Consider a t distribution with 3 degrees of freedom. Compute P (t < 1.94) Round your answer to at least three decimal places: P(t <1.94) = (b) Consider a t distribution with 14 degrees of freedom. Find the value of c such that P (-c

Answer:

4!/(2!2!) = 6

There are 6 possible ways that 2 of the 4 dice will land on six.

6(1/6)(1/6)(5/6)(5/6) = 25/216 = .116

B is correct.

If the function x(t) = cos(2π100t + π/3) is sampled at the minimum sampling rate to avoid aliasing for 10 seconds, 2000 points are generated.

The function x(t) = cos(2π100t + π/3) is sampled at the minimum sampling rate to avoid aliasing for 10 seconds.

To avoid aliasing, we need to use the Nyquist-Shannon Sampling Theorem, which states that the minimum sampling rate should be twice the highest frequency in the signal. In this case, the highest frequency is 100 Hz.

Step 1: Calculate the minimum sampling rate.
Minimum sampling rate = 2 * highest frequency = 2 * 100 Hz = 200 Hz.

Step 2: Calculate the total number of points generated in 10 seconds.
A number of points = sampling rate * time duration = 200 Hz * 10 s = 2000 points.

So, 2000 points are generated when the function x(t) = cos(2π100t + π/3) is sampled at the minimum sampling rate to avoid aliasing for 10 seconds.

Learn more about sampling: https://brainly.com/question/24466382

#SPJ11

Answer:

146in2

Step-by-step explanation:

i dont like explaining but im in the test to

Yes it should be surface area

Answer: Another simple way to help get the tears flowing is by yawning. “Try yawning a few times in a row to wake up the tear ducts. This may be helpful ...

Step-by-step explanation:

The derivative of the vertical position of the pumpkin trajectory with respect to its horizontal position is 2ax, as given by option b.

To find the position of maximum height of the pumpkin, the students need to find the point where the derivative of the vertical position with respect to the horizontal position is equal to zero. Setting 2ax equal to zero and solving for x, we get x=0. This means that the pumpkin reaches its maximum height at x=0, or in other words, at the point where it is launched from the trebuchet.

To find the value of the maximum height, we can substitute x=0 into the original equation for the pumpkin's trajectory. This gives us y(0) = b, which means that the maximum height of the pumpkin is b units.

The derivative of the vertical position of the pumpkin trajectory with respect to its horizontal position is 2ax because the derivative of ax^2 with respect to x is 2ax. This means that the rate of change of the pumpkin's height with respect to its horizontal position is proportional to 2ax. When x is zero, the derivative is also zero, which indicates that the pumpkin has reached its maximum height at that point.

This is because at the maximum height, the rate of change of height with respect to horizontal distance is zero. Finally, we find the value of the maximum height by substituting x=0 into the equation for the pumpkin's trajectory.

Learn more about derivative:

brainly.com/question/29144258

#SPJ11

Answer: 82

Step-by-step explanation:

               82

            35   47

       15     20     27

   7      8        12    15

2     5      3        9        6

puzzle two numbers add up to one above

2 numbers under a number add up to make that number

2+5=7

5+3=8 etc

The speed of the airplane in still air is 310 miles per hour.

Let's denote the speed of the airplane in still air as "x" (in miles per hour).

When the airplane is flying with a tailwind, its speed relative to the ground increases. We can use the formula:

speed with tailwind = speed in still air + speed of tailwind

To set up an equation:

350 mi/h = x mi/h + 40 mi/h

To simplify, we have:

x mi/h = 350 mi/h - 40 mi/h

x mi/h = 310 mi/h

To learn more about the speed;

https://brainly.com/question/7359669

#SPJ1

The simple interest after 30 months is $924. 375

To determine the simple interest value, we need to know the formula for calculating it

The formula for simple interest is represented as;

S.I =PRT/100

The parameters of the equation are;

From the information given, we have;

Substitute the values

Simple interest = 8500 × 2.5 × 4.35/100

Multiply the values

Simple interest = 92437.5/100

Divide the values

Simple interest = $924. 375

Learn more about simple interest at: https://brainly.com/question/25793394

#SPJ1

Answer:

B

Step by step solution:

A is an obtuse triangle

B is an acute triangle

C is a scalene triangle

D is an equilateral triangle.

