Answer:
Zinc reacts with dilute sulphuric acid to produce hydrogen gas (H2) and zinc sulphate. This is an example of displacement reaction of a non-metal by a metal. ... ZnSO4 is different in chemical composition and chemical properties than Zn and H2SO4 so it is a chemical change.
Answer:
Reaction of Zinc with Dilute Sulphuric Acid
Zinc is more reactive than hydrogen and it displaces hydrogen from dilute acids. Zinc reacts with dilute sulphuric acid to form zinc sulphate and hydrogen gas is evolved. This is a single displacement reaction of a non-metal by a metal. ... So, this reaction is a chemical change.
. A student adds 50 mL of Lead (II) Nitrate solution to 50 mL of potassium iodide. Each
solution is colorless, but when these two liquids are mixed, a yellow precipitate is
observed. What has most likely happened in the experiment?
Answer:
after the reaction between Lead (II) Nitrate solution and potassium iodide occur Lead(II) iodide was formed and it's yellow color.
Explanation:
Pb(NO3)2 + KI = KNO3 + PbI2
HELP ASAP DUE IN 5 MINUTES WILL GIVE BRAINLIEST
Energy is conserved within a system, meaning that forms of energy are either transferred or transformed as they interact with objects. Which of the statements below correctly describe how energy is transferred or transformed in daily life?
Group of answer choices
Kinetic energy transforms into thermal energy when a heating pad is turned on.
Electrical energy is transferred into light energy so that a flashlight generates light when it’s turned on.
Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street.
Nuclear energy is transferred to electrical energy to provide electricity for our homes.
Answer:
i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right
Explanation:
Answer:
i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right
Explanation:
Which chemical equation below is not balanced?
- 3 MgSO4 + 2 Nag PO4 → Mgs (PO4),+3 Na, S04
- 2 NaOH + HNO, → NaNO, + 2 H,0
- CH12 O6 4 6O2 → 6 CO, + 6 H,0
- HBr AGNO, → HNO, + AgBr
pic if needed ;)
Answer:
B
Explanation:
The second one is not balanced correctly.
2 NaOH + 2HNO3 → 2NaNO3 + 2 H20
I didn't notice this before but it can be balanced without the twos.
NaOH + HNO3 → NaNO3 + H20
It was still wrong. It needed to have the twos removed, not 2 more added. Adding two more isn't wrong, but it should be balanced without 2s if at all possible.
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide?
A. one
B. two
C. three
D. four
E. none
Also, state why.
Answer:
E
because it forms the ionic bond but not covalent.
Please help....thank you
Answer:
a. volcanic changes create new land
Help me if you know this pleaseeee
Answer:
help you with what?
Explanation:
a) Calculate the standard reaction entropy for the combustion of methane to carbon dioxide and liquid water at 298 K. b) Calculate the standard reaction entropy for the hydrolysis of liquid water to form oxygen and hydrogen gas. c) Do your results in (a) and (b) agree with the general rule that reaction entropies are positive if there is a net formation of gas in a reaction, and negative if the is a net reduction of gas?
Answer: (a) [tex]\Delta S^{0}[/tex] = - 242.2J/K.mol
(b) [tex]\Delta S^{0}[/tex] = 163.34J/K.mol
(c) Yes
Explanation: Entropy is the measure of randomness or disorder of a system. Standard Entropy has the symbol [tex]S^{0}[/tex].
Mathematically, Entropy is defined as
[tex]\Delta S^{0}=\Sigma S^{0}(products)-\Sigma S^{0}(reagents)[/tex]
Each substance has its own entropy value.
(a) Combustion of Methane:
[tex]CH_{4}+2O_{2}[/tex] ⇒ [tex]CO_{2}+2H_{2}O[/tex]
Using standard entropy table, entropy will be:
[tex]\Sigma S^{0}(products)=214+2(69.91)[/tex] = 353.8
[tex]\Sigma S^{0}=186.264+2(205.138)[/tex] = 596.54
[tex]\Delta S^{0}=[/tex] 353.8 - 596.54
[tex]\Delta S^{0}=[/tex] - 242.2
Standard Entropy for combustion of methane is [tex]\Delta S^{0}=[/tex] - 242.2 J/K.mol.
