Condensation happens more quickly when water vapour is made colder. The rate of condensation increases as the amount of water vapour in the air increases.
Is condensation causing an increase or decrease in temperature?When condensation takes place, the latent heat of condensation that is provided to the air is released by the water vapour that is already there. The temperature of the air rises as a result of the heat being absorbed.
Does a warmer environment result in greater condensation?Condensation happens at higher temperatures in humid environments. Despite relatively low humidity, condensation happens when it's cold outside. Condensation forms on windows and doors due to the temperature differential between the environment, whether interior or exterior, and the glass.
To know more about Condensation visit:-
brainly.com/question/11516584
#SPJ1
Question 16
Identify if the following reaction is balanced or not balanced: BF3 + Li₂SO3 →→ B₂(SO3)3 + LIF
(A) Balanced
B) Not Balanced
compare simple feedback to feedforward control configuration. which one you trust to perform better in achieving your control objective? Why?
Choice between feedback and feedforward control depends on the specific application and control objective. In many cases, a combination of both feedback and feedforward control may be used to achieve the desired performance and reliability.
What is Configuration?
In general, the term "configuration" refers to the arrangement or structure of components in a system or device. It can refer to the physical arrangement of hardware components or the logical arrangement of software components, as well as the settings and options that determine the behavior of a system or device.
In the context of control systems, "configuration" may refer specifically to the arrangement of sensors, actuators, and controllers used to achieve a desired control objective. This can include the physical placement of sensors and actuators within a system, as well as the software configuration of control algorithms and feedback mechanisms.
Both feedback and feedforward control are important types of control systems used to achieve a desired control objective. In simple feedback control, the control system measures the output of a system and adjusts the input accordingly to maintain a desired setpoint. In feedforward control, the control system predicts the output of a system based on known inputs and adjusts the input accordingly to achieve a desired output.
Learn more about Configuration from given link
https://brainly.com/question/26084288
#SPJ1
WILL GIVE BRAINLIEST
ANSWER QUESTION IN PICTURE
Answer:
0.635 grams
Explanation:
Given balanced chemical equation:
[tex]\large\boxed{\rm Cu+2AgNO_3 \rightarrow 2Ag+Cu(NO_3)_2}[/tex]
Molar massesCopper (Cu) = 63.546 g/molSilver (Ag) = 107.868 g/molNitrogen (N) = 14.007 g/molOxygen (O) = 15.999 g/molTherefore, the molar mass of Silver Nitrate (AgNO₃) is:
[tex]\rm AgNO_3=107.868+14.007+(3 \cdot 15.999)=169.872\;g/mol[/tex]
Calculate the moles of each reactant by dividing the given mass by the molar mass:
[tex]\rm Moles\;of\;Cu=\dfrac{5.00\;g}{63.55\;g/mol}\approx 0.0787\;mol\;(3\;s.f.)[/tex]
[tex]\rm Moles\;of\;AgNO_3=\dfrac{1.00\;g}{169.872 \;g/mol}\approx 0.00589\;mol\;(3\;s.f.)[/tex]
Silver nitrate (AgNO₃) is the limiting reactant since we have fewer moles of it.
From the balanced equation, 2 moles of AgNO₃ produces 2 moles of Ag. Therefore, the number of moles of Ag produced is:
[tex]\rm 0.00589 \;mol\;AgNO_3 \times \dfrac{2 \;mol\; Ag}{2 \;mol \;AgNO_3} =0.00589 \;mol\;Ag[/tex]
Calculate the mass of Ag by multiplying the number of moles by the molar mass of Ag:
[tex]\begin{aligned} \rm Mass\;of\;Ag&=\rm 0.00589\; mol \times 107.868\; g/mol\\&=\rm 0.635\; g\;(3\;s.f.)\end{aligned}[/tex]
Therefore, 0.635 grams of Ag will be produced from 5.00 g of Cu and 1.00 g of AgNO₃.
