Conventional current is in the direction of option B) anode to cathode through the metallic path. Conventional current flows from the positive side (anode) to the negative side (cathode) of a circuit, following the path of least resistance provided by the metallic conductor. This concept was established before the discovery of electrons and their role in current flow.
Conventional current refers to the flow of positive charges in a circuit. Therefore, the direction of conventional current is from the anode to the cathode through the metallic path, which is option B. This convention was established before the discovery of electrons and the realization that the actual flow of electric charge is from negative to positive. However, the convention of using conventional current as the standard for analyzing circuits is still widely used today in electrical engineering and physics. It is important to keep in mind that while conventional current is used to describe the direction of current flow, the actual flow of electrons is in the opposite direction.
Learn more about current here :-
https://brainly.com/question/31592688
#SPJ1
68.47 grams of water vapor occupies what size container ( in liters ) at STP?
At STP, 68.47 grams of water vapour occupy a volume of 22.4 litres.
At STP, the temperature is 273 K (0 °C) and the pressure is 1 atm. According to the Ideal Gas Law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
To determine the volume of 68.47 grams of water vapor at STP, we need to first convert the mass of water vapor into moles. The molar mass of water is 18.01528 g/mol. Therefore, the number of moles of water vapor is:
moles = mass / molar mass = 68.47 g / 18.01528 g/mol = 3.8001 mol
At STP, one mole of any gas occupies a volume of 22.4 liters. Therefore, the volume of 3.8001 moles of water vapor is:
V = n x 22.4 L/mol = 3.8001 mol x 22.4 L/mol = 84.93 L
Therefore, the answer is 22.4 liters, which is the volume occupied by 1 mole of water vapor at STP.
To know more about the Water vapor, here
https://brainly.com/question/6033451
#SPJ1
What effect does the concentration of base added have on the reliability of the results of your titration?
When performing a titration, the goal is to determine the concentration of an unknown solution by reacting it with a known concentration of a base (or acid) until the equivalence point is reached. The equivalence point is the point at which the stoichiometrically equivalent amounts of acid and base have reacted.
The reliability of the titration results depends on achieving an accurate determination of the equivalence point. If the concentration of the base added is too low, it may be difficult to accurately detect the equivalence point, leading to imprecise or unreliable results. In such cases, the titration curve may exhibit a gradual and less distinct change in pH, making it challenging to determine the exact equivalence point.
Therefore, it is important to choose an appropriate concentration of base that allows for a clear and well-defined equivalence point to ensure reliable and accurate results in the titration process.
Learn more about stoichiometrically ,
https://brainly.com/question/29856106
#SPJ4
calculate the solubility of srco3 in water at 25 c. you'll find Ksp data in the aleks data tab. round your answer to 2 significant digits.
g/l
To calculate the solubility of SrCO3 in water at 25°C, we need to use the Ksp value given in the Aleks data tab. Ksp is the solubility product constant and it tells us how much of a solid can dissolve in a solvent. The Ksp value for SrCO3 is 3.3 x 10^-9 at 25°C.
This means that if we dissolve SrCO3 in water, it will only dissolve to a certain extent before reaching its maximum solubility. To calculate the solubility of SrCO3, we can use the following formula: Ksp = [Sr2+][CO32-] where [Sr2+] and [CO32-] are the molar concentrations of the ions in solution. Since SrCO3 dissociates into one Sr2+ ion and one CO32- ion, we can assume that the molar concentration of Sr2+ is equal to the molar concentration of CO32-. Let x be the solubility of SrCO3 in mol/L. Then, we have: Ksp = x^2 x = sqrt(Ksp) x = sqrt(3.3 x 10^-9) = 5.7 x 10^-5 mol/L To convert this to g/L, we need to use the molar mass of SrCO3, which is 147.63 g/mol. 5.7 x 10^-5 mol/L x 147.63 g/mol = 0.0084 g/L Rounding to 2 significant digits, the solubility of SrCO3 in water at 25°C is 0.0084 g/L.
