Answer: The motions shifts.
While spending the weekend in your cabin, you burn wood in your pot-bellied stove to heat a kettle of water for tea.
Answer the following questions for 2 points each:
1. What type of energy does the wood have in this situation. Explain your answer.
2. What type of energy is this transformed into as the wood it burned in the stove. Explain your answer.
3. What type of heat transfer is being used to warm the kettle of water? Why does the water eventually boil?
Answer: 1 = Heat
2=gas
3=it gets hot enough to boil because the metal conducts the heat into the water to heat it up and eventually boil.
Explanation: its common sense
5. Describe the trip from your home to school using the words
position, distance, displacement, and speed.
My commute to school is a constant distance, but the time it takes to get there fluctuates owing to traffic.
What is displacement?If an object moves with respect to a reference frame, such as when a passenger travels to the back of an airliner or a professor moves to the right with respect to a whiteboard, the item's position changes.
This change in location is described as displacement.
My commute to school is a constant distance, but the time it takes to get there fluctuates owing to traffic,
The initial and the final position of the commute is the same, but the displacement varies with the route which affects my car's speed and where it is in line at stop lights.
Learn more about displacement here, refer to the link;
https://brainly.com/question/10919017
#SPJ2
How much time is required for a 20 Coulombs charge to flow through a point if the current is 2 amperes? help plzzzzz
The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
t is the time is required
q is the charge = 20 Coulombs
I is the current is= 2 amperes
The formulas for the elctric current are given as;
[tex]\rm I = \frac{q}{t} \\\\\ \rm t = \frac{q}{I} \\\\ \rm t = \frac{20}{2} \\\\ t=10 \ sec[/tex]
Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
To learn more about the electric current refer to the link;
https://brainly.com/question/2264542
The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
t is the time is required
q is the charge = 20 Coulombs
I is the current is= 2 amperes
The formulas for the electric current are given as;
[tex]I=\dfrac{q}{t}[/tex]
[tex]t=\dfrac{q}{I}[/tex]
[tex]t=\dfrac{20}{2}[/tex]
[tex]t=10 sec[/tex]
Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
To learn more about the electric current refer to the link;
brainly.com/question/2264542
A student hangs the south pole of a bar magnet near the north pole of
another hanging bar magnet. What do the magnets do?
A. They move away from each other.
B. They move away from each other, then toward each other.
C. They move toward each other.
O D. They do not move.
When the south pole of a bar magnet is near the north pole of another bar magnet, they move toward each other. Therefore, option (C) is correct.
What is a magnet?A magnet can be described as a substance that creates a magnetic field and this magnetic field is the reason for the considerable properties of a magnet. The magnetic force pulls ferromagnetic materials, such as iron, cobalt, etc., and attracts or repels other magnetic substances.
A permanent magnet is composed of a material that is magnetized and produces its own magnetic field such material can be magnetized, and strongly attracted towards a magnet, is known as ferromagnetic, and contain the elements iron, and cobalt.
Each bar magnet possesses a set of North and South poles within them. The south pole of one magnet brings closer to the north pole of another magnet they attract each other and move toward each other.
Learn more about the magnet, here:
brainly.com/question/2841288
#SPJ5
what is the number of significant digits in the measurement 10.005m?
calculate the value of net force acting on given body?5N acting towards right & 15N force acting towards left on the brick.(draw fbd)
please help!!!!!
Answer:
-10N to the left.
Explanation:
The net force on a body is the single force that represent all the forces acting on a body.
Let the right direction be positive
Let the left direction be negative
Force acting to the right = 5N
Force acting to the left = -15N
Net force = 5N + (-15N) = -10N
The net force will be directed -10N to the left.
An object has a coefficient of kinetic friction of 0.2 and a normal force of 30N. Find the force of kinetic friction.
Answer:
Force of kinetic friction, Fk = 6N
Explanation:
Given the following data;
Coefficient of kinetic friction, μ = 0.2
Normal force, Fn=30N
To find the Force of kinetic friction;
Mathematically, the force of kinetic friction is given by the formula;
Fk = μFn
Where;
Fk represents the force of kinetic friction. μ represents the coefficient of friction. Fn represents the normal force.Substituting into the equation, we have;
Fk = 0.2*30
Fk = 6N
Therefore, the force of kinetic friction is 6N.
