Answer:
0.027 ml
Explanation:
[tex]1\:cl = 10\:ml\\0.0027 \: cl = x\:ml[/tex]
Cross Multiply
[tex]x = 0.027 \:ml[/tex]
The sense of hotness or coldness by touching always does not work well.why?
Answer:
because if the hotness should more it will give it increase the temperature of earn water but it is not so because you have taken out hands from your and cold water So it is reliable
find the R when p=6000,T=3 yrs 6 month ,I=1155
R= 1155×100/6000×3/12
R= 1155×2/3
R=770You should run as an experiment several times to make sure your results are consistent. in the preceding phrase , what does consistent mean
Answer:
To get a final result of experiments, an experiment is repeated several times and the result is noted every time to make sure the results are consistent.
Here the "consistent" meaning is either "same" or "nearby". Consistent results are required in experiments that show constant relation of an experiment to the same principles and the result is not different when performed the same experiment several times.
When performing the same experiment several times, the end result of each experiment should consistent means adhered to the same principle for a successful experiment.
how is the caloric value of a food sample determined?
A food sample's caloric value is calculated. By dividing the total weight throughout grams of a particular food by the nutritionists' calculated energy values.
What is calorie?The calorie is an amount of energy that derives from the outmoded caloric concept of heat. Two primary interpretations of "calorie" are frequently used due to historical factors.
The quantity of energy needed to elevate the temperature from one water molecule through one degree Celsius is known as a big calorie, food caloric intake, dietary calorie, simply kilogram calorie. A food sample's caloric value is calculated. By dividing the total weight throughout grams of a particular food by the nutritionists' calculated energy values.
Therefore, a food sample's caloric value is calculated. By dividing the total weight throughout grams of a particular food by the nutritionists' calculated energy values.
To know more about calorie, here:
https://brainly.com/question/3541581
#SPJ2
PLEASE PLEASE ANY CHEMISTRY EXPERT!! HELP NEEDED. See attached.
Determine whether each pair of compounds forms a homogeneous solution when combined. For those that form homogeneous solutions, indicate the type of forces that are involved.
Answer:
Explanation:
1st) one are homogenous because the have the same kind of force 9 London force ) all the hydrocarbons are nonpolar and have a London force between their molecules
so pentane dissolve in hexane (like dissolves like )
2nd ) CBr4 has a tetrahedral shape its a nonpolar compound (London bond )
but the water is polar molecules has a ( hydrogen bond ) its molecular shape (bent shape) . Both do not dissolve in each other because they have a different kinds of bond so they are not a homogenous solution .
3rd) its a homogenous because the water can dissolve the ionic bonds between the Li ( cation ) and (NO3 -1 anion ).
4th ) here we can say alcohol can dissolve in a little amount why ?
pentane has a London force bond Alcohol has two different parts first part has OH making hydrogen bond which cant dissolve in the pentane different kinds of bonds ,and the other part -CH3 has a London force bond that can dissolves easily in the pentaneso one part dissolves but the other part can't dissolve so the two compound are slightly dissolves in each other that which mean its not a homogenous solutionWhat characteristics identify a substance?
Answer:
All substances can be characterized by their unique sets of physical and chemical properties.
what is the difference between ecosystem services natural resources
Answer: Ecosystem services are the flows of benefits which people gain from natural ecosystems, and natural capital is the stock of natural ecosystems from which these benefits flow. So, a forest is a component of natural capital, while climate regulation or timber might be the ecosystem service it provides.
TAn adult with the flu has a temperature of 103.0 ∘F.
Express your answer as an integer.
A brain contains 1.10×10^10 neurons.
Express your answer as an integer.
The time for a nerve impulse to travel from the feet to the brain is 0.46 s.
Express your answer as an integer.
Answer:A integer is a whole number.
An adult with the flu has a temperature of 102°F
A brain contains neurons (moving the decimal point to the right side power of 10 increases........here decimal point is moved to two places to the right side so power of 10 decreases from 10 to 8)
The time for a nerve impulse to travel from the feet to the brain is s. (moving the decimal point to the right side power of 10 increases........here decimal point is moved to two places to the right side so power of 10 decreases from 0 to -2)
Explanation: i am sorry for being 2 year late :(
i hope this answer your question if this is wrong or correct please let me know
A runner averages 8 minutes and 25 seconds per mile. What is her average velocity in miles per hour?
8 minutes and 25 seconds is the same as 8.25 in decimal form.
Divide by 60 minutes.
60 / 8.25 = 7.27 miles per hour
Best of Luck!
What is temperature
Answer:
Temperature is a physical quantity that expresses hot and cold. It is the manifestation of thermal energy, present in all matter, which is the source of the occurrence of heat, a flow of energy, when a body is in contact with another that is colder. Temperature is measured with a thermometer.
