 36
The range in this example is 36. Similar to the mean, range can be significantly affected by extremely large or small values. Using the same example as previously:
2, 10, 21, 23, 23, 38, 38, 1027892
The range, in this case, would be 1,027,890 compared to 36 in the previous case. As such, it is important to extensively analyze data sets to ensure that outliers are accounted for.
Thus the answer to your problem is, C. 11
which of the following best explans why the monopolists marginal revenue is less than the sales price
Monopolists are firms that have control over the supply of a particular product or service in a market. Due to this control, they can charge higher prices than competitive firms, which can result in lower quantities sold.
One reason why a monopolist's marginal revenue is less than the sales price is due to the downward-sloping demand curve. As the monopolist increases its sales price, the quantity demanded decreases. This means that the revenue generated from each additional unit sold is lower than the revenue generated from the previous unit sold. In other words, the marginal revenue earned from each unit sold is less than the sales price. This occurs because the monopolist must lower the price of all units sold to sell additional units, which lowers the average revenue earned per unit.
To illustrate this, imagine a monopolist that sells widgets for $10 each. If the monopolist lowers the price to $9, it may sell 10 widgets, resulting in revenue of $90 ($9 x 10). However, if the monopolist maintains the $10 price and only sells 9 widgets, the revenue is $90 ($10 x 9). In this case, the marginal revenue for the 9th unit sold is $0, which is less than the sales price of $10. This is because the monopolist must lower the price of all units sold to sell the additional unit, resulting in a decrease in average revenue per unit. Overall, the monopolist's marginal revenue is less than the sales price due to the downward-sloping demand curve and the need to lower prices to sell additional units.
A monopolist, unlike firms in a competitive market, has significant market power due to the absence of competition. This allows the monopolist to control the market price of their product by adjusting the quantity supplied. When a monopolist wants to sell an additional unit, they must lower the sales price for all units, including the ones already being sold. This is because the demand curve faced by a monopolist is downward-sloping, meaning that in order to sell more units, the monopolist has to decrease the price.
Marginal revenue refers to the additional revenue gained from selling one more unit of the product. As the monopolist lowers the sales price to sell more units, two things happen: the revenue increases from the additional unit sold, but there is also a loss in revenue from the units that were sold at a higher price before the price reduction.
As a result, the marginal revenue is less than the sales price, since it takes into account not only the revenue from the additional unit sold but also the loss of revenue from lowering the price of all units. This relationship between the monopolist's pricing strategy and marginal revenue is a key factor in determining the monopolist's profit-maximizing level of output and price.
Learn more about price at : brainly.com/question/18117910
#SPJ11
X
5. In a swimming pool, two lanes are represented by lines / and m. If a string of flags strung across the lanes is
represented by transversal r, and x = 10, show that the lanes are parallel. Choose the best answer below.
(3x+4)⁰1
J.
(4x-62
m
work?
a. 3x+43(10) + 4 = 34°;
4x-6-4(10)-6-34°
The angles are alternate interior angles and they are congruent, so the lanes are parallel by
the Alternate Interior Angles Theorem.
b. 3x+43(10) + 4 = 34°;
4x-6-4(10)-6-34°
The angles are alternate interior angles, and they are congruent, so the lanes are parallel by
the Converse of the Alternate Interior Angles Theorem.
c. 3x+4=3(10) + 4 = 34°;
Both angles have the same measure of 34 degrees, therefore, both lanes are parallel based on the converse of alternate interior angles theorem. The correct option is: D.
What are Alternate Interior Angles?Two interior angles that alternate each other along a transversal that crosses two parallel lines are said to be alternate interior angles, and they are congruent to each other.
Plugging the value of x, both angles indicated in the image are congruent to each other:
3x + 4 = 3(10) + 4 = 34°;
4x - 6 = 4(10) - 6 = 34°
Therefore, since they are congruent to each other, the lanes are parallel based on the converse of alternate interior angles theorem.
Learn more about the converse of alternate interior angles theorem on:
https://brainly.com/question/10565830
#SPJ1
The middle of {1, 2, 3, 4, 5} is 3. The middle of {1, 2, 3, 4} is 2 and 3. Select the true statements (Select ALL that are true)
A. An even number of data values will always have one middle number.
B. An odd number of data values will always have one middle value
C. An odd number of data values will always have two middle numbers.
D. An even number of data values will always have two middle numbers.
B. An odd number of data values will always have one middle value is true.
D. An even number of data values will always have two middle numbers is also true.
What happens in odd and even set of data?In an odd set of data, there will always be one exact middle number. But in an even set of data, there will be two middle numbers, and they will be the two numbers closest to the center.