A force that is present between two moving objects or surfaces is called kinetic friction. It is estimated in newtons (N) and is calculated by:
[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]
Where, [tex]\rm F_{k}[/tex] = frictional force, [tex]\mu _{\rm k}[/tex] = coefficient, [tex]\rm F_{n}[/tex] = normal force.
The kinetic friction of the object is 6N.
The kinetic friction can be estimated as:
Given,
Coefficient of kinetic friction ([tex]\mu[/tex]) = 0.2Normal force [tex]\rm F_{n}[/tex] = 30 NSubstituting values in the formula:
[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]
[tex]\begin{aligned}\rm F_{k} &= 0.2 \times 30\\\\\rm F_{k} &= 6 \rm N\end{aligned}[/tex]
Therefore, 6N is the frictional force.
To learn more about frictional force follow the link:
https://brainly.com/question/1714663
Importance of measurement
Answer:
Without the ability to measure, it would be difficult for scientists to conduct experiments or form theories. Not only is measurement important in science and the chemical industry, but it is also essential in farming, engineering, construction, manufacturing, commerce, and numerous other occupations and activities.
Explanation:
Make sure to edit so you're not copy-writed and if this was helpful could I please get brain-list
anybody got any answers???
Answer:
b? to a?
Explanation:
It converts mechanical energy to electrical.
Therefore, Option A is the correct answer
Why are recessive traits not seen even though they are present in the alleles?
Answer:
Explanation:. The vending machine holds 10 bags of pretzels and 8 packs of cheese crackers. Both the pretzels and crackers dispenseat 2 bags per hour. How many hours will elapse when there is the same number of snacks remaining in the vending machine? How many of each item will there be at this point?Equation1______________________________Equation2_______________________________Hours: ___________________________ Items: ____________________________What does each equation have n common? ______________________How does this affect the solution?
A horse accelerates from rest for 1 s and covers a distance D. If instead the accelerates from rest with the same accelerations for 2 s will the distance it covers be equal to 2D, 4D, or 9D
Answer:
4D
Explanation:
We will use 2nd equation of motion in this question:
s = Vi t + (0.5)gt²
where,
s = distance covered
t = time taken
g = acceleration due to gravity
For t = 1 s:
s = D
Therefore,
D = (0 m/s)(1 s) + (0.5)g(1 s)²
D = 0.5g -------------- equation (1)
For t = 2 s:
s = D
Therefore,
s = (0 m/s)(1 s) + (0.5)g(2 s)²
s = 0.5g(4)
using equation (1):
s = 4D
therefore, correct answer is:
4D
HELPP!! Does anybody have the answer key to Lab Report: Conservation of Linear Momentum for my online class for physics?? WILL GIVE 80points
Answer:
Try copy and pasting the intructions it into google, and it should pop up if it exists.
Hope this helps.
Explanation:
Answer:
Send me the download of the lab and I will complete it for you
What are gears and what is a lever ?
Answer:
agear lever or agear stick is the lever that you use to change gear in acar or other vehicle
A 3 kg rubber block is resting on wet concrete. The coefficient of static friction is 0.3. What is the minimum force that must be applied to the block to make the block begin to accelerate?
Answer:
You would have to find the friction force of the rubber block which would be found with the equation of Normal force (mass*gravity) times cooeficient of friction which would give 8.82 N for the amount of friction and because you need more force than 8.82 N (assuming gravity is 9.8)
We need to find the frictional force of the rubber block. This is the normal force (mass × gravity) multiplied by the coefficient of friction, which gives us a friction quantity of 8.82N. This is because it requires a force greater than 8.82N (Gravity is 9.8)
What is coefficient of friction?Mathematically, = F/N, where F represents the frictional force and N represents the normal force. Because F and N are both measured in force units (such as Newtons or Pounds), the coefficient of friction is dimensionless.The friction coefficient is the ratio of the frictional force resisting movement of two contacting surfaces to the normal force pushing the two surfaces together.Both F and N are measured in units of force (such as Newtons or Pounds), so the coefficient of friction is dimensionless. The coefficient of friction has different values for static friction and sliding friction.In stiction, the frictional force resists the force applied to the object and the object remains stationary until the force of stiction is overcome. In kinetic friction, the frictional force opposes the motion of an object.To learn more about coefficient of friction, refer to:
brainly.com/question/20241845
#SPJ2
Plz help !!!!!! ................................
