Describe and provide detailed mechanism (use arrow pushing) for the preparation of 1,2- dibromo-1,2-diphenylethane 2 pts Provide potential undesired (side) reaction that can occur during the preparation of the 1,2- dibromo-1,2-diphenylethane_.

One mole of CaCl₂contains 2 moles of chloride ions.

Calcium chloride (CaCl₂) is a salt that consists of one calcium ion (Ca2+) and two chloride ions (Cl-). Therefore, one mole of CaCl₂ contains two moles of chloride ions (2 Cl-).

To calculate the number of moles of Cl- in one mole of CaCl₂, we can use the formula:

moles of Cl- = 2 x moles of CaCl₂

Since one mole of CaCl₂ contains 1 mol of calcium ion and 2 moles of chloride ions, the total number of moles in one mole of CaCl₂is:

1 + 2 = 3 moles

So, the number of moles of Cl- in one mole of CaCl₂ is:

moles of Cl- = 2 x moles of CaCl₂ = 2 x 1 = 2 moles

Therefore, one mole ofCaCl₂ contains 2 moles of chloride ions.

Learn more about chloride ions.

https://brainly.com/question/31606403

#SPJ4

The form of the Arrhenius equation that can be conveniently used to calculate Ea for a reaction is the ln(k2/k1) = Ea/R * (1/T1 - 1/T2) form. This equation allows us to determine the activation energy (Ea) of a reaction by comparing the rate constants (k) of the reaction at two different temperatures (T1 and T2).

To calculate the activation energy (Ea) for a reaction, you can conveniently use the linear form of the Arrhenius equation. The linear form is given as:

ln(k) = -Ea/(R*T) + ln(A)

where:
- k is the reaction rate constant
- Ea is the activation energy
- R is the gas constant (8.314 J/(mol*K))
- T is the temperature in Kelvin
- A is the pre-exponential factor

To determine Ea, you can perform the reaction at different temperatures, measure the corresponding rate constants (k), and plot ln(k) against 1/T. The slope of the resulting line is equal to -Ea/R, from which you can calculate the activation energy (Ea) for the reaction.

Learn more about :

Arrhenius equation : brainly.com/question/30514582

#SPJ11

Here's a classification of the given processes into exothermic and endothermic categories:

(a) Combustion: Exothermic. Combustion releases heat as chemical bonds are broken and new ones are formed, usually accompanied by the release of energy.

(b) Freezing water: Exothermic. During freezing, water molecules lose energy and form a solid structure, releasing heat in the process.

(c) Melting ice: Endothermic. Melting ice requires the absorption of heat to break the bonds between water molecules in the solid state and convert them into a liquid state.

(d) Boiling water: Endothermic. Boiling water involves the absorption of heat to convert liquid water into water vapor.

(e) Condensing steam: Exothermic. During condensation, water vapor molecules release heat as they transition from the gaseous state to the liquid state.

(f) Burning paper: Exothermic. Burning paper is a form of combustion, where chemical reactions release heat as the paper is broken down.

To know more about the exothermic & endothermic refer here :

https://brainly.com/question/4345448#

#SPJ11

False. The equation AlCl4- + 2H+ = AlCl3 + H2O + HCl is balanced. This is due to the fact that two H+ ions are required to balance the -1 charge of AlCl4- and the charges on either side of the equation.

Due to differences in the amount of atoms of each element on the two sides, the above equation is not balanced. We must add coefficients to the reactants and products in order to balance it. We discover that two H+ ions are required to balance the charge on the AlCl4- ion after doing this. In addition, water (H2O) and HCl are also produced together with AlCl3. AlCl4-+2H+=AlCl3+H2O+HCl is the reaction's balanced equation. False. Because there are not an equal amount of atoms on both sides, the above equation is unbalanced. AlCl4- + 2H+ = AlCl3 + H2O + HCl is the balanced equation because two H+ ions are required to balance the charge on the AlCl4- ion and because the reaction also yields water and HCl.

learn more about charges here:

https://brainly.com/question/11944606

#SPJ11

According to the Bohr model of the atom, the energies of the electrons around an atom are quantized. The Bohr model, proposed by Niels Bohr in 1913, was an early attempt to describe the structure of atoms.

