Cooling water available at 10°C is used to condense steam at 30°C in the condenser of a power plant at a rate of 0.60 kg/s by circulating the cooling water through a bank of 7-m-long 1.2-cm-internal-diameter thin copper tubes. Water enters the tubes at a mean velocity of 4 m/s and leaves at a temperature of 24°C. The tubes are nearly isothermal at 30°C. Determine the average heat transfer coefficient between the water, the tubes, and the number of tubes needed to achieve the indicated heat transfer rate in the condenser.

Answers

Answer 1

Answer:

Dang this looks hard

Explanation:


Related Questions

On diesel engines, data from ________ sensors are commonly used to adjust exhaust gas recirculation (EGR) rates.

Answers

Answer:

Air mass sensors is the right answer i think

Explanation:

What elements do architects use in their design work to make buildings that encourage people's positive needs

Answers

Answer:

Form/Formal Elements

Explanation:

This should be the correct answer i dont know if im fully correct.

These components are arranged in the order in which a single point becomes a one-dimensional line, a line becomes a two-dimensional plane, and eventually a plane becomes a three-dimensional volume.

What element  do architects use in their design work?

Points, lines, planes, and volumes make up the main components of form, each one developing from the last.

A line is an extension of a point, which is a location in space. A line's extension is referred to as a surface or plan. A plane is stretched into a volume.

In all eras of society, the hearth served as the sacred center around which structure and order were given. It is the foundational and most significant part of architecture.

Therefore, Form/Formal Elements do architects use in their design work to make buildings that encourage people's positive needs.

Learn more about architects here:

https://brainly.com/question/28678154

#SPJ2

Which type of weld is made by welding around the perimeter of a
hole?

Answers

Joints between two overlapping components are made by depositing a fillet weld around the perimeter of a hole in one component so that it can be attached to the surface of another component exposed through the hole.

if we model the vibrating system as a mass on a spring, what is the mass necessary to achieve the desired resonant frequency when the tip is not interacting with the surface?

Answers

Answer:

2.5 micrograms

Explanation:

The frequency of a vibrating body reduces with increasing mass, but increases with increasing tension.

What is the relation of resonant frequency with mass?

For a spring-mass system, the relationship between frequency and mass can be expressed as follows: as mass increases, frequency decreases; as mass decreases, frequency increases.

The frequency in this case is f, and the mass is m. The relationship between mass and frequency is therefore inverse.

Precession frequency drops when mass is doubled, since angular momentum also doubles at this point. As the radius grows, the angular momentum increases and the precession frequency decreases.

Mass and stiffness are two well-known factors that affect an object's resonance frequency.

While stiffness limits low-frequency transmission because less elastic, or stiff, materials vibrate at higher frequencies, mass limits high-frequency transmission because larger objects vibrate at lower frequencies.

Therefore, The resonant frequency should rise as mass decreases.

Learn more about frequency here:

https://brainly.com/question/13191113

#SPJ5

A resistance of 30Ω is placed in a circuit with a 90 volt battery. What current flows in the circuit?

Answers

V=IR
90=I x 30
90/30= I
Current = 3A

is there water on mars

Answers

Answer:

nope, it is phsically impossible for water to be on mars

Explanation:

Technician A says a typical Manifold Absolute Pressure (MAP) sensor can be connected directly to the intake manifold or connected through a vacuum hose. Technician B says most modern MAP sensors do not use a flexible silicon chip within a chamber anymore. Who is correct

Answers

Answer:

the correct answer is: technician A

Explanation:

this answer is taken directly from the book

One method of determining engine load is through the use of a manifold absolute pressure (MAP) sensor. The MAP sensor can be either directly bolted to the intake manifold or connected through a vacuum hose.

Most modern MAP sensors use a type of flexible silicon chip within a sealed chamber; the chip changes resistance when manifold pressure flexes the chip.




What is the difference between bare and
shielded electrodes

Answers

Answer:

shielded electrodes give metal smotth and clean welds and bare electrodes reduces spattering.

Explanation:

Shielded electrodes minimize sulfur, oxides, and other types of impurities within the base metal to give regular, smooth, and clean welds while bare electrodes,  makes welding more manageable and reduces spattering

Shielded electrodes minimize sulfur, oxides, and other types of impurities within the base metal to give regular, smooth, and clean welds. These coated electrodes also produce a more stable electric arc compared to bare electrodes, which makes welding more manageable and reduces spattering.