So if the middle of {1, 2, 3, 4, 5} is 3 and the middle of {1, 2, 3, 4} is 2 and 3, the correct statements will be;
an odd number of data values will always have one middle value is true.an even number of data values will always have two middle numbers is also true.Learn more about odd and even data here: https://brainly.com/question/2766504
#SPJ1
Question 14 of 24 > uchun The mean weight of loaves of bread produced at the bakery where you work is supposed to be 1 pound. You are the supervisor of quality control at the bakery, and you are concerned that new employees are producing loaves that are too light. Suppose you weigh an SRS of bread loaves and find that the mean weight is 0.975 pound. The P-value for the test is 0.0806. Interpret the P-value. Assuming that the true mean weight of bread loaves produced at the bakery is one pound, there is a 0.0806 probability of getting a sample mean at least as far from 1 pound as 0.975 pounds (in either direction) just by chance in a random sample of 50 bread loaves. The probability that the true mean weight is 1 pound is 0,0806. Assuming that the true mean weight of bread louves produced at the bakery is one pound, there is a 0.0806 probability of getting a sample mean of 0.975 pounds or less just by chance in a random sample of bread loaves. The probability that the true mean weight is less than 1 pound is 0.0806, Assuming that the true mean weight of bread loaves produced at the bakery is one pound, there is a 0.0806 probability of getting a sample mean of 0.975 pounds just by chance in a random sample of bread loaves.
The probability that the true mean weight is 1 pound is 0.0806
In your quality control test, you found that the mean weight of an SRS of bread loaves was 0.975 pounds, and the P-value for the test was 0.0806.
Interpreting the P-value, assuming that the true mean weight of bread loaves produced at the bakery is one pound, there is a 0.0806 probability of obtaining a sample mean at least as far from 1 pound as 0.975 pounds (in either direction) just by chance in a random sample of 50 bread loaves.
The probability that the true mean weight is 1 pound is 0.0806. This means that there is an 8.06% chance of observing a sample mean of 0.975 pounds or less just by random chance when the true mean weight of bread loaves produced at the bakery is one pound.
To know more about "Probability" refer here:
https://brainly.com/question/30034780#
#SPJ11
If g(6) = 3 - 5(6), what is g(x)?
Step-by-step explanation:
g(6) = 3 - 5(6) = 3 - 30 = -27
We know the value of function g at 1 single point, g(6) = -27.
That is not enough to know what function g is.
Since the problem states that g(6) = 3 - 5(6), the problem is trying to guide you into answering that g(x) = 3 - 5x, but this is simply an assumption.
The total number of fans is attendance at a Wednesday baseball game was 48,268. The game had 12,568 more fans than the Tuesday game the day before. How many fans attended each game?
Mary bought 5 packages of 8 cupcakes. How many cupcakes did Mary buy in all?
A] 40
B] 48
C] 35
D] 32
If
�
p is inversely proportional to the square of
�
q, and
�
p is 23 when
�
q is 4, determine
�
p when
�
q is equal to 2
When q is equal to 2, p is equal to 92.
If p is inversely proportional to the square of q, we can write:
[tex]p = k / q^2[/tex]
where k is a constant of proportionality.
To determine the value of k, we can use the given information that p is 23 when q is 4:
[tex]23 = k / 4^2[/tex]
[tex]23 = k / 16[/tex]
[tex]k = 23[/tex] × [tex]16[/tex]
[tex]k = 368[/tex]
Now we can substitute k into the equation for p in terms of q:
[tex]p = 368 / q^2[/tex]
To find p when q is equal to 2, we can substitute [tex]q = 2[/tex]:
[tex]p = 368 / 2^2[/tex]
[tex]p = 368 / 4[/tex]
[tex]p = 92[/tex]
Therefore, when q is equal to 2, p is equal to 92.