Balancing chemical equations with interfering coefficients
Balance the chemical equation below using the smallest possible whole number stoichiometric coefficients.
CH,(CH,) ,CH,(0) +O,(g) →+ CO,(g) + H,O(g)
0-0
00
The balanced chemical equation is: C3H8 + 5O2 → 3CO2 + 4H2O
When balancing chemical equations, can only the coefficients be changed, not the subscripts, the number in front of each reactant or product?Chemical equations may only be balanced by changing the coefficients; subscripts cannot be changed. The ratios of the atoms in the molecule and the resulting chemical characteristics alter when subscripts are changed.
First, let's balance the carbon and hydrogen atoms by placing a coefficient of 3 in front of CO2 and 4 in front of H2O:
C3H8 + 5O2 → 3CO2 + 4H2O
Now, let's balance the oxygen atoms by placing a coefficient of 5 in front of O2:
C3H8 + 5O2 → 3CO2 + 4H2O
The equation is now balanced with coefficients of 1, 5, 3, and 4, respectively.
To know more about atoms visit:-
https://brainly.com/question/30898688
#SPJ1
Fungi associated with greenhouse tomatoes and their management project work
A fungus, is responsible for grey mould (Botrytis cinerea). It affects tomato plants (and other plants) in greenhouses and fields and is a frequent and frequently serious fungal disease.
What is the short definition of a greenhouse?A structure with glass roof and walls is known as a greenhouse. Tropical flowers and tomatoes are among the plants that are grown in greenhouses. Even in the winter, a greenhouse keeps a comfortable temperature inside. Sunlight enters the greenhouse during the day and heats the air and plants within.
Why do greenhouses cause issues?The industry contributes considerably to climate change by emitting more than 3.3 million tonnes of greenhouse gases each year. In general, building greenhouses pollutes the environment and has negative effects. Construction sites contribute to contamination of the air, water, soil, and noise.
To know more about greenhouses visit-
https://brainly.com/question/2491116
#SPJ1
What can happen to a supersaturated solution
Crystals will precipitate out of a supersaturated solution when it is disturbed. At that point, the solution will be saturated, making it impossible to dissolve any additional crystals.
What happens if you heat a supersaturated solution?A saturated solution becomes unsaturated when heated because the solute becomes more soluble. Since the intermolecular space between the particles expands when a saturated solution is heated because the kinetic energy increases.
What consequences does supersaturation have?Rapid nucleation creates a significant quantity of nucleus surface area on which growth takes place at high supersaturations. As a result, when large supersaturations are obtained, the growth rate is also rapid, which causes the desupersaturation to occur more quickly.
To learn more about supersaturated solution visit:
brainly.com/question/16817894
#SPJ1
Which of the following compounds has the largest lattice energy?
NaCl
RbCl
CaCl2
MgCl2
Thank you :)
The chemical MgCl2 has the highest lattice energy of the ones listed. This occurs as a result of the Mg2+ ion's greater charge density compared to the Na+, Rb+, and Ca2+ ions.
Which chemical has the highest lattice energy?More lattice energy results from smaller ions, stronger charges, and larger charges. AlN has the highest lattice energy as a result.
What generates more lattice energy?Higher charged ions and closer spaced ions have higher lattice energies. The Born-Haber cycle, which incorporates all of the energy stages required to transform elements into an ionic molecule, is frequently used to compute lattice energies.
To know more about lattice energy visit:-
https://brainly.com/question/18222315
#SPJ1
2KClO3 → 2KCl + 3O2
How many moles of potassium chloride, KCl, are produced by the decomposition of 7.6 moles of potassium chlorate, KClO3?
Answer:
From the balanced chemical equation, 2 moles of KClO3 produce 2 moles of KCl. Therefore, 1 mole of KClO3 will produce 1 mole of KCl.
So, 7.6 moles of KClO3 will produce 7.6 moles of KCl.
