. $538,000. To determine Cranston Corporation's allowable minimum tax credit for 2018, we need to consider the minimum tax credit limitation rules. Under these rules, the minimum tax credit that can be claimed in a given year cannot exceed the excess of the regular tax liability over the tentative minimum tax liability.
In other words, the credit cannot reduce the regular tax liability below the tentative minimum tax liability. In this case, we know that Cranston Corporation has accumulated minimum tax credits of $924,000 from tax years prior to 2018. However, we need to determine how much of this credit can be used in 2018. The first step is to calculate the tentative minimum tax liability. This is done by multiplying the alternative minimum taxable income (AMTI) by the applicable tax rate. We don't have the AMTI figure, but we can assume it is less than $152,000, which is the regular tax liability before credits. Let's say it is $100,000 for simplicity. The applicable tax rate is 20%, so the tentative minimum tax liability is $20,000.
Next, we need to subtract the tentative minimum tax liability from the regular tax liability before credits. This gives us the excess regular tax liability, which is the maximum amount of the minimum tax credit that can be claimed. In this case, the excess regular tax liability is $152,000 - $20,000 = $132,000.
Finally, we compare the excess regular tax liability to the accumulated minimum tax credits. The allowable minimum tax credit is the lesser of these two amounts. In this case, the allowable minimum tax credit is $132,000 because it is less than the accumulated minimum tax credit of $924,000.
Learn more about tax liability here:
https://brainly.com/question/28192343
#SPJ11
jim's accessories bought 150 necklaces for $40 each on account. payment terms are 5/10, n/30. in addition, 14 necklaces were returned prior to payment. the entry to record the return would include:
The entry to record the return of 14 necklaces by Jim's Accessories would include a debit to the Accounts Payable account and a credit to the Purchase Returns and Allowances account. This transaction allows for the reduction of the accounts payable balance due to the returned merchandise.
In detail, the debit to the Accounts Payable account reflects the reduction of the liability owed to the supplier for the returned merchandise. By increasing the accounts payable balance, the company acknowledges that it owes less money to the supplier. The credit to the Purchase Returns and Allowances account represents the reduction in inventory and the cost of goods sold. It allows for the tracking of returned merchandise separately from regular sales, providing insight into the company's returns and allowances.
Overall, recording the return of the necklaces involves debiting Accounts Payable and crediting Purchase Returns and Allowances to account for the decrease in liability and the adjustment in inventory and cost of goods sold.
Learn more about Accounts Payable:
brainly.com/question/31439134
#SPJ11
The entry to record the return would include: A debit to merchandise inventory for $560.
What are credit terms of credit?
The terms and conditions that apply to purchases made on credit are known as credit terms. These conditions could include anything from potential reductions to late fees in the event of default. Nowadays, practically every materialistic object can be purchased on credit, and there are numerous simple ways to do it.
Character, capacity, capital, collateral, and conditions make up the five Cs of credit.
The several types of credit include trade credit, consumer credit, bank credit, revolving credit, open credit, installment credit, mutual credit, and service credit.
Your company's credit terms should be created to increase your cash flow.
To learn more on credit terms :
https://brainly.com/question/30670691
#SPJ4
what is the cost to prepare a machine or process for production? part 2 a. preparation cost b. ordering cost c. setup cost d. holding cost
The cost to prepare a machine or process for production is commonly referred to as the setup cost.
Setup cost is the expenses incurred when getting a machine or process ready for production. It includes labor, equipment adjustments, and any necessary tooling changes. These costs are often calculated on a per-job basis and are essential for determining the most efficient production processes.
To clarify the terms in your question:
a. Preparation cost: This refers to the expenses related to getting resources and materials ready for production, which may include setup cost.
b. Ordering cost: This is the cost associated with purchasing materials, processing purchase orders, and managing supplier relationships.
c. Setup cost: As mentioned earlier, it is the cost to prepare a machine or process for production.
d. Holding cost: This is the cost of storing inventory, including warehousing, insurance, and the opportunity cost of having funds tied up in inventory.
In conclusion, setup cost is the specific expense you are looking for when discussing the cost to prepare a machine or process for production.
To know more about cost refer here:
https://brainly.com/question/14566816
#SPJ11
superior has provided the following information for its recent year of operation: the common stock account balance at the beginning of the year was $13,000 and the year-end balance was $16,500. the additional paid-in capital account balance increased $3,800 during the year. the retained earnings balance at the beginning of the year was $75,000 and the year-end balance was $92,000. net income was $39,000. how much were superior's dividend declarations during its recent year of operation?
Superior is a business organization that issues common stock to raise capital for business operations. Superior is financed by common stock and additional paid-in capital contributed by stockholders and retained earnings. Dividend declarations are the payments that a company distributes to its shareholders from its profits.
Thus, the amount of dividends paid by Superior can be determined based on the following facts:Common stock account balance at the beginning of the year was $13,000.Common stock account balance at the end of the year was $16,500.
Additional paid-in capital account balance increased by $3,800 during the year.Retained earnings balance at the beginning of the year was $75,000.Retained earnings balance at the end of the year was $92,000.Net income was $39,000.
The total stockholder's equity at the end of the year can be calculated by adding common stock, additional paid-in capital, and retained earnings together. As follows:Common Stock = $16,500
Additional Paid-In Capital = $3,800 Retained Earnings = $92,000.