We can start by using the inverse proportionality relationship between p and q in the form of an equation:
[tex]p = k / q^2[/tex]
where k is a constant of proportionality. We can find the value of k by using the given information that p is 23 when q is 4:
[tex]23 = k / 4^2[/tex]
[tex]23 = k / 16[/tex]
[tex]k = 23[/tex] × [tex]16[/tex]
[tex]k = 368[/tex]
Now we can substitute the value of k into the equation and solve for p when q is 2:
[tex]p = 368 / 2^2[/tex]
[tex]p = 368 / 4[/tex]
[tex]p = 92[/tex]
Therefore, when q is equal to 2, p is equal to 92.
We are given that p is inversely proportional to the square of q, which means that as q increases, p decreases, and vice versa. This relationship can be expressed mathematically as:
[tex]p = k/q^2[/tex]
To learn more about inverse proportional visit:
https://brainly.com/question/31712244
#SPJ4
Complete Question:
If p is inversely proportional to the square of q, and p is 23 when q is 4, determine p when q is equal to 2.
so I have a solving trig equations review, and this specific problem is giving me some troubles;
5-(3/5)cot=(25+root3)/5
It's supposed to be solved for what radians (pi/3, pi/6, etc) between 0 and 2pi. Any help would be gratefully recieved.
Answer: The equation is 5 - (3/5)cot(x) = (25 + √3)/5.
First, we can simplify the right-hand side by dividing both sides by 5:
(25 + √3)/5 = 5 + √3/5
Next, we can use the identity cot(x) = 1/tan(x) to rewrite the left-hand side:
5 - (3/5)cot(x) = 5 - (3/5)(1/tan(x)) = 5 - 3tan(x)/5
Now we have the equation 5 - 3tan(x)/5 = 5 + √3/5.
Subtracting 5 from both sides, we get:
-3tan(x)/5 = √3/5
Multiplying both sides by -5/3, we get:
tan(x) = -√3/3
Taking the arctangent of both sides, we get:
x = arctan(-√3/3)
Since the range of arctan is (-π/2, π/2), we need to add π to get the other solutions:
x = arctan(-√3/3) + π
x = arctan(-√3/3) + 2π
Using a calculator, we find that arctan(-√3/3) is approximately -0.5236 radians, so the solutions are:
x ≈ 2.6179 radians, 5.7596 radians, 8.9013 radians
Since we are looking for solutions between 0 and 2π, we can add or subtract multiples of 2π to get:
x ≈ 2.6179 radians, 5.7596 radians, 8.9013 radians, 11.0430 radians, 14.1847 radians, 17.3264 radians
These are the solutions to the equation 5 - (3/5)cot(x) = (25 + √3)/5 between 0 and 2π.
Step-by-step explanation:
If x and y vary directly, and X = 3 when y = 15, what is the value of x when y = 25?
Answer:
Step-by-step explanation:
A relation R between the set of the natural numbers and a set S defines a sequence if and only if it is:
A bijection
A one-to-one function
A surjective function
A function
A relation R between the set of natural numbers and a set S defines a sequence if and only if it is a one-to-one function.
A relation R between the set of natural numbers and a set S defines a sequence if and only if it is a function, meaning that each natural number is associated with exactly one element in set S.
It does not necessarily have to be a bijection or a surjective function, but it must be a one-to-one function to ensure that no two distinct natural numbers are associated with the same element in set S.
Therefore, the correct answer is the option: A one-to-one function
Learn more about natural numbers: https://brainly.com/question/10657323
#SPJ11
Create your own problem using physical quantities on inverse variation a i Design a formula using the concepts of variation I and solve that problem and state conclusion]
Using the concept of inverse variation and provide a solution using the appropriate formula.
The intensity (I) of a light source is inversely proportional to the square of the distance (d) from the source. If the intensity of the light source is 100 units when the distance is 2 meters, what is the intensity when the distance is 5 meters?
The inverse variation formula can be written as I = k / d^2, where I is the intensity, d is the distance, and k is the constant of proportionality.
Determine the constant of proportionality (k) using the initial values.
I = 100 units, d = 2 meters
100 = k / (2^2)
100 = k / 4
k = 400
Use the formula with the new distance (5 meters) to find the new intensity.
I = 400 / (5^2)
I = 400 / 25
I = 16 units
The conclusion is stated as:
When the distance from the light source is increased to 5 meters, the intensity of the light decreases to 16 units. This problem demonstrates the concept of inverse variation, as the intensity of the light source is inversely proportional to the square of the distance from the source.