Explanation:
1. Predict the molecular structure and bond angles for XeCl2. Approximate bond angles are sufficient.
2. Predict the molecular structure and bond angles for ICl3. Approximate bond angles are sufficient.
XeCl2 has a linear molecular geometry. The Xe-Cl bond angle is 180 degrees. Xe is the central atom, and it has two lone pairs of electrons and two bonded chlorine atoms.
ICl3 has a trigonal bipyramidal molecular geometry. The I-Cl bond angle in the equatorial positions is 120 degrees, and the I-Cl bond angle in the axial position is 180 degrees. The I atom is the central atom, and it has two lone pairs of electrons and three bonded chlorine atoms.
XeCl2 has a linear molecular geometry, with bond angles of 180 degrees. The Xe atom is at the center, with two Cl atoms attached to it. The molecule has two lone pairs on the Xe atom, which repel the bonding electron pairs, causing them to be farther apart and producing a linear shape.
ICl3 has a trigonal bipyramidal molecular geometry, with bond angles of approximately 90 degrees and 180 degrees. The I atom is at the center, with three Cl atoms attached to it in a trigonal planar arrangement, and two lone pairs on the I atom occupy two of the axial positions. The repulsion between the bonding and nonbonding electron pairs cause the bond angles to deviate from the ideal angles.
To know more about molecular geometry, visit :
https://brainly.com/question/7558603
#SPJ1
All voltmeters have two probes attached to make a measurement explain why you cannot make a voltmeter with a single probe to measure the voltage of a wire
As voltages is a potential in relation to a reference, one probe must be on the reference or "zero" planes and the other must be on the point being measured.
Why does a voltmeter not accurately read voltage?because the voltmeter uses some of the main circuit's current. Main present in the circuit diminishes as a result, and the voltmeter's reading of the potential difference does not correspond to its true value.
Why are there two probes on a voltmeter?Nothing is measured at a specific point by the voltmeter. It gauges the voltage (V) differential between two circuit locations. Thus, a multimeter has two leads rather than one.
To know more about measured visit:
https://brainly.com/question/28370017
#SPJ1
What is t in Cell 3, 7 and 5, 8 with the correct units?
A healthy T cell count is defined as 500–1,600 T cells per cubic millimeter of blood (cells/mm3), according to HIV.gov.
What is t in Cell 3, 7 and 5, 8 with the correct units?In cell C1, enter a number, such as 5. Then type another number, such as 3, in D1. To begin the formula, enter an equal sign (=) in cell E1. Type C1+D1 after the equal sign.
The cell-permeant Cell Event TM Caspase-3/7 Green Detection Reagent is a four-amino acid peptide (DEVD) coupled to a nucleic acid-binding dye. The proteins caspase-3 and caspase-7 are active during apoptosis and are able to break the DEVD peptide's caspase 3/7 recognition sequence.
Learn more about T cell,
https://brainly.com/question/27459085
#SPJ1
We know that helium (He) will act more like neon (Ne) than beryllium (Be) Why is helium different than other elements with two valence electrons?
"Helium is different than other elements with two valence electrons, such as beryllium, because it has a full outer shell of electrons. Helium's electron configuration is 1s², which means its first energy level (or shell) is completely filled with two electrons. This makes helium extremely stable and unreactive with other elements, unlike beryllium, which has two valence electrons in an incomplete outer shell and is more reactive.
In contrast, neon (Ne) also has a full outer shell of electrons, but it has a larger number of electrons in total than helium. Neon's electron configuration is 1s² 2s² 2p⁶, meaning its second energy level is also filled, providing additional stability. Therefore, helium is more similar to neon in terms of its electron configuration and chemical behavior than it is to beryllium, which has a partially-filled outer shell and is more reactive." (ChatGPT, 2023)
What volume of gas could be collected over water when 3.64g of Potassium reacts with an excess amount of Nitric acid (HNO3)? The conditions under which the experiment was run include an atmospheric pressure of 1.01 atm and a water temperature of 24°C. This experiment produced 1.03 L of hydrogen gas. The vapor pressure of the water at 24°C is 0.0293 atm.