Answer:
The degree or intensity of heat present in a substance or object
M= 34.1g V= 78.5 mL D=?
Answer:
The answer is
0.43 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 34.1 g
volume = 78.5 mL
The density is
[tex]density = \frac{34.1}{78 .5} \\ \approx 0.434394904...[/tex]
We have the final answer as
0.43 g/mLHope this helps you
Which action changes the identity of substance referenced
Answer:
When iron turns to rust, the chemical identity of the iron changes. When you break ice, the ice is still ice
14. Which of the following will result in a chemical change?
A. Melting ice to obtain water
B. Evaporating alcohol into vapor
C. Burning coal in a furnace
D. Drying wood in a shed
Help ASAP
Answer:
C
Explanation:
a chemical change is when a substance changes into another.
wood burning turns into heat which would be considered a chemical change
Based on your observations of the laboratory assignment(s) that produced gases, can you conclude
that the same gas was produced in each assignment? Briefly explain.
Answer:
With the use of same chemicals, same gas will be produced while the use of different chemicals, different gases will be produced.
Explanation:
The same gas was produced in each assignment if the same chemicals are mixed with each other while different gases were produced in each assignment when different chemicals are allowed to mix. If every time, same chemicals and same concentration of chemicals are mixed together, the result will be the same means production of same gas but if different chemicals are allowed to mix, then the product will be the production of different gases.
For what types of numbers is scientific notation especially
useful? I. very large numbers II. very small numbers
a ll only
b Neither I nor ||
Cl and II
d l only
The correct answer is C: I and ||
Scientific notation is used for very large and very small numbers.
It is more comfortable sometimes to express numbers in scientific notation. The parts of a scientific notation for number are: coefficient, base and exponent.
The larger or smaller the exponent, the more convenient it is to express the number in scientific notation.
Hence, very large and very small numbers are best expressed in scientific notation.
https://brainly.com/question/15361382
What is 2.1 x 10^6 + 6.2 x 10^7 in scientific notation
Answer:
2100000 + 62000000
Explanation:
You move the decimal place to the right or left acording to the exponent (right if the exponent in positive, left of the exponent in negative.) Ex: if you're solving for 6.2*10^7 you move the decimal 7 places to the right.
Hope this helped,
-Kiddoo :)
Which of these is a chemical property?
boiling point
odor
ability to rust
color
Answer:
ability to rust
Explanation:
i'm like 90% sure thats correct
Naturally occurring boron has an atomic mass of 10.810 amu consists of two isotopes. One of those isotopes is 10B with an isotopic mass of 10.0129 amu and an abundance of 19.9%. What is the isotopic mass of the other isotope?
Answer:
boron has an atomic mass of 10.810 amu consists of two isotopes.
Answer:
boron has an atomic mass of 10.810 amu consists of two isotopes.
Explanation:
which of the following best describes a non metal
Answer:
-a nonmetal is a substance that lacks the characteristics of a metal.
-Seventeen elements are generally classified as nonmetals: most are gases (hydrogen, helium, nitrogen, oxygen, fluorine, neon, chlorine, argon, krypton, xenon and radon); one is a liquid (bromine); and a few are solids (carbon, phosphorus, sulfur, selenium, and iodine).
What substance is neither an acid nor a base? How does it stay neutral? HURRY PLS
Answer:
21. Most metals are brittle.
22. increases from top to bottom within the group
23. Neon is the most stable element because its highest occupied energy level is filled.
24. transfer of electrons
25. electrons are not shared equally between atoms
26. BeCl2
27. double-replacement and decomposition
28. exothermic
29. The reaction rate decreases.
30. The salt dissolved most quickly in the warm water.
31. saturated
32. feels slippery
33. hydroxide ions in solution
34. stay about the same
35-40. I do not know.
41. a bee hovering around a bee hive
42. the number of valence electrons in atoms of the element
Explanation:
21. Metals are ductile and malleable (conveniently also characteristics for chewing gum). They are stretchy and squishy. Brittle is the opposite of stretchy and squishy, and is a characteristic of non-metals.
22. On the periodic table, elements higher up are safer to use in labs. They are safer because they are less likely to react with other substances. Therefore the tendency to react with other substances increases from top to bottom within the group.
23. "Noble gases stable" (periodic table song by ASAP Science). Neon is a noble gas, therefore it is stable. When elements have only one electron to gain or lose, they are very reactive or least stable.
24. The formation of an ionic bond (metal + non-metal) is caused by the giving and receiving of electrons. Neutrons and protons do not transfer. Electrons are shared in covalent/molecular bonds (between non-metals).