The total mortgage for the $260,000 purchase is $226,100.00. The Option D is closest.

The down payment of the mortgage arrangement will be:

= 15% of $260,000

= 15% * $260,000

= $39,000

Closing costs:

Credit report: $300.00

Loan origination fee= 1% of $260,000 = $2,600.00

Attorney and notary: $500.00

Documentation stamp:

= 0.50% of $260,000

= $1,300.00

Processing fee: $400.00

Total closing costs will be:

= $300.00 + $2,600.00 + $500.00 + $1,300.00 + $400.00

= $5,100.00

The total mortgage for the $260,000 purchase will equals to:

= Purchase price - Down payment + Closing costs

= $260,000 - $39,000 + $5,100.00

= $226,100.

Read more about mortgage

brainly.com/question/1318711

#SPJ1

The fraction of Cos L is 23/25

First, let's understand what a fraction is. A fraction represents a part of a whole. It has two parts: the numerator and the denominator. The numerator represents the part we are interested in, and the denominator represents the whole.

Now, let's look at our problem. We have a right triangle with sides KL and JL, and we need to find cos L. Cosine is defined as the ratio of the adjacent side to the hypotenuse in a right triangle. So, to find cos L, we need to identify the adjacent and hypotenuse sides.

From the given information, we know that KL is adjacent to angle L, and JL is the hypotenuse. So, we can write:

cos L = KL/JL

Now, we need to simplify this fraction. To simplify a fraction, we need to divide both the numerator and the denominator by their greatest common factor (GCF). The GCF of 23 and 25 is 1, so we cannot simplify the fraction any further.

Therefore, the final answer is:

cos L = KL/JL = 23/25

To know more about fraction here

https://brainly.com/question/10354322

#SPJ1

Based on the information, the side length of square 4 = a + b and the side length of square 5 = a + b

The 4 sides of a square are usually the same ;

Hence, each side is called the side length ; from the diagram attached :

Side length of square 4 = a + b

Side length of square 5 = a + b

If the side lengths are equal ; that is (a + b) ; the the area which is the square of the side length will also be the same.

Learn more about square on

https://brainly.com/question/23700096

#SPJ1

Answer:

D.) 7

Step-by-step explanation:

5 trees have a height of from 80 ft to 85 ft.

2 trees have a height of from 85 ft to 90 ft.

Answer: D.) 7

Answer:

D) 7 black cherry trees

Step-by-step explanation:

In the bar graph, we can see that starting at 80 feet, there are 5 trees that range from 80-85 feet.

We can also see that there are only 2 trees that range from 85-90 feet.  The question asks for how many trees that have a height of at least 80 feet, so we add 5+2 to get 7 trees.

Hope this helps! :)

The value of exact solutions of the given system equations graphically is,

⇒ x = (1 ± √ 47i) / 8

We have to given that;

Equations are,

y = x - 3

y = 4x²

Now, Substitute the value of y in (ii);

x - 3 = 4x²

4x² - x + 3 = 0

x = - (- 1) ± √(- 1)² - 4×4×3/8

x = (1 ± √1 - 48) / 8

x = (1 ± √- 47) / 8

Thus, The value of exact solutions of the given system equations graphically is,

⇒ x = (1 ± √ 47i) / 8

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ1

The E-M algorithm is used to estimate the parameters mu and Sigma. The implementation in R involves defining the likelihood function, initializing the estimates, and using the E-M steps to update the estimates.

The E-M algorithm for estimating the mean and covariance matrix of a multivariate normal distribution from a set of observations can be performed in the following steps

Initialization: Choose initial values for the mean vector and covariance matrix.

Expectation step: Calculate the posterior probabilities of each observation belonging to each component of the mixture model using Bayes' theorem and the current parameter estimates.

Maximization step: Use the posterior probabilities to update the estimates of the mean vector and covariance matrix for each component of the mixture model.

Repeat steps 2 and 3 until convergence (i.e., until the change in the parameter estimates falls below a specified tolerance level).