1. Show a balanced equation for this reaction.
2. Calculate the partial pressure of the hydrogen gas.
3. Calculate the number of moles of Potassium.
4. Calculate the number of moles of hydrogen.
5. Calculate the theoretical volume of the hydrogen gas.
6. Calculate the percent error.
The volume of nitrogen gas produced is 1.11 L according to the chemical equation for the interaction between potassium and nitric acid: 2K + 6HNO3 3H2O + 2KNO3 + NH4NO3.
At 25 C and 1 atm, what is the vapour pressure of water?The equilibrium vapour pressure of the material is this partial pressure of vapour in equilibrium above a liquid. Water has a vapour pressure of 0.0313 atm, or 23.8 mm of mercury, at ambient temperature (25 °C; 760 mm Hg = 1 atm).
The volume of nitrogen gas generated can be calculated using the ideal gas law: PV = nRT
To determine how many moles of hydrogen gas were generated:
PV = nRT
n = PV/RT
n = (1.01 atm - 0.0293 atm) * 1.03 L / (0.0821 L·atm/mol·K * 297 K)
n = 0.0392 mol
The balanced chemical equation states that 1 mole of nitrogen gas is created when 2 moles of potassium react. As a result, the amount of nitrogen gas generated is:
n(N2) = 0.5 * n(K)
n(N2) = 0.5 * 3.64 g / 39.10 g/mol
n(N2) = 0.0441 mol
The volume of nitrogen gas created can now be calculated using the ideal gas law once more:
PV = nRT
V = nRT/P
V = 0.0441 mol * 0.0821 L·atm/mol·K * 297 K / (1.01 atm - 0.0293 atm)
V = 1.11 L
To know more about equilibrium visit:-
https://brainly.com/question/28298112
#SPJ1
Calculate How many moles are in 125 g of water?
how do you Balance This equation (NH4)3PO4(aq)+MgCl2(aq)-Mg3(PO4)2(s)+NH4CL(aq)
Answer: To balance the equation (NH4)3PO4(aq) + MgCl2(aq) → Mg3(PO4)2(s) + NH4Cl(aq), you need to ensure that the number of atoms of each element is equal on both sides of the equation.
Start by counting the number of atoms of each element on both sides:
Left side: (NH4)3PO4(aq) + MgCl2(aq)
3 nitrogen atoms (N)
12 hydrogen atoms (H)
1 phosphorus atom (P)
4 oxygen atoms (O)
1 magnesium atom (Mg)
2 chlorine atoms (Cl)
Right side: Mg3(PO4)2(s) + NH4Cl(aq)
3 magnesium atoms (Mg)
2 phosphorus atoms (P)
8 oxygen atoms (O)
4 nitrogen atoms (N)
1 chlorine atom (Cl)
1 hydrogen atom (H)
The equation is not balanced as the number of atoms of some elements are not equal on both sides. To balance the equation, you can follow these steps:
Balance the number of nitrogen atoms by putting a coefficient of 3 in front of NH4Cl:
(NH4)3PO4(aq) + MgCl2(aq) → Mg3(PO4)2(s) + 3NH4Cl(aq)
Balance the number of hydrogen atoms by putting a coefficient of 12 in front of Mg3(PO4)2:
(NH4)3PO4(aq) + MgCl2(aq) → 3Mg3(PO4)2(s) + 3NH4Cl(aq)
Balance the number of chlorine atoms by putting a coefficient of 2 in front of MgCl2:
(NH4)3PO4(aq) + 2MgCl2(aq) → 3Mg3(PO4)2(s) + 3NH4Cl(aq)
The final balanced equation is:
(NH4)3PO4(aq) + 2MgCl2(aq) → 3Mg3(PO4)2(s) + 3NH4Cl(aq)
Brainliest is appericated this took me a while. (:
Explanation:
When societal demand for a synthetic material increases, the demand for the natural resources used to make the synthetic material also .......