25. A polar covalent bond occurs between non-metals, therefore they share electrons (ionic bonds transfer electrons). Non-metals become anions (whereas metals become cations). Polar bonds have unequal sharing and nonpolar bonds have equal sharing.
26. A one-to-two ratio of beryllium ions to chloride ions means for every Be, there are two Cl. The number of atoms is represented by the ratio, and the numbers of atoms are written as subscripts after the element symbol.
27. MgCO2 reacting with HNO3 to form magnesium nitrate and carbonic acid is a double-replacement reaction. The elements in the beginning substances "switch partners" to form the products.
Carbonic acid then breaks down into water and carbon dioxide is decomposition. This occurs when the elements that make up a compound are split up.
28. In 2Cu + O2 => 2CuO + 315 kJ , the energy is on the right side. The right side is the products, or the stuff that was made. kJ is a unit to measure energy, therefore energy was made. Exothermic is the term that means energy was released.
29. Since oxygen is needed for a fire to burn, decreasing the oxygen slows the reaction rate (the reaction is burning, formally known as combustion).
30. Two things help substances dissolve: heat and stirring. Warm water is hotter than room-temperature water and ice water. This makes the salt dissolve faster.
31. A solution that contains more solute than it would normally hold is saturated. Saturated means there is a more than concentrated amount of solute in the solution. Concentrated is when there is a maximum amount of solute that will dissolve.
32. Acids do not feel slippery -- that is a characteristic of a base. To remember, bases are generally soaps and soaps are slippery. Acids taste sour and bases taste bitter. Both acids and bases change the color of an indicator .
33. A base produces hydroxide ions, represented by OH. The OH is usually at the end of the chemical formula. Acids produce hydrogen ions, generally written at the front of the chemical formula.
34. Adding a little bit of acid to a buffer will cause the pH of the solution to stay about the same, probably increase a little. Buffer solutions are meant to make the pH "buffer". To remember, DVDs used to buffer. It's the same thing as "lag" for phones.
35-40: I'm sorry, I have no answer.
41. Electrons orbit like the plants revolve around the sun. Electrons revolve around a nucleus. A bee hovering around a bee hive is probably flying around it in circles.
42. The tendency of an element to react is closely related to the number of valence electrons in atoms of the element. If the valency is 8, the electron shell is full. The element is stable, opposite to reactive -- this applies to all noble gases (group 8A on the periodic table). If the valency is 1 or 7, the element is very close to being stable but not, the "desire" is so great and makes the element very reactive.
. A certain medication is set to deliver through an IV at a rate of 3.0 mg/min. What is this rate in mg/s?
Answer:
[tex]rate=0.05\frac{mg}{min}[/tex]
Explanation:
Hello,
In this case, considering that 1 min equals 60 seconds, we need to perform the unit conversion as shown below in order to compute the rate on mg/s:
[tex]rate=3.0\frac{mg}{min}*\frac{1min}{60s} \\ \\rate=0.05\frac{mg}{min}[/tex]
Best regards.
What is the use of density in the calculation of percentage by mass?
Answer:
First, the direct method requires recording the total mass of solution, and then evaporating off the solvent. The solid left behind is the solute, which is then weighed and used to calculate mass percent. Density can also be used to determine the mass percent of an unknown concentration.
in my opinion:)
Select the words that correctly complete the sentences. A class uses 10 students to model a lithium atom. Each student represents a particle in the atom. Three students wear signs with a “+” sign, representing (electrons / neutrons / protons). The four students with “0” signs represent (neutrons / protons / electrons ). Each of the remaining students wear a “–” sign, representing (protons / electrons / neutrons)
Answer:
Explanation:
Protons.
Electrons.
Neutrons.
I hope I helped you! :)
From the following list of elements, select the elements that are likely to form a cation. Choose one or more: A. oxygen B. chlorine C. calcium D. barium E. cesium F. rubidium G. lead H. scandium I. phosphorous From the following list of elements, select those that will always form ionic compounds in a 1:2 ratio with the halogens. Choose one or more: A. phosphorous B. lead C. chlorine D. cesium E. rubidium F. scandium G. barium H. oxygen I. calcium
Answer:
(i). The elements that are likely to form a cation
(C). calcium, (D). barium, (E). cesium, (F). rubidium, (G). lead and (H). scandium
(ii). The elements those that will always form ionic compounds in a 1:2 ratio with the halogens
(B). lead, (G) barium and (I). calcium
Explanation:
Given that,
The following list of elements,
A. oxygen B. chlorine C. calcium D. barium E. cesium F. rubidium G. lead H. scandium I. phosphorous
We know that,
Cation is defined as, an element which is able to donate electron easily and obtained positive ion.
All metal elements able to form cations.