Learn more about solubility here-
https://brainly.com/question/31493083
#SPJ11
Mixing a concentrated strong acid with a concentrated strong bases is dangerous, because:
I. The reaction between the hydronium ion and the hydroxide ion is very exothermic
II. Acid-base reactions are always extremely dangerous
III. When using concentrated solutions, the relative amount of water available to absorb heat is small
a. I & II
b. II & III
c. I & III
d. II only
The correct answer is (c) I & III because the reaction between a concentrated strong acid and base releases heat and concentrated solutions have limited water to absorb it.
How acid-base reaction occurs?When a concentrated strong acid and a concentrated strong base are mixed, an acid-base reaction occurs, which can produce a large amount of heat. The reaction between hydronium ions (H₃O⁺) from the acid and hydroxide ions (OH⁻) from the base is highly exothermic, meaning that it releases a significant amount of heat. This is why mixing concentrated strong acids and bases can be dangerous.
Moreover, when using concentrated solutions, the relative amount of water available to absorb heat is small. This means that any heat generated during the reaction may not be adequately absorbed or dissipated, which can result in an increase in temperature and potentially cause a violent reaction.
However, statement II is incorrect since not all acid-base reactions are extremely dangerous. The danger depends on the specific acids and bases being used, as well as the concentration and conditions of the reaction.
Learn more about Acid-base reaction
brainly.com/question/31262369
#SPJ11
A backdraft explosion can occur when
- There is a lack of fuel in a partially-burned room
- There is a lack of oxygen in a partially-burned room
- A door is opened into a room instead of opening into a hallway or outside
- A fire is very smoky
A backdraft explosion can occur when there is a lack of oxygen in a partially-burned room. This situation can be exacerbated if a door is opened into the room, introducing a sudden supply of oxygen, which then leads to a rapid combustion of the remaining fuel, causing the explosion. A fire being very smoky may also indicate a lack of oxygen, increasing the risk of a backdraft explosion.
A backdraft explosion can occur under certain conditions such as when there is a lack of fuel in a partially-burned room or a lack of oxygen in a partially-burned room. Additionally, if a door is opened into a room instead of opening into a hallway or outside, it can create a draft that can lead to a backdraft explosion. Furthermore, a fire that is very smoky can also lead to a backdraft explosion as the smoke can build up and ignite when oxygen is suddenly introduced. It is important to be aware of these potential dangers and to take necessary precautions to prevent a backdraft explosion from occurring.
Learn more about backdraft explosion at brainly.com/question/28256373
#SPJ11
complete the mass balance expression for a saturated solution of ag2co3 . ignore any subsequent reactions of ag .
The mass balance expression for a saturated solution of Ag₂CO₃ can be written as follows:
Mass of Ag₂CO₃(s) = Mass of Ag₂CO₃(aq) + Mass of H₂O
This equation represents the equilibrium state of a saturated solution of Ag₂CO₃, where the mass of the solid Ag₂CO₃ is equal to the sum of the mass of Ag₂CO₃ in solution and the mass of water present in the solution.
Ag₂CO₃ is sparingly soluble in water and its solubility increases with increasing temperature. However, when the solution becomes saturated, the rate of dissolution is equal to the rate of precipitation, and the concentration of Ag₂CO₃ remains constant.
It is important to note that the mass balance expression only considers the dissolved Ag₂CO₃ and not any subsequent reactions of Ag. This means that any other reactions that may occur after Ag₂CO₃ dissolves in water, such as the formation of silver ions (Ag⁺) or the precipitation of other compounds, are not taken into account.
In summary, the mass balance expression for a saturated solution of Ag₂CO₃ shows the relationship between the mass of solid Ag₂CO₃, the mass of dissolved Ag₂CO₃, and the mass of water in the solution. It provides a useful tool for understanding the behavior of Ag₂CO₃ in solution and can be used to calculate the solubility of the compound under different conditions.
To know more about balance expression, refer to the link below:
https://brainly.com/question/28500291#
#SPJ11
Write one sentence defining pure substances and one sentence defining mixtures.
Write one sentence describing the similarity between pure substances and mixtures, and one sentence describing the difference between pure substances and mixtures.
Answer: Pure substances are substances that are made up of only one kind of particle and have a fixed or constant structure. A mixture is made when two or more substances are combined, but they are not combined chemically. Mixtures and pure substances are similar in that they are both matter, so they are both composed of atoms.
