Answer: The atomic mass of silver is 107.8
Explanation:
Average atomic mass is the average mass of all the isotopes present depending on the relative abundance of each isotope.
Mass of isotope A = 106.9051
% abundance of isotope 1 = 51.82% = [tex]\frac{51.82}{100}[/tex]
Mass of isotope B = 108.9047
% abundance of isotope 2 = (100-51.82)% = [tex]\frac{48.18}{100}[/tex]
Formula used for average atomic mass of an element :
[tex]A=\sum[(106.9051)\times \frac{51.82}{100})+(108.9047)\times \frac{48.18}{100}]][/tex]
[tex]A=107.8[/tex]
Therefore, the average atomic mass of silver is 107.8
It has been hypothesized that a chemical known as BW prevents colds. To test this hypothesis, 20,000 volunteers were divided into four groups. Each volunteer took a white pill every morning for one year. The contents of the pill taken by the members of each group are shown in the chart below. What is the independent variable in this experiment? *
1. % Developing Colds
2. Number of Volunteers
3. Grams of sugar
4. Grams of BW
Grams of BW
i think thats irtu9rgirg
Independent variable in an investigation is the variable is does not depends on any other variable and on which we can have the control. Hence, the grams of BW is the independent variable here.
What is independent variables?In an experiment the parameters which changes by control or depending on other changes are called variables. There are two kinds variables namely dependant and independent variables.
The dependant variables are those variable which depends upon other variables and whose changes are studying with respect to certain parameters.
Independent variables does not depends on other variable and can be controlled by the researcher. Here, we are studying the % of developing cold with respect to the amounts of BW. The changing variable is BW amount on which the percentage of cold depends.
Therefore, the independent variable is grams of BW and dependant variable is % development of cold.
To find more on independent variables, refer here:
https://brainly.com/question/29430246
#SPJ5
What is the momentum of a 1kg ball moving at 5m/s?
Answer:
5Ns
momentum= mass *velocity
=1*5
=5Ns
Convert
12 x 1025 kg/mL to fg/cm3
Answer:
[tex]1.2x10^{38}\frac{fg}{cm^3}[/tex]
Explanation:
Hello there!
In this case, for such unit conversion we need to realize that 1 kg is equal to 1000 g, 1 g is equal to 1x10⁹ and 1 mL equals 1 cm³, therefore we apply:
[tex]12x10^{25}kg*\frac{1000g}{1kg} *\frac{1x10^9fg}{1g} *\frac{1mL}{1cm^3} \\\\1.2x10^{38}\frac{fg}{cm^3}[/tex]
Best regards!
The energy required to ionize boron is 801 kJ/mol. You may want to reference (Pages 93 - 98) Section 2.5 while completing this problem. Part A What minimum frequency of light is required to ionize boron
Answer:
The frequency is [tex]f = 2,01 * 10^{15} \ Hz [/tex]
Explanation:
From the question we are told that
The energy required to ionize boron is [tex]E_b = 801 KJ/mol[/tex]
Generally the ionization energy of boron pre atom is mathematically represented as
[tex]E_a = \frac{E_b}{N_A}[/tex]
Here [tex]N_A[/tex] is the Avogadro's constant with value [tex]N_A = 6.022*10^{23}[/tex]
So
[tex]E_a = \frac{801}{6.022*10^{23}}[/tex]
=> [tex]E_a = 1.330 *10^{-18} \ J/atom [/tex]
Generally the energy required to liberate one electron from an atom is equivalent to the ionization energy per atom and this mathematically represented as
[tex]E = hf = E_a[/tex]
=> [tex] hf = E_a[/tex]
Here h is the Planks constant with value [tex]h = 6.626 *10^{-34}[/tex]
So
[tex]f = \frac{1.330 *10^{-18}}{ 6.626 *10^{-34}}[/tex]
=> [tex]f = 2,01 * 10^{15} \ Hz [/tex]
what is the relationship between the atomic number and the melting and boiling point
Answer:
As the atomic number of elements increases, the melting point increases because there are more electrons around the nucleus, which creates a stronger negatively-charged force. With stronger forces, the melting point rises. 3. Non-metals usually have low melting points.