Demand for the environmental assets utilized to produce a synthetic materials rises in tandem with that demand. Obtaining the resources necessary to produce a synthetic material occasionally results in significant changes in that ecosystem.
What kind of natural resources are employed in the production of synthetic materials?Natural resources like wood & sand are used to make "natural" items. Natural resources are also used to make "synthetic" products. For instance, petroleum that is extracted from the soil is used to make synthetic materials like plastic. Natural resources include petroleum.
What effects are there that the utilization of synthetic products have on the environment?For instance, toxins from manufactured products can leak into the environment and kill wildlife or poison water sources. Synthetic products can also consume more resources then natural ones, which can have a negative impact on the environment in such a number of ways, including by accelerating climate change.
To know more about synthetic materials visit:
https://brainly.com/question/17925097
#SPJ1
Given the analyte of Adipic acid with F=0.1 M and volume=0.01 L and 146.142 g/mol. Given Titrant NaOH=0.05 M. Given a titration curve where Pka1 is at 0.01 L titrant added with a ph of 4.43 and Pka2 is at 0.03 L titrant added with a PH of 5.41. Given the first equivalence point is at 0.02 L titrant added and the second equivalence point is at 0.04 L added. Find the PH values when titrant added=0, at equivalence point 1(0.02 L added), at 0.037 L titrant added, and at equivalence point 2(0.04 L added)
Using the Henderson-Hasselbalch equation, the pH value when no titrant is added is 4.44.
What is the pH of the Adipic solution?To solve this problem, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])where;
pH is the pH value,pKa is the acid dissociation constant,[A-] is the concentration of the conjugate base, and[HA] is the concentration of the acid.We can use this equation to calculate the pH values at different points during the titration.
When no titrant is added:
At this point, we have only the adipic acid in the solution, so we can use the equation:
pH = pKa + log([A-]/[HA])
pH = pKa + log(0/0.1)
pH = pKa = 4.44
pH = 4.44
The other pH values are obtained similarly using the Henderson-Hasselbalch equation.
Learn more about pH and Henderson-Hasselbalch equation at: https://brainly.com/question/13423434
#SPJ1
What is the half‑life of an isotope that decays to 12.5% of its original activity in 64.9 h?
Answer:
The half-life of an isotope is the time taken for half of the original activity to decay.
We know that the isotope decays to 12.5% of its original activity. So, the fraction of the original activity remaining is:
0.125 = 1/2^3
This means that the isotope has undergone three half-lives.
The time taken for three half-lives is:
3 x half-life = 3 x 64.9 h = 194.7 h
Therefore, the half-life of the isotope is:
time/half-life = number of half-lives
64.9 h/half-life = 1
194.7 h/half-life = 3
Solving for half-life:
64.9 h/half-life = 1
half-life = 64.9 h
Therefore, the half-life of the isotope is 64.9 hours.
Find Δ, , , and Δ for the freezing of water at −30.00 °C. The specific heat of ice is 2.087 Jg·°C and its heat of fusion is −333.6 J/g.
Δ=
J/g
=
J/g
=
J/g
Δ=
J/g
The total energy involved in the freezing of water at -30°C is calculated in two steps: one for the temperature change from -30°C to 0°C, and the other for the phase change from water to ice. The energies are calculated separately and then added together, yielding a final energy of -271 J/g.
Explanation:The question pertains to the calculation of energy (Δ) for the freezing of water at -30°C. In this case, we are dealing with the energy required to heat ice from -30°C to 0°C (temperature change), and the energy required to convert the ice at 0°C to water at 0°C (phase change).
Let's call the first q1, which can be calculated using the formula q = mcΔt, where 'm' stands for mass (let's consider 1 gram for simplicity), 'c' is the specific heat capacity of ice (2.087 Jg·°C), and ' Δt' is the temperature change (30°C). Plugging in these values, we get q1 = 2.087*30 = 62.61 J.