To know more about inverse variation, visit:
https://brainly.com/question/31706418
#SPJ11
\left(2x^{5}-7x^{3}\right)-\left(4^{x2}-3x^{3}\right)
The expression 2x^5 - 7x^3 - (4x^2 - 3x^3) when evaluated is 2x^5 - 10x^3 - 4x^2
Evaluating the expressionFrom the question, we have the following parameters that can be used in our computation:
\left(2x^{5}-7x^{3}\right)-\left(4^{x2}-3x^{3}\right)
Express properly
So, we have
2x^5 - 7x^3 - (4x^2 - 3x^3)
Open the bracket
So, we have
2x^5 - 7x^3 - 4x^2 - 3x^3
Evaluate the like terms
2x^5 - 10x^3 - 4x^2
Hence, the solution is 2x^5 - 10x^3 - 4x^2
Read more about expression at
https://brainly.com/question/15775046
#SPJ1
The concentration c in milligrams per milliliter(mg/ml) of a certain drug in a persons bloodstream T hours after a pill is swallowed is modeled by the approximation c(t) ((5t)/(2+t^3))+0. 05t. Estimate the change in concentration when T changes from 10 to 40 minutes
The change in concentration when T changes from 10 to 40 minutes is 0.20 mg/ml.
The given concentration function is
[tex]c(t) = (5t)/(2+t^3) + 0.05t[/tex]
To estimate the change in concentration when T changes from 10 to 40 minutes, we need to calculate the difference between c(10) and c(40) and express it in milligrams per milliliter.
We need to convert the given time units from minutes to hours. T = 10/60 = 1/6 hours and T = 40/60 = 2/3 hours. Now we can calculate c(1/6) and c(2/3) using the given function:
c(1/6) =
[tex](5(1/6))/(2+(1/6)^3) + 0.05(1/6) = 0.56 mg/ml[/tex]
[tex]c(2/3) = (5(2/3))/(2+(2/3)^3) + 0.05(2/3) = 0.76 mg/ml[/tex]
c(2/3) - c(1/6) = 0.76 - 0.56 =0.20 mg/ml. This means that the concentration of the drug in the bloodstream increases by approximately 0.20 mg/ml when the time changes from 10 to 40 minutes after taking the pill.
The actual change in concentration may vary depending on various factors such as the individual's metabolism, absorption rate, and dosage. It's always best to consult with a healthcare professional for accurate and personalized medical advice.
Learn more about metabolism here:
https://brainly.com/question/31384460
#SPJ4
The scale drawing below represents the side of a ramp. In the scale drawing, two inches equals five feet.
What is the actual area, in square feet, of the side of the ramp?
Answer:
(1/2)(6)(4) = 12 square inches
2 inches = 5 feet, so 4 square inches = 25 square feet.
12/4 = s/25, so s = 75 square feet
i need helpp kjjjjjjjjjjjjjjjjjjjjjjjjj
Answer:
E. (20 × 9) - (3 × 2)
Step-by-step explanation:
The area of the shape can be calculated by using the expression in the following options:
A.
C.
D.
E.
I will give some examples for how we know these options are goving the area:
For option E;
We can draw a smaller polygon to complete the shape.
Then we can multiply height and width of the bigger shape and subtract the area of the smaller poligon (the red rectangle) from the area of the bigger poligon.
For option A;
It has same logic with option E, just missing the step, where it calculates the value of smaller polygon.
Which value Makes the equation true 64/100=6/10+?/100
A.4 B.6 C.40 D.58
The value that makes the equation true is A. 4.
What is a fraction?A fraction is a given number expressed as it numerator divided by its denominator. For example; a/b where a is the numerator and b is the denominator. The types of fraction are: proper, improper and mixed fractions.
In the given question, let the required value be represented by t.
So that;
64/100 = 6/10 + t/100
find the LCM, to have;
64/100 = (60 + t)/100
cross multiply
100*64 = 100*(60 + t)
divide through by 100,
64 = 60 + t
t = 64 - 60
= 4
t = 4
The value that makes the equation true is A. 4.