The form of energy delivered to an electrical generating turbine in a geothermal facility is in the form of ________.

Answers

Geothermal energy is a product of the heat of Earth's molten interior. The form of energy delivered to an electrical generating turbine in a geothermal facility is in the form of hot water or steam.

Geothermal energy is gotten so as to generate electricity. This is done when water is injected deep underground and it then comes back as steam or hot water.

This is then converted to steam so as to drive a turbine on an electric power generator. The plants makes use of steam to produce electricity.

There are three main types of energy for electricity generation. They are fossil fuels which is made up of coal, natural gas, and petroleum, and then nuclear energy, and renewable energy sources.

Learn more from

https://brainly.com/question/24161565

what is the first step of the engineering design process?

Answers

Answer:

The first step  is to identify the need and constraints

Explanation:

Please help meeeplzzzzzz

Answers

Answer:

labelled diagram for combination wrench

PDA is an abbreviation for professional diagnostic assistant

True or false

Answers

Answer:

False

Explanation:

It means Public Display of Affection

Which of the following is a type of Interior door?

Answers

Answer:

There is no answers given

Explanation:

No answer choices but could your answer be double-action?

how to clean corroded battery terminals in electronics

Answers

Try dipping a cotton swab in white vinegar and wiping directly on the corroded area

Some aluminum casting alloys can be heat-treated after casting for added strength. Group of answer choices False True

Answers

some casting alloys can be heat-treated after casting for added strength, True

How do people put virus

Answers

Tttttttttttgg tee-shirt ye JJ yeesh yesterday ask

Answer:

Explanation:

Don’t know

what factors need to be considered when building housing on a waterway

Answers

Answer:

Flooding

Explanation:

.

When building housing on a waterway one must always consider the factor of Flooding and its repercussions.

What is a Flood?

A flood occurs when there is an excessive amount of water and it covers normally dry areas. The word can also refer to the tide's influx when used in the sense of "flowing water." Floods are a topic of research in the hydrology field and are very important to the fields of agriculture, civil engineering, and public health.

Floods have serious societal repercussions for both communities and people. As most people are well aware, flooding has a number of direct effects, including the loss of life, destruction of property, loss of crops and livestock, and worsening of health due to waterborne infections.

Stream gauges that are put in bodies of water close to inhabited areas are used to measure floods. The National Weather Service receives all data collected by them before it is sent to the United States Geological Survey (USGS), which erected and operates them (NWS)

To read more about Floods, refer to - https://brainly.com/question/28725721

#SPJ2

Always report damage tools to the

Answers

Answer:

Tool enginear??????

Explanation:

sorry for wrong spellin

Answer:

   

Explanation:

What is true about a point and shoot camera?


They always have lenses u can take on and off


They are often smaller than SLR cameras

They are used by professionals more often that SLR cameras

All of the above

Answers

Answer:

What is true about a point and shoot camera?

They are often smaller than SLR cameras

Answer:

They are often smaller than SLR cameras

Explanation:

What is energy security, and why is it an important issue for many countries?

Answers

Lost of Energy, security and importance of issues in countries

Answer:

What is energy security? Energy security is the association between national security and the availability or natural resources for energy consumption.

why is it an important issue for many countries? To ensure that their economics function without interruption and that their people have access to adequate, reliable and affordable supplies of modern and clean energy

Technician A says that a fully charged battery is less likely to freeze than a discharged battery. Technician B says that the state of charge has no impact on freezing. Who is correct

Answers

Answer : Technician B is correct

How to handle or hold sharp edged tools in welding

Answers

Answer: I got you bestie :)

When walking with a sharp tool, the tool should be carried with the blade down and away from the body. When climbing with a sharp tool, tool belts, or buckets with hand lines should be used so workers can have both hands to grip the ladder.