Explanation:
The melting point rises as the atomic number of elements increases because there are more electrons surrounding the nucleus, creating a stronger negatively charged force. The melting point rises as the forces become stronger.
What is nucleus?The nucleus is made up of protons, which are positively charged, and neutrons, which are electrically neutral. Quarks are particles that make up protons and neutrons. The nucleus (plural, nuclei) is a positively charged region in the atom's center. It is made up of two types of subatomic particles that are tightly packed together. Protons, which have a positive electric charge, and neutrons, which have a neutral electric charge, are the particles. The nucleus is the most important component of the cell (plural: nuclei). It is derived from a Latin word that means "nut kernel." Definition of Nucleus: A nucleus is a double-membraned eukaryotic cell organelle that contains genetic material.To learn more about nucleus, refer to:
https://brainly.com/question/14110259
#SPJ2
Calculate the pH of a 0.02 M solution of ascorbic acid ( K a1 = 7.9 × 10 –5; K a2 is 1.6 × 10 –12).
a.
2.9
b.
8.2
c.
11.8
d.
11.1
e.
5.8
Answer:
C
Explanation:
Which of the following is NOT an example of deposition?
sand dune
river delta
cave crystal
valley
This science btw
Answer:
Cave Crystal
Explanation:
I believe it's cave crystal because sand dunes, river deltas, and valleys are all examples of deposition.
A major component of gasoline is octane (C8H18). When octane is burned in air, it chemically reacts with oxygen gas (O2) to produce carbon dioxide CO2 and water H2O. What mass of carbon dioxide is produced by the reaction of 7.58 g of octane? Please explain the answer to me like I'm five, I want to understand but the content makes no sense.
Answer:
Mass = 23.232 g
Explanation:
Given data:
Mass of C₈H₁₈ = 7.58 g
Mass of CO₂ produced = ?
Solution:
Chemical equation:
2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
Number of moles of octane:
Number of moles = mass/molar mass
Number of moles = 7.58 g/ 114.23 g/mol
Number of moles = 0.066 mol
Now we will compare the moles of CO₂ with octane from balance chemical equation.
C₈H₁₈ : CO₂
2 : 16
0.066 : 16/2×0.066 = 0.528
Mass of CO₂ produced:
Mass = number of moles × molar mass
Mass = 0.528 mol × 44 g/mol
Mass = 23.232 g
Is nuclear fission exothermic or endothermic? Explain your answer.
Answer:
Exothermic
Explanation:
Nuclear fission means splitting, so there is a lot of energy being released.
1.191 mol N2O3 is put into a 2.00 L flask at 25°C where it decomposes into NO2(g) and NO(g). What is the equilibrium constant (to 4 decimal places) if the reaction mixture contains 0.300 mol NO2 at equilibrium?
Answer:
K = 0.0505
Explanation:
Based on the equilibrium:
N2O3 ⇄ NO2 + NO
K, equilibrium constant, is defined as:
K = [NO2] [NO] / [N2O3]
Where [] are the equilibrium concentration of each species in the mixture.
The initial molarity of N2O3 is:
1.191mol / 2.00L = 0.5955M
In equilibrium, 0.5955M of N2O3 reacts producing X Molar of NO2 and X Molar of NO:
[N2O3] = 0.5955M - X
[NO2] = X
[NO] = X
As equilibrium concentration of NO2 is 0.300mol/2.00L = 0.15M; X = 0.15M:
[N2O3] = 0.5955M - 0.15M = 0.4455M
[NO2] = 0.15M
[NO] = 0.15M
And K is:
K = [0.15M] [0.15M] / [0.4455M]
K = 0.0505
Question 5 of 5
Which two phrases describe the nature of an electromagnetic force?