Now, the second energy q2 is calculated using the formula q=ml, where ' l' is the heat of fusion (-333.6 J/g). Here q2 = -333.6*1 = -333.6 J (negative implies energy is removed).
Finally, to find the overall energy for the phase change, we add the calculated energies together. So, Δ = q1 + q2 = 62.61 - 333.6 = -271 J/g (using energy conservation principles).
Learn more about Energy Calculation here:https://brainly.com/question/35562164
#SPJ2
For all the reactions, identify the reaction type and name the products formed.
1) How would you prepare ethoxyethane from ethene? Provide equations/reactions
2) How would you prepare propanoic acid from prop-1-ene? Provide equations/reactions
3) Place the following organic molecules in order of increasing boiling points: butane, butan-2-one, butanoic acid, and butan-2-ol. Justify your answer.
Answer:
1) Ethoxyethane can be prepared from ethene by the reaction of ethene with ethanol in the presence of a catalyst such as sulfuric acid. This is an example of an addition reaction.
Equation:
C2H4 + C2H5OH → C4H10O (ethoxyethane)
2) Propanoic acid can be prepared from prop-1-ene by the reaction of prop-1-ene with potassium permanganate (KMnO4) in the presence of water. This is an example of an oxidation reaction.
Equation:
CH2=CHCH3 + 2KMnO4 + 3H2O → CH3CH2COOH (propanoic acid) + 2MnO2 + 2KOH
3) The order of increasing boiling points is: butane < butan-2-ol < butan-2-one < butanoic acid.
Butane is a nonpolar molecule and has only weak London dispersion forces between its molecules, so it has the lowest boiling point.
Butan-2-ol has a polar hydroxyl group (-OH) which allows for hydrogen bonding between its molecules, increasing its boiling point compared to butane.
Butan-2-one has a polar carbonyl group (C=O) which also allows for dipole-dipole interactions between its molecules, increasing its boiling point compared to butan-2-ol.
Butanoic acid has a polar carboxyl group (-COOH) which allows for hydrogen bonding between its molecules, making it the most polar and highest boiling compound among the given options.
What mass of oxygen combines with 2.88 mol
of magnesium in the reaction
2 Mg(s) + O2(g) −→ 2 MgO(s)?
Answer in units of g.
Answer:
46.08 g of O2
Explanation:
The balanced chemical equation for the reaction shows that 1 mol of O2 reacts with 2 mol of Mg to form 2 mol of MgO.
Therefore, to calculate the mass of O2 that reacts with 2.88 mol of Mg, we need to use the mole ratio between Mg and O2.
Mole ratio of Mg to O2 is 2:1, meaning that for every 2 moles of Mg, 1 mole of O2 reacts.
So, for 2.88 mol of Mg, we need 1.44 mol of O2 (2.88 mol Mg x 1 mol O2 / 2 mol Mg).
The molar mass of O2 is 32 g/mol.
Therefore, the mass of O2 needed is:
mass = number of moles x molar mass = 1.44 mol x 32 g/mol = 46.08 g.
Therefore, 46.08 g of O2 is needed to react with 2.88 mol of Mg.
Which of the following best explains why electrometallurgy is a useful process in many industries?
Electrometallurgy can etch permanent marks and designs into the surfaces of metal products.
Electrometallurgy can create a thin film around metals, preventing rusting and other forms of corrosion.
Electrometallurgy can refine a wide range of impure metals used in manufacturing, wiring, and many other applications.
Electrometallurgy can split water molecules into a cheap source of oxygen gas that can be carried into space and beneath the ocean.
Many impure metals in use in manufacturing, wiring, as well as other applications can be refined by electrometallurgy.
Describe electrometallurgy in detail?The term "electrometallurgy" refers to a range of technologies used to separate metals from solutions, such as molten salt solutions, or to refine metals through electrochemical dissolution into or deposition out of such solutions.