Learn more about fractions at https://brainly.com/question/78672
#SPJ1
A resistor-inductor-capacitor (RLC-)circuit is modeled by Kirchhoff's Second Law: L di/dt + Ri(t) + 1/c ∫ i(r) dr= V(t) Here, V(t) = 1(1-1, (t)) is the voltage coming from a source, and L, I, C correspond to physical
quantities which we treat as constants. Assuming (0) = 0, describe the corresponding current
function i(t)
In either case, we can solve for A and B using the initial condition i(0) = 0. This gives us the final form of the current function i(t) for the given RLC circuit.
The current function i(t) in the RLC circuit, we need to solve the differential equation given by Kirchhoff's Second Law: L di/dt + Ri(t) + 1/c ∫ i(r) dr= V(t), subject to the initial condition i(0) = 0.
To begin, we can simplify the equation by substituting V(t) = 1/(1+t) and integrating the integral term by parts. This gives us:
L di/dt + Ri(t) + 1/c [i(t) * t - ∫t0 i(t)dt] = 1/(1+t)
Next, we can differentiate both sides with respect to t, which gives:
[tex]L d^2i/dt^2 + R di/dt + i(t)/c = -1/(1+t)^2[/tex]
This is a second-order linear ordinary differential equation with constant coefficients, and we can solve it by assuming a solution of the form i(t) = [tex]e^{(rt)[/tex]. Substituting this into the differential equation and solving for r.
We have two cases, depending on whether the discriminant R^2 - 4L(1/c) is positive, negative, or zero.
Case 1: [tex]R^2 - 4L(1/c) > 0[/tex]
In this case, we have two distinct real roots:
[tex]r_1 = (-R + \sqrt{(R^2 - 4L(1/c)))/(2L} )\\r_2 = (-R - \sqrt{(R^2 - 4L(1/c)))/(2L} )[/tex]
The general solution to the differential equation is then given by:
i(t) = A [tex]e^{(r1t)} + B e^{({(r2t)} - 1/(1+t)^2c[/tex]
Case 2: [tex]R^2 - 4L(1/c) = 0[/tex]
In this case, we have a repeated real root:
r = -R/(2L)
The general solution to the differential equation is then given by:
i(t) = [tex](A + Bt) e^{(rt)} - 1/(1+t)^2c[/tex]
Here A and B are constants determined by the initial conditions.
Learn more about RLC circuit visit: brainly.com/question/28288820
#SPJ4
We are considering a survey of 240 residents of Halifax to inform the government’s perspective on whether rent controls should be maintained in the city. Respondents answer on a 1-5 scale, 1 being strongly disagree and 5 is strongly agree. [Note: in practice, there are some better ways to do this than just to average these numbers together.] Suppose the true population average is 3.5 with a standard deviation of 1.4. (a) 2pts What is the standard error of this survey’s estimate for the mean? (b) 4pts With what probability would this survey miss the true mean of 3.5 by more than 0.1 points?
The standard error of the survey's estimate for the mean is approximately 0.09 and the probability that the survey misses the true mean of 3.5 by more than 0.1 points is approximately 0.13 or 13%.
(a)The standard error of the survey's estimate for the mean is given by:
[tex]SE=\frac{I}{\sqrt{n} }[/tex]
In this case, σ = 1.4, n = 240, so:
[tex]SE= \frac{1.4}{\sqrt{240} } = 0.09[/tex]
Therefore, the standard error of the survey's estimate for the mean is approximately 0.09.
(b) To find the probability that the survey misses the true mean of 3.5 by more than 0.1 points, we need to find the probability that the absolute difference between the sample mean and the true mean is greater than 0.1:
Using a standard normal table or calculator, we can find that the probability of a standard normal random variable being greater than 0.1 / SE ≈ 1.11 is approximately 0.13.
Therefore, the probability that the survey misses the true mean of 3.5 by more than 0.1 points is approximately 0.13 or 13%.
To know more about "Probability" refer here:
https://brainly.com/question/30034780#
#SPJ11
Let V be an n-dimensional vector space with ordered basis α, β
and γ. Let C be the change of coordinate matrix from α to β, B be
the change of coordinate matrix from β to γ and A be the change
The change of coordinate matrix A from basis α to basis γ is the product of the change of coordinate matrices B and C, or A = BC.
To find the relationship between matrices A, B, and C, follow these steps:
Recall the definition of a change of coordinate matrix. It's a matrix that allows us to transform the coordinates of a vector from one basis to another.
Note that to go from basis α to basis γ, we can first go from basis α to basis β, and then from basis β to basis γ.