Explanation:
Talc, a mineral found in baby powder, is composed of 19.2% Mg. 29.6%
Si, 42.2% O, and 9.0% H. Its molar mass is 379.56 g/mol.
Talc, a mineral found in baby powder, is composed of 19.2% Mg. 29.6%
Si, 42.2% O, and 9.0% H. Mg[tex]_3[/tex]Si[tex]_4[/tex]O[tex]_{10}[/tex] (OH)[tex]_2[/tex] is the empirical formula.
The definition of an empirical formula for a compound is one that displays the ratio of the components present in the complex but not the precise number of atoms in the molecule. Subscripts are used next for the element symbols to indicate the ratios.
The subscripts in the empirical formula, which represent the ratio of the elements, are the smallest whole integers, making it additionally referred to as the simplest formula.
Mg= 19.2/24 = 0.878mol
Si = 29.6%/56 = 1.175mol
O = 42.2/16 = 2.638mol
H= 9.0/1=9
Mg = 0.878/0.878 = 1
Si = 1.175/0.878 = 1.34
O = 2.638/0.878 = 3.004
H= 9/0.878= 8.5
The empirical formula is Mg[tex]_3[/tex]Si[tex]_4[/tex]O[tex]_{10}[/tex] (OH)[tex]_2[/tex]
To know more about empirical formula, here:
https://brainly.com/question/14044066
#SPJ1
Physical, Chemical, or Therapeutic Incompatibility?:
Penicillin is stable for 24 hours in aqueous solution having a pH of 6.5. However, at pH 3.5, it is degraded in less than an hour.
Penicillin is stable for 24 hours in aqueous solution having a pH of 6.5
in this case is chemical Incompatibility given
Penicillin is a drug that is known to be pH sensitive. In this scenario, the stability of penicillin in an aqueous solution is dependent on the pH level of the solution. Penicillin is stable for 24 hours in an aqueous solution with a pH of 6.5, but at a pH of 3.5, it quickly degrades in less than an hour. This means that the chemical makeup of the penicillin is altered at a pH of 3.5, resulting in its degradation
The incompatibility of penicillin is due to its chemical sensitivity to pH. It is important to note that any medication that is pH sensitive must be stored and administered in a manner that ensures the pH level is within the acceptable range to maintain its stability and effectiveness.
To know more about pH visit:
brainly.com/question/28580519
#SPJ11
the heat of fusion of butane is 80.3 j/g. how much heat is needed to melt 25.0 g of butane? question 47 options: 105.3 j 3.21 j 80.3 j 2.01 x 103 j
The heat needed to melt 25.0 g of butane is 2.01 x 10³ J
To find the amount of heat needed to melt 25.0 g of butane with a heat of fusion of 80.3 J/g, you can use the following equation:
Heat needed = (mass of butane) × (heat of fusion)
Step 1: Identify the mass of butane and the heat of fusion.
Mass of butane = 25.0 g
Heat of fusion = 80.3 J/g
Step 2: Multiply the mass of butane by the heat of fusion.
Heat needed = (25.0 g) × (80.3 J/g)
Step 3: Calculate the heat needed.
Heat needed = 2007.5 J
Rounding to the appropriate significant figures, the closest answer is 2.01 x 10³ J. Therefore, 2.01 x 10³ J of heat is needed to melt 25.0 g of butane.
To know more about the heat of fusion refer here :
https://brainly.com/question/30403515#
#SPJ11
For the following reaction, K > 1. Classify each of the reactants and products based on their strength as Bronsted-Lowry acids or bases.
C9H7N + HNO2Doublearrow.GIFC9H7NH+ + NO2-
a) HNO2 1) stronger acid
b) NO2- 2) weaker acid
c) C9H7NH+ 3) stronger base
d) C9H7N 4) weaker base
For the given reaction with K > 1, we can classify the reactants and products based on their strength as Bronsted-Lowry acids or bases:
a) 1, b) 4, c) 2, d) 3.
C9H7N + HNO2 ⇄ C9H7NH+ + NO2-
a) HNO2 is a stronger acid (1) because it donates a proton to C9H7N.
b) NO2- is a weaker base (4) because it accepts a proton less readily compared to C9H7N.
c) C9H7NH+ is a weaker acid (2) because it donates a proton less readily compared to HNO2.
d) C9H7N is a stronger base (3) because it accepts a proton from HNO2.