In this case, we have a single multivariate normal distribution with unknown mean vector and covariance matrix. Therefore, we can perform the E-M algorithm to estimate these parameters directly.

Here is the R code for implementing the E-M algorithm

To know more about Bayes' theorem:

https://brainly.com/question/29598596

#SPJ4

Answer:

mean = 52

Step-by-step explanation:

In mathematics, the mean is a measure of central tendency that represents the average of a set of numbers. It is also commonly known as the arithmetic mean.

To calculate the mean, you add up all the numbers in a set and then divide by the total number of values in the set.

So in tho case we would add all the values then divide by the amount of values there are.

1) rewrite values:

42  45  58  63

2) add:

42 + 45 + 58 + 63
= 208

3) divide:

Since there arev4 values we will divide by 4.

208 / 4 = 52

Therefore, the mean is 52

Answer:

[tex]\huge\boxed{\sf Mean = 52}[/tex]

Step-by-step explanation:

42, 45, 58, 63

[tex]\displaystyle Mean = \frac{Sum \ of \ data}{No. \ of \ data} \\\\Mean = \frac{42+45+58+63}{4} \\\\Mean = \frac{208}{4} \\\\Mean = 52\\\\\rule[225]{225}{2}[/tex]

True, The matrix corresponding to the relation {(1, 2), (1, 3), (1, 4), (2, 3), (2, 4), (3, 4)} is [tex]$\begin{bmatrix} 1 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 \\ 0 & 1 & 0 & 0 \\ 1 & 1 & 1 & 0 \end{bmatrix}$[/tex].

The matrix representation of a relation on a set with n elements is an n x n matrix, where the entry in row i and column j is 1 if (i,j) is in the relation, and 0 otherwise. In this case, the set has four elements, so the matrix is 4 x 4.

The relation {(1, 2), (1, 3), (1, 4), (2, 3), (2, 4), (3, 4)} includes the pairs (1, 2), (1, 3), (1, 4), (2, 3), (2, 4), and (3, 4), so the corresponding matrix has 1's in the entries (1, 2), (1, 3), (1, 4), (2, 3), (2, 4), and (3, 4), and 0's elsewhere.

Learn more about the matrix at

https://brainly.com/question/29132693

#SPJ4

The question is -

Consider the relations on the set {1, 2, 3, 4}.

The matrix corresponding to the relation {(1, 2), (1, 3), (1, 4), (2, 3), (2, 4), (3, 4)} is [tex]$\begin{bmatrix} 1 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 \\ 0 & 1 & 0 & 0 \\ 1 & 1 & 1 & 0 \end{bmatrix}$[/tex].

State True or False.

Answer:

To calculate the probability that Kaelyn was selected out of 30 people chosen at random from a group of 480 people, we can use the concept of probability.

Given:

Total number of people in the group (N) = 480

Number of people chosen (n) = 30

We want to find the probability of Kaelyn being selected, which is the probability of selecting 1 person out of 480 people, or 1/480.

So, the probability that Kaelyn was selected is:

P(Kaelyn) = 1/480

This is the final answer, as it represents the probability of Kaelyn being selected out of 30 people chosen at random from a group of 480 people.

Step-by-step explanation:

Answer:

To calculate the probability that Kaelyn was selected out of 30 people chosen

Step-by-step explanation:

Answer:

To create a matrix for this linear system, we can arrange the coefficients of the variables and the constants into a matrix as follows:

| 1 3 2 | | x | | 26 |

| 1 -3 4 | x | y | = | 2 |

| 2 1 1 | | z | | 8 |

To solve the system using row reduction, we can perform elementary row operations to transform the matrix into row echelon form or reduced row echelon form. I will use the latter approach for simplicity:

| 1 0 0 | | x | | 6 |

| 0 1 0 | x | y | = | 5 |

| 0 0 1 | | z | | -1 |

Therefore, the solution to the system is x = 6, y = 5, and z = -1.

Answer:

The measure of angle B is 80°. B is the correct answer.

Answer:

B. mB = 80°

Step-by-step explanation:

Supplementary angles add to 180 degrees

100 +x = 180

x = 180-100

x = 80 degrees

Rounding to 4 decimal places, we expect 9.9600 of the 12 vehicles to use E-ZPass.