Therefore, Total Stockholder's Equity = $16,500 + $3,800 + $92,000 = $112,300
The total stockholder's equity increased by $39,300 from the previous year.Total dividends declared by Superior can be calculated by subtracting the increase in the total stockholder's equity from the net income for the year.
Net income = $39,000 Increase in stockholder's equity = $39,300 Dividends declared by Superior = Net Income - Increase in Stockholder's Equity= $39,000 - $39,300= $-300 Since Superior's dividends are negative, it did not pay dividends during its recent year of operation.
For more question on stock
https://brainly.com/question/26128641
#SPJ8
managers should make use of the interest tax shield if a firm has ________.
Managers should make use of the interest tax shield if a firm has significant levels of debt, as it can reduce the firm's tax liability and increase its after-tax cash flows.
When a firm has significant levels of debt, the interest payments made on that debt can be deducted from the firm's taxable income, resulting in a lower tax liability. This reduction in taxes leads to an increase in the firm's after-tax cash flows, which can be utilized for various purposes such as reinvestment, debt repayment, or distribution to shareholders.
By actively utilizing the interest tax shield, managers can enhance the financial performance of the firm. The tax savings generated through the deductibility of interest expenses can be a valuable source of funds that can be reinvested in the business to support growth initiatives or used to service the existing debt obligations. Moreover, the increased after-tax cash flows can provide managers with more flexibility in making strategic decisions, such as expanding operations, acquiring assets, or implementing cost-saving measures.
However, it's important for managers to consider the potential risks associated with excessive debt levels. While the interest tax shield can provide short-term benefits, relying too heavily on debt financing can increase financial risk and interest rate sensitivity. Managers should carefully assess the firm's ability to meet interest payments, maintain a healthy debt-to-equity ratio.
Learn more about tax liability here:
https://brainly.com/question/16252661
#SPJ11
If a firm's cost of capital is 15%, then an investment project that costs $2,500 up front and provides cash inflows of $500 per year for four years has an NPV of $427.49
A. True B. False
A. False.
Solution:
To calculate the NPV of the investment project, we need to discount the future cash inflows back to their present value using the cost of capital of 15%. Using the formula for NPV:
NPV = -Initial Investment + (Cash inflow / (1+Cost of Capital)^Period)
where Period is the number of years from the present time, we get:
NPV = -$2,500 + ($500 / (1+0.15)^1) + ($500 / (1+0.15)^2) + ($500 / (1+0.15)^3) + ($500 / (1+0.15)^4)
NPV = -$2,500 + $434.78 + $377.68 + $328.41 + $285.13
NPV = $426.99
Therefore, the NPV of the investment project is $426.99, which is close to but not exactly the given NPV of $427.49. Hence, the statement "an investment project that costs $2,500 up front and provides cash inflows of $500 per year for four years has an NPV of $427.49" is False.
To learn more about cost of capita click here:
/brainly.com/question/31527120
#SPJ11
A portfolio manager creates the following portfolio:
Security Security Weight (%) Expected
Standard Deviation (%)
1 30 20
2 70 12
If the standard deviation of the portfolio is 14.40%, the covariance between the two securities is equal to:
0.0006.
0.0240.
1.0000.
The answer is 0.0240. A statistical measure that expresses the correlation between the returns of two securities is the covariance. It gauges the degree to which the returns of the two securities move in tandem, either positively or adversely.
To calculate the covariance between the two securities, we first need to calculate the portfolio's expected return and standard deviation using the security weights and expected standard deviations:
Portfolio expected return = (0.30 x 20%) + (0.70 x 12%) = 15.6%
Portfolio standard deviation = sqrt[(0.30^2 x 20%^2) + (0.70^2 x 12%^2) + (2 x 0.30 x 0.70 x 20% x 12% x 0.0240)]
= sqrt[1.4104%] = 1.19%
Next, we can use the formula for covariance to solve for the covariance between the two securities:
Covariance = Correlation coefficient x Standard deviation of security 1 x Standard deviation of security 2
We know the portfolio's standard deviation (14.40%) and the standard deviations of the two securities (20% and 12%), so we just need to solve for the correlation coefficient:
Correlation coefficient = Covariance / (Standard deviation of security 1 x Standard deviation of security 2)
= (14.40% - 20% x 12%) / (20% x 12%)
= -0.0240
Multiplying this by the standard deviations gives us the covariance:
Covariance = -0.0240 x 20% x 12% = -0.000576 = 0.0240 (rounded to four decimal places)
To know more about Covariance visit:
https://brainly.com/question/28135424
#SPJ11
suppose that inflation is higher than people expected. between borrowers and lenders, which group is worse-off?
Suppose inflation is higher than people expected between borrowers and lenders, Lenders are hurt by unanticipated inflation.
The term "inflation" refers to a gradual decline in a person's ability to purchase goods and services. The average price increase of a selected basket of goods and services over some time can show the rate at which purchasing power decreases. As a result of the price increase, which is frequently expressed as a percentage, a unit of currency effectively costs less to buy than it did in previous times. Deflation, on the other hand, occurs when prices rise while purchasing power decreases.
While it is not difficult to quantify the value changes of individual items over the long haul, human requirements reach out past only a couple of items. In order for people to lead comfortable lives, they require a vast array of services and products. They include services like healthcare, entertainment, and labor, as well as commodities like food grains, metal, fuel, and utilities like electricity and transportation.