O A. Acts only when objects touch each other
B. Produced by interactions between magnetic objects
O c. Not a fundamental force of nature
O D. Produced by interactions between electrically charged objects
Answer:
I think it's A and D
Explanation:
I'm not sure if it's right
Answer:
The answer is B and D
Explanation:
trust fr
After heating the solution, you decant the liquid and wash the remaining solid with distilled water. What you are removing by this washing?
Answer:
The solvent
Explanation:
After the solid is recoverd by decanting the liquid, some solvent particles may still adhere to the solid.
In order to remove the solvent that may have adhered to the solid completely , the solid is washed before it is now dried.
In order to remove the remaining liquid present the solid material.
We are washing the solid in order to remove the liquid particles that is attached to the solid material with the help of water. Water is a universal solvent that dissolve large number of solutes in it.
Water removes the liquid from the solid by attaching with that liquid or dissolving in it so that's why we use water for washing a solid in order to remove the impurities from the solid material in which it is placed.
Learn more: https://brainly.com/question/18520645
Which of the following reactions will proceed as drawn below? (Yes or No)
Answer:
i wish i could help but t know either so i wish you luck for an answer once again truly sorry don'
Explanation:
i am sorry but i do not know :(
3. Which of the following molecules would want except to have a nonpolar covalent bond
Answer:
polar bonds are caused by different kind of atoms, because almost every atoms have different powers to attract electrons.
the answer will be the two same atoms, F2
A car travels for 0.5 hours and goes 25 miles. What is the car's speed? (Remember sad + t)
Answer:
s = 22.352 m/s
Explanation:
Given data:
Time taken = 0.5 hours
Distance cover = 25 miles
Car speed = ?
Solution:
First of all we will convert the units.
1 hour = 3600 sec
0.5 hr ×3600 sec / 1hr = 1800 sec
miles to meter:
25 mi × 1609 m/ 1 mi = 40233.6 m
Formula:
s = d/t
s = speed
d = distance
t = time
Now we will put the values in formula.
s = 40233.6 m / 1800 sec
s = 22.352 m/s
A gas has a volume of 300 mL and a pressure of 2 atm. What volume will the gas occupy when the pressure is
increased to 7 atm (total)?
Answer:
The answer is 85.71 mLExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
Since we are finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
We have
[tex]V_2 = \frac{300 \times 2}{7} = \frac{600}{7} \\ = 85.714285...[/tex]
We have the final answer as
85.71 mLHope this helps you
A 25.00-mL aliquot of a nitric acid solution of unknown concentration is pipetted into a 125-mL Erlenmeyer flask and 2 drops of phenolphthalein are added. The above sodium hydroxide solution (the titrant) is used to titrate the nitric acid solution (the analyte). If 12.75 mL of the titrant is dispensed from a burette in causing a color change of the phenolphthalein, what is the molar concentration of the nitric acid solution? (Show all steps for calculating the answer.)
Answer: 0.0611 M HNO3
Answer:
0.0611M of HNO3
Explanation:
The concentration of the NaOH solution must be 0.1198M
The reaction of NaOH with HNO3 is:
NaOH + HNO3 → NaNO3 + H2O
1 mole of NaOH reacts per mole of HNO3.
That means the moles of NaOH used in the titration are equal to moles of HNO3.
Moles HNO3:
12.75mL = 0.01275L * (0.1198mol / L) = 0.0015274 moles NaOH = Moles HNO3.
In 25.00mL = 0.025L -The volume of the aliquot-:
0.00153 moles HNO3 / 0.025L =
0.0611M of HNO3Two fruit flies that are heterozygous for body color and eye color are crossed. Brown body color is dominant to black body color. Red eye color is dominant to brown eye color.
Determine the genotypes of offspring 1-8.