To know more about Bronsted-lowry theory : https://brainly.com/question/15516010
#SPJ11
What was/were the problem(s) with the Bohr model?
It only worked quantitatively for H.
Didn't explain why the energies of the orbits are quantized.
Correct!
Both of these were problems.
The Bohr model of the atom was a significant step forward in our understanding of atomic structure. However, it was not without its problems. One of the main issues with the Bohr model was that it only worked quantitatively for hydrogen, and not for more complex atoms.
This limitation meant that the model was not able to explain the spectral lines observed in other elements, which were not predicted by the model.
Another problem with the Bohr model was that it did not provide an explanation for why the energies of the electron orbits were quantized. Bohr's model was based on the assumption that electrons can only occupy certain orbits with specific energy levels. However, he did not provide a mechanism to explain why this was the case.
These problems with the Bohr model were later addressed by the development of more sophisticated models, such as the quantum mechanical model. The quantum mechanical model provided a more accurate description of atomic structure, and was able to explain the spectral lines observed in more complex elements. The quantum mechanical model also provided a theoretical basis for the quantization of energy levels in atoms, which was not explained by the Bohr model.
learn more about Bohr model here: brainly.com/question/14618415
#SPJ11
Which of the following describes the weather forecast shown in the image?
1. Low air pressure and low chance of precipitation
2. Low air temperatures and a high chance of precipitation
3. Low chance of precipitation and low air temperatures
4. Low humidity and high air temperatures
One of the chemicals used in this experiment is SnCl2 (aq). What is its name?
Select one:
A. stannic chloride
B. tinnic chloride
C. tin (II) chloride
D. sulfur nitrochloride
The name of the chemical SnCl2 (aq) is tin (II) chloride. This chemical is commonly used in experiments as a reducing agent and as a source of tin ions. It is a white crystalline solid that dissolves in water to form a clear solution. Tin (II) chloride is also known as stannous chloride or tin dichloride.
In experiments, tin (II) chloride is used as a reducing agent to convert metal ions into their respective metals. It is also used as a source of tin ions in solution. Tin (II) chloride is commonly used in electroplating, as well as in the production of tinplate and tin alloys. It is important to handle this chemical with care as it can be hazardous to human health. Exposure to tin (II) chloride can cause irritation to the eyes, skin, and respiratory system. It is recommended to wear protective gear, such as gloves and a face mask, when handling this chemical. Additionally, tin (II) chloride should be stored in a cool, dry place and kept away from sources of heat and moisture. In summary, SnCl2 (aq) is the chemical name for tin (II) chloride, a commonly used chemical in experiments as a reducing agent and a source of tin ions. It should be handled with care and stored properly to avoid any potential hazards.
Learn more about ions here
https://brainly.com/question/7035607
#SPJ11
What product(s) would you expect to obtain from reaction of 1,3-cyclohexadiene with each of the following?
(a) 1 mol Br2 in CH2Cl2
(b) O3 followed by Zn
(c) 1 mol HCl in ether
(d) 1 mol DCl in ether
(e) 3-Buten-2-one (H2C ═ CHCOCH3)
(f) Excess OsO4, followed by NaHSO3
(a) 1,3-cyclohexadiene would react with 1 mol Br2 in CH₂Cl₂ to give 1,2-dibromo-1,3-cyclohexadiene.
(b) 1,3-cyclohexadiene would react with O₃ followed by Zn to give adipic acid.
(c) 1,3-cyclohexadiene would react with 1 mol HCl in ether to give chlorocyclohexene.
(d) 1,3-cyclohexadiene would react with 1 mol DCl in ether to give deuterated cyclohexene.
(e) 1,3-cyclohexadiene would react with 3-buten-2-one in the presence of an acid catalyst to give a Diels-Alder adduct.
(f) 1,3-cyclohexadiene would react with excess OSO₄, followed by NaHSO₃ to give a vicinal diol.