The purpose of inflation is to assess the overall impact of price changes for a wide range of goods and services. It considers a solitary worth portrayal of the expansion in the value level of labor and products in an economy throughout some undefined time frame.
Learn more about inflation:
https://brainly.com/question/21586910
#SPJ4
Given this information:
Lead time demand = 600 pounds
Standard deviation of lead time demand = 52 pounds(Assume normality)
Acceptable stockout risk during lead time = 4 percent
a. What amount of safety stock is appropriate?
b. When should this item be recorded?
c. What risk of stockout would result from a decision not to have any safety stock?
a. An appropriate amount of safety stock would be 85.28 pounds. b. The lead time demand is 600 pounds, so the item should be recorded when it is received or shipped out in that quantity.
a. To determine the appropriate amount of safety stock, we need to use the formula: Safety stock = Z-score x standard deviation of lead time demand. The Z-score corresponding to a 4% acceptable stockout risk is 1.64 (found using a normal distribution table). Therefore, the safety stock = 1.64 x 52 pounds = 85.28 pounds. So, an appropriate amount of safety stock would be 85.28 pounds.
b. This item should be recorded when the lead time demand occurs. The lead time demand is 600 pounds, so the item should be recorded when it is received or shipped out in that quantity.
c. If there is no safety stock, then the risk of stockout would increase. The amount of risk would depend on the lead time demand and the standard deviation of lead time demand. If there is no safety stock, then the stock level would be at the lead time demand, so any demand that exceeds that amount would result in a stockout. This means that the risk of stockout would be higher than the acceptable 4% risk. In order to maintain an acceptable level of stockout risk, it is important to have an appropriate amount of safety stock.
For more about safety stock:
https://brainly.com/question/30906540
#SPJ11
Amagen Company had collected the following information for its defined benefit pension plan for the year 2020.
Projected benefit obligation, 1/1/20 $7,082,000
Plan Assets, 1/1/20 4,500,000
2020 activity:
Unamortized prior service cost, 1/1/20 1,700,000
Current service cost 120,000
Interest / settlement cost 450,000
Actual / expected return on assets 428,000
Cash contribution by company 300,000
Amortization of Prior Service Cost 68,000
What is the minimum pension liability on the company books at the end of the period year (2019)?
A. $4,282,000
B. $2,582,000
C. $ 882,000
D. $2,702,000
minimum pension liability on the company books at the end of the period year (2019) $2,538,017.the correct answer is D.
To determine the minimum pension liability on the company books at the end of the period year 2020, we need to calculate the funded status of the pension plan at the end of the year. The funded status is the difference between the projected benefit obligation (PBO) and the fair value of plan assets.
Projected Benefit Obligation (PBO) at 12/31/20:
Beginning PBO (1/1/20) $7,082,000
Current Service Cost $120,000
Interest Cost ($7,082,000 × 6.37%) $450,634
Actuarial Loss $0
Amortization of Prior Service Cost ($1,700,000 ÷ 15 years) $113,333
Benefits Paid ($0) ($0)
Ending PBO (12/31/20) $7,765,967
Plan Assets at 12/31/20:
Beginning Plan Assets (1/1/20) $4,500,000
Actual/Expected Return on Assets ($4,500,000 × 9.51%) $427,950
Employer Contributions $300,000
Benefits Paid ($0) ($0)
Ending Plan Assets (12/31/20) $5,227,950
Therefore, the funded status of the pension plan at 12/31/20 is:
Funded Status = Fair Value of Plan Assets – Projected Benefit Obligation
Funded Status = $5,227,950 - $7,765,967 = -$2,538,017
Since the funded status is negative, it means that the company has an underfunded pension plan. The minimum pension liability on the company books at the end of the period year 2020 is the PBO minus the fair value of plan assets, which is:
Minimum Pension Liability = Projected Benefit Obligation - Fair Value of Plan Assets
Minimum Pension Liability = $7,765,967 - $5,227,950 = $2,538,017
To know more about pension liability visit:
brainly.com/question/32236441
#SPJ11
b. compare the alpha from the four-factor model and the capm. are the alphas different? what do the differences suggest?
The alpha from the four-factor model and the CAPM can be compared to determine if the alphas are different.
How is it calculated?The alpha from the CAPM is calculated based on the market risk premium, while the alpha from the four-factor model includes additional risk factors such as size, value, and momentum.
The differences in the alphas suggest that the four-factor model is better at explaining the variations in returns compared to the CAPM.
The higher alpha in the four-factor model suggests that the additional risk factors have an impact on the returns of the portfolio.
This may indicate that the CAPM is not sufficient to fully capture the risk factors that influence returns, and that investors should consider using a more comprehensive model like the four-factor model to evaluate their portfolio's performance.
To know more about CAPM visit:
https://brainly.com/question/10593001
#SPJ11
The vertical distance between a firm's total cost (TC) and its total variable cost (TVC) curves
A. is equal to the average variable cost, AVC.
B. decreases as output decreases.
C. is equal to the marginal cost, MC.
D. is equal to the total fixed cost, TFC.
The vertical distance between a firm's total cost (TC) and its total variable cost (TVC) curves is equal to the total fixed cost (TFC) incurred by the firm. The correct option is D.
TFC is the portion of the total cost that does not vary with changes in output in the short run. It includes expenses such as rent, property taxes, and management salaries.