In this model, an atom consists of a central nucleus surrounded by electrons orbiting in specific energy levels or shells.
Electrons in the Bohrs model can only occupy discrete energy levels, meaning they cannot have just any energy value; instead, their energies are quantized. The quantization of electron energy levels is based on the concept that electrons can only occupy orbits with specific, fixed distances from the nucleus. Each of these orbits corresponds to a specific energy level. Electrons can move between energy levels by absorbing or emitting energy in the form of photons, but they cannot exist in between these quantized energy levels.
The energy levels are often represented by the principal quantum number, n, which is a positive integer (n = 1, 2, 3, etc.). As the value of n increases, the energy of the electron in that orbit also increases, and the electron is found at a greater distance from the nucleus. Consequently, the energy levels get further apart as n increases.

learn more about  Bohrs model Refer: https://brainly.com/question/11299441

#SPJ11

complete question:

According to the Bohr model of the atom, the energies of the electrons around an atom

a, have positive values.

b. are quantized.

c. equal n, the orbit number.

d. are quantificated.

e. get further apart as n increases

Vertical sashes in a fume hood are an important safety feature that help to contain hazardous materials and protect the user. Typically, these sashes should be closed at all times except when certain circumstances arise. For instance, they may need to be opened to measure the airflow of a hood.

Which is essential for ensuring proper ventilation and preventing dangerous buildup of fumes or vapors. Similarly, if there is a need to access equipment inside the hood, the sashes may be opened temporarily. In some cases, if there is a chemical reaction occurring inside the hood, the sashes may need to be opened slightly to allow for proper ventilation. Finally, if there is an expectation of an explosion, the Vertical sashes should be opened to minimize the risk of injury. In general, it is important to follow proper safety procedures and guidelines when working with fume hood to ensure the safety of both the user and the surrounding environment.

learn more about  fume hood Refer: https://brainly.com/question/29582094

#SPJ11

True, An addition polymerization is a process in which monomers containing carbon-carbon double bonds (such as ethene) react with an initiator (such as a radical) to form a polymer with a long chain of repeating units.

In an addition polymerization, two monomers containing double or triple bonds react in the presence of an initiator, which helps initiate the reaction.

                                             The initiator can break the double or triple bonds, allowing the monomers to form new single bonds and create a polymer chain.

Learn more about addition polymerization

brainly.com/question/27354910

#SPJ11

The best method to determine the hydroxide ion concentration of an aqueous solution with legal ramifications would be to use titration with a standardised acid solution.

Titration with a strong acid and a reliable indicator, followed by careful calculations, is the best method to determine hydroxide ion concentration. This method provides high accuracy and precision, allowing you to confidently determine the hydroxide ion concentration in the aqueous solution.This method is highly accurate and provides precise results. It involves adding the acid solution to the solution of unknown hydroxide ion concentration until the equivalence point is reached, which is indicated by a color change in the solution. The amount of acid solution used can then be used to calculate the hydroxide ion concentration of the original solution with high accuracy and without reasonable doubt.

Learn more about hydroxide ion concentration : https://brainly.com/question/28145224

#SPJ11

When a slightly soluble salt dissolves in water, it dissociates into its constituent ions, resulting in an equilibrium reaction. The equilibrium constant for this reaction is known as the solubility product constant, Ksp.

For more such question on Ksp

https://brainly.com/question/29557204

#SPJ11

a.)  The Volume of water displaced is  3 ml

b.)  The final density of the mineral is 4.1 g/ml.

(a) The volume of water displaced is the ratio of the volume containing mineral to the volume excluding mineral.

Volume of water displaced = Volume with mineral - Volume without mineral

Volume of water displaced = 53 ml - 50 ml

Volume of water displaced = 3 ml.

(b) The following formula can be used to determine the mineral's density:

Mass / Volume equals density.

The difference between the mass of the mineral and the mass without the mineral is the mass of the mineral.

Mass of mineral = Mass with mineral - Mass without mineral

Mass of mineral = 12.3 g - 0 g (since the mass without mineral is not given)

Mass of mineral = 12.3 g

By deducting the volume without the mineral from the volume with, one may determine the volume of the mineral.

Volume of mineral = Volume with mineral - Volume without mineral

Volume of mineral = 53 ml - 50 ml

Volume of mineral = 3 ml

Therefore, the density of the mineral is:

Density = Mass of mineral / Volume of mineral

Density = 12.3 g / 3 ml

Density = 4.1 g/ml

Therefore, the final density of the mineral is 4.1 g/ml.