Let v be a vector in V represented in basis α. To find the coordinates of v in basis γ, we can perform the following transformations:
- Multiply v by matrix C to get the coordinates of v in basis β: v_β = Cv
- Multiply v_β by matrix B to get the coordinates of v in basis γ: v_γ = Bv_β
Since v_β = Cv, we can substitute this into the equation for v_γ:
v_γ = B(Cv)
By associativity of matrix multiplication, we can rewrite the equation as:
v_γ = (BC)v
Notice that the matrix product (BC) is the change of coordinate matrix from basis α to basis γ, which is A. So, we have:
A = BC
In conclusion, the change of coordinate matrix A from basis α to basis γ is the product of the change of coordinate matrices B and C, or A = BC.
Learn more about "matrix": https://brainly.com/question/11989522
#SPJ11
In
the context of mechanical vibrations, explain and differentiate
dynamic instability and resonance phenomena related to vibrations
of linear systems.
The oscillations are bounded and can be controlled by adjusting the damping or the frequency of the excitation.
In mechanical vibrations, dynamic instability and resonance are two important phenomena that can occur in linear systems.
Dynamic instability occurs when a system becomes unstable due to the inherent properties of the system. In other words, if the damping in the system is insufficient to prevent oscillations, the system can exhibit dynamic instability. This can result in unbounded or exponentially growing oscillations, which can lead to failure of the system.
Resonance, on the other hand, is a phenomenon that occurs when the frequency of the excitation matches the natural frequency of the system. This can result in large amplitude oscillations, even if the external force is relatively small. In other words, resonance is a condition in which the system responds strongly to a periodic force that has a frequency close to its natural frequency. Resonance can cause large oscillations, which can be damaging to the system, especially if the frequency of the excitation is close to the natural frequency of the system.
The main difference between dynamic instability and resonance is that dynamic instability is a condition in which the system becomes unstable due to insufficient damping, while resonance is a condition in which the system responds strongly to a periodic force that has a frequency close to its natural frequency. In both cases, the system can exhibit large oscillations, which can be damaging to the system. However, in dynamic instability, the oscillations are unbounded or exponentially growing, while in resonance, the oscillations are bounded and can be controlled by adjusting the damping or the frequency of the excitation.
To learn more about oscillations visit:
https://brainly.com/question/30111348
#SPJ11
If ABCD is a rectangle, and A(1, 2), B(5, 2), and C(5, 5), what is the coordinate of D?
Answer: (1, 5)
Step-by-step explanation:
Hope this helps! :)
You deposit $975 in an account that pays 5.5% annual interest compounded continuously. What is the balance after 6 years?
$26,434.82
$1251.36
$2711
$1356.19
The balance after 6 years on an account that pays 5.5% annual interest compounded continuously with an initial deposit of $975 is $1,356.19.
Continuous compounding involves calculating the interest earned on a principal amount continuously over time, which results in a higher overall balance than other compounding frequencies.
Using the formula A = Pe^(rt), where A is the final balance, P is the initial deposit, r is the interest rate, and t is the time, we can calculate the balance after 6 years as A = 975e^(0.055*6) = $1,356.19. Therefore, the correct answer is option D, $1,356.19.
Learn more about Balance:
brainly.com/question/28699225
#SPJ11
A straight ladder of length 7.1 m rests against a vertical wall.
A person climbing the ladder should be “safe" as long as the foot of the ladder makes an angle of between 70° and 80° with the horizontal ground. Determine the minimum and maximum heights that the ladder can safely lie against the wall.
The minimum and maximum heights that the ladder can safely lie against the wall is 6.7 and 6.99 meters.
The minimum and maximum height that the ladder can safely lie against the wall is
sin theta = perpendicular/hypotenuse
Now keeping the each value of theta with hypotenuse to find the perpendicular height.
sin 70 = perpendicular/7.1
Keep the value
Perpendicular = 0.94 × 7.1
Multiply the digits
Perpendicular = 6.7 meters
sin 80 = perpendicular/7.1
Perpendicular = 0.99 × 7.1
Perform multiplication
Perpendicular = 6.99 meters
Thus, minimum and maximum heights are 6.7 and 6.99 meters.
Learn more about perpendicular -
https://brainly.com/question/64787
#SPJ1
assume the weights of apples in a large collection of apples have a normal distribution with a mean of 9 ounces and a standard deviation of 2 ounces. what percentage of the apples can you expect to weigh: (a) between 9 and 11 ounces?