Learn more about cyclohexadiene ,
https://brainly.com/question/30825457
#SPJ4
what is the next stage after the body plan is established chapter 4 embryological similarities
The next stage after the body plan is established is the process of differentiation into organs and organ systems.
What is a body plan in animal or metazoan developmental stages?A body plan in animal or metazoan developmental stages refers to a group f features developed in the embryo stages that can define a particular taxonomic group such as the formation of the embryo layers in mammals.
Therefore, with this data, we can see that a body plan in animal or metazoan developmental stages is required before continuing with the development of organs by differentiation.
Learn more about body plan here:
https://brainly.com/question/24071084
#SPJ1
What is the basic subunit of elements?
A) molecules
B) neutrons
C) atoms
D) protons
E) electrons
The basic subunit of elements is atoms. Therefore the correct option is option C.
An atom is the smallest unit of an element that retains the chemical properties of that element. It consists of a nucleus, which contains protons and neutrons, and electrons, which orbit the nucleus. The number of protons in an atom's nucleus determines its atomic number and defines the element to which it belongs.
Molecules, on the other hand, are formed when two or more atoms combine chemically. So while molecules can be made up of atoms, atoms themselves are the basic building blocks of elements. Therefore the correct option is option C.
For such more question on atoms:
https://brainly.com/question/6258301
#SPJ11
A chemist needs to neutralize 349 L of HF solution that has a molarity of 3.6 M. She currently has an NaOH solution with a molarity of 5.4 M. How many liters of her NaOH solution would she need to neutralize the HF? The chemical equation for this reaction is HF + NaOH → NaF + H2O. I need the answer in 20 ish minutes! Please help!
Answer:get pranked
Explanation:A chemist needs to neutralize 349 L of HF solution that has a molarity of 3.6 M. She currently has an NaOH solution with a molarity of 5.4 M. How many liters of her NaOH solution would she need to neutralize the HF? The chemical equation for this reaction is HF + NaOH → NaF + H2O. I need the answer in 20 ish minutes! Please help!
Sure, I'd be happy to help! Based on the chemical equation you provided, one mole of HF reacts with one mole of NaOH to form one mole of NaF and one mole of water.
To calculate the number of moles of HF in 349 L of 3.6 M solution, we can use the formula:
moles of solute = molarity x volume in liters
So, moles of HF = 3.6 M x 349 L = 1256.4 moles of HF
Because the reaction is a 1:1 ratio between HF and NaOH, we would need the same number of moles of NaOH to neutralize the HF.
Therefore, we can find the number of liters of 5.4 M NaOH solution needed using the formula:
moles of NaOH = moles of HF
5.4 M x volume of NaOH solution in liters = 1256.4 moles of NaOH
volume of NaOH solution in liters = 1256.4 moles of NaOH / 5.4 M
volume of NaOH solution = 232.3 L
So, the chemist would need approximately 232.3 L of 5.4
predict if a reaction would occur when solutions of 0.1 m naoh and 0.1 m kcl are combined. if you predict a reaction will occur, determine the net ionic equation for the reaction.
There are no H⁺ ions present in the reaction, no acid-base neutralization reaction occurs when 0.1 M NaOH and 0.1 M KCl solutions are combined. Therefore, we cannot predict a reaction occurring between these solutions.
To determine if a reaction would occur when 0.1 M NaOH and 0.1 M KCl solutions are combined, we need to look at the possible chemical reactions that could occur. NaOH is a strong base and KCl is a salt, so we could potentially see an acid-base neutralization reaction between the NaOH and KCl. The balanced equation for this reaction would be:
NaOH + KCl ⇒ NaCl + KOH
To determine the net ionic equation, we need to write the balanced equation in ionic form and then cancel out the spectator ions (ions that appear on both sides of the equation and do not participate in the reaction). The net ionic equation for the reaction above is:
Na+(aq) + OH⁻(aq) + K⁺(aq) + Cl⁻(aq) ⇒ Na⁺(aq) + Cl⁻(aq) + K⁺(aq) + OH⁻(aq)
After canceling out the spectator ions, we are left with the net ionic equation:
OH⁻(aq) + H⁺(aq) ⇒ H₂O(l)
Because they are not involved in the process, the repeating ions need to be taken out of the equation.