For such more question on Volume:

https://brainly.com/question/29796637

#SPJ11

Answer:

The specific heat of the steel can be calculated using the formula:

Q = mcΔT

where Q is the heat transferred, m is the mass of the steel, c is the specific heat of the steel, and ΔT is the change in temperature.

First, calculate the heat transferred from the steel to the water:

Qsteel = mcΔT = (525 g)(c)(100 °C - 55 °C) = 27675c J

Next, calculate the heat transferred from the water to the steel:

Qwater = mcΔT = (375 g)(4.184 J/g. °C)(55 °C - 25 °C) = 50202 J

Since the heat lost by the steel is equal to the heat gained by the water:

Qsteel = Qwater

27675c J = 50202 J

c = 1.81 J/g. °C

Therefore, the specific heat of the steel is 1.81 J/g. °C.

Explanation:

Answer:

38.89302738712 litres

Explanation:

pv =nRT

V = nRT/p where R is the ideal gas constant R=8.314 J/mol·K

p in atm to p in pascal = x 101325

V = (102)(8.314)(316)/(68 x 101325)

V = 0.03889302739 m3

m3 to l = x 1000

0.03889302739 x 1000

V = 38.89302738712 litres

please mark my answer brainliest

The rate of formation of [tex]H_{2}[/tex] is 0.45 min⁻¹

The balanced chemical equation is:

2 [tex]NH_{3}[/tex]→ [tex]N_{2}[/tex] + 3[tex]H_{2}[/tex]

From the equation, we can see that for every 2 moles of [tex]NH_{3}[/tex] consumed, 3 moles of H2 are formed. Therefore, the ratio of the rate of formation of [tex]H_{2}[/tex]to the rate of consumption of [tex]NH_{3}[/tex] is 3/2.

Given that [tex]NH_{3}[/tex] is being consumed at a rate of 0.30 min⁻¹, the rate of formation of [tex]H_{2}[/tex] can be calculated as follows:

Rate of formation of [tex]H_{2}[/tex] = (3/2) × Rate of consumption of [tex]NH_{3}[/tex]

Rate of formation of [tex]H_{2}[/tex] = (3/2) × 0.30 min⁻¹

Rate of formation of [tex]H_{2}[/tex] = 0.45 min⁻¹

Therefore, the rate of formation of [tex]H_{2}[/tex] is 0.45 min⁻¹

Learn more about chemical equation,

https://brainly.com/question/30087623

#SPJ4

In a single covalent bond, two total electrons are shared.

Two total electrons are shared by one covalent bond. One pair of electrons are shared by two atoms in a single covalent connection.

In order to create a stable electron configuration for both atoms, each atom contributes one electron to create a shared pair.

A single covalent bond involves the sharing of one pair of electrons between two atoms.

Common examples of this kind of link between two nonmetals include the bond between the two hydrogen atoms in a molecule of H2 or the bond between the carbon and oxygen atoms in a molecule of CO.

For such more question on electrons:

https://brainly.com/question/371590

#SPJ11

The statement that is true is that the number of hybrid atomic orbitals made equals the number of standard atomic orbitals used. Hybridization is a process that involves the combination of atomic orbitals to form new hybrid orbitals. The number of hybrid orbitals formed is equal to the number of standard atomic orbitals used in the hybridization process. This is because the new hybrid orbitals are a combination of the original orbitals.

For example, in sp hybridization, one s orbital and one p orbital combine to form two sp hybrid orbitals. In this case, two standard atomic orbitals were used to form two hybrid orbitals. Similarly, in sp2 hybridization, one s orbital and two p orbitals combine to form three sp2 hybrid orbitals. In this case, three standard atomic orbitals were used to form three hybrid orbitals.
Therefore, it can be concluded that the number of standard atomic orbitals used in hybridization is directly related to the number of hybrid orbitals formed. This is an important concept in understanding the geometry and bonding of molecules, and is a fundamental concept in chemistry.

for more such questions on atomic orbitals

https://brainly.com/question/11457131

#SPJ11

In order of increasing orbital energy, this configuration can be expressed in condensed form as follows:

[Ne]3s²3p²

The electron configuration of sulfur is 1s²2s²2p⁶3s²3p⁴.