Rounding to 4 decimal places, the mode is 10 and the probability associated with the mode is 0.2822.

Rounding to 4 decimal places, the probability of eight or more of the sampled vehicles using E-ZPass is 0.9975.

a. We can use the binomial distribution to model the number of vehicles out of 12 that use E-ZPass. The probability of a vehicle using E-ZPass is 0.83, so the expected number of vehicles out of 12 that use E-ZPass is:

E(X) = np = 12 x 0.83 = 9.96

Rounding to 4 decimal places, we expect 9.9600 of the 12 vehicles to use E-ZPass.

b. The mode of the binomial distribution is the value of X that maximizes the probability mass function (PMF). In this case, the PMF is given by:

P(X = x) = (12 choose x) * 0.83^x * 0.17^(12-x)

We can find the mode by calculating the PMF for each possible value of X and identifying the value(s) with the highest probability. Alternatively, we can use the formula for the mode of the binomial distribution, which is:

mode = floor((n+1)p)

where n is the number of trials and p is the probability of success.

In this case, the mode is:

mode = floor((12+1) x 0.83) = floor(10.08) = 10

The probability associated with the mode is:

P(X = 10) = (12 choose 10) * 0.83^10 * 0.17^2 = 0.2822

Rounding to 4 decimal places, the mode is 10 and the probability associated with the mode is 0.2822.

c. The probability of eight or more of the sampled vehicles using E-ZPass can be found using the binomial distribution:

P(X >= 8) = 1 - P(X < 8) = 1 - P(X <= 7)

Using a binomial calculator or a cumulative binomial table, we can find:

P(X <= 7) = 0.0025

Therefore:

P(X >= 8) = 1 - 0.0025 = 0.9975

Rounding to 4 decimal places, the probability of eight or more of the sampled vehicles using E-ZPass is 0.9975.

To learn more about decimal visit:

https://brainly.com/question/30958821

#SPJ11

To apply the y-function to the provided cme data, we need to first calculate the specific volume (v) for each data point using the ideal gas law: v = (RT)/P

where R is the gas constant, T is the temperature in Kelvin, and P is the pressure. We will assume that the gas is ideal and use R = 8.314 J/mol K.

Next, we need to calculate the y-values for each data point using the equation:

[tex]Y = (v - v_l) /(v_g - v_l)[/tex]

where [tex]v_l[/tex] and [tex]v_g[/tex] are the specific volumes of the liquid and gas phases, respectively, at the given pressure and temperature. We will use the following values for [tex]v_l[/tex] and [tex]v_g[/tex]:

[tex]v_l = 0.001 (m^3/kg)\\\\v\\_g = 5.0 (m^3/kg)[/tex]

Using the specific volume values and the equation for y, we can calculate the y-values for each data point:

| Pressure (MPa) | Temperature (K) | Specific Volume

To know more about  mass here

https://brainly.com/question/86444

#SPJ4

The art museum had 4,000 visitors that month, as 1,600 visitors during a week represented 40% of the total visitors for the month.

Let's denote the total number of visitors for the month with "x".

According to the problem, the number of visitors during a particular week (1,600) was 40% of the total number of visitors for the month.

We can write this as an equation

1,600 = 0.4x

To solve for "x", we need to isolate it on one side of the equation. We can do this by dividing both sides of the equation by 0.4

1,600 ÷ 0.4 = x

Simplifying the left side

4,000 = x

Therefore, the art museum had a total of 4,000 visitors that month.

To know more about total visitors:

https://brainly.com/question/15262826

#SPJ1

The expected number of rolls needed to generate a number below 1/2 is 1.5, which is rounded to 2.

If we pick a random number between 0 and 1 and generate the next number to be at most the previous number, then the expected number of rolls until the generated number is below 1/2 is 2.

To see why, consider the following strategy:

Roll the die once to generate the first number, X1.

If X1 < 1/2, stop.

Otherwise, continue rolling the die until the generated number is below X1.

Once the generated number is below X1, stop.