Learn more about net ionic equation here
https://brainly.com/question/15466794
#SPJ11
Which sequence represents the relationship between temperature and volume as explained by the kinetic-molecular
theory?
higher volume
->>
O higher temperature → more kinetic energy→more space between particles
O higher temperature → less kinetic energy less space between particles higher volume
O higher temperature → more kinetic energy less space between particles → lower volume
O higher temperature →less kinetic energy→more space between particles → lower volume
Mark this and return
Save and Exit
Next
Submit
The sequence that represents the relationship between temperature and volume as explained by the kinetic-molecular theory is higher temperature/ more kinetic energy/ more space between particles/ higher volume
What is kinetic-molecular theory?The kinetic theory of matter can be described as the theory that stressed that all matter is made of small particles and thses particules are seen to be in random motion with some space between them.
It should be noted that the theory help us to know about matters in their differnt forms such as liquid, solid and gas and the relationshipto temperture and parameters.
Learn more about kinetic-molecular theory at:
https://brainly.com/question/1274627
#SPJ1
Answer:
A.
Explanation:
the specific heat of liquid bromine (br2) is 0.226j/gk. the molar heat capacity of liquid bromine in j/molk is
The molar heat capacity of liquid bromine (Br₂) is approximately 36.14 J/molK, given the specific heat of liquid bromine (Br₂) is 0.226j/gk.
The specific heat capacity of liquid bromine (Br₂) is given as 0.226 J/gK. To find the molar heat capacity in J/molK, we need to convert this value using the molar mass of bromine.
Bromine has an atomic mass of approximately 79.9 u. Since Br₂ is composed of two bromine atoms, its molar mass is 2 * 79.9 u, which equals 159.8 g/mol.
To convert the specific heat capacity (J/gK) to molar heat capacity (J/molK), we multiply the specific heat capacity by the molar mass of Br₂:
Molar heat capacity = Specific heat capacity * Molar mass
Molar heat capacity = 0.226 J/gK * 159.8 g/mol
Molar heat capacity ≈ 36.14 J/molK
Therefore, the molar heat capacity of liquid bromine (Br₂) is approximately 36.14 J/molK.
To know more about molar heat capacity, refer to the link below:
https://brainly.com/question/28302906#
#SPJ11
You receive the following prescription:
Progesterone 4% cream
Apply as directed
60 g
Your pharmacy stocks progesterone cream 10%. How much stock cream is needed to fill the prescription?
Select one:
We need 24 g of the 10% progesterone cream to fill the order for 2 oz (60 g) of 4% progesterone cream.
To determine the amount of stock cream needed to fill the order, we can use a simple formula that involves cross-multiplication.
First, we need to find out how much progesterone is contained in the 4% cream. This can be calculated by multiplying 4% (or 0.04) by the weight of the cream (60 g):
0.04 * 60 g = 2.4 g
So each 60 g of 4% cream contains 2.4 g of progesterone.
To find out how much stock cream (which is 10% progesterone) is needed to provide 2.4 g of progesterone, we can set up the following equation:
10% x y g = 2.4 g
Here, "y" represents the amount of stock cream needed. To solve for "y," we can divide both sides by 10% (or 0.1):
y g = 2.4 g ÷ 0.1
y g = 24 g
Therefore, we need 24 g of the 10% progesterone cream to fill the order for 2 oz (60 g) of 4% progesterone cream.
learn more about progesterone cream Refer: https://brainly.com/question/31074069
#SPJ11
complete question:
You receive the following order: Progesterone 4% cream Apply as directed 2 oz (60 g) Your pharmacy stocks progesterone cream 10%. How much stock cream is needed to fill the order? A) 2.4g B) 24 g C)40 g D)4g
can someone help me
Answer:
it is alredy balanced
Explanation:
CaCO3 -------> CaO + CO2
In the reactant side In the product side
Ca = 1 atom Ca = 1 atom
C = 1 atom C = 1 atom
O = 3 atom O = 1+2 = 3 atom
so there is no need to balance it cause it is already balanced.
When you see a product advertised on social media, how can you determine whether it is making reliable claims?
If a product is seen on social media It can be determined whether it is making reliable claims by researching and checking credentials.