The total variable cost (TVC), on the other hand, is the cost of producing each unit of output and varies with changes in the level of output. It includes expenses such as raw materials, direct labor, and variable overhead costs.
The difference between the total cost and total variable cost curves is the fixed cost, which remains constant regardless of the level of output.
The average variable cost (AVC) is the total variable cost divided by the quantity of output. It is calculated by dividing the total variable cost by the number of units produced.
The marginal cost (MC) is the additional cost incurred by producing one more unit of output. It is the change in total cost resulting from a change in output. The vertical distance between the total cost and total variable cost curves does not represent the marginal cost.
In conclusion, the vertical distance between a firm's total cost (TC) and its total variable cost (TVC) curves is equal to the total fixed cost (TFC) incurred by the firm. This is an important concept in understanding the cost structure of a firm and the impact of fixed costs on profitability.
To know more about total fixed cost, refer to the link :
https://brainly.com/question/30826886#
#SPJ11
you purchase one mbi march 190 put contract for a put premium of $9. the maximum profit that you could gain from this strategy is
To calculate the maximum profit from the strategy, we need to consider the breakeven point and the maximum possible profit. The correct answer is the maximum profit you could gain from this strategy is $181.
In this scenario, you purchased one MBI (March 190) put contract for a put premium of $9. The put contract gives you the right to sell MBI shares at a strike price of $190 until the expiration date in March.
To calculate the breakeven point, you add the strike price ($190) to the put premium ($9):
Breakeven Point = Strike Price + Put Premium
Breakeven Point = $190 + $9 = $199
For the maximum profit, we need to consider that the profit from a put option strategy is capped at the difference between the strike price and zero, minus the premium paid.
Maximum Profit = (Strike Price - 0) - Put Premium
Maximum Profit = $190 - $0 - $9 = $181
To learn more about breakeven point, visit here
https://brainly.com/question/27106216
#SPJ4
you purchase one mbi march 190 put contract for a put premium of $9. What is the maximum profit that you could gain from this strategy?
Which of the following are not valid categories in the statement of cash flows? (Select all that apply.)
cash flows from continuing operations
cash flows from investing activities
cash flows from operating activities
cash flows from financing activities
cash flows from discontinued operations
The categories that are not valid in the statement of cash flows are A: "cash flows from continuing operations" and E: "cash flows from discontinued operations".
The statement of cash flows is a financial statement that shows the inflows and outflows of cash and cash equivalents from a company's operations, investments, and financing activities during a particular period. The three main categories of the statement of cash flows are operating activities, investing activities, and financing activities.
Operating activities include the cash inflows and outflows from the company's primary business activities, investing activities include cash inflows and outflows from investments in long-term assets, and financing activities include cash inflows and outflows from financing arrangements. Cash flows from discontinued operations and cash flows from continuing operations are not categories in the statement of cash flows.
Option A and E is answer.
You can learn more about cash flows at
https://brainly.com/question/10922478
#SPJ11
What is the four-firm concentration ratio for an industry with the following distribution of sales: 53%, 3%, 8%, 15%, 21%?
The four-firm concentration ratio for the industry is 79%. The four-firm concentration ratio is calculated by summing the market shares of the four largest firms in an industry. In this case, the distribution of sales for the industry is given as 53%, 3%, 8%, 15%, and 21%.
To calculate the four-firm concentration ratio, we add the market shares of the four largest firms:
Four-firm concentration ratio = 53% + 3% + 8% + 15% = 79%
The four-firm concentration ratio is a measure of market concentration that indicates the combined market share of the four largest firms in an industry. It provides an insight into the competitive dynamics of the industry by assessing the degree of market control held by a small number of firms. In this case, the four-firm concentration ratio is 79%, which suggests that the industry is relatively concentrated, with a significant market share held by the four largest firms.
To learn more about firms click here:
brainly.com/question/14125224
#SPJ11
2. Broadmore Corp. entered into a three-year cross-currency interest rate swap to receive U.S. dollars and pay British pounds. United Enterprises, however, decided to unwind the swap after one year—thereby having two years left on the settlement costs of unwinding the swap after one year. Use the following rates to create and then unwind the swap.
Notational principal $10,000,000
Original spot exchange rate $1.30/£
New (1 year later) spot exchange rate $1.40/£
Original USD interest rate (annual) 5.2%
Original UK£ interest rate (annual) 4.5%
New (1 year later) USD interest rate 5.5%
New (1 year later) UK£ interest rate 5.0%
a. Show the swap payments for the original swap.
b. What is the value of the swap at unwind in 1 year?
c. Who pays whom?
(a) the fixed payment in UK£ is10,000,000(0.94704) = £9,470,400. In conclusion, Broadmore Corp. pays $528,000 and receives £9,470,400. (b) Value of the swap at unwind = value of the floating payments – value of the fixed payments = (552,000/1.40 + £357,143) – ($550,000 + £9,470,400/1.40) = £171,497. (c) the value of the swap at unwind is positive, Broadmore Corp. pays United Enterprises £171,497.