Answer:

sharp egdes should be held far from the body just in case you fall you won't really get cut by it

Explanation:

thanks for the points

Manufacturers measure optical disc drives relative to the original speed, using an X to denote a transfer rate of ______ KBps

Answers

Answer:

5 kbps

Explanation:

Technician A says that comparing the front vehicle height sensors to the rear sensors allows the ECM to determine body roll created by cornering force. Technician B says that vehicle height sensors are only located on the rear. Which technician is correct

Answers

Answer:

its b

Explanation:

if a load has a resistance of 5 ohms, how much current will it draw from a 120-volt power supply?

Answers

Use the V= IR formula
120 V = I (5 ohms)
I = 120 V/5 ohms
I = 24 Amps

Which type of valve is required on the suction side of the fire pump, allowing the pipe to be open to the full diameter of water flow

Answers

Answer:

Gate Valve

Explanation:

A person’s ability to use understand and relate to technology is known as :

A: Technology literacy

B: computer literacy

C: Technology knowledge

D: computer comprehension

Pick one out of those please

Answers

Answer:

A: Technology literacy

I took a computer class in the 8th grade.

Explanation:

hope this helps. . . <3

good luck!    uωu

Fill in the blank with the correct response.

__________involves gathering and analyzing information related to the terrain and environment of enemy forces.

Answers

Answer:

Intelligence

Explanation:

All of the following are benefits of consuming complex carbohydrates, EXCEPT:

Answers

complez carbs have fiber and starch

Answer:

spikes blood sugar quickly is something it doesn't help with

Explanation:

complex-are starches and dietary fibers. They include whole grains such as wheat, barley, bulgar, rye, millet, oats, pasta, rice and legumes. Carbohydrates are our main source of energy. About 50%-60% of your plate at each meal should be composed of carbohydrates. Besides supplying you with long-lasting energy, carbohydrates also supply other nutrients such as vitamins, minerals and protein.

My cramps hurt sm and I’m so emotional

Answers

Answer:

Okay? I can try to help you.

Go to sleep.Cry in pain.

I hope this helped at all.

Answer:

Man up you women. Eat some travis scuout burjer

Other Questions
l=3cmb=4cmh=2cm Can u pls help 50 points! Help (Vectors) A painting that incorporates many different painting media and materials is classified as________ painting. What is a symptom of too much stress over a long period of time?-insomnia-hallucinations-elevated antibodies-low-grade fever Which sentence needs a semicolon added to it?lesA) Whenever I feel afraid I just whistle ahappy tune while I'm walkingB) Ralph's mother constantly naggedhim about his raggedy school clothing.C) Some people prefer to write on acomputer others like to use pen andpaper.D) The t-shirts in the gift shop wereunbelievably over-priced for such asimple design. A car's velocity is modeled by V(t)=0.5t^2 -8t +24 ,where the velocity is in feet per second and time is in seconds. When does the car come to a complete stop12 seconds8 seconds4 seconds2 seconds When the marked price and selling price after discount are given write the formula to find the rate of discount. Which of the following frequencies of light has the lowest energy? who my fav celeb who ever can guess it close to the name gets brainest NO LINK SPAM OR REPORT: The graph shows the cost of buying concert tickets. Tell whether x and y show direct variation. If so, find and interpret the constant of proportionality, k . Then write an equation and find the cost of 14 tickets. pls help asap I'll mark brainliest What will the final temperature of the a block of brass with a mass of 30.6 g is at 87.4Cafter it's added to 62.3 g of water at 28.3C. The specific heat of aluminum is 0.380J/gC. Drag the correct RNA bases to their matching DNA bases. Someone help, this is kinda boring...I'll give brainliest if someone gives me the correct answer In a mixed market economy, property owned by the governmentcan be used by many citizens.can cause economic inequality.can help promote personal wealth.can be used for private businesses. Why is it important to pick a narrator carefully when planning to write anarrative? (16 points)The narrator tells the story, but it is the reader who controls how events are imagined.The narrator's point of view determines the sequence of events.The narrator must know what all characters think at all times.The narrative will change depending on the narrator's tone and point of view. Anyone can help me please angone The cost x of the Sennet familys meal at a restaurant is $172.65, and they tip 20%. Write and use an equation to find the total cost y of the dinner. A car rental agency charges $150 per week plus $0.20 per mile to rent a car. How many miles canyoutravel in one week for $290?A) 208B) 1450 milesC) 700 milesD) 675 miles Customer asked Will the product help me live an opulent lifestyle?