It is crucial to assess claims made about items that are promoted on social media seriously and not only depend on what is said in the advertisement. Finding information on the product from reliable sources outside of social media is crucial. Looking for ratings, reviews, and comments from trustworthy websites or sources, such as consumer review websites, industry insiders, or reliable news organizations is also an effective step.
Further, one must watch out for ratings or reviews that are unreasonably favorable. Additionally, one needs to assess the authority of the source advertising the goods on social media. Looking for trusted businesses, authoritative websites, and verified accounts is essential along with being aware of accounts or websites with dubious credentials or a lack of openness.
Read more about social media on:
https://brainly.com/question/23976852
#SPJ4
Drag each tile to the correct location. Physical property. Chemical property. Tiles: acetic acid can react with another substance and change color. The melting point of tin is 231.9 degrees C. Sodium can react with water to form sodium hydroxide and hydrogen. Iron does not burn when exposed to flame. The density of solid silver is 10.49 grams/centimeter3. Pure water is odorless.
The melting point of tin is 231.9 degrees C, Iron does not burn when exposed to flame, The density of solid silver is 10.49 grams/centimeter³ and Pure water is odorless are Physical property.
Although a physical change happens when substance alters forms without changing its chemical identity, a chemical change is the result of a chemical reaction. If enough energy is provided, many physical changes can be reversed. A different chemical reaction is the only way to undo a chemical change.
The melting point of tin is 231.9 degrees C, Iron does not burn when exposed to flame, The density of solid silver is 10.49 grams/centimeter³ and Pure water is odorless are Physical property. Sodium can react with water to form sodium hydroxide and hydrogen is Chemical property.
To know more about Physical property and Chemical property, here:
https://brainly.com/question/1935242
#SPJ1
Complete the sentences to explain your choice. Match the words in the left column to the appropriate blanks in the sentences on the right. more oxygen atoms less electronegative atoms fewer oxygen atoms more electronegative atoms When comparing HNO3 and HNO2, HNO, is a stronger acid because it has _______ When comparing HCIO, and HCIO, HCIO, is a stronger acid because it has _______ When comparing HCIO, and HBrO, HCIO, is a stronger acid because it has _______ When comparing CCI,COOH and CBr, COOH, CCI,COOH is a stronger acid because it has _______
As an atom's size shrinks, its electronegativity rises. This is due to the fact that electronegativity and atomic size are inversely related. Because of this, the atomic size decreases as electronegativity rises.
The contact between the nucleus and the surrounding electrons is reduced as the atomic radius rises, which results in a decline in electronegativity.
When comparing HNO3 and HNO2, HNO3 is a stronger acid because it has more electronegative atoms (in this case, more oxygen atoms).
When comparing HCIO and HCIO2, HCIO2 is a stronger acid because it has more electronegative atoms (in this case, more oxygen atoms).
When comparing HCIO and HBrO, HCIO is a stronger acid because it has fewer electronegative atoms (in this case, fewer oxygen atoms).
When comparing CCI3COOH and CBr2COOH, CCI3COOH is a stronger acid because it has more electronegative atoms (in this case, more chlorine atoms).
Learn more about electronegativity here
https://brainly.com/question/13557134
#SPJ11
select the compound(s) can undergo an aldol addition reaction in the presence of aqueous sodium hydroxide? question 18 options: 2,2-bromopentanal pentanal 2-methyl pentanal 3-chloropentanal
Option 1 is correct compound. 2-bromopentanal and pentanal do not have alpha-hydrogens and therefore cannot undergo aldol addition reaction in aqueous sodium hydroxide.
Out of the given options, only 2-methyl pentanal and 3-chloropentanal can undergo aldol addition reaction in the presence of aqueous sodium hydroxide. This is because both of these compounds have alpha-hydrogens (hydrogens attached to the carbon adjacent to the carbonyl group), which are necessary for the aldol reaction to occur.
Aldol condensations play an important role in the creation of organic compounds because they provide a dependable way to create carbon-carbon bonds. For instance, the Robinson annulation reaction sequence results in aldol condensation, and the Wieland-Miescher ketone product is an essential component in a variety of chemical synthesis processes.
In the aldol reaction between 2-bromopentanal pentanal and a 2-methyl pentanal, the mechanism for the aldol addition product and the aldol condensation product is described .