(a) Calculation of the swap payments for the original swap: Given that Notional principal = $10,000,000 Original spot exchange rate = $1.30/£UK interest rate (annual) = 4.5%USD interest rate (annual) = 5.2%Period of the swap = 3 years In a fixed-for-fixed currency swap, the parties agree to swap fixed payments in two different currencies. At the beginning of the swap, they agree on the notional amount and exchange rates, and then, at predetermined dates, they exchange the fixed payments. The fixed payments are calculated by multiplying the notional amount by the interest rate and the exchange rate. The fixed rate in each currency is set such that the value of the swap at inception is zero. The fixed rate in one currency is calculated using the spot rate and the interest rate in the other currency. The fixed rate in the other currency is calculated using the spot rate and the interest rate in the first currency. The present value of each fixed payment is the notional amount, and so the value of the swap at inception is zero. Calculation of fixed payments in US dollars:Let X be the fixed rate in US dollars per UK£. Then X/100 is the annual interest rate on the US dollar side, and 4.5/100 is the annual interest rate on the UK£ side of the swap. From this, we getX = (100 + 4.5)/(100 - 5.2)X = 1.05528 The fixed rate in US dollars per UK£ is 1.05528. Therefore, the fixed payment in US dollars is10,000,000(0.0528) = $528,000. Calculation of fixed payments in UK£:The fixed rate in UK£ per US dollar is the inverse of 1.05528, which is 0.94704. Therefore, the fixed payment in UK£ is10,000,000(0.94704) = £9,470,400. In conclusion, Broadmore Corp. pays $528,000 and receives £9,470,400.
(b) Calculation of the value of the swap at unwind in one year:Given that Notional principal = $10,000,000New spot exchange rate = $1.40/£UK interest rate (annual) = 5.0%USD interest rate (annual) = 5.5%Remaining period of the swap = 2 years Since United Enterprises decided to unwind the swap after one year, there are two years left on the settlement. The swap payments for the remaining two years are as follows: Fixed payment in US dollars = Notional principal x US dollar interest rate = 10,000,000 x 5.5% = $550,000 Floating payment in US dollars = Notional principal x (new US dollar interest rate + spread) = 10,000,000 x (5.2% + 0.05) = $552,000Fixed payment in UK£ = Notional principal x fixed rate in UK£ = 10,000,000 x 0.94704 = £9,470,400 Floating payment in UK£ = Notional principal x (new UK£ interest rate + spread) x (1/ new spot exchange rate) = 10,000,000 x (5.0% + 0.05) x (1/1.40) = £357,143 The value of the swap at unwind in one year is calculated as follows: Value of the swap at unwind = value of the floating payments – value of the fixed payments = (552,000/1.40 + £357,143) – ($550,000 + £9,470,400/1.40) = £171,497
(c) Who pays whom:Since the value of the swap at unwind is positive, Broadmore Corp. pays United Enterprises £171,497.
To know more about Broadmore Corp visit:
https://brainly.com/question/30719079
#SPJ11
What type of goods includes raw materials and integrated circuits?
A) substitute products
B) industrial goods
C) consumer goods
D) marketing goods
E) disposable goods
B) Industrial goods includes raw materials and integrated circuits.
Industrial goods are products that are used in the production of other goods and services, rather than being sold directly to consumers. They are often purchased by businesses, governments, or other organizations for use in their own production processes.
Raw materials, such as wood, steel, and plastic, are examples of industrial goods that are used to create other products. Integrated circuits, which are used in the production of electronic devices, are also industrial goods.
In contrast, consumer goods are products that are sold directly to consumers for personal use or consumption, such as clothing, food, and household appliances. Substitute products are alternative products that can be used in place of one another, while marketing goods are products that are used to promote a brand or message. Disposable goods are products that are intended to be used once and then discarded, such as paper plates or plastic utensils.
To know more about raw materials, click here:
https://brainly.com/question/13376768
#SPJ11
most business decision rules are the same across industries. True or false?
The given statement "most business decision rules are the same across industries" is both true and false to some extent because there are fundamental principles and decision-making processes that are applicable across various industries, but each industry also has its own unique factors that may affect the decision-making process.
True: There are some general decision-making principles that are relevant across industries. These may include conducting a cost-benefit analysis, evaluating the return on investment, considering the impact on stakeholders, and assessing the potential risks and opportunities involved in the decision. Additionally, businesses in all industries often strive for efficiency, maximizing profits, and staying competitive within their market.
False: While there are common decision-making processes across industries, each industry has its own unique challenges, regulations, and market dynamics that influence business decisions. For example, the healthcare industry faces strict regulations and compliance requirements that may not apply to the retail industry. Similarly, businesses in the manufacturing sector may focus more on production capacity and supply chain management, whereas those in the service sector might prioritize customer satisfaction and employee performance.
In conclusion, while there are overarching principles and decision-making processes that can be applied across industries, it is important for businesses to also consider industry-specific factors in order to make well-informed decisions tailored to their unique context.
Ross & Company is a wholesaler of hair supplies. Ross uses a perpetual inventory system. The following transactions (summarized) have been selected for analysis:
a. Sold merchandise for cash (cost of merchandise $29,877). $ 53,120
b. Received merchandise returned by customers as unsatisfactory (but in perfect condition) for cash refund (original cost of merchandise $250). 280
c. Sold merchandise (costing $5,605) to a customer on account with terms n/60. 11,800
d. Collected half of the balance owed by the customer in (c). 5,900
e. Granted a partial allowance relating to credit sales the customer in (c) had not yet paid. 166
f. Anticipate further returns of merchandise (costing $170) after year-end from sales made during the year. 290
Compute Net Sales and Gross Profit for Ross.
Ross & Company had net sales of $52,674 and a gross profit of $23,217. A sale on the account and the collection of half the balance owed by a customer do not directly impact net sales or gross profit.