We need to find the elements that are likely to form a cation
Using given list
(C). calcium
(D). barium
(E). cesium
(F). rubidium
(G). lead
(H). scandium
(II). The following list of elements,
A. phosphorous B. lead C. chlorine D. cesium E. rubidium F. scandium G. barium H. oxygen I. calcium
We know that,
All given metal ions can form ionic compound with halogens as 1:2 ratio because all given metals can form +2 charge.
We need to calculate the elements those that will always form ionic compounds in a 1:2 ratio with the halogens
Using given list.
(B). lead
(G) barium
(I). calcium
Hence, (i). The elements that are likely to form a cation
(C). calcium, (D). barium, (E). cesium, (F). rubidium, (G). lead and (H). scandium
(ii). The elements those that will always form ionic compounds in a 1:2 ratio with the halogens
(B). lead, (G) barium and (I). calcium
What state of matter is ice in a glacier?
Gas
Liquid
Solid
Transitive
Answer: solid
Explanation:Ice is the solid state of water, a normally liquid substance that freezes to the solid state at temperatures of 0 °C (32 °F) or lower and expands to the gaseous state at temperatures of 100 °C (212 °F) or higher.
Give two real life applications of chromatography
Answer:
Food testing.
Beverage testing.
Drug testing.
Forensic testing.
Answer:
1. Additive detection
2. Crime scene testing
A pure copper penny contains approximately 2.9×1022 copper atoms. Use the following definitions to determine how many ______ of copper atoms are in a penny. 1doz=12 1gross=144 1ream=500 1mol=6.022×1023 Part A dozens Express your answer in dozens to two significant figures.
Complete question is;
A pure copper penny contains approximately 2.9 × 10^(22) copper atoms.
1 doz = 12
1 gross = 144
1 ream = 500
1 mol = 6.022 × 10^(23)
Use these definitions to determine the following:
A) How many dozens of copper atoms are in a penny.
B) How many gross of copper atoms are in a penny
C) How many reams of copper atoms are in a penny.
D) how many moles of copper atoms are in a penny?
All answers can be rounded to two significant figures
Answer:
A) 2.4 × 10^(21) dozens
B) 2.01 × 10^(20) gross
C) 5.8 × 10^(19) reams
D) 0.048 mol
Explanation:
A) A dozen contains 12.
Therefore, 2.9 × 10^(22) copper atoms will contain;
(2.9 × 10^(22))/12 dozens = 2.42 × 10^(21).
In 2 significant figures, we have;
2.4 × 10^(21) dozens
B) 1 gross = 144
Therefore, 2.9 × 10^(22) copper atoms will contain;
(2.9 × 10^(22))/144 gross ≈ 2.01 × 10^(20) gross
C) 1 ream = 500
Therefore, 2.9 × 10^(22) copper atoms will contain;
(2.9 × 10^(22))/500 reams = 5.8 × 10^(19) reams
D) 1 mol = 6.022 × 10^(23)
Therefore, 2.9 × 10^(22) copper atoms will contain;
(2.9 × 10^(22))/(6.022 × 10^(23)) = 0.048 mol
The Urbana wastewater treatment plant discharge permit limits the discharge of ammonia/ammonium (NH3/NH4 ). To meet this permit, the ammonium is converted to nitrate (NO3 - ) by biological nitrification in trickling filter towers. The solution entering the nitrification towers contains 15 mg/L of NH4 as N. Write a balanced reaction for the oxidation of NH4 to nitrate,
Answer:
Explanation:
The conversion of ammonium ion into nitrate ion is a two step process which is written below .
2 NH₄⁺ + 3 O₂ = 2NO₂⁻ + 4 H⁺ + 2H₂O
2NO₂⁻ + O₂ = 2 NO₃⁻
This is a two step reaction . These steps are managed by different class of bacteria.
10. If you were running an experiment to determine the temperature at
which beans sprout the fastest, what would be the independent variable?
A.The number of beans you plant.
B.The height of the sprouts you grow
C.The amount of water you give the beans.
D. The temperature at which each bean is kept.
.
Answer:
The temperature at which each bean is kept
Explanation:
Independent variable is what YOU CHANGE
The temperature at which each bean is kept is the independent variable.
INDEPENDENT VARIABLE:
Independent variable is a variable that is changed or manipulated by the experimenter. The independent variable, which is also called manipulable variable, causes the dependent variable to respond, which is measured or recorded. In an experiment to determine the temperature at which beans sprout the fastest, the independent variable is the temperature at which each bean is kept is the independent variable.Learn more: https://brainly.com/question/17498238?referrer=searchResults
A average marathon runner run the 26.1 miles in 4 hrs 30 minutes. What is the runners average pace in miles/minutes.
Explanation:
4hr 30 m = 270 min
270/ 26.1 = 10. 34
1 mile per 10.34 mins