(b) Hydrolysis of Water:
[tex]H_{2}O_{(l)}[/tex] ⇒ [tex]H_{2}_{(g)}+1/2O_{2}_{(g)}[/tex]
[tex]\Sigma S^{0}(products)=130.684+0.5(205.138)[/tex] = 233.253
[tex]\Sigma S^{0}(reagents)=69.91[/tex]
[tex]\Delta S^{0}=[/tex] 233.253 - 69.91
[tex]\Delta S^{0}=[/tex] +163.34
Standard Entropy for hydrolysis of water is [tex]\Delta S^{0}=[/tex] + 163.34 J/K.mol
(c) Yes, the results prove the general rule: Reactions Entropies are positive for net formation of gas and negative for net reduction of gas. This happens because, as entropy is the measure of disorder, the entropy for gases are greater than for liquids and solids. So, when there is formation of a gas, Entropy increases and when there isn't, entropy decreases.
What would have a higher boiling point water or hydrocarbon ( from penny liquid stacking)
Answer:
Im pretty sure its hydrocarbon
Explanation:
how can use a BIPHASIC LIQUIDS
Answer:
BIPHASIC LIQUIDS are used ear cleaning, to softening the wax so that mild infections can be treated.
Explanation:
BIPHASIC LIQUIDS are liquids that contain two immiscible phases, one is suspension and the other is emulsion. In suspension, the finely solid are dispersed in a liquid or semi solidwhich is use for medicament
The emulsion consist of immiscible liquids, one is dispersed in globules.
They are used ear cleaning, to softening the wax so that mild infections can be treated.
bond energy is the greatest for?. a: Ch4 b: O2 c: N2 d: Cl2
It's answer is c. N2
The maximum bond energy is of N2 because N2 molecule is formed by 3 covalent bonds and O2 molecule is formed by 2 covalent bonds.
Hope it helps :)
g In this equation stands for the Rydberg energy, and stands for the principal quantum number of the orbital that holds the electron. (You can find the value of the Rydberg energy using the Data button on the ALEKS toolbar.) Calculate the wavelength of the line in the emission line spectrum of hydrogen caused by the transition of the electron from an orbital with to an orbital with . Round your answer to significant digits.
The complete question is attached to this answer
Answer:
2.75 * 10^-5 m
Explanation:
The energy of the absorbed photon = ΔE
ΔE = - Ry (1/n^2 final - 1/n^2initial)
Given that Ry = 2.18 *10^-18 J
nfinal = 9
ninitial =8
ΔE = - 2.18 *10^-18 (1/9^2- 1/8^2)
ΔE = - 2.18 *10^-18 (0.0123 - 0.0156)
ΔE = 7.194 * 10^-21 J
But
ΔE =hc/λ
h = 6.6 *10^-34Js
c= 3 * 10^8 ms-1
λ= the unknown
λ= hc/ΔE
λ= 6.6 *10^-34 * 3 * 10^8/ 7.194 * 10^-21
λ= 2.75 * 10^-5 m
Suppose you wish to determine the order of the reaction. You initially measure a rate, r0, given some arbitrary concentration of reactants. You then proceed to double the amount of A in the reaction (keeping B the same) and find that the rate is now 2r0. In a reciprocal experiment, you double the amount of B (A same as initial) in the reaction and measure a rate of 8r0. What is the order of this reaction
Answer:
See explanation
Explanation:
Now taking A, we can see that if we double the amount of A while keeping the amount of B constant, the rate of reaction doubles, hence we can write;
2^n = 2^1
hence n =1
For B, when the amount of B is doubled while keeping the amount of A constant, the rate of reaction increases eight times. Hence we can write;
2^n = 8
2^n = 2^3
n=3
Hence this reaction has an overall order of 1 + 3 = 4
So we can write;
rate =k[A] [B]^3
What else is produced when sodium carbonate decomposes?
Na2Co3 - Na2O+
Answer:When a single compound breaks down into two or more compounds or elements in a chemical reaction then it is known as decomposition reaction.
The chemical symbol for sodium carbonate is .