Answer:
I think the answer is B. Can I have brainlest if I am right, please?
Explanation:
Answer:
it is B because period =1/ frequency and B has lower period
10. A golf ball is propelled with an initial velocity of 60
meters per second at 37° above the horizontal. The
horizontal component of the golf ball's initial veloc-
ity is
the horizontal component of the golf ball's initial velocity is 47.92 m/s.
The given parameters;
initial velocity of the golf, v = 60 m/s
angle of projection of the golf, Ф = 37°
The horizontal component of the golf ball's initial velocity is calculated as follows;
[tex]v_0_x = v\times cos(\theta)\\\\[/tex]
[tex]v_0_x[/tex] = 60 m/s x cos (37)
[tex]v_0_x[/tex] = 60 m/s x 0.7986
[tex]v_0_x[/tex] = 47.92 m/s
Thus, the horizontal component of the golf ball's initial velocity is 47.92 m/s.
Learn more here: https://brainly.com/question/14304606
plz help urgent
will give brainliest
Answer:
D
Explanation:
Highest Pressure in water is always at the bottom
What is the common property of the elements pinctogen
Answer:
The pnictogens consist of two non-metals, two metalloids, one metal, and one element with unknown chemical properties. All the elements in the group are solids at room temperature, except for nitrogen which is gaseous at room temperature.
A baseball bat is a lever. Which of the following explains how a baseball bat differs from a lever like a pry bar?
Complete question is;
A baseball bat is a lever. Which of the following explains how a baseball bat differs from a lever like a pry bar?
A) In a baseball bat, effort force is smaller and is applied over a large distance, while the resistance force is smaller and is applied over a long distance.
B) In a baseball bat, effort force is smaller and is applied over a large distance, while the resistance force is smaller and is applied over a short distance.
C) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a long distance.
D) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a short distance.
Answer:
C) In a baseball bat, effort force is larger and is applied over a short distance, while the resistance force is smaller and is applied over a long distance.
Explanation:
The correct answer is option C. This is because unlike in a pry bar, the effort force when swinging a baseball bat is larger and it is applied over a short distance; and in return the resisting force is smaller and it's applied over a long distance.
whats the net force
Answer:
13n pushing left
Explanation:
1563 - 1550
How should the student change the circuit to give negative values for current and
potential difference?
Answer:
changing the polarity or direction of the battery changes the sign of the voltage and the current
Explanation:
The sign of current and voltage are due to established conventions.
The way that a DC circuit with negative current values is by changing the polarity of the power source or by inverting the battery, this creates that the electrons move in the opposite direction
Changing the battery also changes the direction of the power difference, since the potential from positive to negative, in most cases negative is assigned a potential of zero volts
In summary, changing the polarity or direction of the battery changes the sign of the voltage and the current
would someone just answer this now?
Answer:
x=36.5 m
Explanation:
Rectangular Components of a Vector
A vector can be expressed as an ordered pair (x,y) where x is the x-coordinate, and y is the y-coordinate of a rectangular system.
It can also be given as a magnitude-angle pair (r,θ) where θ is measured from the positive x-axis. It's also known as polar coordinates.
The conversion from polar to rectangular coordinates is:
[tex]x=r\cos \theta[/tex]
[tex]y=r\sin\theta[/tex]
We are given the vector as a magnitude r=47.3 m and at an angle θ=39.4°. The x-component of the vector is:
[tex]x=47.3\cos (39.4^\circ)[/tex]
Using a scientific calculator to find the trigonometric function:
[tex]x=47.3\cdot 0.7716[/tex]
x=36.5 m
The motion of a car on a position time graph is represented with a horizontal tine What does this indicate about the car's motion?
Answer:
Position-Time graphs display the motion of a object by showing the changes of velocity with respect to time.
The motion of a car on a position-time graph that is represented with a horizontal line indicates that the car has stopped moving.
A straight line with a positive slope indicates that the car is moving at a constant velocity, and thus the slope is constant. On the other hand, a curve with a changing slope, shows that the velocity is changing.
YO YO I NEED HELP!!!
Answer: Light energy
Explanation: Light energy is a form of radiant energy that is visible to the human eye.
When a wire moves through a magnetic field, an electric current is produced in the wire. Why does this phenomenon occur?