To express this configuration in condensed form in order of increasing orbital energy, we can group the electrons by the principal energy level (n) and list them in order of increasing sublevel (s, p, d, f):

[Ne]3s²3p²

Here, [Ne] represents the electron configuration of the noble gas neon, whose completely filled 2s and 2p subshells are included in the core electrons of the sulfur atom. The valence electrons of sulfur are located in the 3s and 3p subshells, which have higher energy levels than the core electrons.

Learn more about electronic configuration on:

https://brainly.com/question/17066934

#SPJ11

The molarity of the solution that contains 32.00 g of sodium chloride and 275 g of water is 1.994 M.

To calculate the molarity of a solution, we first need to determine the number of moles of the solute (sodium chloride, NaCl) and the volume of the solution (in liters).

Given; Mass of NaCl = 32.00 g

Mass of water = 275 g

Calculate the number of moles of NaCl.

To find the number of moles of NaCl, we can use its molar mass, which is the sum of the atomic masses of sodium (Na) and chlorine (Cl).

Molar mass of NaCl=Atomic mass of Na + Atomic mass of Cl

= 22.99 g/mol (for Na) + 35.45 g/mol (for Cl)

= 58.44 g/mol

Number of moles of NaCl = Mass of NaCl/Molar mass of NaCl

= 32.00 g / 58.44 g/mol

= 0.5477 mol

Now, we can convert the mass of water to volume in liters.

The mass of water needs to be converted to volume in liters in order to calculate the molarity of the solution. This can be done using the density of water, which is approximately 1 g/mL or 1 g/cm³.

Density of water= 1 g/mL or 1 g/cm³

Mass of water = 275 g

Volume of water = Mass of water/Density of water

= 275 g / 1 g/mL

= 275 mL (since 1 mL = 1 cm³)

Converting mL to L;

Volume of water = 275 mL / 1000 mL/L

= 0.275 L

Now, we can Calculate the molarity of the solution.

Molarity (M) is termed as the number of moles of solute per liter of solution.

Molarity (M) = Number of moles of solute/Volume of solution (in liters)

Plugging in the values;

Molarity (M) = 0.5477 mol / 0.275 L

= 1.994 M

To Know more about molarity here

https://brainly.com/question/8732513

#SPJ1

Answer: Saw

Explanation:

Pretty obvious

Answer:

Which tool likely made these marks?

O hammer

O file

O screwdriver

Explanation:

You're welcome.

The mass of carbon dioxide that should be produced in the reaction is equals to 44.01 g. The maximum Percent yield is 25.8%.

We have a molecule of carbon dioxide. In a reaction between carbon and excess oxygen to form a molecule of carbon dioxide. The reaction [tex]C + O_2 →CO_2[/tex]

Mass of carbon use in reaction =3.74 g

Mass of carbon dioxide that recover

=11.34 g

We have to determine the mass of carbon dioxide. Molar mass of Carbon dioxide= 44.01 g/mol

From the reaction, the one mole of carbon and one mole of oxygen reacts and form one mole of carbon dioxide molecule.

Mass of carbon dioxide = molar mass of carbon dioxide × moles of carbon dioxide

= 44.01 g/mol × 1 mole

= 44.01 g

Now, the maximum recent yield = [tex]\frac{ 11.34}{44.01} [/tex]

= 0.258

Percentage of yield = 25.8%. Hence, required value is 25.8%.

For more information about percent yield, visit:

https://brainly.com/question/14714924

#SPJ4

The volume (in liters) of the the original solution that should be used is 0.578 Liter

The volume of the original solution that should be used can be obtained as follow:

Dilution equation is given as follow:

M₁V₁ = M₂V₂

Inputting the given parameters, we have:

14 × V₁ = 2.3 × 3.5

14 × V₁ = 8.05

Divide bioth sides by 14

V₁ = 8.05 / 14

V₁ = 0.578 Liter

Thus, from the above calculation, we can conclude that the volume of the original solution needed is 0.578 Liter

Learn more about volume:

https://brainly.com/question/24159217

#SPJ1

The number of grams of excess reactant is 1.16 grams of NH₃.

To calculate the number of grams of excess reactant, we first need to determine the limiting reactant, which is the reactant that is completely consumed and determines the amount of product formed. The other reactant is considered the excess reactant.