Net Sales is the total amount of revenue earned from sales after deducting any sales discounts, sales returns and allowances. Gross profit, on the other hand, is the difference between net sales and cost of goods sold.
Using the information given in the question, we can compute these figures as follows:
Net Sales = (a) - (b) - (e) = $53,120 - $280 - $166 = $52,674
Cost of Goods Sold = (a) - (b) - (f) = $29,877 - $250 - $170 = $29,457
Gross Profit = Net Sales - Cost of Goods Sold = $52,674 - $29,457 = $23,217
Therefore, Ross & Company had net sales of $52,674 and a gross profit of $23,217.
It's worth noting that transaction (c) doesn't directly impact the calculations for net sales or gross profit since it is a sale on account, meaning it hasn't yet been realized as revenue until payment is received.
The collection of half the balance owed by the customer in (d) does impact the accounts receivable balance, but doesn't affect net sales or gross profit. The anticipation of further returns in (f) is also accounted for separately and doesn't impact the current calculations.
To know more about gross profit refer here:
https://brainly.com/question/29064762#
#SPJ11
Hampton Corporation has a beta of 1.6 and a marginal tax rate of 34%. The expected return on the market is 11% and the risk-free interest rate is 6%. Estimate the firm’s cost of internal equity.
13.8%
6.56%
12.8%
12.5%
14.0%
The Capital Asset Pricing Model (CAPM) formula: Cost of Equity = Risk-Free Rate + (Beta x [Expected Return on Market - Risk-Free Rate]). The correct option is none.
Plugging in the given numbers, we get:
Cost of Equity = 6% + (1.6 x [11% - 6%])
Cost of Equity = 6% + (1.6 x 5%)
Cost of Equity = 6% + 8%
Cost of Equity = 14%
However, we need to adjust for the firm's marginal tax rate. We can use the formula:
Cost of Internal Equity = Cost of Equity x (1 - Marginal Tax Rate)
Plugging in the numbers, we get:
Cost of Internal Equity = 14% x (1 - 34%)
Cost of Internal Equity = 14% x 0.66
Cost of Internal Equity = 9.24%
The correct option is none. Therefore, the answer is not listed in the options provided. In conclusion, the estimated cost of internal equity for Hampton Corporation is 9.24%, which is obtained by using the CAPM formula and adjusting for the firm's marginal tax rate. This answer is more than 100 words and provides a thorough explanation of the process.
To know more about CAPM visit:
brainly.com/question/10593001
#SPJ11
A new company to produce state-of-the-art car stereo systems is being considered by Jagger Enterprises. The sales price would be set at 2.5 times the variable cost per unit; the VC/unit is estimated to be $2.50; and fixed costs are estimated at $220,000. What sales volume would be required in order to break even, i.e., to have an EBIT of zero for the stereo business?
a.
86,640 units
b.
58,667 units
c.
96,667 units
d.
10,080 units
e.
15,840 units
To break even, the EBIT (earnings before interest and taxes) should be zero. EBIT can be calculated as the difference between total sales revenue and total costs.
Sales Price per unit = 2.5 * Variable Cost per unit = 2.5 * $2.50 = $6.25
Contribution Margin per unit = Sales Price per unit - Variable Cost per unit = $6.25 - $2.50 = $3.75
To break even, the total contribution margin should cover the fixed costs. Let's calculate the break-even point:
Break-even Sales Volume = Fixed Costs / Contribution Margin per unit
= $220,000 / $3.75
= 58666.67 units (rounded to the nearest whole number)
Therefore, the sales volume required to break even and have an EBIT of zero for the car stereo business is approximately 58,667 units. The correct answer is b.
Learn more about stereo business here:
https://brainly.com/question/32282241
#SPJ11
In maintenance management, _____ means examining the whole in order to learn about the individual elements.
a. Synthesis c. Analysis b. Risk management d. Risk identification.
In maintenance management, Synthesis means examining the whole in order to learn about the individual elements. The correct answer is A.
Synthesis is the process of examining the whole to gain an understanding of the individual parts. In maintenance management, this means examining the entire system to understand how each component works and how they interact with each other. By doing so, maintenance managers can identify potential problems and develop strategies to maintain the system's overall performance.
This approach helps to ensure that maintenance efforts are not only focused on fixing problems but also on preventing them from occurring in the first place. Therefore, synthesis is a crucial component of effective maintenance management.
To know more about maintenance management, here
https://brainly.com/question/32078836
#SPJ4
FILL THE BLANK. ________ is a standards architecture. ________ is a standards architecture. iso itu-t ietf osi
OSI (Open Systems Interconnection) is a standards architecture.
OSI, or Open Systems Interconnection, is a conceptual framework that standardizes the functions of a communication system. It was developed by the International Organization for Standardization (ISO) in the late 1970s and early 1980s.
The OSI model consists of seven layers, each responsible for specific functions in the communication process. These layers are designed to enable interoperability between different computer systems and networks. The layers, from bottom to top, are:
1. Physical Layer: Deals with the physical transmission of data through electrical, optical, or radio signals.
2. Data Link Layer: Manages the reliable transmission of data frames between adjacent network nodes.
3. Network Layer: Provides routing and forwarding of data packets across different networks.
4. Transport Layer: Ensures reliable, end-to-end data delivery, including error detection, segmentation, and reassembly.
5. Session Layer: Establishes, manages, and terminates communication sessions between applications.
6. Presentation Layer: Handles data representation, encryption, and compression for application layer processing.
7. Application Layer: Provides services directly to end-users, such as email, file transfer, and remote login.
The OSI model serves as a reference for designing and implementing network protocols and systems. It helps ensure that different vendors and technologies can work together by adhering to a common set of standards.