Learn more about aldol addition reaction here
https://brainly.com/question/29847503
#SPJ11
The complete question is
select the compound(s) can undergo an aldol addition reaction in the presence of aqueous sodium hydroxide? options: 1. ,2-bromopentanal pentanal option 2. 2-methyl pentanal option 3. 3-chloropentanal
Select the reagent in Step 2 . 5-cyclopentyl-1-pentanol ⟶
Step 1
5-cyclopentylpentanoic acid ⟶
Step 2
1-cyclopentyl-1-butanone 5-cyclopentylpentanoyl chloride ⟶ SOCl 2
PCC (CH 3
CH 2
CH 2
) 2
CuLi Jones Reagent ⟶
CH 3
CH 2
CH 2
MgBr
The correct reagent to use in Step 2 of the given reaction is SOCl₂. This is because the desired product, 5-cyclopentylpentanoyl chloride, can be synthesized through the reaction of 5-cyclopentylpentanoic acid with SOCl₂.
The reaction involves the replacement of the -OH group on the carboxylic acid with a -Cl group from the SOCl₂, resulting in the formation of the desired product.
Other reagents listed may not be suitable for this specific reaction.
PCC (CH₃CH₂CH₂)₂ is typically used for oxidizing primary alcohols to aldehydes or secondary alcohols to ketones.
CuLi is used in Grignard reactions to synthesize carbon-carbon bonds. Jones reagent is used to oxidize primary and secondary alcohols to carboxylic acids.
MgBr is used to form Grignard reagents which can be used for various reactions. However, none of these reagents will produce the desired product of 5-cyclopentylpentanoyl chloride in Step 2.
In summary, the appropriate reagent for Step 2 in the given reaction is SOCl₂ as it facilitates the conversion of 5-cyclopentylpentanoic acid to 5-cyclopentylpentanoyl chloride, which is the desired product.
To know more about reagents, refer to the link below:
https://brainly.com/question/28463799#
#SPJ11
Which of the following would give more than one product when treated with xs HCI? a.hex-1-ene b.hex-2-yne c.hex-I-yne d.hex-3-yne
hex-1-ene, would give more than one product when treated with excess HCl. The correct option is a.
According to concept of Markovnikov's rule, when an unsymmetrical alkene or alkyne is treated with an acid such as HCl, the hydrogen atom from the acid adds to the carbon atom with fewer hydrogen atoms already attached, while the chloride ion adds to the other carbon atom.
Therefore, in the case of the options given, only the first option, hex-1-ene, would give more than one product when treated with excess HCl, as it has two different carbon atoms to which the hydrogen and chloride can add. The other options, hex-2-yne, hex-I-yne, and hex-3-yne, each have only one carbon atom that the hydrogen and chloride can add to, so they would only produce one product.
To know more about HCl, refer to the link below:
https://brainly.com/question/30883334#
#SPJ11
If I have 3.6 x 10^28 atoms, how many moles (of atoms) do I have?
If I have 3.6 *10^{28} atoms, approximately 59,800 moles of atoms.
To determine how many moles of atoms you have, you first need to understand what a mole is. A mole is a unit of measurement that represents a certain amount of substance. Specifically, one mole of a substance is equal to the amount of that substance that contains the same number of particles as there are atoms in 12 grams of carbon-12. This number is known as Avogadro's number, which is approximately 6.02 * 10^{23} particles per mole.
So, to find the number of moles of atoms you have, you need to divide the total number of atoms by Avogadro's number. In this case, you have 3.6 x 10^28 atoms. Dividing this by Avogadro's number (6.02 * 10^{23}) gives you:
\frac{(3.6 * 10^{28} atoms) }{ (6.02 * 10^{23}) atoms/mol)} = 5.98 x 10^4 moles
Therefore, you have approximately 59,800 moles of atoms.
It's worth noting that moles are a very useful unit of measurement in chemistry, as they allow us to easily compare the amounts of different substances based on the number of particles they contain. By using moles, we can also perform calculations such as stoichiometry, which is essential in many chemical reactions.
learn more about Avogadro's number Refer: https://brainly.com/question/21467759
#SPJ11