Given;

Mass of NH₃ = 3.46 g

Mass of HCl = 4.91 g

To determine the limiting reactant, we can compare the moles of each reactant using their respective molar masses.

Molar mass of NH₃ (ammonia) = 17.03 g/mol

Molar mass of HCl (hydrogen chloride) = 36.46 g/mol

Moles of NH₃ = mass of NH₃ / molar mass of NH₃

Moles of HCl = mass of HCl / molar mass of HCl

Plugging in the given values;

Moles of NH₃ = 3.46 g / 17.03 g/mol

= 0.2031 mol

Moles of HCl = 4.91 g / 36.46 g/mol

= 0.1347 mol

To calculate the amount of excess reactant, we subtract the moles of the limiting reactant from the moles of the excess reactant;

Excess moles of NH₃ = Moles of NH₃ - Moles of HCl

Excess moles of NH₃ = 0.2031 mol - 0.1347 mol

= 0.0684 mol

Now, we can calculate the mass of the excess reactant using its molar mass;

Mass of excess NH₃ = Excess moles of NH₃ × molar mass of NH₃

Mass of excess NH₃ = 0.0684 mol × 17.03 g/mol

= 1.16 g

To know more about reactant here

https://brainly.com/question/2948214

#SPJ1

The hydrogen sulfite or bisulfite ion (HSO3-) can act as an acid or a base in water, depending on the solution's pH. When HSO3- is in an acidic solution, it can act as a base and accept a proton to form the sulfurous acid (H2SO3):
HSO3- + H3O+ → H2SO3 + H2O

In this reaction, the HSO3- ion accepts a proton (H+) from the hydronium ion (H3O+) to form the sulfurous acid (H2SO3). The reaction's forward direction can be driven by increasing the acidity of the solution or by adding more H3O+ ions.On the other hand, when HSO3- is in a basic solution, it can act as an acid and donate a proton to form the sulfite ion (SO32-):HSO3- + OH- → SO32- + H2O.In this reaction, the HSO3- ion donates a proton (H+) to the hydroxide ion (OH-) to form the sulfite ion (SO32-). The reaction's forward direction can be driven by increasing the solution's basicity or by adding more OH- ions.It is important to note that HSO3- is a weak acid, and its hydrolysis reaction can be influenced by various factors such as temperature, pressure, and the presence of other ions in the solution. Additionally, HSO3- is a sulfite ion that is commonly found in food and beverage products as a preservative. People who are sensitive to sulfites may experience allergic reactions after consuming foods or drinks that contain them.

Learn more about hydrogen here

https://brainly.com/question/24433860

#SPJ11

a)The balanced equation for the reaction described above is:

2NO(g) + 2CO(g) → N₂(g) + 2CO₂(g)

In this reaction, the carbon in CO is oxidized. We can determine this by analyzing the change in oxidation states.

In the balanced equation for the reaction, nitrogen monoxide (NO) and carbon monoxide (CO) combine to form nitrogen gas (N₂) and carbon dioxide (CO₂), which are both components of unpolluted air.

In the reaction, the carbon in CO is oxidized. This is because the oxidation state of carbon in CO is +2, while in CO₂ it is +4. This means that the carbon has gained two electrons, which is the definition of oxidation. Therefore, the carbon in CO is oxidized in the reaction.

Learn more about CO at https://brainly.com/question/30048336

#SPJ11

Based on their ability to absorb infrared light, chemical compounds may be recognised and described using infrared spectrum and infrared spectroscopy, a potent analytical technique.

IR spectroscopy may be used to validate the creation of acetylsalicylic acid (aspirin) and find any unreacted starting materials (salicylic acid and acetic anhydride) in the aspirin manufacturing process.

The characteristic salicylic acid absorption bands, which include a broad and strong peak in the 3300-2500 cm-1 range due to the O-H stretching vibration and a sharp peak at about 1700 cm-1 due to the C=O stretching vibration of the carboxylic acid group, would be visible in the IR spectrum as evidence of unreacted salicylic acid. Consequently, by contrasting the product's IR spectrum with other IR spectra.