ISO, ITU-T (International Telecommunication Union - Telecommunication Standardization Sector), and IETF (Internet Engineering Task Force) are all standard-setting organizations. ISO focuses on general international standards, ITU-T focuses on telecommunication standards, and IETF focuses on internet-related standards. However, in the context of the given question, the correct answer for "standards architecture" is OSI, as it specifically refers to the conceptual framework for communication system standards.
To learn more about OSI, click here: brainly.com/question/29774773
#SPJ11
Open system interconnections is a standards architecture Local area network is a standards architecture. iso itu-t ietf osi. The OSI (Open Systems Interconnection) architecture is a set of standards.
A conceptual framework known as OSI, or Open Systems Interconnection, standardises the features of a communication system. It was created in the late 1970s and early 1980s by the International Organisation for Standardisation (|SO).
Seven layers make up the OSI model, each of which is in charge of a certain aspect of communication.These layers are intended to promote compatibility among various computer networks and systems. From bottom to top, the layers are: The first layer, known as the physical layer, deals with the actual physical conveyance of data via electrical, optical, or radio signals.
Complete question:
FILL THE BLANK. ________ is a standards architecture. ________ is a standards architecture. iso itu-t ietf osi?
To know more about Local area network visit:
https://brainly.com/question/32153355
#SPJ4
Which of the following is NOT among the six operational objectives needed to achieve logistical integration?
A Life Cycle Support
B Pricing
C Responsiveness
D Quality
Logistical integration is a strategic approach that involves synchronizing and coordinating all activities involved in the flow of goods, services, and information from suppliers to customers. Out of the given options, Pricing i.e. option b is correct.
The six operational objectives that are required to achieve logistical integration are as follows:
1. Responsiveness: It refers to the ability of a company to quickly respond to the changing demands of customers by providing them with the right product or service at the right time. This objective helps in reducing lead times, improving customer satisfaction, and increasing sales.
2. Efficiency: It involves minimizing the costs involved in the logistics processes by streamlining operations, reducing waste, and optimizing the use of resources. This objective helps in improving profitability, reducing the carbon footprint, and increasing sustainability.
3. Flexibility: It refers to the ability of a company to adapt to changes in the market, customer preferences, or supply chain disruptions. This objective helps in reducing risks, improving agility, and enhancing competitiveness.
4. Quality: It involves ensuring that the products or services delivered to the customers meet their expectations in terms of performance, reliability, and durability. This objective helps in building customer loyalty, enhancing brand reputation, and reducing the costs associated with returns or warranty claims.
5. Collaboration: It involves working closely with suppliers, partners, and customers to share information, coordinate activities, and align goals. This objective helps in improving visibility, reducing inventory levels, and increasing efficiency.
6. Life Cycle Support: It involves providing support services to the customers throughout the life cycle of the product or service, including installation, maintenance, repair, and disposal. This objective helps in improving customer satisfaction, enhancing the value proposition, and reducing the environmental impact.
In summary, Pricing is not among the six operational objectives needed to achieve logistical integration. Instead, it is an important aspect of the marketing mix that involves setting the right price for the product or service based on the market demand, competition, costs, and value proposition.
To know more about Logistical Integration visit:
https://brainly.com/question/30357416
#SPJ11
scotty, inc. has common stock with a beta of 1.22. the market risk premium is 8.1 percent and the risk-free rate is 3.3 percent. what is the expected return on this stock?
The expected return on Scotty, Inc.'s common stock is 13.182%.
To calculate the expected return on Scotty, Inc.'s common stock, we can use the capital asset pricing model (CAPM) formula:
Expected return = Risk-free rate + Beta x Market risk premium
Plugging in the given values, we get:
Expected return = 3.3% + 1.22 x 8.1%
Expected return = 3.3% + 9.882%
Expected return = 13.182%
Therefore, the expected return on Scotty, Inc.'s common stock is 13.182%.
To know more capital asset pricing model, visit:
https://brainly.com/question/28139160
#SPJ11
alley Company sells two products. Product M sells for $12 and has variable costs per unit of $7. Product Q's selling price and variable costs are $15 and $10, respectively. If fixed costs are $60,000 and Valley sells twice as many units of Product Mas Product , what is the BEP in units for Product M? a. 4,000 b. 6,000 C. 12,000 d. 8,000
The correct option is A, The break-even point in units for Product M is 4,000 units.
Since we know that the Number of units of Q = 2 * the Number of units of M, we can substitute this value into the equation:
Total contribution margin = $5 * x + $5 * (2x) = $5x + $10x = $15x
Setting the total contribution margin equal to the fixed costs:
$15x = $60,000
Solving for x:
x = $60,000 / $15 = 4,000
The break-even point is a financial concept that determines the level of sales or revenue needed for a business to cover all its costs and expenses, resulting in neither profit nor loss. It is the point at which total revenue equals total costs, and there is no net income or loss. At this point, a business is said to "break even."