1
2
3
4
5
6
7
8
A 4-column table has 4 rows. The labels of the columns are Upper B Upper E, Upper B e, b Upper E, b e. The labels of the rows are Upper B Upper E, Upper B e, b Upper E, Upper B b Upper E e. The first column has entries 1, Upper B Upper B Upper E e, 4, Upper B b Upper E e. The second column has entries Upper B Upper B Upper E e, 3, Upper B b Upper E e, 7. The third column has entries Upper B b Upper E Upper E, Upper B b Upper E e, 5, b b Upper E e. The fourth column has entries 2,Upper B b e e, 6, 8.
Answer:
the answer is simple
Explanation:
jnnn B upper up of the eye color
Answer:
1. BBEE
2. BbEe
3. BBee
4. BbEE
5. bbEE
6. bbEe
7. Bbee
8.bbee
Question: Can a penny dropped from a building kill a pedestrian below?
Hypothesis:
Controls:
Independent variable:
Dependent variable:
Conclusion:
Answer:
Hypothesis: IF a penny is dropped from a building, THEN it would kill a pedestrian below
Controls: Same building, Same distance
Independent variable: Penny
Dependent variable: Pedestrian's death
Conclusion: The hypothesis is rejected
Explanation:
- The hypothesis is a testable explanation to an observed problem or asked question. Based on the cientific question in this question, a possible hypothesis will be: IF a penny is dropped from a building, THEN it would kill a pedestrian below
- Independent variable is the variable that is changed or manipulated in an experiment. In this case, the PENNY is the independent variable
- Dependent variable is the variable that responds to the change made to the independent variable. It is the measured variable. In this case, the dependent variable is the DEATH OF PEDESTRIANS.
- Controls are those variables that is kept constant or unchanged throughout the experiment. The controls in this experiment are: Same building, Same distance of throw etc.
- The conclusion is whether the hypothesis is accepted or not depending on the result of the experiment conducted. In this case, the hypothesis will be rejected if the penny doesn't kill a pedestrian
The degree of unsaturation, or index of hydrogen deficiency, is the number of pi bonds plus rings in a molecule. Specify the degree of unsaturation (index of hydrogen deficiency) of the following formulas:
(a) C5H6
(b) C10H6Cl2
(c) C4H3NO
Explanation:
The degree of unsaturation is given as;
Degree of unsaturation = (2C + 2 + N - H - X) / 2
(a) C5H6
Using the formular above;
Degree of unsaturation = [ 2(5) + 2 - 6] / 2
Degree of unsaturation = [ 12 - 6 ] / 2 = 3
(b) C10H6Cl2
Using the formular above;
Degree of unsaturation = [ 2(10) + 2 - 6 -2 ] / 2
Degree of unsaturation = [ 22 - 8 ] / 2 = 7
(c) C4H3NO
Using the formular above;
Degree of unsaturation = [ 2(4) + 2 - 3 -1 ] / 2
Degree of unsaturation = [ 10 - 4 ] / 2 = 3
Note: Oxygen is ignored because its presence has no effect on the degree of unsaturation.
explain the reason each step of the separation is performed with three portions of the solvent rather than with a single poriton of solvent
Answer:
Several extractions is more effective than a single extraction.
Explanation:
When extraction is carried out multiple times, for instance, in this case, the extraction was carried out with three portions of the solvent rather than with just a single portion of the solvent, the amount of material left in the residue will be lower, because the extraction is more complete.
Several extractions with smaller volumes of solvent are more effective than a single extraction with a large volume of solvent.
20 POINTS PLEASE ANSWER ASAP!!!!
Why is calcium (Ca) in group 2, period 4 on the periodic table?
A Calcium, like all group 2 elements, is nonreactive and a gas at room temperature.
B Calcium, like all period 4 elements, is nonreactive and a gas at room temperature,
C Calcium, like all group 2 elements, is reactive and a solid at room temperature.
D. Calcium, like all period 4 elements, is reactive and a solid at room temperature.
Calcium (Ca) is in group 2 and period 4 on the periodic table be because Calcium has 2 valence electrons and 4 electron shell. Thus, calcium is a metal like all other group 2 element.