Learn more about infrared spectrum visit: brainly.com/question/14783701

#SPJ4

Approximately 30.9 moles of KClO3 are needed to produce 1039 L of O2 according to the given equation. To determine how many moles of KClO3 are needed to produce 1039 L of O2 according to the equation 2KClO3 → 2KCl(s) + 3O2(g), follow these steps:

Step:1. Determine the stoichiometric ratio between KClO3 and O2 from the balanced equation. In this case, it is 2 moles of KClO3 producing 3 moles of O2.
Step:2. Convert the given volume of O2 (1039 L) to moles using the ideal gas law. Assume standard temperature and pressure (STP) conditions, where 1 mole of any gas occupies 22.4 L.
Moles of O2 = 1039 L / 22.4 L/mol = 46.4 moles (approximately)
Step:3. Using the stoichiometric ratio, calculate the moles of KClO3 needed to produce 46.4 moles of O2.
(2 moles KClO3 / 3 moles O2) x 46.4 moles O2 = 30.9 moles of KClO3 (approximately)

Learn more about KClO3 here, https://brainly.com/question/30662282

#SPJ11

The correct answer is B. The half-life period of a zero order reaction is given by the equation 0.693/[A]k, where [A] is the initial concentration of the reactant and k is the rate constant for the reaction. This equation shows that the half-life period is independent of the initial concentration of the reactant, which is a characteristic of zero order reactions.

For a zero-order reaction, the half-life period is given by the following formula:

Half-life (t½) = [A₀] / 2k

Where:
- t½ is the half-life period
- [A₀] is the initial concentration of reactant A
- k is the rate constant for the reaction

So, the correct answer is:

D. 2[A]₀/k

Learn more about :

zero order reaction : brainly.com/question/30752435

#SPJ11

The reaction is thermodynamically favored because it releases energy, which is indicated by the negative value of the change in enthalpy (∆H) of the reaction. This means that the products have a lower enthalpy than the reactants, making the reaction spontaneous and energetically favorable.

Additionally, the decrease in the disorder or randomness of the system (negative ∆S) is outweighed by the decrease in enthalpy, resulting in a negative change in Gibbs free energy (∆G) and indicating that the reaction will proceed in the forward direction.

To know more about enthalpy, visit: https://brainly.com/question/29741969

#SPJ11

Among the compounds water, 1-butyne, 2-butyne, and ethane, the compounds that are stronger acids than ammonia are water and 1-butyne. This is because water can act as both an acid and a base, while 1-butyne, with its acidic terminal alkyne hydrogen, can donate a proton more readily than ammonia.

Ethane and 2-butyne are not acidic and cannot act as acids. In water, the hydrogen ion (H⁺) is readily released, making it a stronger acid than ammonia. Similarly, 1-butyne has a terminal alkyne group that can release a proton (H⁺) and is therefore a stronger acid than ammonia.

Learn more about stronger acids at https://brainly.com/question/24586675

#SPJ11

Overall, this reaction is important in environmental chemistry as it can be used to remove sulphites from water and other solutions.

The half reaction for the conversion of sulphite to sulfate involves the transfer of two electrons and two hydrogen ions. The half reaction can be represented as follows:
[tex]SO_3^{2-} + 2H^+ + 2e^- -- > SO_4^{2-}[/tex]
This half reaction shows that sulphite ([tex]SO_3^{2-}[/tex]) is oxidized to sulfate ([tex]SO_4^{2-}[/tex]) by losing two electrons and two hydrogen ions. This process can occur in the presence of an oxidizing agent, such as hydrogen peroxide or chlorine. The sulfate ion is the final product of the reaction and the sulfur dioxide molecule is released as a gas into the atmosphere.

To learn more about sulfate click here https://brainly.com/question/4117459

#SPJ11

The reduction reaction that occurs in an electrochemical reaction involves the gain of electrons and occurs at the cathode. Therefore, the correct answer is option D, II and IV only.

The reduction reaction in an electrochemical reaction involves the gain of electrons, which means that option IV is correct. The reduction reaction occurs at the cathode, where the positively charged ions are attracted to the negatively charged electrode and gain electrons. At the same time, oxidation occurs at the anode, where the negatively charged ions are attracted to the positively charged electrode and lose electrons. Therefore, option II is also correct. Options I and III are incorrect because reduction does not occur at the anode and it involves the gain, not the loss of electrons.

Learn More about  electrochemical reaction here :-

https://brainly.com/question/31606417

#SPJ11