What is electrometallurgy so crucial?An important area of metallurgy called electrometallurgy makes use of electricity to refine crude metals acquired by pyrometallurgy, hydrometallurgy, and electrometallurgy as well as to extract metals from leach liquors.
To know more about electrometallurgy visit:
https://brainly.com/question/28303713
#SPJ1
how many grams of KClO3 are needed to produce 6.5g of KCl?
We need 10.7 g of KClO3 to produce 6.5 g of KCl. Protons and neutrons have approximately the same mass, which is about 1 amu, so the atomic mass of an element is roughly the sum of the number of protons and neutrons in its nucleus.
What is Atomic Mass?
Atomic mass is the mass of an atom of a chemical element. It is usually expressed in atomic mass units (amu) or in grams per mole (g/mol). The atomic mass of an element is determined by the number of protons and neutrons in the nucleus of an atom.
The balanced chemical equation for the reaction of KClO3 producing KCl is:
2KClO3 → 2KCl + 3O2
We can see from the equation that 2 moles of KClO3 produce 2 moles of KCl. We need to calculate how many moles of KCl are produced from 6.5g of KCl, and then use the mole ratio to find the amount of KClO3 needed.
First, we need to convert the mass of KCl to moles:
moles of KCl = mass of KCl / molar mass of KCl
= 6.5g / 74.55 g/mol
= 0.0872 mol
From the balanced equation, we know that 2 moles of KClO3 produce 2 moles of KCl. Therefore, to find the moles of KClO3 needed to produce 0.0872 mol of KCl, we can use the following proportion:
2 mol KClO3 / 2 mol KCl = x mol KClO3 / 0.0872 mol KCl
Solving for x, we get:
x = 0.0872 mol KClO3 x (2 mol KClO3 / 2 mol KCl)
= 0.0872 mol KClO3
Finally, we can convert the moles of KClO3 to grams using its molar mass:
mass of KClO3 = moles of KClO3 x molar mass of KClO3
= 0.0872 mol x 122.55 g/mol
= 10.7 g
Learn more about Atomic Mass from the given link
https://brainly.com/question/30390726
#SPJ1
I need help with this question please this is non graded thanks
Experimental data for a 1.00 m Mgl₂ aqueous
solution indicate an actual change in the freezing
point of water of -4.78°C. Find the expected
change in the freezing point of water. Suggest a
possible reason for the discrepancy between the
experimental and expected values.
Answer:
The expected change in freezing point of water can be calculated using the formula:
ΔTf = Kf x molality
Where ΔTf is the change in freezing point, Kf is the freezing point depression constant for water (1.86°C/m), and molality is the molal concentration of the solute (mol of solute/kg of solvent).
Assuming complete dissociation of MgCl2 in water, the molality of the solution can be calculated as:
molality = (1.00 mol MgCl2 / 0.1 kg H2O) = 10.0 mol/kg
Substituting the values into the equation, we get:
ΔTf = (1.86°C/m) x (10.0 mol/kg) = -18.6°C
Therefore, the expected change in the freezing point of water for a 1.00 m MgCl2 solution is -18.6°C.
please look at screenshot question is there
The calculated molarity of Br is 0.0093 mol/L. Molarity is the number of moles of solute per one liter of solution
Elaborating:Mol FeBr2 = mass / molar mass
= 0.30 g / 215.65 g/mol
= 0.00139 mol
Each mol FeBr2 has two mol Br- anions , so mol Br- ions here will be :
= 2 x 0.00139 mol
= 0.00278 mol
Molarity of Br- anions = mol / volume (L)
= 0.00278 mol / 0.300 L
= 0.0093 mol/L
How can I determine molarity?
Molarity (M) is the most common way to describe the concentration of a solution. Molarity is calculated by dividing the volume of the solution in liters by the molecular weight of the solute: M is equal to moles of solute per liter of solution.