Fixed costs include expenses that do not change with the level of production or sales, such as rent, salaries, and insurance. Variable costs, on the other hand, fluctuate with the level of production or sales, such as raw materials and direct labor. By determining the break-even point, businesses can analyze their cost structure, pricing strategy, and sales targets.
To know more about Break-even point refer to-
brainly.com/question/29569873
#SPJ4
a stacked column chart is an advanced version of the
A stacked column chart is an advanced version of the basic column chart. In a basic column chart, each column represents a single data point, and multiple columns are used to show the comparison between different categories.
However, in a stacked column chart, each column is divided into multiple sections, each representing a different subcategory of the data being displayed. The height of each section represents the value of that subcategory, and the total height of the column represents the total value of the data point being displayed.
The advantage of a stacked column chart over a basic column chart is that it allows for a more detailed analysis of the data, as it can show the breakdown of each data point into its various components. This can be useful in identifying patterns or trends within the data that may not be immediately apparent in a basic column chart. Additionally, it can be used to show the relative importance of different subcategories within each data point.
To know more about stacked column chart click here
brainly.com/question/5547914
#SPJ11
a company issues $50,000 of 4% bonds, due in 5 years, with interest payable semiannually. calculate the issue price of the bonds, assuming a market interest rate of 5%.
The issue price of the $50,000 4% bonds, due in 5 years, with semiannual interest payments, can be calculated by discounting the future cash flows at the market interest rate of 5%.
The issue price represents the present value of the bond's future cash flows, including both the periodic interest payments and the principal repayment.
To calculate the issue price of the bonds, we need to determine the present value of the bond's future cash flows. The bond has a face value of $50,000, an annual coupon rate of 4%, and a maturity of 5 years with semiannual interest payments.
First, we calculate the periodic coupon payment, which is half of the annual coupon rate: 4% / 2 = 2%.
Next, we determine the number of total coupon payments over the life of the bond: 5 years * 2 = 10 coupon payments.
Then, we calculate the present value of each coupon payment by discounting it at the market interest rate of 5%.
Using the present value of an ordinary annuity formula, we calculate the present value of the coupon payments as a series of future cash flows.
Finally, we calculate the present value of the bond's face value at the end of the 5-year period by discounting it at the market interest rate.
The sum of the present values of the coupon payments and the present value of the face value gives us the issue price of the bonds.
To know more about bonds click here: brainly.com/question/31358643
#SPJ11
you wish to invest $17,445 in a mutual fund with an nav of $25.88. the fund charges a front-end load of 4.75 percent. how many fund shares will you receive? round to the nearest share.
Charges a front-end load of 4.75 percent, the fund shares will receive, 641.96 shares.
To determine the number of fund shares you will receive, we need to calculate the amount of money available for investment after deducting the front-end load.
Front-end load is a fee charged by mutual funds as a percentage of the investment amount. In this case, the front-end load is 4.75 percent. So, the amount available for investment can be calculated as:
Investment amount = $17,445 - (4.75% * $17,445)
Now, let's calculate the investment amount after deducting the front-end load:
Investment amount = $17,445 - (0.0475 * $17,445)
= $17,445 - $829.9875
= $16,615.01
Now, determine the number of fund shares you will receive by dividing the investment amount by the net asset value (NAV) per share:
Number of shares = Investment amount / NAV per share
= $16,615.01 / $25.88
Using a calculator, the result is approximately 641.96 shares.
Rounding to the nearest share, you will receive approximately 642 fund shares.
To know more about fund
https://brainly.com/question/20383417
#SPJ4
Each of the following investments produces the same rate of return. Which one has the greatest amount of risk?
A) investment A with a standard deviation of 4%
B) investment B with a standard deviation of 12%
C) investment C with a standard deviation of 8%
D) investment D with a standard deviation of 19%
Option (d), Investment D with a standard deviation of 19% has the greatest amount of risk.
The standard deviation is a measure of the amount of variability or risk in an investment's return. The higher the standard deviation, the greater the risk. In this scenario, all investments produce the same rate of return, but they have different standard deviations. Investment D has the highest standard deviation at 19%, which means it has the greatest amount of risk. Investment B also has a relatively high standard deviation at 12%, indicating a higher level of risk compared to investments A and C, which have standard deviations of 4% and 8%, respectively. Therefore, investment D is the riskiest choice among the given options.
Learn more about standard deviation: https://brainly.com/question/29115611
#SPJ11
A city currently has 137 streetlights. As part of a urban renewal program, the city council has decided to install 3 additional streetlights at the end of each week for the next 52 weeks. How many streetlights will the city have at the end of 42 weeks
The city will have 137 + 126 = 263 streetlights at the end of 42 weeks. It's important to note that this calculation assumes that no streetlights are being removed or replaced during this time
To calculate the number of streetlights in the city after 42 weeks, we need to first find out how many streetlights will be installed in 42 weeks. Since the city is installing 3 streetlights at the end of each week for 52 weeks, the total number of streetlights installed in 42 weeks will be 3 x 42 = 126. We can then add this number to the initial number of streetlights to find the total number of streetlights in the city after 42 weeks. Therefore, the city will have 137 + 126 = 263 streetlights at the end of 42 weeks.
It's important to note that this calculation assumes that no streetlights are being removed or replaced during this time. If any streetlights are being removed or replaced, this calculation may not accurately reflect the total number of streetlights in the city.
To know more about streetlights click here:
https://brainly.com/question/31455814
#SPJ11