The correct answer to the question is Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.
Calcium is a group 2 element majorly because it has 2 valence electrons. It is also in period 4 because it has 4 electron shells.
Being a group 2 element, calcium is a solid at room temperature and also reactive. All elements in the group 2 are metals.
There are other elements in period 4 which are not solid. For example krypton is an element in period 4 and it is a gas and not reactive.
From the above information, we can conclude that the correct answer to the question is:
Option C. Calcium, like all group 2 elements, is reactive and a solid at room temperature.
See attached image
Learn more: https://brainly.com/question/5979466
which of the following determines an object’s ability to float in water?
a. how much the object weighs
b. what the mass of the object is
c. how dense the object is
d. the volume of the object
ou are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the ee of this solution
Complete Question
You are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the enantiomeric excess?
Answer:
The value is [tex]k = 96 %[/tex]
Explanation:
From the question we are told that
The percentage of enantiomer A is A = 98%
The percentage of enantiomer B is B = 2%
Generally the enantiomeric excess is mathematically represented as
[tex]k = \frac{A -B}{A+B} * 100[/tex]
=> [tex]k = \frac{98 -2}{98+2} * 100[/tex]
=> [tex]k = 96 %[/tex]
For a water in equilibrium with the atmosphere, a pH of 2.0, and a total soluble iron concentration of 1 mg/L, calculate the concentrations of Fe2+(aq) and Fe3+(aq).
Answer:
Fe^2+(aq) = 4.51 × 10^-11 M
Fe3+(aq) = 1.79 × 10^5 M.
Explanation:
So, the first thing to do is to to write out the chemical reaction showing the ionic reaction of the chemical species present in the chemical reaction;
4Fe^2+ (aq) + O2(g) + 4H^+ <---------------------------> 4Fe^3+(aq) + 2H2O(l).
The next thing to do is to determine or calculate for G° and the equilibrium constant,kc. Thus, the value of G° = 4(-4.6) + 2(-237.18) - {4(-78.87)} = -177.28 kJ/mol.
Therefore, the equilibrium constant = e^-∆G°/RT = 1.19 × 10^31.
Therefore the value for Fe^2+ and Fe^3+ can be determine as;
NB=> Recall that [Fe^3+]/[Fe^2+] = kc [(Po2) (H^+)^4]^1/4.
Also, 1/ 55850 = 1.79 × 10^-5 M.
[Fe^2+] + [Fe^3+] = 1.79 × 10^-5. -------(1).
Therefore, [Fe^3+]/[Fe^2+] = kc [(Po2) (H^+)^4]^1/4. = [Fe^3+]/[Fe^2+] = [ 1.19 × 10^31 × 0.2095 × (10^2)^2] ^1/4 = 3.97 × 10^5.
Therefore, [Fe^3+]/[Fe^2+] = 3.97 × 10^5.
[Fe^3+] = 3.97 × 10^5[Fe^2+].
Hence, using the equation (1) above we can determine the value of the species.
[Fe^2+] + [Fe^3+] = 1.79 × 10^-5
[Fe^2+] + [Fe^2+] = 1.79 × 10^-5.
[Fe^2+] + 3.97 × 10^5[Fe^2+] = 1.79 × 10^-5.
[Fe^2+] = 4.51 × 10^-11 M.
Therefore, we will have [Fe^3+]/[Fe^2+] = 3.97 × 10^5.
Thus, [Fe^3+] = [Fe^2+] × 3.97 × 10^5. = 1.79 × 10^5 M.
When methylcyclobutane is treated with chlorine gas and heated, the total number of monochlorinated products, including stereoisomers, is
Answer:
5
Explanation:
The image attached shows the different monochlorination products obtained when chlorine gas is heated with methylcyclobutane.
We must keep in mind that the reaction occurs by free radical mechanism as shown in the image attached. The proportion in which the products are formed depends on the stability of the free radical intermediate leading to that particular product.