For what reason do we utilize molarity?One of the most common units used to measure a solution's concentration is molarity. A solution's molarity is useful because it tells you not only whether it has been diluted or concentrated, but also its actual concentration.
Learn more about molarity:
brainly.com/question/30404105
#SPJ1
CAN SOMEONE HELP WITH THIS QUESTION?✨
- If a student weighs out 0.614 g of KHP and titrates it with hydroxide solution, what is the molarity of the sodium hydroxide solution if it takes 35.01 mL of it to titrate the KHP?
A primary standard for figuring out the concentration of a sodium hydroxide (NaOH) solution is KHP (potassium hydrogen phthalate). The NaOH solution has a molarity of 0.0859 M.
How do you determine the sodium hydroxide solution's molarity?For the reaction between KHP and NaOH, the following chemical equation is balanced:
NaKP + H2O → KHP + NaOH
We can see from the equation that it is balanced that one mole of KHP reacts with one mole of NaOH.
KHP mass divided by its molar mass yields moles of KHP.
0.003007 moles of KHP are equal to 0.614 g/204.22 g/mol.
NaOH volume is 35.01 mL, or 0.03501 L.
Molarity of NaOH is equal to moles of NaOH divided by its volume.
NaOH has a molarity of 0.003007 mol/0.0351 L, or 0.0859 M.
To learn more about molarity visit:
brainly.com/question/8732513
#SPJ1
a 10 mole solution of nitric acid is made from 315 g of HNO3 what volume of water is required to make the acid
We obtain a 10 moles/L = 10 M remedy by boiling 5 mole of HNO3 into 0.5 L of water. Hence, to create a 10 M solution, 315 g of HNO3 must be dissolved in 0,5 L of water.
What are the four sorts of moles?Moles come in four different categories: acquired nevi, spitz nevi, dysplastic nevi, and congenital moles. Below are some distinctions between each.
Why causes moles to come out of nowhere?Why moles suddenly arise later in life is unknown to researchers. The majority of those that do are benign and most likely result from aging, prescription drug use, burns or prolonged sun exposure, as well as genetic abnormalities. Every mole that develops and seems unusually can raise suspicions. More recent lesions are much more likely to grow into cancer.
To know more about moles visit:
https://brainly.com/question/26416088
#SPJ1
If water is added to 1 mole of sodium chloride in a flask until the solution is 1 liter what is the molarity of the solution? What is the molarity when water is added to 2 moles of sodium chloride to make 0.5 liters?
When water is added to 2 moles of sodium chloride to make 0.5 liters, the molarity is 4M.
1. The molarity of a solution is 1 M when 1 mole of sodium chloride is dissolved in 1 liter of water. This is because molarity is defined as the number of molecules of a solute (in this case, sodium chloride) added to the liter of treatment solution. The molarity is 1 M because we have 1 mole of sodium chloride in 1 liter of solution.
2. The molarity of a solution is 4 M when 2 moles of sodium chloride are dissolved in 0.5 liters of water. This is because we have twice as many moles of sodium chloride as in the previous case but only half the volume of water. As a result, the concentration of sodium chloride in the solution is doubled, resulting in a molarity of 4 M.
Mathematically, we can calculate the molarity as follows:
Molarity = the number of moles of solution mass in liters.
In this case, we have 2 moles of Sodium chloride, and its mass is 0.5 liters:
Molarity = 2 moles / 0.5 liters = 4 M
Learn more about molarity:
https://brainly.com/question/30404105
How many H atoms are there in 0.510 moles of H
Answer:
No. of H atoms in 0.51 moles of H+ = 3.0713 * 10^23 atom
Explanation:
according to the definition of mole which states that the mole is the unit of amount of substance that equals Avogadro's number"Na = 6.022 * 10^23" (i.e. one mole of O2 contains 1Na of molecules, one mole of Ca = 1Na of atoms )
So
the number of atoms in 0.51 moles of H = 0.51 * 6.022 * 10^23 = 3.0713 * 10^23 atom