Answer:
The negative charges and positive charges in the wire are pushed in the opposite directions by the magnetic field .
Explanation:
Hope this helps
When a wire moves through a magnetic field, an electric current is produced in the wire, and the phenomenon to which this is referring is called electromagnetic induction, as presented in option A.
What is electromagnetic induction?A magnetic field is a region in space where a magnetic force can be detected, so when a wire moves through a magnetic field, the magnetic force exerted on the wire generates a voltage, and the voltage creates an electric current in the wire. This electromagnetic induction phenomenon occurs because of the movement of charged particles within the wire, and this phenomenon can be explained by Faraday's Law of Electromagnetic Induction.
Hence, an electric current is produced in the wire, and the phenomenon to which this is referring is called electromagnetic induction, as presented in option A.
Learn more about electromagnetic induction here.
https://brainly.com/question/26334813
#SPJ6
The question is incomplete, complete question is below
When a wire moves through a magnetic field, an electric current is produced in the wire. Why does this phenomenon occur?
A) electromagnetic induction
B)magnetic force
A runner is training and runs past meter mark 65 and starts a stopwatch. After the runner passes meter mark 15 the stopwatch stops at 8 seconds. What was the runners velocity?
Question 5 options:
-6.25 m/s
6.25 m/s
8.13 m/s
-1.88 m/s
Answer:
-6.25 m/s
Explanation:
i took the quiz
pls help i will give u brianliest!
Answer:
Explanation:
neautrons and protons
A paintball is fired horizontally from a tower 45 m above the ground. If the paintball gun fires at 90 m/s… How long does it take for the paintball to hit the ground? How far away from the tower will the paintball land?
Answer:
The time taken for the paint ball to hit the ground is [tex]t = 2.143 \ s[/tex]
The distance of the landing point from the tower is [tex]d = 192.86 \ m[/tex]
Explanation:
From the question we are told that
The height of the tower is [tex]h = 45 \ m[/tex]
The speed of the paintball in the horizontal direction is [tex]v_x = 90 \ m/s[/tex]
Generally from kinematic equation we have that
[tex]h = ut + \frac{1}{2} at^2[/tex]
Here u is the initial velocity of the paintball in the vertical direction and the value is 0 m/s , this because the ball was fired horizontally
a is equivalent to [tex]g = 9.8\ m/s^2[/tex]
t is the time taken for the paintball to hit the ground
So
[tex]45 = 0* t + \frac{1}{2} 9.8 * t^2[/tex]
=> [tex]t = 2.143 \ s[/tex]
Generally the distance of its landing position from the tower is
[tex]d = v * t[/tex]
=> [tex]d = 90 * 2.143[/tex]
=> [tex]d = 192.86 \ m[/tex]
Students in a science class were provided with this image and asked to identify which color of light would refract the most if white light was passed through a prism?which student below identified the correct color of light with the proper justification?
The identification of the correct color of the light with the proper justification would be by student 4: violet, because it has the highest frequency, therefore the correct answer is option D.
What is Wavelength?It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.
As given in the problem, students in a science class were provided with this image and asked to identify which color of light would refract the most if white light was passed through a prism.
Student 4 would correctly identify and justify violet as the appropriate hue of the light since it has the greatest frequency, making option D the right response.
To learn more about wavelength from here, refer to the link;
brainly.com/question/7143261
#SPJ2
15 POINTS URGENT DUE IN 5 MINUTES :(
please don’t troll.
A. A woman hiked on a trail up a mountainShe slowed down as it became more steep. She stopped at the top to take in the view below. Then she continued on the trail and walked down the other side of the mountain.
B. A truck driver left a warehouse and drove on a highway at a constant speed before he stopped for lunch. To make up for lost time, he drove faster when he got back on the highway. He unloaded his haul and drove quickly back to the warehouse.
C. A woman drove her car up steep bill and stopped at a red lightWhen the light turned green she continued to drive up the rest of the hill until she reached the gas station. She stopped to buy gas and then drove down the other side of the hill towards her office.
D. A man ran in a race and accelerated steadily for the first hour. He then continued briefly at a constant pace while he had the lead. When other runners began to catch up he accelerated againHe then continued at a constant high speed. He became overtired and slowed down until he had to completely stop running.
Answer:
D now go to ur good life :)
Explanation:
Answer:
blah
Explanation:
blah