Image credit: askiitians
Need help with 8 plssss
Answer:
c,a,b,d
Explanation:
A certain first-order reaction has a rate constant of 2.10×10−2 s−1 at 19 ∘C. What is the value of k at 58 ∘C if Ea = 82.0 kJ/mol ?
Answer:
K₂ = 1.12s⁻¹
Explanation:
Based on Arrhenius equation:
ln K₂/K₁ = -Ea/R (1/T₂ - 1/T₁)
Where K is rate constant,
R is gas constant (8.314J/molK),
T is absolute temperature (In K) Of 1, initial state and 2, final state.
ln K₂/K₁ = -Ea/R (1/T₂ - 1/T₁)
ln K₂/2.10x10⁻²s⁻¹ = -82000J/mol/8.314J/molK (1/(273.15 + 58) - 1/(273.15 + 19))
ln K₂ / 2.10x10⁻²s⁻¹ = 3.976
K₂ / 2.10x10⁻²s⁻¹ = 53.3
K₂ = 1.12s⁻¹
How many moles of each substance is produced when 7 moles of ammonium carbonate decompose?
(NH4)2CO3(s) ⟶ NH3(g) + CO2(g) + H2O(g)
Answer:
1. 14 moles of NH3 were produced.
2. 7 moles of CO2 were produced.
3. 7 moles of H2O were produced.
Explanation:
We'll begin by writing a balanced equation for the decomposition of ammonium carbonate, (NH4)2CO3.
This is illustrated below:
(NH4)2CO3(s) —> NH3(g) + CO2(g) + H2O(g)
There are 2 atoms of N on the left side and 1 atom on the right side. It can be balance by putting 2 in front of NH3 as shown below:
(NH4)2CO3(s) —> 2NH3(g) + CO2(g) + H2O(g)
Now the equation is balanced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 2 moles of NH3, 1 mole of CO2 and 1 mole of H2O.
1. Determination of the number of mole of NH3 produced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 2 moles of NH3.
Therefore, 7 moles of (NH4)2CO3 will decompose to produce = 7 × 2 = 14 moles of NH3.
Therefore, 14 moles of NH3 were produced.
2. Determination of the number of mole CO2 produced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 1 mole of CO2.
Therefore, 7 moles of (NH4)2CO3 will also decompose to produce 7 moles of CO2.
Therefore, 7 moles of CO2 were produced.
3. Determination of the number of mole of H2O produced.
From the balanced equation above,
1 mole of (NH4)2CO3 decompose to produce 1 mole of H2O.
Therefore, 7 moles of (NH4)2CO3 will also decompose to produce 7 moles of H2O.
Therefore, 7 moles of H2O were produced.
he concentration of H2S in a saturated aqueous solution at room temperature is approximately 0.1 M. Ka1=8.9x10-8 Ka2=1.0x10-19 Calculate the pH of the solution in 2 sig figs
Answer:
PH = 4.0
Explanation:
We are given;
Ka1 = 8.9 × 10^(-8)
Ka2 = 1.0 × 10^(-19)
From the 2 values of K given above, we can see that Ka2 is far smaller than Ka1.
Thus, Positive hydrogen ion (H+) will be majorly formed from first dissociation which is Ka1.
Now, the breakdown of the H2S solution is;
H2S⇌[H+] + [HS−]
Thus;
Ka1 = [[H+] × [HS2^(-)]]/(H2S)
HS2^(-) also has a positive hydrogen ion.
Thus, we can rewrite as;
Ka1 = [[H+] × [H+]]/(H2S)
Ka1 = (H+)²/(H2S)
Concentration of H2S is given as 0.1M. Thus;
8.9 × 10^(-8) = (H+)²/0.1
(H+)² = 0.1 × 8.9 × 10^(-8)
(H+) = √(0.1 × 8.9 × 10^(-8))
(H+) = 0.00009433981
Now, PH is gotten from;
PH = -log (H+)
Thus;
PH = -log 0.00009433981
PH ≈ 4.0