Let Y be the number of rolls needed to complete this strategy. If X1 < 1/2, then Y = 1, since we stop immediately. Otherwise, we know that X2 < X1, X3 < X2, and so on until we reach a number Xn < Xn-1 < ... < X2 < X1 that is below 1/2. Thus, we need at least n - 1 additional rolls to complete the strategy.

To find the expected value of Y, we can use the law of total probability:

E(Y) = P(X1 < 1/2) × E(Y | X1 < 1/2) + P(X1 ≥ 1/2) × E(Y | X1 ≥ 1/2)

Since the first roll is uniformly distributed between 0 and 1, we have P(X1 < 1/2) = 1/2 and P(X1 ≥ 1/2) = 1/2.

If X1 < 1/2, then Y = 1, so E(Y | X1 < 1/2) = 1.

If X1 ≥ 1/2, then we need to roll the die until we get a number below X1. Since X1 is uniformly distributed between 1/2 and 1, the expected value of X1 is 3/4. Thus, by the memoryless property of the geometric distribution, the expected number of rolls needed to generate a number below X1 is 2. Therefore, E(Y | X1 ≥ 1/2) = 2.

Substituting these values into the formula for E(Y), we get:

E(Y) = (1/2) × 1 + (1/2) × 2 = 1.5

Therefore, the expected number of rolls needed to generate a number below 1/2 is 1.5, which is rounded to 2.

To learn more about expected number visit: https://brainly.com/question/23915989

#SPJ11

According to current fiscal policy theory, the best decision to help end a recession in the United States would be to increase government spending. This is based on the Keynesian theory that during a recession, there is a lack of aggregate demand in the economy, and government spending can help stimulate demand and encourage economic growth.

By increasing government spending on infrastructure, education, and other public services, it can create jobs, increase consumer spending, and boost economic activity. Additionally, the government can also implement tax cuts, which can give consumers more disposable income to spend and also stimulate demand.

However, it's important to note that the effectiveness of fiscal policy in ending a recession can be influenced by various factors such as the magnitude of the recession, the timing of the policy implementation, and the government's ability to finance the policy measures. Therefore, policymakers need to carefully consider all of these factors and adjust their decisions accordingly.
According to current fiscal policy theory, the best decision to help end a recession in the United States would involve implementing expansionary fiscal measures. This typically includes increasing government spending, cutting taxes, or a combination of both, which in turn stimulates economic activity and growth.

Expansionary fiscal policy works by injecting more money into the economy, which increases aggregate demand. This leads to higher levels of output and employment, eventually helping to alleviate the negative effects of a recession. Increased government spending can come in various forms, such as investments in infrastructure, public services, or direct financial assistance to individuals and businesses. Tax cuts provide more disposable income for consumers and lower costs for businesses, promoting spending and investment.

To implement these decisions, policymakers need to consider various factors, such as the severity of the recession, the level of public debt, and the effectiveness of specific fiscal measures in achieving the desired outcomes. It is essential to strike the right balance to avoid causing inflation or exacerbating long-term fiscal imbalances.

In conclusion, current fiscal policy theory suggests that the best decision to help end a recession in the United States involves implementing expansionary fiscal measures, such as increasing government spending and cutting taxes. These actions stimulate economic growth and alleviate the negative impacts of a recession, ultimately contributing to economic recovery.

Learn more about investments at : brainly.com/question/14682309

#SPJ11

Answer:

Step-by-step explanation:

5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%5.3%uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

uestion

A square with sides measuring 5 millimeters each is drawn within the figure shown. A point within the figure is randomly selected.

What is the approximate probability that the randomly selected point will lie inside the square?

5.3%

8.4%

13.3%

18.1%

The standard deviation may or may not be dependent, as it depends on the nature of the data being analyzed.

When using a dependent samples t-test, the sample consists of two related groups that are being compared to each other.

Therefore, it is not true that there is only one mean or that the sample consists of only one group.

Additionally, the standard deviation may or may not be dependent, as it depends on the nature of the data being analyzed.

Learn more about standard deviation,

https://brainly.com/question/24298037

#SPJ11

The probability that x is in the interval (Mx + 20x) is 0.0000.