The decomposition of sodium carbonate is:
The decomposition of sodium bicarbonate, will result in the formation of sodium oxide, and carbon dioxide, .
Hence, carbon dioxide, will produce with sodium oxide, on decomposition of .
Explanation:Na2CO3 Na2O +CO2 CO2 is the answer
please help me i will give brain list
Answer:
a. pentane = C5H12
b. Heptane = C7H16
c. Hexyne = C6H10
d. Octene = C8H16
e. Nonane = C9H20
Hope it helps.
1-pentene
Molecular Formula C5H10
Condensed Structural FormulaCH2=CH(CH2)2CH3
Melting Point (°C)–138
Boiling Point (°C)30
2- heptane is the straight-chain alkane with the chemical formula H3C(CH2)5CH3 or C7H16, and is one of the main components of gasoline (petrol).
What ratio of concentration of ammonia and ammonium chloride should be mixed to
prepare a buffer solution of pOH 5? (Kb for NH3 =1.8 x 10-4)
The ratio of concentration of ammonia and ammonium chloride : 0.05
Further explanationGiven
pOH=5
Kb for NH3 =1.8 x 10-4
Required
The ratio of concentration of ammonia (NH₃) and ammonium chloride(NH₄Cl)
Solution
Solutions containing ammonia and its salt: ammonium chloride are called alkaline buffers
Can be formulated : ( for the same of the volume, mol=concentration)
[tex]\tt \displaystyle [OH-]=Kb\times\frac{weak\:base\:mole}{salt\:mole\times valence}[/tex]
pOH=-log [OH⁻]
pOH=5⇒[OH⁻]=10⁻⁵
Valence for NH₄Cl = 1, so the concentration ratio :
[tex]\tt 10^{-5}=1.8\times 10^{-4}\times \dfrac{[~NH_3]}{[NH_4Cl]}\\\\0.05=\dfrac{[~NH_3]}{[NH_4Cl]}[/tex]
the initial internal energy of a system is 43.5kj. it absorbs 8.3kj of heat while performing 3.5kj of work on the surroundings. what is its final internal energy?
Shows works to help me understand what I did wrong.
Answer:
[tex]U_2=48.3kJ[/tex]
Explanation:
Hello!
In this case, since the fist law of thermodynamics helps us to understand how the change in internal energy is defined in terms of the head added to the system and the work done by the system:
[tex]Q+W=\Delta U[/tex]
In such a way, since 8.3 kJ of heat are absorbed by the system, 3.5 kJ are done by the system and the initial internal energy is 43.5 kJ, the final internal energy turns out:
[tex]U_2=U_1+Q-W\\\\U_2=43.5kJ+8.3kJ+3.5kJ\\\\U_2=48.3kJ[/tex]
Best regards!
When the volume of a gas is
changed from 3.6 L to 15.5 L, the
temperature will change from
°C to 87°C.
Assume that the number of moles and the
pressure remain constant.
Be sure to notice that temperatures are
given in °C!
Answer:
-189.55°C
Explanation:
Given data:
Initial volume of gas = 3.6 L
Final volume of gas = 15.5 L
Initial temperature = ?
Final temperature = 87°C (87+273 = 360 K)
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ /V₂
T₁ = 3.6 L × 360 K / 15.5 L
T₁ = 1296 L.K / 15.5 L
T₁ = 83.6 K
Kelvin to °C:
83.6 K - 273.15 = -189.55°C
Which of the following elements in a nonmetal? *
Zinc (Zn)
O Barium (Ba)
Krypton (Kr)
Lithium (Li)
Answer:
Krypton (Kr)
Explanation:
Nonmetals are the elements that have opposing features and characteristics of metals. Nonmetals do not shine and are dull in appearance. They are bad conductors of heat and electricity. They are brittle and cannot be beaten into sheets. The density, melting and boiling points of the nonmetals are low. Krypton (Kr) is a non metal whose atomic number is 36.