If we have a large collection of apples with a normal distribution of weights with a mean of 9 ounces and a standard deviation of 2 ounces, we can expect that about 34.13% of the apples will weigh between 9 and 11 ounces.
To find the percentage of apples that can be expected to weigh between 9 and 11 ounces, we need to find the area under the normal distribution curve between these two values.
First, we need to standardize the values by subtracting the mean and dividing by the standard deviation:
z1 = (9 - 9) / 2 = 0
z2 = (11 - 9) / 2 = 1
Next, we can use a standard normal distribution table or calculator to find the area under the curve between z1 and z2. This area represents the percentage of apples that can be expected to weigh between 9 and 11 ounces.
Using a standard normal distribution table, we can find that the area between z = 0 and z = 1 is 0.3413. This means that approximately 34.13% of the apples can be expected to weigh between 9 and 11 ounces.
You can learn more about standard deviation at: brainly.com/question/23907081
#SPJ11
A composite figure is composed of a semicircle whose radius measures 3 inches added to a square whose side measures 10 inches. A point within the figure is randomly chosen.
What is the probability that the randomly selected point is in the semicircular region?
Enter your answer rounded to the nearest tenth.
The probability of the randomly selected point is in the semicircle is equal to 0.1.
Side length of a square = 10inches
Radius of the semicircle = 3 inches
Area of the composite figure = sum of area of semicircle and the area of the square.
The area of the semicircle is equal to,
= (1/2)π(3 in)²
= 4.5π in²
The area of the square is,
=(10 in)²
= 100 in²
The total area of the composite figure is,
= 4.5π + 100
≈ 114.1 sq in (rounded to one decimal place)
The area of the semicircular region is half the area of the semicircle,
= (1/2)(4.5π)
= 2.25π sq in
The probability 'P' of randomly selecting a point within the semicircular region is,
P = (area of semicircular region) / (total area of composite figure)
⇒P = (2.25π sq in) / (114.1 sq in)
⇒P ≈ 0.0619
Rounding to the nearest tenth, the probability is approximately 0.1
Therefore, the probability of randomly selected point is a part of semicircle region is equal to 0.1( nearest tenth ).
Learn more about probability here
brainly.com/question/14307862
#SPJ1
Answer: 12.4%
Step-by-step explanation:
I took the quiz
PLS HELP ASAP THANKS
The x-value of the vertex of the given quadratic equation is -2.
How to find the x value of the vertexQuadratic equation in standard vertex form is written as:
f(x) = a(x - h)^2 + k
Definition of parameters
a is the coefficient of the quadratic term, and (h, k) represents the coordinates of the vertex of the parabola.In the given equation:
7(x + 2)^2 - 7
We can see that
a = 7
h = -2
k = -7
f(x) = 7(x - (-2))^2 - 7
Learn more about vertex at
https://brainly.com/question/525947
#SPJ1
A spinner is divided into three sections: red, blue, and green. The red section is 2/5 of the area of the spinner. The blue section is 1/2 of the area of the spinner. Give the probability for each outcome. Express your answers as fractions.
The probability of landing on red is 4/11, the probability of landing on blue is 5/11, and the probability of landing on green is 2/11.
Since the spinner is divided into three sections, the sum of the areas of these sections must equal the total area of the spinner, which we can consider to be 1.
Let R be the area of the red section, B be the area of the blue section, and G be the area of the green section. We know that:
R = (2/5) * 1 = 2/5 (since the red section is 2/5 of the total area)
B = (1/2) * 1 = 1/2 (since the blue section is 1/2 of the total area)
To find the area of the green section, we can subtract the areas of the red and blue sections from the total area:
G = 1 - R - B = 1 - 2/5 - 1/2 = 1/10
Now, we can find the probability of each outcome by dividing the area of each section by the total area:
Probability of red = R / (R + B + G) = (2/5) / (2/5 + 1/2 + 1/10) = 4/11
Probability of blue = B / (R + B + G) = (1/2) / (2/5 + 1/2 + 1/10) = 5/11
Probability of green = G / (R + B + G) = (1/10) / (2/5 + 1/2 + 1/10) = 2/11
To learn more about probability click on,
https://brainly.com/question/31384757
#SPJ1