To calculate the mean (Hy), variance (o^2), and standard deviation (Ox) of the binomial distribution, we use the following formulas:

Hy = np = 5 * 0.12 = 0.6

o^2 = npq = 5 * 0.12 * 0.88 = 0.528

Ox = sqrt(o^2) = sqrt(0.528) = 0.72

These formulas give the same results as the ones given in the section

To calculate the interval (Mx + 20x), we first need to find the values of Mx and Ox:

Mx = Hy + 20 * Ox = 0.6 + 20 * 0.727 = 15.14

Ox = sqrt(o^2) = 0.727

The interval is therefore [15.14 - 0.727, 15.14 + 0.727] = [14.413, 15.867]

To find the probability that x is in this interval, we need to sum the probabilities of the values of x that fall within the interval:

P(14 ≤ x ≤ 15) = p(0) + p(1) + p(2) + p(3) + p(4) = 0.3598 + 0.0009 + 0.0981 + 0.0134 + 0.5277 = 1.0000

Rounding up 14.413 to 15 and rounding down 15.867 to 15, we get the same interval [15, 15] and the probability that x is in this interval is P(15) = p(5) = 0.0000.

Therefore, the probability that x is in the interval (Mx + 20x) is 0.0000.

To learn more about rounding visit:

https://brainly.com/question/29878750

#SPJ11

P(T < 50) = 0.3202 * 0.5 + 0.102 * 0.5 = 0.2111

Finally, substituting all these values into Bayes' theorem, we get:

P(T < 50 | T = 50 or 75) = 0

a) To solve this problem, we need to use the properties of the lognormal distribution. Specifically, we know that if T is a lognormal distribution with mean μ and coefficient of variation σ, then ln(T) has a normal distribution with mean ln(μ) and standard deviation σ.

Using this, we can standardize the distribution of ln(T) as follows:

z = (ln(50) - ln(75)) / (0.4 * ln(10))

where ln(10) is the natural logarithm of 10.

We can then use a standard normal distribution table (or a calculator) to find the probability that z is less than or equal to this value.

P(T < 50) = P(ln(T) < ln(50)) = P(z < -0.468) = 0.3202

Therefore, the probability of an earthquake occurring in the next 50 years is approximately 0.3202.

b) Similarly, to find the probability of an earthquake occurring in the next 50 years given that the last earthquake occurred 75 years ago, we standardize the distribution of ln(T) using:

z = (ln(50) - ln(75)) / (0.4 * ln(10))

But this time, we need to adjust the mean by subtracting ln(75) and adding ln(75+75) = ln(150) to account for the time since the last earthquake.

z = (ln(50) - ln(75+75)) / (0.4 * ln(10)) = -1.272

Again, using a standard normal distribution table (or calculator), we find that:

P(T < 50 | T = 75) = P(ln(T) < ln(50) | ln(T) = ln(75)) = P(z < -1.272) = 0.102

Therefore, the probability of an earthquake occurring in the next 50 years given that the last earthquake occurred 75 years ago is approximately 0.102.

c) To find the probability of an earthquake occurring in the next 50 years, given that the last earthquake occurred either 50 or 75 years ago with equal probability, we need to use Bayes' theorem:

P(T < 50 | T = 50 or 75) = P(T = 50 or 75 | T < 50) * P(T < 50) / P(T = 50 or 75)

where P(T = 50 or 75) = 0.5 (since the two cases are equally likely).

To find P(T = 50 or 75 | T < 50), we can use the law of total probability:

P(T < 50) = P(T < 50 | T = 50) * P(T = 50) + P(T < 50 | T = 75) * P(T = 75)

where P(T = 50) = P(T = 75) = 0.5 (since the two cases are equally likely).

From parts a) and b), we know that:

P(T < 50 | T = 50) = 0.3202

P(T < 50 | T = 75) = 0.102

Substituting these values, we get

P(T < 50) = 0.3202 * 0.5 + 0.102 * 0.5 = 0.2111

Finally, substituting all these values into Bayes' theorem, we get:

P(T < 50 | T = 50 or 75) = 0

To learn more about distribution visit:

https://brainly.com/question/29731222

#SPJ11