Create an atom diagram using the Bohr model. Directions Choose three elements from the following list. Use a periodic table to determine the number of protons, neutrons, and electrons. Draw a diagram of each element you have selected. Use a separate piece of paper for each element. Be sure your drawing is neat, legible, and accurate. Use this data table to record information about each element. Element #1 Element #2 Element #3 Element #4
Answer:
Explanation:
proposed an early model of the atom as a central nucleus containing protons and neutrons being orbited by electrons in shells. As previously discussed, there is a connection between the number of protons in an element, the atomic number that distinguishes one element from another, and the number of electrons it has. In all electrically-neutral atoms, the number of electrons is the same as the number of protons. Each element, when electrically neutral, has a number of electrons equal to its atomic number.
Answer:
You can check diagram with number of proton neutron and electrons
Explanation:
What are the rules for writing
names/formulas for ionic
compounds? Give examples
where you need to produce
the formula from the name
AND the name from the
formula. Make sure to
include examples of
transition metals and
polyatomic ions.
Which compound would you expect to be soluble in the nonpolar solvent carbon disulfide?
Answer:
hexane C6H14
IS YOUR ANSWER
Explanation:
I HOPE IT HELPS MATE
MARK ME BRAINLIEST PLS
I WILL ALWAYS HELP YOU UNDERSTANDING YOUR ASSINGMENTS
HAVE A GREAT DAY
#CAPTAINPOWER :)
Show the calculation of the molality of a solution made by dissolving 15.9 grams of Ca3(PO4)2 in 400 grams of water.
The molality of a solution : 0.128 m
Further explanationGiven
15.9 g of Ca3(PO4)2 in 400 grams of water.
Required
The molality
Solution
molality = mol solute / kg solvent
solute= Ca3(PO4)2(MW=Molecular Weight: 310.2 g/mol)
mol solute :
[tex]\tt \dfrac{15.9}{310.2}=0.0512[/tex]
The molality :
[tex]\tt \dfrac{0.0512}{0.4~kg}=0.128~m[/tex]
HELPPPPPP
is this
1:conduction
2:radiation
3:convection
Answer:
Radiation
Explanation:
Sun rays shine on earth. Thats radiation.
which event would most likely lead to a thunderstorm g i v i n g b r a i n l e s i t
Answer:
A
Explanation:
I took a test like this and my teacher said this was right so ye. hopefully I remembered correctly if its wrong im sorry ;C
Answer: A
Explanation: A thunderstorm forms when warm, moist air rises into cold air. Hope this helps. :)
According to the collision theory, which is required for a high number of effective collisions? a very low amount of force from colliding molecules a very low amount of kinetic energy from colliding molecules molecular collisions that have very specific orientations molecular collisions with energy to overcome activation energy
Answer:
the answer is D
Explanation:
i answered c and got it wrong on edg... i hope this helps :)
According to the collision theory, molecular collisions that have very specific orientations are required for a high number of effective collisions.
What is collision theory?Collision theory is used to predict the rates of chemical reactions, particularly for gases.
Based on the collision theory, a high frequency of effective collision is dependent on the molecular collisions that have very specific orientations.
The collision theory suggests that for reactions to occur, there must collision between reacting particles.
The number of collision is dependent on the number of collision per unit time as well as fractions of effective collision.
To attain effective collision, colliding particles must be properly oriented to give the desired product.
Hence, option C is correct.
Learn more about collision theory here:
https://brainly.com/question/20628781
#SPJ2
Elisa feels tired because she has a condition that affects whether the right molecules are getting to her cells. If her body were functioning correctly, this is what would happen with oxygen:
Answer:
It would be working properly and providing her energy for her daily activities.
Explanation:
Hello!
In this case, since her oxygen is actually working properly, it is going to be travelling throughout her entire body (via blood) and therefore carbon dioxide would be released as the exhalation product due to cellular respiration carried out in the alveoli which provides energy for her daily activities.
However, the intrusion of different molecules to oxygen into her cells may affect the rate at which cellular respiration is carried out and therefore she may feel tired because such process provides energy to the body.
Best regards!
The Lewis diagram for BH2 is:
[H-B-H]-
The electron- pair geometry around the B atom in BH2 is:__________.
There are______lone pair(s) around the central atom, so the geometry of BH2 is________ .
Answer:
Electron pair geometry- trigonal planar
There is one lone pair around the boron atom
The geometry of BH2 is bent
Explanation:
The valence shell electron pair repulsion theory offers a frame work for determining the shape of molecules based on the number of electron pairs of the valence shell of the central atom in the molecule.
In BH2-, the central atom is boron. There is a lone pair on boron. Owing to the lone pair on boron, the molecular geometry of BH2 is bent.
The geometry of the electron pair around the Boron atom in [tex]BH_2[/tex] is called the trigonal planar. In this case, there is a pair of isolated electrons around Boron, which is the central atom, allowing the [tex]BH2[/tex] molecule to have a folded geometry.
We can arrive at this answer because:
Boron is an element that has three electrons in its valence layer.With this, we can find out that it can make three covalent bonds or donate these electrons to achieve chemical stability.In the case of the [tex]BH_2[/tex] molecule, boron forms covalent bonds with Hydrogen.These bonds allow the Hydrogens to be positioned on either side of the Boron molecule, forcing a pair of their electrons to focus on the center of that molecule, until it is attracted to the extremities.This allows for a folded geometry around the molecule, allowing Boron to be an exception to the octet rule and achieve stability with 5 electrons in the valence layer.
More information:
https://brainly.com/question/22403376?referrer=searchResults
The table shows four reactions.
Reactions
Reaction Equation
C₃ H8+ 50₂ 3C02 + 4H20
2Ca + O2- 2CaO
AgNO3 + NaCl
AGCI + NaNO3
CH3COOH + 202 - 2CO2 + 2H20
4
Which of the above reactions is an example of combustion of an Inorganic substance? (5 points)
Answer: 2
Explanation:
A combustion reaction must include O2 as a reactant.
An inorganic substance almost never includes carbon.
So, by process of elimination:
1. Carbon is a reactant = probably not
2. Has O2, no carbon = yes
3. O2 is not a reactant = no
4. Carbon is a reactant = probably not
An example of the combustion of an inorganic substance is:
2 Ca + O₂ ⇒ 2 CaO
We have 4 reactions and we want to determine which is an example of combustion of an inorganic substance.
What is combustion?A combustion reaction is a reaction in which a substance reacts with oxygen gas, releasing energy in the form of light and heat.
What is the difference between organic and inorganic substances?Organic substances always contain carbon while most inorganic substances do not contain carbon.
Let's consider the following reactions.
C₃H₈ + 5 O₂ ⇒ 3 CO₂ + 4 H₂OThis is a combustion reaction but C₃H₈ is an organic substance.
2 Ca + O₂ ⇒ 2 CaO
This is an example of the combustion of an inorganic substance.
AgNO₃ + NaCl ⇒ AgCI + NaNO₃
This is not a combustion reaction.
CH₃COOH + 2 O₂ ⇒ 2 CO₂ + 2 H₂O
This is a combustion reaction but CH₃COOH is an organic substance.
An example of the combustion of an inorganic substance is:
2 Ca + O₂ ⇒ 2 CaO
Learn more about combustion here: https://brainly.com/question/4155165
PLEASE HELP WILL GIVE BRAINLIEST
Answer: B
We use stoichiometric amounts of P4 and PH3
NO.9) It's actual yield
Pure sodium metal reacts violently with water according to the equation below
Na + H2O - NaO + H2
17 mol
If 0.75 mol of Na is placed in 500 g of
H,O how many moles of hydrogen
gas will be produced?
0.75 mol
28 mol
1.5 mol
Answer:
0.75 mol
Explanation:
Given data:
Number of moles of Na = 0.75 mol
Mass of water = 500 g
Moles of hydrogen gas produced = ?
Solution:
Chemical equation:
Na + H₂O → NaO + H₂
Number of moles of water:
Number of moles = mass/molar mass
Number of moles = 500 g/ 18 g/mol
Number of moles = 27.8 mol
now we will compare the moles of hydrogen gas with both reactant.
Na : H₂
1 : 1
0.75 : 0.75
H₂O : H₂
1 : 1
27.8 : 27.8
sodium will act as limiting reactant it produced small number of moles of hydrogen gas as compared to water.
Thus, number of moles of hydrogen gas are 0.75 mol.